Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 f568dd7f 编写于 作者: U Uwe Kleine-König
浏览文件
操作

imx/mach-mx3: use constants namespaced by the corresponding SOC (easy part) 

This just leaves cpu.c, devices.c and mm.c to clean up.  As these files
are used on more than one SOC they need some more work.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Cc: Valentin Longchamp <valentin.longchamp@epfl.ch>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: Guennadi Liakhovetski <lg@denx.de>
Cc: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Magnus Lilja <lilja.magnus@gmail.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Harro Haan <hrhaan@yahoo.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Luotao Fu <l.fu@pengutronix.de>
Cc: Ilya Yanok <yanok@emcraft.com>
上级 3f35d1f5
隐藏空白更改
内联 并排
Showing with 75 addition and 75 deletion
arch/arm/mach-mx3/armadillo5x0.c
浏览文件 @ f568dd7f
......@@ -182,8 +182,8 @@ static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
static struct resource armadillo5x0_nor_flash_resource = {
.flags = IORESOURCE_MEM,
.start = CS0_BASE_ADDR,
.end = CS0_BASE_ADDR + SZ_64M - 1,
.start = MX31_CS0_BASE_ADDR,
.end = MX31_CS0_BASE_ADDR + SZ_64M - 1,
};
static struct platform_device armadillo5x0_nor_flash = {
......@@ -311,8 +311,8 @@ static struct imxmmc_platform_data sdhc_pdata = {
*/
static struct resource armadillo5x0_smc911x_resources[] = {
{
.start = CS3_BASE_ADDR,
.end = CS3_BASE_ADDR + SZ_32M - 1,
.start = MX31_CS3_BASE_ADDR,
.end = MX31_CS3_BASE_ADDR + SZ_32M - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
......@@ -406,8 +406,8 @@ static struct sys_timer armadillo5x0_timer = {
MACHINE_START(ARMADILLO5X0, "Armadillo-500")
/* Maintainer: Alberto Panizzo */
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = ((MX31_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x00000100,
.map_io = mx31_map_io,
.init_irq = mx31_init_irq,
......
arch/arm/mach-mx3/clock-imx35.c
浏览文件 @ f568dd7f
......@@ -28,7 +28,7 @@
#include <mach/hardware.h>
#include <mach/common.h>
#define CCM_BASE IO_ADDRESS(CCM_BASE_ADDR)
#define CCM_BASE IO_ADDRESS(MX35_CCM_BASE_ADDR)
#define CCM_CCMR 0x00
#define CCM_PDR0 0x04
......@@ -504,7 +504,7 @@ int __init mx35_clocks_init()
__raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
__raw_writel(0, CCM_BASE + CCM_CGR3);
mxc_timer_init(&gpt_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
mxc_timer_init(&gpt_clk, IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
return 0;
}
......
arch/arm/mach-mx3/clock.c
浏览文件 @ f568dd7f
......@@ -618,14 +618,14 @@ int __init mx31_clocks_init(unsigned long fref)
mx31_read_cpu_rev();
if (mx31_revision() >= CHIP_REV_2_0) {
if (mx31_revision() >= MX31_CHIP_REV_2_0) {
reg = __raw_readl(MXC_CCM_PMCR1);
/* No PLL restart on DVFS switch; enable auto EMI handshake */
reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN;
__raw_writel(reg, MXC_CCM_PMCR1);
}
mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
mxc_timer_init(&ipg_clk, IO_ADDRESS(MX31_GPT1_BASE_ADDR), MX31_INT_GPT);
return 0;
}
......
arch/arm/mach-mx3/crm_regs.h
浏览文件 @ f568dd7f
......@@ -24,7 +24,7 @@
#define CKIH_CLK_FREQ_27MHZ 27000000
#define CKIL_CLK_FREQ 32768
#define MXC_CCM_BASE IO_ADDRESS(CCM_BASE_ADDR)
#define MXC_CCM_BASE IO_ADDRESS(MX31_CCM_BASE_ADDR)
/* Register addresses */
#define MXC_CCM_CCMR (MXC_CCM_BASE + 0x00)
......
