r8169: update phy init parameters

The modified parameters are synced with Realtek's driver
version 8.006.00.

The change should only be noticeable with some 8168c.
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>

drivers/net/r8169.c

@@ -1379,26 +1379,45 @@ static void rtl8168c_hw_phy_config(void __iomem *ioaddr)
 		{ 0x1f, 0x0003 },
 		{ 0x12, 0xc096 },
 		{ 0x16, 0x000a },
-		{ 0x1f, 0x0000 }
+		{ 0x1f, 0x0000 },
+		{ 0x1f, 0x0000 },
+		{ 0x09, 0x2000 },
+		{ 0x09, 0x0000 }
 	};
 
 	rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+
+	mdio_patch(ioaddr, 0x14, 1 << 5);
+	mdio_patch(ioaddr, 0x0d, 1 << 5);
+	mdio_write(ioaddr, 0x1f, 0x0000);
 }
 
 static void rtl8168cx_hw_phy_config(void __iomem *ioaddr)
 {
 	struct phy_reg phy_reg_init[] = {
-		{ 0x1f, 0x0000 },
+		{ 0x1f, 0x0001 },
 		{ 0x12, 0x2300 },
-		{ 0x1f, 0x0003 },
-		{ 0x16, 0x0f0a },
-		{ 0x1f, 0x0000 },
+		{ 0x03, 0x802f },
+		{ 0x02, 0x4f02 },
+		{ 0x01, 0x0409 },
+		{ 0x00, 0xf099 },
+		{ 0x04, 0x9800 },
+		{ 0x04, 0x9000 },
+		{ 0x1d, 0x3d98 },
 		{ 0x1f, 0x0002 },
 		{ 0x0c, 0x7eb8 },
+		{ 0x06, 0x0761 },
+		{ 0x1f, 0x0003 },
+		{ 0x16, 0x0f0a },
 		{ 0x1f, 0x0000 }
 	};
 
 	rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+
+	mdio_patch(ioaddr, 0x16, 1 << 0);
+	mdio_patch(ioaddr, 0x14, 1 << 5);
+	mdio_patch(ioaddr, 0x0d, 1 << 5);
+	mdio_write(ioaddr, 0x1f, 0x0000);
 }
 
 static void rtl8102e_hw_phy_config(void __iomem *ioaddr)