Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 f2046f93 编写于 作者: J Joe Perches 提交者： Greg Kroah-Hartman
浏览文件
操作

staging: vt6655: Remove commented out printks 

These are just noise in the code so remove them.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
上级 00d0603c
隐藏空白更改
内联 并排
Showing with 6 addition and 130 deletion
drivers/staging/vt6655/baseband.c
浏览文件 @ f2046f93
......@@ -1732,10 +1732,6 @@ s_vChangeAntenna(
PSDevice pDevice
)
{
#ifdef PLICE_DEBUG
//printk("Enter s_vChangeAntenna:original RxMode is %d,TxMode is %d\n",pDevice->byRxAntennaMode,pDevice->byTxAntennaMode);
#endif
if (pDevice->dwRxAntennaSel == 0) {
pDevice->dwRxAntennaSel = 1;
if (pDevice->bTxRxAntInv == true)
......@@ -2564,9 +2560,6 @@ BBvSetTxAntennaMode(unsigned long dwIoBase, unsigned char byAntennaMode)
{
unsigned char byBBTxConf;
#ifdef PLICE_DEBUG
//printk("Enter BBvSetTxAntennaMode\n");
#endif
BBbReadEmbedded(dwIoBase, 0x09, &byBBTxConf);//CR09
if (byAntennaMode == ANT_DIVERSITY) {
// bit 1 is diversity
......@@ -2575,9 +2568,6 @@ BBvSetTxAntennaMode(unsigned long dwIoBase, unsigned char byAntennaMode)
// bit 2 is ANTSEL
byBBTxConf &= 0xF9; // 1111 1001
} else if (byAntennaMode == ANT_B) {
#ifdef PLICE_DEBUG
//printk("BBvSetTxAntennaMode:ANT_B\n");
#endif
byBBTxConf &= 0xFD; // 1111 1101
byBBTxConf |= 0x04;
}
......@@ -2812,9 +2802,7 @@ BBvAntennaDiversity(PSDevice pDevice, unsigned char byRxRate, unsigned char bySQ
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "1.[%08x], uNumSQ3[%d]=%d, %d\n",
(int)pDevice->ulRatio_State0, (int)pDevice->wAntDiversityMaxRate,
(int)pDevice->uNumSQ3[(int)pDevice->wAntDiversityMaxRate], (int)pDevice->uDiversityCnt);
#ifdef PLICE_DEBUG
//printk("BBvAntennaDiversity1:call s_vChangeAntenna\n");
#endif
s_vChangeAntenna(pDevice);
pDevice->byAntennaState = 1;
del_timer(&pDevice->TimerSQ3Tmax3);
......@@ -2845,9 +2833,7 @@ BBvAntennaDiversity(PSDevice pDevice, unsigned char byRxRate, unsigned char bySQ
(int)pDevice->ulRatio_State0, (int)pDevice->ulRatio_State1,
(int)pDevice->wAntDiversityMaxRate,
(int)pDevice->uNumSQ3[(int)pDevice->wAntDiversityMaxRate], (int)pDevice->uDiversityCnt);
#ifdef PLICE_DEBUG
//printk("BBvAntennaDiversity2:call s_vChangeAntenna\n");
#endif
s_vChangeAntenna(pDevice);
pDevice->TimerSQ3Tmax3.expires = RUN_AT(pDevice->byTMax3 * HZ);
pDevice->TimerSQ3Tmax2.expires = RUN_AT(pDevice->byTMax2 * HZ);
......@@ -2885,9 +2871,6 @@ TimerSQ3CallBack(
spin_lock_irq(&pDevice->lock);
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "3.[%08x][%08x], %d\n", (int)pDevice->ulRatio_State0, (int)pDevice->ulRatio_State1, (int)pDevice->uDiversityCnt);
#ifdef PLICE_DEBUG
//printk("TimerSQ3CallBack1:call s_vChangeAntenna\n");
#endif
s_vChangeAntenna(pDevice);
pDevice->byAntennaState = 0;
......@@ -2933,9 +2916,6 @@ TimerState1CallBack(
spin_lock_irq(&pDevice->lock);
if (pDevice->uDiversityCnt < pDevice->ulDiversityMValue/100) {
#ifdef PLICE_DEBUG
//printk("TimerSQ3CallBack2:call s_vChangeAntenna\n");
#endif
s_vChangeAntenna(pDevice);
pDevice->TimerSQ3Tmax3.expires = RUN_AT(pDevice->byTMax3 * HZ);
......@@ -2952,9 +2932,6 @@ TimerState1CallBack(
(int)pDevice->ulRatio_State0, (int)pDevice->ulRatio_State1,
(int)pDevice->wAntDiversityMaxRate,
(int)pDevice->uNumSQ3[(int)pDevice->wAntDiversityMaxRate], (int)pDevice->uDiversityCnt);
#ifdef PLICE_DEBUG
//printk("TimerSQ3CallBack3:call s_vChangeAntenna\n");
#endif
s_vChangeAntenna(pDevice);
......
