jump label: Make dynamic no-op selection available outside of ftrace

Move Steve's code for finding the best 5-byte no-op from ftrace.c to
alternative.c. The idea is that other consumers (in this case jump label)
want to make use of that code.
Signed-off-by: NJason Baron <jbaron@redhat.com>
LKML-Reference: <96259ae74172dcac99c0020c249743c523a92e18.1284733808.git.jbaron@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

arch/x86/include/asm/alternative.h

@@ -180,4 +180,12 @@ static inline void apply_paravirt(struct paravirt_patch_site *start,
 extern void *text_poke(void *addr, const void *opcode, size_t len);
 extern void *text_poke_smp(void *addr, const void *opcode, size_t len);
 
+#if defined(CONFIG_DYNAMIC_FTRACE)
+#define IDEAL_NOP_SIZE_5 5
+extern unsigned char ideal_nop5[IDEAL_NOP_SIZE_5];
+extern void arch_init_ideal_nop5(void);
+#else
+static inline void arch_init_ideal_nop5(void) {}
+#endif
+
 #endif /* _ASM_X86_ALTERNATIVE_H */

arch/x86/kernel/alternative.c

@@ -641,3 +641,67 @@ void *__kprobes text_poke_smp(void *addr, const void *opcode, size_t len)
 	return addr;
 }
 
+#if defined(CONFIG_DYNAMIC_FTRACE)
+
+unsigned char ideal_nop5[IDEAL_NOP_SIZE_5];
+
+void __init arch_init_ideal_nop5(void)
+{
+	extern const unsigned char ftrace_test_p6nop[];
+	extern const unsigned char ftrace_test_nop5[];
+	extern const unsigned char ftrace_test_jmp[];
+	int faulted = 0;
+
+	/*
+	 * There is no good nop for all x86 archs.
+	 * We will default to using the P6_NOP5, but first we
+	 * will test to make sure that the nop will actually
+	 * work on this CPU. If it faults, we will then
+	 * go to a lesser efficient 5 byte nop. If that fails
+	 * we then just use a jmp as our nop. This isn't the most
+	 * efficient nop, but we can not use a multi part nop
+	 * since we would then risk being preempted in the middle
+	 * of that nop, and if we enabled tracing then, it might
+	 * cause a system crash.
+	 *
+	 * TODO: check the cpuid to determine the best nop.
+	 */
+	asm volatile (
+		"ftrace_test_jmp:"
+		"jmp ftrace_test_p6nop\n"
+		"nop\n"
+		"nop\n"
+		"nop\n"  /* 2 byte jmp + 3 bytes */
+		"ftrace_test_p6nop:"
+		P6_NOP5
+		"jmp 1f\n"
+		"ftrace_test_nop5:"
+		".byte 0x66,0x66,0x66,0x66,0x90\n"
+		"1:"
+		".section .fixup, \"ax\"\n"
+		"2:	movl $1, %0\n"
+		"	jmp ftrace_test_nop5\n"
+		"3:	movl $2, %0\n"
+		"	jmp 1b\n"
+		".previous\n"
+		_ASM_EXTABLE(ftrace_test_p6nop, 2b)
+		_ASM_EXTABLE(ftrace_test_nop5, 3b)
+		: "=r"(faulted) : "0" (faulted));
+
+	switch (faulted) {
+	case 0:
+		pr_info("converting mcount calls to 0f 1f 44 00 00\n");
+		memcpy(ideal_nop5, ftrace_test_p6nop, IDEAL_NOP_SIZE_5);
+		break;
+	case 1:
+		pr_info("converting mcount calls to 66 66 66 66 90\n");
+		memcpy(ideal_nop5, ftrace_test_nop5, IDEAL_NOP_SIZE_5);
+		break;
+	case 2:
+		pr_info("converting mcount calls to jmp . + 5\n");
+		memcpy(ideal_nop5, ftrace_test_jmp, IDEAL_NOP_SIZE_5);
+		break;
+	}
+
+}
+#endif

arch/x86/kernel/ftrace.c

@@ -257,14 +257,9 @@ do_ftrace_mod_code(unsigned long ip, void *new_code)
 	return mod_code_status;
 }
 
