thermal: exynos: Add TMU features to check instead of using SOC type

This patch adds several features supported by TMU as bitfields.
This features varies across different SOC type and comparing
the features present in the TMU is more logical than comparing
the soc itself.
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>

drivers/thermal/samsung/exynos_tmu.c

@@ -142,13 +142,15 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
 	mutex_lock(&data->lock);
 	clk_enable(data->clk);
 
-	status = readb(data->base + reg->tmu_status);
-	if (!status) {
-		ret = -EBUSY;
-		goto out;
+	if (TMU_SUPPORTS(pdata, READY_STATUS)) {
+		status = readb(data->base + reg->tmu_status);
+		if (!status) {
+			ret = -EBUSY;
+			goto out;
+		}
 	}
 
-	if (data->soc == SOC_ARCH_EXYNOS)
+	if (TMU_SUPPORTS(pdata, TRIM_RELOAD))
 		__raw_writel(1, data->base + reg->triminfo_ctrl);
 
 	/* Save trimming info in order to perform calibration */
@@ -287,7 +289,7 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
 			pdata->trigger_enable[2] << reg->inten_rise2_shift |
 			pdata->trigger_enable[1] << reg->inten_rise1_shift |
 			pdata->trigger_enable[0] << reg->inten_rise0_shift;
-		if (pdata->threshold_falling)
+		if (TMU_SUPPORTS(pdata, FALLING_TRIP))
 			interrupt_en |=
 				interrupt_en << reg->inten_fall0_shift;
 	} else {
@@ -329,7 +331,7 @@ static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp)
 	unsigned int val;
 	int ret = -EINVAL;
 
-	if (data->soc == SOC_ARCH_EXYNOS4210)
+	if (!TMU_SUPPORTS(pdata, EMULATION))
 		goto out;
 
 	if (temp && temp < MCELSIUS)
@@ -343,9 +345,13 @@ static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp)
 	if (temp) {
 		temp /= MCELSIUS;
 
-		val = (EXYNOS_EMUL_TIME << reg->emul_time_shift) |
-			(temp_to_code(data, temp)
-			 << reg->emul_temp_shift) | EXYNOS_EMUL_ENABLE;
+		if (TMU_SUPPORTS(pdata, EMUL_TIME)) {
+			val &= ~(EXYNOS_EMUL_TIME_MASK << reg->emul_time_shift);
+			val |= (EXYNOS_EMUL_TIME << reg->emul_time_shift);
+		}
+		val &= ~(EXYNOS_EMUL_DATA_MASK << reg->emul_temp_shift);
+		val |= (temp_to_code(data, temp) << reg->emul_temp_shift) |
+			EXYNOS_EMUL_ENABLE;
 	} else {
 		val &= ~EXYNOS_EMUL_ENABLE;
 	}

drivers/thermal/samsung/exynos_tmu.h

@@ -42,6 +42,34 @@ enum soc_type {
 	SOC_ARCH_EXYNOS,
 };
 
+/**
+ * EXYNOS TMU supported features.
+ * TMU_SUPPORT_EMULATION - This features is used to set user defined
+ *			temperature to the TMU controller.
+ * TMU_SUPPORT_MULTI_INST - This features denotes that the soc
+ *			has many instances of TMU.
+ * TMU_SUPPORT_TRIM_RELOAD - This features shows that trimming can
+ *			be reloaded.
+ * TMU_SUPPORT_FALLING_TRIP - This features shows that interrupt can
+ *			be registered for falling trips also.
+ * TMU_SUPPORT_READY_STATUS - This feature tells that the TMU current
+ *			state(active/idle) can be checked.
+ * TMU_SUPPORT_EMUL_TIME - This features allows to set next temp emulation
+ *			sample time.
+ * TMU_SUPPORT_SHARED_MEMORY - This feature tells that the different TMU
+ *			sensors shares some common registers.
+ * TMU_SUPPORT - macro to compare the above features with the supplied.
+ */
+#define TMU_SUPPORT_EMULATION			BIT(0)
+#define TMU_SUPPORT_MULTI_INST			BIT(1)
+#define TMU_SUPPORT_TRIM_RELOAD			BIT(2)
+#define TMU_SUPPORT_FALLING_TRIP		BIT(3)
+#define TMU_SUPPORT_READY_STATUS		BIT(4)
+#define TMU_SUPPORT_EMUL_TIME			BIT(5)
+#define TMU_SUPPORT_SHARED_MEMORY		BIT(6)
+
+#define TMU_SUPPORTS(a, b)	(a->features & TMU_SUPPORT_ ## b)
+
 /**
  * struct exynos_tmu_register - register descriptors to access registers and
  * bitfields. The register validity, offsets and bitfield values may vary
@@ -222,6 +250,8 @@ struct exynos_tmu_registers {
  *	applicable to only some of the trigger levels.
  * @registers: Pointer to structure containing all the TMU controller registers
  *	and bitfields shifts and masks.
+ * @features: a bitfield value indicating the features supported in SOC like
+ *	emulation, multi instance etc
  *
  * This structure is required for configuration of exynos_tmu driver.
  */
@@ -249,6 +279,7 @@ struct exynos_tmu_platform_data {
 	struct freq_clip_table freq_tab[4];
 	unsigned int freq_tab_count;
 	const struct exynos_tmu_registers *registers;
+	unsigned int features;
 };
 
 /**

drivers/thermal/samsung/exynos_tmu_data.c

@@ -83,6 +83,7 @@ struct exynos_tmu_init_data const exynos4210_default_tmu_data = {
 		.freq_tab_count = 2,
 		.type = SOC_ARCH_EXYNOS4210,
 		.registers = &exynos4210_tmu_registers,
+		.features = TMU_SUPPORT_READY_STATUS,
 		},
 	},
 	.tmu_count = 1,
@@ -162,7 +163,10 @@ static const struct exynos_tmu_registers exynos5250_tmu_registers = {
 	}, \
 	.freq_tab_count = 2, \
 	.type = SOC_ARCH_EXYNOS, \
-	.registers = &exynos5250_tmu_registers,
+	.registers = &exynos5250_tmu_registers, \
+	.features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
+			TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
+			TMU_SUPPORT_EMUL_TIME)
 
 struct exynos_tmu_init_data const exynos5250_default_tmu_data = {
 	.tmu_data = {