drivers/staging/vt6655/bssdb.c
浏览文件 @ f2046f93
......@@ -1413,12 +1413,7 @@ BSSvUpdateNodeTxCounter(
byFallBack = AUTO_FB_NONE;
}
wRate = pTxBufHead->wReserved; //?wRate
//printk("BSSvUpdateNodeTxCounter:byTxRetry is %d\n",byTxRetry);
//printk("BSSvUpdateNodeTx:wRate is %d,byFallback is %d\n",wRate,byFallBack);
//#ifdef PLICE_DEBUG
//printk("BSSvUpdateNodeTx: wRate is %d\n",wRate);
////#endif
// Only Unicast using support rates
if (pTxBufHead->wFIFOCtl & FIFOCTL_NEEDACK) {
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "wRate %04X, byTsr0 %02X, byTsr1 %02X\n", wRate, byTsr0, byTsr1);
......@@ -1466,13 +1461,11 @@ BSSvUpdateNodeTxCounter(
//PLICE_DEBUG
wFallBackRate = awHWRetry0[wRate-RATE_18M][ii];
//printk(" II is %d:BSSvUpdateNodeTx:wFallBackRate is %d\n",ii,wFallBackRate);
//wFallBackRate = awHWRetry0[wRate-RATE_12M][ii];
}
else
{
wFallBackRate = awHWRetry0[wRate-RATE_18M][4];
//printk("ii is %d BSSvUpdateNodeTx:wFallBackRate is %d\n",ii,wFallBackRate);
//wFallBackRate = awHWRetry0[wRate-RATE_12M][4];
}
pMgmt->sNodeDBTable[0].uTxFail[wFallBackRate]++;
......@@ -1686,7 +1679,6 @@ void s_uCalculateLinkQual(
//decide link quality
if (pDevice->bLinkPass != true)
{
// printk("s_uCalculateLinkQual-->Link disconnect and Poor quality**\n");
pDevice->scStatistic.LinkQuality = 0;
pDevice->scStatistic.SignalStren = 0;
}
......
drivers/staging/vt6655/channel.c
浏览文件 @ f2046f93
......@@ -433,7 +433,6 @@ void init_channel_table(void *pDeviceHandler)
case RF_AL2230S:
case RF_UW2451:
case RF_VT3226:
//printk("chester-false\n");
bMultiBand = false;
break;
case RF_AIROHA7230:
......@@ -581,14 +580,8 @@ bool set_channel(void *pDeviceHandler, unsigned int uConnectionChannel)
}
if (pDevice->eCurrentPHYType == PHY_TYPE_11B) {
#ifdef PLICE_DEBUG
//printk("Func:ChbSetChannel:call RFbSetPower:11B\n");
#endif
RFbSetPower(pDevice, RATE_1M, pDevice->byCurrentCh);
} else {
#ifdef PLICE_DEBUG
//printk("Func:ChbSetChannel:call RFbSetPower\n");
#endif
RFbSetPower(pDevice, RATE_6M, pDevice->byCurrentCh);
}
......
