提交 f3845f3f 编写于 作者: L Linus Torvalds

Merge branch 'x86-fixes-for-linus' of...

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, amd: Restrict usage of c1e_idle()
  x86: Fix placement of FIX_OHCI1394_BASE
  x86: Handle legacy PIC interrupts on all the cpu's
......@@ -82,6 +82,9 @@ enum fixed_addresses {
#endif
FIX_DBGP_BASE,
FIX_EARLYCON_MEM_BASE,
#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
FIX_OHCI1394_BASE,
#endif
#ifdef CONFIG_X86_LOCAL_APIC
FIX_APIC_BASE, /* local (CPU) APIC) -- required for SMP or not */
#endif
......@@ -132,9 +135,6 @@ enum fixed_addresses {
(__end_of_permanent_fixed_addresses & (TOTAL_FIX_BTMAPS - 1))
: __end_of_permanent_fixed_addresses,
FIX_BTMAP_BEGIN = FIX_BTMAP_END + TOTAL_FIX_BTMAPS - 1,
#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
FIX_OHCI1394_BASE,
#endif
#ifdef CONFIG_X86_32
FIX_WP_TEST,
#endif
......
......@@ -133,6 +133,7 @@ extern void (*__initconst interrupt[NR_VECTORS-FIRST_EXTERNAL_VECTOR])(void);
typedef int vector_irq_t[NR_VECTORS];
DECLARE_PER_CPU(vector_irq_t, vector_irq);
extern void setup_vector_irq(int cpu);
#ifdef CONFIG_X86_IO_APIC
extern void lock_vector_lock(void);
......
......@@ -105,6 +105,8 @@
#define MSR_AMD64_PATCH_LEVEL 0x0000008b
#define MSR_AMD64_NB_CFG 0xc001001f
#define MSR_AMD64_PATCH_LOADER 0xc0010020
#define MSR_AMD64_OSVW_ID_LENGTH 0xc0010140
#define MSR_AMD64_OSVW_STATUS 0xc0010141
#define MSR_AMD64_IBSFETCHCTL 0xc0011030
#define MSR_AMD64_IBSFETCHLINAD 0xc0011031
#define MSR_AMD64_IBSFETCHPHYSAD 0xc0011032
......
......@@ -1268,6 +1268,14 @@ void __setup_vector_irq(int cpu)
/* Mark the inuse vectors */
for_each_irq_desc(irq, desc) {
cfg = desc->chip_data;
/*
* If it is a legacy IRQ handled by the legacy PIC, this cpu
* will be part of the irq_cfg's domain.
*/
if (irq < legacy_pic->nr_legacy_irqs && !IO_APIC_IRQ(irq))
cpumask_set_cpu(cpu, cfg->domain);
if (!cpumask_test_cpu(cpu, cfg->domain))
continue;
vector = cfg->vector;
......
......@@ -141,6 +141,28 @@ void __init init_IRQ(void)
x86_init.irqs.intr_init();
}
/*
* Setup the vector to irq mappings.
*/
void setup_vector_irq(int cpu)
{
#ifndef CONFIG_X86_IO_APIC
int irq;
/*
* On most of the platforms, legacy PIC delivers the interrupts on the
* boot cpu. But there are certain platforms where PIC interrupts are
* delivered to multiple cpu's. If the legacy IRQ is handled by the
* legacy PIC, for the new cpu that is coming online, setup the static
* legacy vector to irq mapping:
*/
for (irq = 0; irq < legacy_pic->nr_legacy_irqs; irq++)
per_cpu(vector_irq, cpu)[IRQ0_VECTOR + irq] = irq;
#endif
__setup_vector_irq(cpu);
}
static void __init smp_intr_init(void)
{
#ifdef CONFIG_SMP
......
......@@ -526,21 +526,37 @@ static int __cpuinit mwait_usable(const struct cpuinfo_x86 *c)
}
/*
* Check for AMD CPUs, which have potentially C1E support
* Check for AMD CPUs, where APIC timer interrupt does not wake up CPU from C1e.
* For more information see
* - Erratum #400 for NPT family 0xf and family 0x10 CPUs
* - Erratum #365 for family 0x11 (not affected because C1e not in use)
*/
static int __cpuinit check_c1e_idle(const struct cpuinfo_x86 *c)
{
u64 val;
if (c->x86_vendor != X86_VENDOR_AMD)
return 0;
if (c->x86 < 0x0F)
return 0;
goto no_c1e_idle;
/* Family 0x0f models < rev F do not have C1E */
if (c->x86 == 0x0f && c->x86_model < 0x40)
return 0;
if (c->x86 == 0x0F && c->x86_model >= 0x40)
return 1;
return 1;
if (c->x86 == 0x10) {
/*
* check OSVW bit for CPUs that are not affected
* by erratum #400
*/
rdmsrl(MSR_AMD64_OSVW_ID_LENGTH, val);
if (val >= 2) {
rdmsrl(MSR_AMD64_OSVW_STATUS, val);
if (!(val & BIT(1)))
goto no_c1e_idle;
}
return 1;
}
no_c1e_idle:
return 0;
}
static cpumask_var_t c1e_mask;
......
......@@ -247,7 +247,7 @@ static void __cpuinit smp_callin(void)
/*
* Need to setup vector mappings before we enable interrupts.
*/
__setup_vector_irq(smp_processor_id());
setup_vector_irq(smp_processor_id());
/*
* Get our bogomips.
*
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册