提交 f5b35d0b 编写于 作者: G Gabor Juhos 提交者: Ralf Baechle

MIPS: ath79: add common WMAC device for AR913X based boards

Add common platform_device and helper code to make the registration
of the built-in wireless MAC easier on the Atheros AR9130/AR9132
based boards. Also register the WMAC device on the AR81 board.
Signed-off-by: NGabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Imre Kaloz <kaloz@openwrt.org>,
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1962/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
上级 aa6695ec
......@@ -5,6 +5,7 @@ menu "Atheros AR71XX/AR724X/AR913X machine selection"
config ATH79_MACH_AP81
bool "Atheros AP81 reference board"
select SOC_AR913X
select ATH79_DEV_AR913X_WMAC
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_SPI
......@@ -33,6 +34,10 @@ config SOC_AR724X
config SOC_AR913X
def_bool n
config ATH79_DEV_AR913X_WMAC
depends on SOC_AR913X
def_bool n
config ATH79_DEV_GPIO_BUTTONS
def_bool n
......
......@@ -16,6 +16,7 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
# Devices
#
obj-y += dev-common.o
obj-$(CONFIG_ATH79_DEV_AR913X_WMAC) += dev-ar913x-wmac.o
obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o
obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o
obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o
......
/*
* Atheros AR913X SoC built-in WMAC device support
*
* Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/ath9k_platform.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "dev-ar913x-wmac.h"
static struct ath9k_platform_data ar913x_wmac_data;
static struct resource ar913x_wmac_resources[] = {
{
.start = AR913X_WMAC_BASE,
.end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1,
.flags = IORESOURCE_MEM,
}, {
.start = ATH79_CPU_IRQ_IP2,
.end = ATH79_CPU_IRQ_IP2,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device ar913x_wmac_device = {
.name = "ath9k",
.id = -1,
.resource = ar913x_wmac_resources,
.num_resources = ARRAY_SIZE(ar913x_wmac_resources),
.dev = {
.platform_data = &ar913x_wmac_data,
},
};
void __init ath79_register_ar913x_wmac(u8 *cal_data)
{
if (cal_data)
memcpy(ar913x_wmac_data.eeprom_data, cal_data,
sizeof(ar913x_wmac_data.eeprom_data));
/* reset the WMAC */
ath79_device_reset_set(AR913X_RESET_AMBA2WMAC);
mdelay(10);
ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC);
mdelay(10);
platform_device_register(&ar913x_wmac_device);
}
/*
* Atheros AR913X SoC built-in WMAC device support
*
* Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#ifndef _ATH79_DEV_AR913X_WMAC_H
#define _ATH79_DEV_AR913X_WMAC_H
void ath79_register_ar913x_wmac(u8 *cal_data);
#endif /* _ATH79_DEV_AR913X_WMAC_H */
......@@ -10,6 +10,7 @@
*/
#include "machtypes.h"
#include "dev-ar913x-wmac.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-spi.h"
......@@ -25,6 +26,8 @@
#define AP81_KEYS_POLL_INTERVAL 20 /* msecs */
#define AP81_KEYS_DEBOUNCE_INTERVAL (3 * AP81_KEYS_POLL_INTERVAL)
#define AP81_CAL_DATA_ADDR 0x1fff1000
static struct gpio_led ap81_leds_gpio[] __initdata = {
{
.name = "ap81:green:status",
......@@ -79,6 +82,8 @@ static struct ath79_spi_platform_data ap81_spi_data = {
static void __init ap81_setup(void)
{
u8 *cal_data = (u8 *) KSEG1ADDR(AP81_CAL_DATA_ADDR);
ath79_register_leds_gpio(-1, ARRAY_SIZE(ap81_leds_gpio),
ap81_leds_gpio);
ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL,
......@@ -86,6 +91,7 @@ static void __init ap81_setup(void)
ap81_gpio_keys);
ath79_register_spi(&ap81_spi_data, ap81_spi_info,
ARRAY_SIZE(ap81_spi_info));
ath79_register_ar913x_wmac(cal_data);
}
MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board",
......
......@@ -34,6 +34,9 @@
#define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000)
#define AR71XX_RESET_SIZE 0x100
#define AR913X_WMAC_BASE (AR71XX_APB_BASE + 0x000C0000)
#define AR913X_WMAC_SIZE 0x30000
/*
* DDR_CTRL block
*/
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册