drivers/staging/vt6655/device.h
浏览文件 @ f2046f93
......@@ -815,10 +815,8 @@ typedef struct __device_info {
inline static void EnQueue(PSDevice pDevice, PSRxMgmtPacket pRxMgmtPacket)
{
//printk("Enter EnQueue:tail is %d\n",pDevice->rxManeQueue.tail);
if ((pDevice->rxManeQueue.tail+1) % NUM == pDevice->rxManeQueue.head)
{
//printk("Queue is Full,tail is %d\n",pDevice->rxManeQueue.tail);
return;
}
else
......@@ -826,7 +824,6 @@ inline static void EnQueue(PSDevice pDevice, PSRxMgmtPacket pRxMgmtPacket)
pDevice->rxManeQueue.tail = (pDevice->rxManeQueue.tail + 1) % NUM;
pDevice->rxManeQueue.Q[pDevice->rxManeQueue.tail] = pRxMgmtPacket;
pDevice->rxManeQueue.packet_num++;
//printk("packet num is %d\n",pDevice->rxManeQueue.packet_num);
}
}
......@@ -847,7 +844,6 @@ inline static PSRxMgmtPacket DeQueue(PSDevice pDevice)
//x=pDevice->rxManeQueue.head = (pDevice->rxManeQueue.head+1)%NUM;
pDevice->rxManeQueue.head = (pDevice->rxManeQueue.head+1)%NUM;
x = pDevice->rxManeQueue.head;
//printk("Enter DeQueue:head is %d\n",x);
pRxMgmtPacket = pDevice->rxManeQueue.Q[x];
pDevice->rxManeQueue.packet_num--;
return pRxMgmtPacket;
......
drivers/staging/vt6655/device_main.c
浏览文件 @ f2046f93
......@@ -570,16 +570,11 @@ static void device_init_registers(PSDevice pDevice, DEVICE_INIT_TYPE InitType)
pDevice->bTxRxAntInv = true;
else
pDevice->bTxRxAntInv = false;
#ifdef PLICE_DEBUG
//printk("init_register:TxRxAntInv is %d,byValue is %d\n",pDevice->bTxRxAntInv,byValue);
#endif
byValue &= (EEP_ANTENNA_AUX | EEP_ANTENNA_MAIN);
if (byValue == 0) // if not set default is All
byValue = (EEP_ANTENNA_AUX | EEP_ANTENNA_MAIN);
#ifdef PLICE_DEBUG
//printk("init_register:byValue is %d\n",byValue);
#endif
pDevice->ulDiversityNValue = 100*260;//100*SROMbyReadEmbedded(pDevice->PortOffset, 0x51);
pDevice->ulDiversityMValue = 100*16;//SROMbyReadEmbedded(pDevice->PortOffset, 0x52);
pDevice->byTMax = 1;//SROMbyReadEmbedded(pDevice->PortOffset, 0x53);
......@@ -603,9 +598,6 @@ static void device_init_registers(PSDevice pDevice, DEVICE_INIT_TYPE InitType)
pDevice->bDiversityEnable = false;//SROMbyReadEmbedded(pDevice->PortOffset, 0x50);
else
pDevice->bDiversityEnable = true;
#ifdef PLICE_DEBUG
//printk("aux |main antenna: RxAntennaMode is %d\n",pDevice->byRxAntennaMode);
#endif
} else {
pDevice->bDiversityEnable = false;
pDevice->byAntennaCount = 1;
......@@ -625,9 +617,6 @@ static void device_init_registers(PSDevice pDevice, DEVICE_INIT_TYPE InitType)
pDevice->byRxAntennaMode = ANT_B;
}
}
#ifdef PLICE_DEBUG
//printk("init registers: TxAntennaMode is %d\n",pDevice->byTxAntennaMode);
#endif
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "bDiversityEnable=[%d],NValue=[%d],MValue=[%d],TMax=[%d],TMax2=[%d]\n",
