提交 f548897f 编写于 作者: S Shawn Guo 提交者: Sascha Hauer

arm/imx: remove cpu_is_xxx() check from __imx_ioremap()

This patch adds an ioremap hook imx_ioremap to be called in
__imx_ioremap().  Any soc that needs a customized ioremap other
than __arm_ioremap() can set up this hook in soc specific call.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
上级 41e7daf2
......@@ -58,6 +58,23 @@ static void imx3_idle(void)
: "=r" (reg));
}
static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size,
unsigned int mtype)
{
if (mtype == MT_DEVICE) {
/*
* Access all peripherals below 0x80000000 as nonshared device
* on mx3, but leave l2cc alone. Otherwise cache corruptions
* can occur.
*/
if (phys_addr < 0x80000000 &&
!addr_in_module(phys_addr, MX3x_L2CC))
mtype = MT_DEVICE_NONSHARED;
}
return __arm_ioremap(phys_addr, size, mtype);
}
void imx3_init_l2x0(void)
{
void __iomem *l2x0_base;
......@@ -127,6 +144,7 @@ void __init imx31_init_early(void)
mxc_set_cpu_type(MXC_CPU_MX31);
mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
imx_idle = imx3_idle;
imx_ioremap = imx3_ioremap;
}
void __init imx35_init_early(void)
......@@ -135,6 +153,7 @@ void __init imx35_init_early(void)
mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
imx_idle = imx3_idle;
imx_ioremap = imx3_ioremap;
}
void __init mx31_init_irq(void)
......
......@@ -14,32 +14,22 @@
/* Allow IO space to be anywhere in the memory */
#define IO_SPACE_LIMIT 0xffffffff
#if defined(CONFIG_SOC_IMX31) || defined(CONFIG_SOC_IMX35)
#include <mach/hardware.h>
#define __arch_ioremap __imx_ioremap
#define __arch_iounmap __iounmap
#define addr_in_module(addr, mod) \
((unsigned long)(addr) - mod ## _BASE_ADDR < mod ## _SIZE)
extern void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int);
static inline void __iomem *
__imx_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
{
if (mtype == MT_DEVICE && (cpu_is_mx31() || cpu_is_mx35())) {
/*
* Access all peripherals below 0x80000000 as nonshared device
* on mx3, but leave l2cc alone. Otherwise cache corruptions
* can occur.
*/
if (phys_addr < 0x80000000 &&
!addr_in_module(phys_addr, MX3x_L2CC))
mtype = MT_DEVICE_NONSHARED;
}
return __arm_ioremap(phys_addr, size, mtype);
if (imx_ioremap != NULL)
return imx_ioremap(phys_addr, size, mtype);
else
return __arm_ioremap(phys_addr, size, mtype);
}
#endif
/* io address mapping macro */
#define __io(a) __typesafe_io(a)
......
......@@ -29,6 +29,7 @@
#include <asm/mach-types.h>
void (*imx_idle)(void) = NULL;
void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int) = NULL;
static void __iomem *wdog_base;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册