Staging: rar: Fix all coding style issues.

This fixes all coding style issues and some spelling mistakes.
Signed-off-by: NBenjamin Adolphi <b.adolphi@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

drivers/staging/rar/rar_driver.c

@@ -68,7 +68,8 @@ static void __exit rar_exit_handler(void);
 /*
   function that is activated on the successfull probe of the RAR device
 */
-static int __devinit rar_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
+static int __devinit rar_probe(struct pci_dev *pdev,
+			       const struct pci_device_id *ent);
 
 static struct pci_device_id rar_pci_id_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x4110) },
@@ -86,9 +87,9 @@ static struct pci_driver rar_pci_driver = {
 
 /* This function is used to retrieved RAR info using the IPC message
    bus interface */
-static int memrar_get_rar_addr(struct pci_dev* pdev,
-	                      int offset,
-	                      u32 *addr)
+static int memrar_get_rar_addr(struct pci_dev *pdev,
+			       int offset,
+			       u32 *addr)
 {
 	/*
 	 * ======== The Lincroft Message Bus Interface ========
@@ -140,29 +141,29 @@ static int memrar_get_rar_addr(struct pci_dev* pdev,
 	       | (offset << 8)
 	       | (LNC_MESSAGE_BYTE_WRITE_ENABLES << 4);
 
-	printk(KERN_WARNING "rar- offset to LNC MSG is %x\n",offset);
+	printk(KERN_WARNING "rar- offset to LNC MSG is %x\n", offset);
 
 	if (addr == 0)
 		return -EINVAL;
 
 	/* Send the control message */
 	result = pci_write_config_dword(pdev,
-	                          LNC_MCR_OFFSET,
-	                          message);
+					LNC_MCR_OFFSET,
+					message);
 
-	printk(KERN_WARNING "rar- result from send ctl register is %x\n"
-	  ,result);
+	printk(KERN_WARNING "rar- result from send ctl register is %x\n",
+	       result);
 
 	if (!result)
 		result = pci_read_config_dword(pdev,
-		                              LNC_MDR_OFFSET,
-				              addr);
+					       LNC_MDR_OFFSET,
+					       addr);
 
 	printk(KERN_WARNING "rar- result from read data register is %x\n",
-	  result);
+	       result);
 
 	printk(KERN_WARNING "rar- value read from data register is %x\n",
-	  *addr);
+	       *addr);
 
 	if (result)
 		return -1;
@@ -170,9 +171,9 @@ static int memrar_get_rar_addr(struct pci_dev* pdev,
 		return 0;
 }
 
-static int memrar_set_rar_addr(struct pci_dev* pdev,
-	                      int offset,
-	                      u32 addr)
+static int memrar_set_rar_addr(struct pci_dev *pdev,
+			       int offset,
+			       u32 addr)
 {
 	/*
 	 * ======== The Lincroft Message Bus Interface ========
@@ -225,29 +226,29 @@ static int memrar_set_rar_addr(struct pci_dev* pdev,
 	       | (offset << 8)
 	       | (LNC_MESSAGE_BYTE_WRITE_ENABLES << 4);
 
-	printk(KERN_WARNING "rar- offset to LNC MSG is %x\n",offset);
+	printk(KERN_WARNING "rar- offset to LNC MSG is %x\n", offset);
 
 	if (addr == 0)
 		return -EINVAL;
 
 	/* Send the control message */
 	result = pci_write_config_dword(pdev,
-	                          LNC_MDR_OFFSET,
-	                          addr);
+					LNC_MDR_OFFSET,
+					addr);
 
-	printk(KERN_WARNING "rar- result from send ctl register is %x\n"
-	  ,result);
+	printk(KERN_WARNING "rar- result from send ctl register is %x\n",
+	       result);
 
 	if (!result)
 		result = pci_write_config_dword(pdev,
-		                              LNC_MCR_OFFSET,
-				              message);
+						LNC_MCR_OFFSET,
+						message);
 
 	printk(KERN_WARNING "rar- result from write data register is %x\n",
-	  result);
+	       result);
 
 	printk(KERN_WARNING "rar- value read to data register is %x\n",
-	  addr);
+	       addr);
 