pDevice->bDiversityEnable, (int)pDevice->ulDiversityNValue, (int)pDevice->ulDiversityMValue, pDevice->byTMax, pDevice->byTMax2);
......@@ -692,7 +681,7 @@ static void device_init_registers(PSDevice pDevice, DEVICE_INIT_TYPE InitType)
//byCCKPwrdBm = SROMbyReadEmbedded(pDevice->PortOffset, EEP_OFS_CCK_PWR_dBm);
//byOFDMPwrdBm = SROMbyReadEmbedded(pDevice->PortOffset, EEP_OFS_OFDM_PWR_dBm);
//printk("CCKPwrdBm is 0x%x,byOFDMPwrdBm is 0x%x\n",byCCKPwrdBm,byOFDMPwrdBm);
// Load power Table
......@@ -756,9 +745,6 @@ static void device_init_registers(PSDevice pDevice, DEVICE_INIT_TYPE InitType)
pDevice->byBBVGANew = pDevice->byBBVGACurrent;
BBvSetVGAGainOffset(pDevice, pDevice->abyBBVGA[0]);
}
#ifdef PLICE_DEBUG
//printk("init registers:RxAntennaMode is %x,TxAntennaMode is %x\n",pDevice->byRxAntennaMode,pDevice->byTxAntennaMode);
#endif
BBvSetRxAntennaMode(pDevice->PortOffset, pDevice->byRxAntennaMode);
BBvSetTxAntennaMode(pDevice->PortOffset, pDevice->byTxAntennaMode);
......@@ -1162,13 +1148,11 @@ static bool device_get_pci_info(PSDevice pDevice, struct pci_dev *pcid) {
#ifdef PLICE_DEBUG
//pci_read_config_word(pcid,PCI_MAX_LAT,&max_lat);
//printk("max lat is %x,SubSystemID is %x\n",max_lat,pDevice->SubSystemID);
//for (ii=0;ii<0xFF;ii++)
//pci_read_config_word(pcid,PCI_MAX_LAT,&max_lat);
//max_lat = 0x20;
//pci_write_config_word(pcid,PCI_MAX_LAT,max_lat);
//pci_read_config_word(pcid,PCI_MAX_LAT,&max_lat);
//printk("max lat is %x\n",max_lat);
for (ii = 0; ii < 0xFF; ii++)
{
......@@ -1604,9 +1588,6 @@ static bool device_alloc_rx_buf(PSDevice pDevice, PSRxDesc pRD) {
pRDInfo->skb = dev_alloc_skb((int)pDevice->rx_buf_sz);
#ifdef PLICE_DEBUG
//printk("device_alloc_rx_buf:skb is %x\n",pRDInfo->skb);
#endif
if (pRDInfo->skb == NULL)
return false;
ASSERT(pRDInfo->skb);
......@@ -1828,15 +1809,12 @@ int MlmeThread(
PSRxMgmtPacket pRxMgmtPacket;
// int i;
//complete(&pDevice->notify);
//printk("Enter MngWorkItem,Queue packet num is %d\n",pDevice->rxManeQueue.packet_num);
//printk("Enter MlmeThread,packet _num is %d\n",pDevice->rxManeQueue.packet_num);
//i = 0;
#if 1
while (1)
{
//printk("DDDD\n");
//down(&pDevice->mlme_semaphore);
// pRxMgmtPacket = DeQueue(pDevice);
#if 1
......@@ -1847,20 +1825,15 @@ int MlmeThread(
//pDevice;
//DequeueManageObject(pDevice->FirstRecvMngList, pDevice->LastRecvMngList);
vMgrRxManagePacket(pDevice, pDevice->pMgmt, pRxMgmtPacket);
//printk("packet_num is %d\n",pDevice->rxManeQueue.packet_num);
}
spin_unlock_irq(&pDevice->lock);
if (mlme_kill == 0)
break;
//udelay(200);
#endif
//printk("Before schedule thread jiffies is %x\n",jiffies);
schedule();
//printk("after schedule thread jiffies is %x\n",jiffies);
if (mlme_kill == 0)
break;
//printk("i is %d\n",i);
}
#endif