arch/arm/mach-mx3/iomux.c
浏览文件 @ f568dd7f
......@@ -29,7 +29,7 @@
/*
* IOMUX register (base) addresses
*/
#define IOMUX_BASE IO_ADDRESS(IOMUXC_BASE_ADDR)
#define IOMUX_BASE IO_ADDRESS(MX31_IOMUXC_BASE_ADDR)
#define IOMUXINT_OBS1 (IOMUX_BASE + 0x000)
#define IOMUXINT_OBS2 (IOMUX_BASE + 0x004)
#define IOMUXGPR (IOMUX_BASE + 0x008)
......
arch/arm/mach-mx3/kzmarm11.c
浏览文件 @ f568dd7f
......@@ -128,8 +128,8 @@ static struct smsc911x_platform_config kzm_smsc9118_config = {
static struct resource kzm_smsc9118_resources[] = {
{
.start = CS5_BASE_ADDR,
.end = CS5_BASE_ADDR + SZ_128K - 1,
.start = MX31_CS5_BASE_ADDR,
.end = MX31_CS5_BASE_ADDR + SZ_128K - 1,
.flags = IORESOURCE_MEM,
},
{
......@@ -222,15 +222,15 @@ static void __init kzm_board_init(void)
*/
static struct map_desc kzm_io_desc[] __initdata = {
{
.virtual = CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(CS4_BASE_ADDR),
.length = CS4_SIZE,
.virtual = MX31_CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
.length = MX31_CS4_SIZE,
.type = MT_DEVICE
},
{
.virtual = CS5_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(CS5_BASE_ADDR),
.length = CS5_SIZE,
.virtual = MX31_CS5_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
.length = MX31_CS5_SIZE,
.type = MT_DEVICE
},
};
......@@ -258,8 +258,8 @@ static struct sys_timer kzm_timer = {
* initialize __mach_desc_KZM_ARM11_01 data structure.
*/
MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = ((MX31_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = kzm_map_io,
.init_irq = mx31_init_irq,
......
arch/arm/mach-mx3/mx31ads.c
浏览文件 @ f568dd7f
......@@ -60,7 +60,7 @@
static struct plat_serial8250_port serial_platform_data[] = {
{
.membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA),
.mapbase = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTA),
.mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA),
.irq = EXPIO_INT_XUART_INTA,
.uartclk = 14745600,
.regshift = 0,
......@@ -68,7 +68,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
}, {
.membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB),
.mapbase = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTB),
.mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB),
.irq = EXPIO_INT_XUART_INTB,
.uartclk = 14745600,
.regshift = 0,
......@@ -494,9 +494,9 @@ static void mxc_init_i2c(void)
*/
static struct map_desc mx31ads_io_desc[] __initdata = {
{
.virtual = CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(CS4_BASE_ADDR),
.length = CS4_SIZE / 2,
.virtual = MX31_CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
.length = MX31_CS4_SIZE / 2,
.type = MT_DEVICE
},
};
......@@ -541,8 +541,8 @@ static struct sys_timer mx31ads_timer = {
*/
MACHINE_START(MX31ADS, "Freescale MX31ADS")
/* Maintainer: Freescale Semiconductor, Inc. */
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = ((MX31_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31ads_map_io,
.init_irq = mx31ads_init_irq,
......
arch/arm/mach-mx3/mx31lilly.c
浏览文件 @ f568dd7f
......@@ -57,8 +57,8 @@
static struct resource smsc91x_resources[] = {
{
.start = CS4_BASE_ADDR,
.end = CS4_BASE_ADDR + 0xffff,
.start = MX31_CS4_BASE_ADDR,
.end = MX31_CS4_BASE_ADDR + 0xffff,
.flags = IORESOURCE_MEM,
},
{
......@@ -195,8 +195,8 @@ static struct sys_timer mx31lilly_timer = {
};
MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = ((MX31_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31_map_io,
.init_irq = mx31_init_irq,
......
