提交 f340c2ff 编写于 作者: D Deepak M 提交者: Jani Nikula

drm/i915/glk: Add DSI PLL divider range for glk

PLL divider range for GLK is different than that of
BXT, hence adding the GLK range check in this patch.

v2: Code restructure using min and max ratio variables (Ander)
v3: Code changes to avoid "maybe-uninitialized" warning (Jani)
Signed-off-by: NDeepak M <m.deepak@intel.com>
Signed-off-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487335415-14766-5-git-send-email-madhav.chauhan@intel.com
上级 b426f985
......@@ -8337,10 +8337,12 @@ enum {
#define BXT_DSI_PLL_PVD_RATIO_SHIFT 16
#define BXT_DSI_PLL_PVD_RATIO_MASK (3 << BXT_DSI_PLL_PVD_RATIO_SHIFT)
#define BXT_DSI_PLL_PVD_RATIO_1 (1 << BXT_DSI_PLL_PVD_RATIO_SHIFT)
#define BXT_DSIC_16X_BY1 (0 << 10)
#define BXT_DSIC_16X_BY2 (1 << 10)
#define BXT_DSIC_16X_BY3 (2 << 10)
#define BXT_DSIC_16X_BY4 (3 << 10)
#define BXT_DSIC_16X_MASK (3 << 10)
#define BXT_DSIA_16X_BY1 (0 << 8)
#define BXT_DSIA_16X_BY2 (1 << 8)
#define BXT_DSIA_16X_BY3 (2 << 8)
#define BXT_DSIA_16X_BY4 (3 << 8)
......@@ -8350,6 +8352,8 @@ enum {
#define BXT_DSI_PLL_RATIO_MAX 0x7D
#define BXT_DSI_PLL_RATIO_MIN 0x22
#define GLK_DSI_PLL_RATIO_MAX 0x6F
#define GLK_DSI_PLL_RATIO_MIN 0x22
#define BXT_DSI_PLL_RATIO_MASK 0xFF
#define BXT_REF_CLOCK_KHZ 19200
......
......@@ -426,11 +426,12 @@ static void bxt_dsi_program_clocks(struct drm_device *dev, enum port port,
I915_WRITE(BXT_MIPI_CLOCK_CTL, tmp);
}
static int bxt_compute_dsi_pll(struct intel_encoder *encoder,
static int gen9lp_compute_dsi_pll(struct intel_encoder *encoder,
struct intel_crtc_state *config)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
u8 dsi_ratio;
u8 dsi_ratio, dsi_ratio_min, dsi_ratio_max;
u32 dsi_clk;
dsi_clk = dsi_clk_from_pclk(intel_dsi->pclk, intel_dsi->pixel_format,
......@@ -442,11 +443,20 @@ static int bxt_compute_dsi_pll(struct intel_encoder *encoder,
* round 'up' the result
*/
dsi_ratio = DIV_ROUND_UP(dsi_clk * 2, BXT_REF_CLOCK_KHZ);
if (dsi_ratio < BXT_DSI_PLL_RATIO_MIN ||
dsi_ratio > BXT_DSI_PLL_RATIO_MAX) {
if (IS_BROXTON(dev_priv)) {
dsi_ratio_min = BXT_DSI_PLL_RATIO_MIN;
dsi_ratio_max = BXT_DSI_PLL_RATIO_MAX;
} else {
dsi_ratio_min = GLK_DSI_PLL_RATIO_MIN;
dsi_ratio_max = GLK_DSI_PLL_RATIO_MAX;
}
if (dsi_ratio < dsi_ratio_min || dsi_ratio > dsi_ratio_max) {
DRM_ERROR("Cant get a suitable ratio from DSI PLL ratios\n");
return -ECHRNG;
}
} else
DRM_DEBUG_KMS("DSI PLL calculation is Done!!\n");
/*
* Program DSI ratio and Select MIPIC and MIPIA PLL output as 8x
......@@ -458,7 +468,7 @@ static int bxt_compute_dsi_pll(struct intel_encoder *encoder,
/* As per recommendation from hardware team,
* Prog PVD ratio =1 if dsi ratio <= 50
*/
if (dsi_ratio <= 50)
if (IS_BROXTON(dev_priv) && dsi_ratio <= 50)
config->dsi_pll.ctrl |= BXT_DSI_PLL_PVD_RATIO_1;
return 0;
......@@ -518,7 +528,7 @@ int intel_compute_dsi_pll(struct intel_encoder *encoder,
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
return vlv_compute_dsi_pll(encoder, config);
else if (IS_GEN9_LP(dev_priv))
return bxt_compute_dsi_pll(encoder, config);
return gen9lp_compute_dsi_pll(encoder, config);
return -ENODEV;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册