 	if (result)
 		return -1;
@@ -284,35 +285,36 @@ static int memrar_init_rar_params(struct pci_dev *pdev)
 	/* struct pci_dev *pdev = pci_get_bus_and_slot(0, PCI_DEVFN(0,0)); */
 
 	if (pdev == NULL)
-	       return -ENODEV;
+		return -ENODEV;
 
 	for (i = offsets; i != end; ++i, ++n) {
-	       if (memrar_get_rar_addr (pdev,
-		                       (*i).low,
-		                       &(rar_addr[n].low)) != 0
-		   || memrar_get_rar_addr (pdev,
-		                          (*i).high,
-		                          &(rar_addr[n].high)) != 0) {
-		       result = -1;
-		       break;
-	       }
+		if (memrar_get_rar_addr(pdev,
+					(*i).low,
+					&(rar_addr[n].low)) != 0
+		    || memrar_get_rar_addr(pdev,
+					   (*i).high,
+					   &(rar_addr[n].high)) != 0) {
+			result = -1;
+			break;
+		}
 	}
 
 	/* Done accessing the device. */
 	/* pci_dev_put(pdev); */
 
 	if (result == 0) {
-	if(1) {
-	       size_t z;
-	       for (z = 0; z != MRST_NUM_RAR; ++z) {
-			printk(KERN_WARNING "rar - BRAR[%Zd] physical address low\n"
-			     "\tlow:  0x%08x\n"
-			     "\thigh: 0x%08x\n",
-			     z,
-			     rar_addr[z].low,
-			     rar_addr[z].high);
+		if (1) {
+			size_t z;
+			for (z = 0; z != MRST_NUM_RAR; ++z) {
+				printk(KERN_WARNING
+				       "rar - BRAR[%Zd] physical address low\n"
+				       "\tlow:  0x%08x\n"
+				       "\thigh: 0x%08x\n",
+				       z,
+				       rar_addr[z].low,
+				       rar_addr[z].high);
 			}
-	       }
+		}
 	}
 
 	return result;
@@ -321,7 +323,8 @@ static int memrar_init_rar_params(struct pci_dev *pdev)
 /*
   function that is activated on the successfull probe of the RAR device
 */
-static int __devinit rar_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+static int __devinit rar_probe(struct pci_dev *pdev,
+			       const struct pci_device_id *ent)
 {
 	/* error */
 	int error;
@@ -347,7 +350,7 @@ static int __devinit rar_probe(struct pci_dev *pdev, const struct pci_device_id
 
 	/* Initialize the RAR parameters, which have to be retrieved */
 	/* via the message bus service */
-	error=memrar_init_rar_params(rar_dev);
+	error = memrar_init_rar_params(rar_dev);
 
 	if (error) {
 		DEBUG_PRINT_0(RAR_DEBUG_LEVEL_EXTENDED,
@@ -362,8 +365,8 @@ static int __devinit rar_probe(struct pci_dev *pdev, const struct pci_device_id
 }
 
 /*
-  this function registers th driver to
-  the device subsystem( either PCI, USB, etc)
+  this function registers the driver to
+  the device subsystem (either PCI, USB, etc)
 */
 static int __init rar_init_handler(void)
 {
@@ -396,25 +399,20 @@ MODULE_LICENSE("GPL");
  * The function returns a 0 upon success or a -1 if there is no RAR
  * facility on this system.
  */
-int get_rar_address(int rar_index,struct RAR_address_struct *addresses)
+int get_rar_address(int rar_index, struct RAR_address_struct *addresses)
 {
 	if (registered && (rar_index < 3) && (rar_index >= 0)) {
-		*addresses=rar_addr[rar_index];
+		*addresses = rar_addr[rar_index];
 		/* strip off lock bit information  */
 		addresses->low = addresses->low & 0xfffffff0;
 		addresses->high = addresses->high & 0xfffffff0;
 		return 0;
-		}
-
-	else {
+	} else
 		return -ENODEV;
-		}
 }
-
-
 EXPORT_SYMBOL(get_rar_address);
 