arch/arm/mach-mx3/mx31lite.c
浏览文件 @ f568dd7f
......@@ -82,8 +82,8 @@ static struct smsc911x_platform_config smsc911x_config = {
static struct resource smsc911x_resources[] = {
{
.start = CS4_BASE_ADDR,
.end = CS4_BASE_ADDR + 0x100,
.start = MX31_CS4_BASE_ADDR,
.end = MX31_CS4_BASE_ADDR + 0x100,
.flags = IORESOURCE_MEM,
}, {
.start = IOMUX_TO_IRQ(MX31_PIN_SFS6),
......@@ -214,9 +214,9 @@ static struct platform_device physmap_flash_device = {
*/
static struct map_desc mx31lite_io_desc[] __initdata = {
{
.virtual = CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(CS4_BASE_ADDR),
.length = CS4_SIZE,
.virtual = MX31_CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
.length = MX31_CS4_SIZE,
.type = MT_DEVICE
}
};
......@@ -287,8 +287,8 @@ struct sys_timer mx31lite_timer = {
MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
/* Maintainer: Freescale Semiconductor, Inc. */
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = ((MX31_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31lite_map_io,
.init_irq = mx31_init_irq,
......
arch/arm/mach-mx3/mx31moboard.c
浏览文件 @ f568dd7f
......@@ -569,8 +569,8 @@ struct sys_timer mx31moboard_timer = {
MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
/* Maintainer: Valentin Longchamp, EPFL Mobots group */
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = ((MX31_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31_map_io,
.init_irq = mx31_init_irq,
......
arch/arm/mach-mx3/mx31pdk.c
浏览文件 @ f568dd7f
......@@ -211,9 +211,9 @@ static int __init mx31pdk_init_expio(void)
*/
static struct map_desc mx31pdk_io_desc[] __initdata = {
{
.virtual = CS5_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(CS5_BASE_ADDR),
.length = CS5_SIZE,
.virtual = MX31_CS5_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
.length = MX31_CS5_SIZE,
.type = MT_DEVICE,
},
};
......@@ -256,8 +256,8 @@ static struct sys_timer mx31pdk_timer = {
*/
MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
/* Maintainer: Freescale Semiconductor, Inc. */
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = ((MX31_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31pdk_map_io,
.init_irq = mx31_init_irq,
......
arch/arm/mach-mx3/mx35pdk.c
浏览文件 @ f568dd7f
......@@ -106,8 +106,8 @@ struct sys_timer mx35pdk_timer = {
MACHINE_START(MX35_3DS, "Freescale MX35PDK")
/* Maintainer: Freescale Semiconductor, Inc */
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.phys_io = MX35_AIPS1_BASE_ADDR,
.io_pg_offst = ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx35_map_io,
.init_irq = mx35_init_irq,
......
arch/arm/mach-mx3/pcm037.c
浏览文件 @ f568dd7f
......@@ -248,8 +248,8 @@ static struct imxuart_platform_data uart_pdata = {
static struct resource smsc911x_resources[] = {
{
.start = CS1_BASE_ADDR + 0x300,
.end = CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
.start = MX31_CS1_BASE_ADDR + 0x300,
.end = MX31_CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
......@@ -281,8 +281,8 @@ static struct platdata_mtd_ram pcm038_sram_data = {
};
static struct resource pcm038_sram_resource = {
.start = CS4_BASE_ADDR,
.end = CS4_BASE_ADDR + 512 * 1024 - 1,
.start = MX31_CS4_BASE_ADDR,
.end = MX31_CS4_BASE_ADDR + 512 * 1024 - 1,
.flags = IORESOURCE_MEM,
};
......@@ -536,8 +536,8 @@ static struct mx3fb_platform_data mx3fb_pdata = {
static struct resource pcm970_sja1000_resources[] = {
{
.start = CS5_BASE_ADDR,
.end = CS5_BASE_ADDR + 0x100 - 1,
.start = MX31_CS5_BASE_ADDR,
.end = MX31_CS5_BASE_ADDR + 0x100 - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
......@@ -636,8 +636,8 @@ struct sys_timer pcm037_timer = {
MACHINE_START(PCM037, "Phytec Phycore pcm037")
/* Maintainer: Pengutronix */
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = ((MX31_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31_map_io,
.init_irq = mx31_init_irq,
......