-
-
-
-static unsigned char ftrace_nop[MCOUNT_INSN_SIZE];
-
 static unsigned char *ftrace_nop_replace(void)
 {
-	return ftrace_nop;
+	return ideal_nop5;
 }
 
 static int
@@ -338,62 +333,6 @@ int ftrace_update_ftrace_func(ftrace_func_t func)
 
 int __init ftrace_dyn_arch_init(void *data)
 {
-	extern const unsigned char ftrace_test_p6nop[];
-	extern const unsigned char ftrace_test_nop5[];
-	extern const unsigned char ftrace_test_jmp[];
-	int faulted = 0;
-
-	/*
-	 * There is no good nop for all x86 archs.
-	 * We will default to using the P6_NOP5, but first we
-	 * will test to make sure that the nop will actually
-	 * work on this CPU. If it faults, we will then
-	 * go to a lesser efficient 5 byte nop. If that fails
-	 * we then just use a jmp as our nop. This isn't the most
-	 * efficient nop, but we can not use a multi part nop
-	 * since we would then risk being preempted in the middle
-	 * of that nop, and if we enabled tracing then, it might
-	 * cause a system crash.
-	 *
-	 * TODO: check the cpuid to determine the best nop.
-	 */
-	asm volatile (
-		"ftrace_test_jmp:"
-		"jmp ftrace_test_p6nop\n"
-		"nop\n"
-		"nop\n"
-		"nop\n"  /* 2 byte jmp + 3 bytes */
-		"ftrace_test_p6nop:"
-		P6_NOP5
-		"jmp 1f\n"
-		"ftrace_test_nop5:"
-		".byte 0x66,0x66,0x66,0x66,0x90\n"
-		"1:"
-		".section .fixup, \"ax\"\n"
-		"2:	movl $1, %0\n"
-		"	jmp ftrace_test_nop5\n"
-		"3:	movl $2, %0\n"
-		"	jmp 1b\n"
-		".previous\n"
-		_ASM_EXTABLE(ftrace_test_p6nop, 2b)
-		_ASM_EXTABLE(ftrace_test_nop5, 3b)
-		: "=r"(faulted) : "0" (faulted));
-
-	switch (faulted) {
-	case 0:
-		pr_info("converting mcount calls to 0f 1f 44 00 00\n");
-		memcpy(ftrace_nop, ftrace_test_p6nop, MCOUNT_INSN_SIZE);
-		break;
-	case 1:
-		pr_info("converting mcount calls to 66 66 66 66 90\n");
-		memcpy(ftrace_nop, ftrace_test_nop5, MCOUNT_INSN_SIZE);
-		break;
-	case 2:
-		pr_info("converting mcount calls to jmp . + 5\n");
-		memcpy(ftrace_nop, ftrace_test_jmp, MCOUNT_INSN_SIZE);
-		break;
-	}
-
 	/* The return code is retured via data */
 	*(unsigned long *)data = 0;
 

arch/x86/kernel/setup.c

@@ -112,6 +112,7 @@
 #include <asm/numa_64.h>
 #endif
 #include <asm/mce.h>
+#include <asm/alternative.h>
 
 /*
  * end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries.
@@ -726,6 +727,7 @@ void __init setup_arch(char **cmdline_p)
 {
 	int acpi = 0;
 	int k8 = 0;
+	unsigned long flags;
 
 #ifdef CONFIG_X86_32
 	memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
@@ -1071,6 +1073,10 @@ void __init setup_arch(char **cmdline_p)
 	x86_init.oem.banner();
 
 	mcheck_init();
+
+	local_irq_save(flags);
+	arch_init_ideal_nop5();
+	local_irq_restore(flags);
 }
 
 #ifdef CONFIG_X86_32