提交 f353e612 编写于 作者: I Ingo Molnar

Merge branch 'tip-x86-fpu' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp into x86/fpu

Pull FPU updates from Borislav Petkov:

 "A round of updates to the FPU maze from Oleg and Rik. It should make
  the code a bit more understandable/readable/streamlined and a preparation
  for more cleanups and improvements in that area."
Signed-off-by: NIngo Molnar <mingo@kernel.org>
......@@ -67,6 +67,34 @@ extern void finit_soft_fpu(struct i387_soft_struct *soft);
static inline void finit_soft_fpu(struct i387_soft_struct *soft) {}
#endif
/*
* Must be run with preemption disabled: this clears the fpu_owner_task,
* on this CPU.
*
* This will disable any lazy FPU state restore of the current FPU state,
* but if the current thread owns the FPU, it will still be saved by.
*/
static inline void __cpu_disable_lazy_restore(unsigned int cpu)
{
per_cpu(fpu_owner_task, cpu) = NULL;
}
/*
* Used to indicate that the FPU state in memory is newer than the FPU
* state in registers, and the FPU state should be reloaded next time the
* task is run. Only safe on the current task, or non-running tasks.
*/
static inline void task_disable_lazy_fpu_restore(struct task_struct *tsk)
{
tsk->thread.fpu.last_cpu = ~0;
}
static inline int fpu_lazy_restore(struct task_struct *new, unsigned int cpu)
{
return new == this_cpu_read_stable(fpu_owner_task) &&
cpu == new->thread.fpu.last_cpu;
}
static inline int is_ia32_compat_frame(void)
{
return config_enabled(CONFIG_IA32_EMULATION) &&
......@@ -400,24 +428,6 @@ static inline void drop_init_fpu(struct task_struct *tsk)
*/
typedef struct { int preload; } fpu_switch_t;
/*
* Must be run with preemption disabled: this clears the fpu_owner_task,
* on this CPU.
*
* This will disable any lazy FPU state restore of the current FPU state,
* but if the current thread owns the FPU, it will still be saved by.
*/
static inline void __cpu_disable_lazy_restore(unsigned int cpu)
{
per_cpu(fpu_owner_task, cpu) = NULL;
}
static inline int fpu_lazy_restore(struct task_struct *new, unsigned int cpu)
{
return new == this_cpu_read_stable(fpu_owner_task) &&
cpu == new->thread.fpu.last_cpu;
}
static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct task_struct *new, int cpu)
{
fpu_switch_t fpu;
......@@ -426,13 +436,17 @@ static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct ta
* If the task has used the math, pre-load the FPU on xsave processors
* or if the past 5 consecutive context-switches used math.
*/
fpu.preload = tsk_used_math(new) && (use_eager_fpu() ||
new->thread.fpu_counter > 5);
fpu.preload = tsk_used_math(new) &&
(use_eager_fpu() || new->thread.fpu_counter > 5);
if (__thread_has_fpu(old)) {
if (!__save_init_fpu(old))
cpu = ~0;
old->thread.fpu.last_cpu = cpu;
old->thread.fpu.has_fpu = 0; /* But leave fpu_owner_task! */
task_disable_lazy_fpu_restore(old);
else
old->thread.fpu.last_cpu = cpu;
/* But leave fpu_owner_task! */
old->thread.fpu.has_fpu = 0;
/* Don't change CR0.TS if we just switch! */
if (fpu.preload) {
......@@ -443,10 +457,10 @@ static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct ta
stts();
} else {
old->thread.fpu_counter = 0;
old->thread.fpu.last_cpu = ~0;
task_disable_lazy_fpu_restore(old);
if (fpu.preload) {
new->thread.fpu_counter++;
if (!use_eager_fpu() && fpu_lazy_restore(new, cpu))
if (fpu_lazy_restore(new, cpu))
fpu.preload = 0;
else
prefetch(new->thread.fpu.state);
......@@ -519,24 +533,6 @@ static inline void __save_fpu(struct task_struct *tsk)
fpu_fxsave(&tsk->thread.fpu);
}
/*
* These disable preemption on their own and are safe
*/
static inline void save_init_fpu(struct task_struct *tsk)
{
WARN_ON_ONCE(!__thread_has_fpu(tsk));
if (use_eager_fpu()) {
__save_fpu(tsk);
return;
}
preempt_disable();
__save_init_fpu(tsk);
__thread_fpu_end(tsk);
preempt_enable();
}
/*
* i387 state interaction
*/
......
......@@ -119,10 +119,13 @@ void unlazy_fpu(struct task_struct *tsk)
{
preempt_disable();
if (__thread_has_fpu(tsk)) {
__save_init_fpu(tsk);
__thread_fpu_end(tsk);
} else
tsk->thread.fpu_counter = 0;
if (use_eager_fpu()) {
__save_fpu(tsk);
} else {
__save_init_fpu(tsk);
__thread_fpu_end(tsk);
}
}
preempt_enable();
}
EXPORT_SYMBOL(unlazy_fpu);
......@@ -246,7 +249,7 @@ int init_fpu(struct task_struct *tsk)
if (tsk_used_math(tsk)) {
if (cpu_has_fpu && tsk == current)
unlazy_fpu(tsk);
tsk->thread.fpu.last_cpu = ~0;
task_disable_lazy_fpu_restore(tsk);
return 0;
}
......
......@@ -68,8 +68,8 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
dst->thread.fpu_counter = 0;
dst->thread.fpu.has_fpu = 0;
dst->thread.fpu.last_cpu = ~0;
dst->thread.fpu.state = NULL;
task_disable_lazy_fpu_restore(dst);
if (tsk_used_math(src)) {
int err = fpu_alloc(&dst->thread.fpu);
if (err)
......
......@@ -734,7 +734,7 @@ static void math_error(struct pt_regs *regs, int error_code, int trapnr)
/*
* Save the info for the exception handler and clear the error.
*/
save_init_fpu(task);
unlazy_fpu(task);
task->thread.trap_nr = trapnr;
task->thread.error_code = error_code;
info.si_signo = SIGFPE;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册