arch/arm/mach-mx3/pcm043.c
浏览文件 @ f568dd7f
......@@ -248,8 +248,8 @@ struct sys_timer pcm043_timer = {
MACHINE_START(PCM043, "Phytec Phycore pcm043")
/* Maintainer: Pengutronix */
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.phys_io = MX35_AIPS1_BASE_ADDR,
.io_pg_offst = ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx35_map_io,
.init_irq = mx35_init_irq,
......
arch/arm/mach-mx3/qong.c
浏览文件 @ f568dd7f
......@@ -43,7 +43,7 @@
#define QONG_FPGA_VERSION(major, minor, rev) \
(((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF))
#define QONG_FPGA_BASEADDR CS1_BASE_ADDR
#define QONG_FPGA_BASEADDR MX31_CS1_BASE_ADDR
#define QONG_FPGA_PERIPH_SIZE (1 << 24)
#define QONG_FPGA_CTRL_BASEADDR QONG_FPGA_BASEADDR
......@@ -115,8 +115,8 @@ static struct physmap_flash_data qong_flash_data = {
};
static struct resource qong_flash_resource = {
.start = CS0_BASE_ADDR,
.end = CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
.start = MX31_CS0_BASE_ADDR,
.end = MX31_CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
.flags = IORESOURCE_MEM,
};
......@@ -180,8 +180,8 @@ static struct platform_nand_data qong_nand_data = {
};
static struct resource qong_nand_resource = {
.start = CS3_BASE_ADDR,
.end = CS3_BASE_ADDR + SZ_32M - 1,
.start = MX31_CS3_BASE_ADDR,
.end = MX31_CS3_BASE_ADDR + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
......@@ -275,8 +275,8 @@ static struct sys_timer qong_timer = {
MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
/* Maintainer: DENX Software Engineering GmbH */
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = ((MX31_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31_map_io,
.init_irq = mx31_init_irq,
......
arch/arm/plat-mxc/include/mach/board-kzmarm11.h
浏览文件 @ f568dd7f
......@@ -21,19 +21,19 @@
/*
* KZM-ARM11-01 Board Control Registers on FPGA
*/
#define KZM_ARM11_CTL1 (CS4_BASE_ADDR + 0x1000)
#define KZM_ARM11_CTL2 (CS4_BASE_ADDR + 0x1001)
#define KZM_ARM11_RSW1 (CS4_BASE_ADDR + 0x1002)
#define KZM_ARM11_BACK_LIGHT (CS4_BASE_ADDR + 0x1004)
#define KZM_ARM11_FPGA_REV (CS4_BASE_ADDR + 0x1008)
#define KZM_ARM11_7SEG_LED (CS4_BASE_ADDR + 0x1010)
#define KZM_ARM11_LEDS (CS4_BASE_ADDR + 0x1020)
#define KZM_ARM11_DIPSW2 (CS4_BASE_ADDR + 0x1003)
#define KZM_ARM11_CTL1 (MX31_CS4_BASE_ADDR + 0x1000)
#define KZM_ARM11_CTL2 (MX31_CS4_BASE_ADDR + 0x1001)
#define KZM_ARM11_RSW1 (MX31_CS4_BASE_ADDR + 0x1002)
#define KZM_ARM11_BACK_LIGHT (MX31_CS4_BASE_ADDR + 0x1004)
#define KZM_ARM11_FPGA_REV (MX31_CS4_BASE_ADDR + 0x1008)
#define KZM_ARM11_7SEG_LED (MX31_CS4_BASE_ADDR + 0x1010)
#define KZM_ARM11_LEDS (MX31_CS4_BASE_ADDR + 0x1020)
#define KZM_ARM11_DIPSW2 (MX31_CS4_BASE_ADDR + 0x1003)
/*
* External UART for touch panel on FPGA
*/
#define KZM_ARM11_16550 (CS4_BASE_ADDR + 0x1050)
#define KZM_ARM11_16550 (MX31_CS4_BASE_ADDR + 0x1050)
#endif /* __ARM_ARCH_BOARD_KZM_ARM11_H */
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或