-/* The lock_rar function is ued by other device drivers to lock an RAR.
+/* The lock_rar function is used by other device drivers to lock an RAR.
  * once an RAR is locked, it stays locked until the next system reboot.
  * The function takes one parameter:
  *
@@ -429,16 +427,14 @@ int lock_rar(int rar_index)
 {
 	u32 working_addr;
 	int result;
-if (registered && (rar_index < 3) && (rar_index >= 0)) {
-	/* first make sure that lock bits are clear (this does lock) */
-	working_addr=rar_addr[rar_index].low & 0xfffffff0;
 
-	/* now send that value to the register using the IPC */
-        result=memrar_set_rar_addr(rar_dev,rar_index,working_addr);
-	return result;
-	}
+	if (registered && (rar_index < 3) && (rar_index >= 0)) {
+		/* first make sure that lock bits are clear (this does lock) */
+		working_addr = rar_addr[rar_index].low & 0xfffffff0;
 
-else {
-	return -ENODEV;
-	}
+		/* now send that value to the register using the IPC */
+		result = memrar_set_rar_addr(rar_dev, rar_index, working_addr);
+		return result;
+	} else
+		return -ENODEV;
 }

drivers/staging/rar/rar_driver.h

 /* === RAR Physical Addresses === */
 struct RAR_address_struct {
-        u32 low;
-        u32 high;
+	u32 low;
+	u32 high;
 };
 
 /* The get_rar_address function is used by other device drivers
@@ -19,10 +19,10 @@ struct RAR_address_struct {
  * The function returns a 0 upon success or a -1 if there is no RAR
  * facility on this system.
  */
-int get_rar_address(int rar_index,struct RAR_address_struct *addresses);
+int get_rar_address(int rar_index, struct RAR_address_struct *addresses);
 
 
-/* The lock_rar function is ued by other device drivers to lock an RAR.
+/* The lock_rar function is used by other device drivers to lock an RAR.
  * once an RAR is locked, it stays locked until the next system reboot.
  * The function takes one parameter:
  *
@@ -49,51 +49,41 @@ int lock_rar(int rar_index);
 
 /* debug macro without paramaters */
 #define DEBUG_PRINT_0(DEBUG_LEVEL , info) \
-do \
-{ \
-  if(DEBUG_LEVEL) \
-  { \
-    printk(KERN_WARNING info); \
-  } \
-}while(0)
+do { \
+	if (DEBUG_LEVEL) { \
+		printk(KERN_WARNING info); \
+	} \
+} while (0)
 
 /* debug macro with 1 paramater */
 #define DEBUG_PRINT_1(DEBUG_LEVEL , info , param1) \
-do \
-{ \
-  if(DEBUG_LEVEL) \
-  { \
-    printk(KERN_WARNING info , param1); \
-  } \
-}while(0)
+do { \
+	if (DEBUG_LEVEL) { \
+		printk(KERN_WARNING info , param1); \
+	} \
+} while (0)
 
 /* debug macro with 2 paramaters */
 #define DEBUG_PRINT_2(DEBUG_LEVEL , info , param1, param2) \
-do \
-{ \
-  if(DEBUG_LEVEL) \
-  { \
-    printk(KERN_WARNING info , param1, param2); \
-  } \
-}while(0)
+do { \
+	if (DEBUG_LEVEL) { \
+		printk(KERN_WARNING info , param1, param2); \
+	} \
+} while (0)
 
 /* debug macro with 3 paramaters */
 #define DEBUG_PRINT_3(DEBUG_LEVEL , info , param1, param2 , param3) \
-do \
-{ \
-  if(DEBUG_LEVEL) \
-  { \
-    printk(KERN_WARNING info , param1, param2 , param3); \
-  } \
-}while(0)
+do { \
+	if (DEBUG_LEVEL) { \
+		printk(KERN_WARNING info , param1, param2 , param3); \
+	} \
+} while (0)
 
 /* debug macro with 4 paramaters */
 #define DEBUG_PRINT_4(DEBUG_LEVEL , info , param1, param2 , param3 , param4) \
-do \
-{ \
-  if(DEBUG_LEVEL) \
-  { \
-    printk(KERN_WARNING info , param1, param2 , param3 , param4); \
-  } \
-}while(0)
+do { \
+	if (DEBUG_LEVEL) { \
+		printk(KERN_WARNING info , param1, param2 , param3 , param4); \
+	} \
+} while (0)