......@@ -1885,7 +1858,7 @@ static int device_open(struct net_device *dev) {
i = request_irq(pDevice->pcid->irq, &device_intr, IRQF_SHARED, dev->name, dev);
if (i)
return i;
//printk("DEBUG1\n");
#ifdef WPA_SM_Transtatus
memset(wpa_Result.ifname, 0, sizeof(wpa_Result.ifname));
wpa_Result.proto = 0;
......@@ -1927,8 +1900,6 @@ static int device_open(struct net_device *dev) {
//printk("thread id is %d\n",pDevice->MLMEThr_pid);
//printk("Create thread time is %x\n",jiffies);
//wait_for_completion(&pDevice->notify);
......@@ -1972,9 +1943,6 @@ static int device_open(struct net_device *dev) {
pDevice->eEncryptionStatus = Ndis802_11Encryption1Enabled;
}
//printk("DEBUG2\n");
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "call MACvIntEnable\n");
MACvIntEnable(pDevice->PortOffset, IMR_MASK_VALUE);
......@@ -2579,7 +2547,6 @@ static int device_xmit(struct sk_buff *skb, struct net_device *dev) {
}
else
{
//printk("Auto Rate:Rate is %d,TxPower is %d\n",pDevice->wCurrentRate,pDevice->byCurPwr);
}
//#endif
......
drivers/staging/vt6655/dpc.c
浏览文件 @ f2046f93
......@@ -297,7 +297,7 @@ void MngWorkItem(void *Context)
{
PSRxMgmtPacket pRxMgmtPacket;
PSDevice pDevice = (PSDevice) Context;
//printk("Enter MngWorkItem,Queue packet num is %d\n",pDevice->rxManeQueue.packet_num);
spin_lock_irq(&pDevice->lock);
while (pDevice->rxManeQueue.packet_num != 0)
{
......@@ -320,9 +320,6 @@ device_receive_frame(
{
PDEVICE_RD_INFO pRDInfo = pCurrRD->pRDInfo;
#ifdef PLICE_DEBUG
//printk("device_receive_frame:pCurrRD is %x,pRDInfo is %x\n",pCurrRD,pCurrRD->pRDInfo);
#endif
struct net_device_stats *pStats = &pDevice->stats;
struct sk_buff *skb;
PSMgmtObject pMgmt = pDevice->pMgmt;
......@@ -600,7 +597,6 @@ device_receive_frame(
#ifdef THREAD
EnQueue(pDevice, pRxPacket);
//printk("enque time is %x\n",jiffies);
//up(&pDevice->mlme_semaphore);
//Enque (pDevice->FirstRecvMngList,pDevice->LastRecvMngList,pMgmt);
#else
......@@ -609,7 +605,6 @@ device_receive_frame(
EnQueue(pDevice, pRxPacket);
tasklet_schedule(&pDevice->RxMngWorkItem);
#else
//printk("RxMan\n");
vMgrRxManagePacket((void *)pDevice, pDevice->pMgmt, pRxPacket);
//tasklet_schedule(&pDevice->RxMngWorkItem);
#endif
......@@ -705,7 +700,6 @@ device_receive_frame(
if (pDevice->bDiversityEnable && (FrameSize > 50) &&
(pDevice->eOPMode == OP_MODE_INFRASTRUCTURE) &&
(pDevice->bLinkPass == true)) {
//printk("device_receive_frame: RxRate is %d\n",*pbyRxRate);
BBvAntennaDiversity(pDevice, s_byGetRateIdx(*pbyRxRate), 0);
}
......@@ -967,13 +961,6 @@ device_receive_frame(
}
return false;
}
// if (pDevice->bRxMICFail == false) {
// for (ii =0; ii < 100; ii++)
// printk(" %02x", *(skb->data + ii));
// printk("\n");
// }
}
skb->data += cbHeaderOffset;
......
drivers/staging/vt6655/iwctl.c
浏览文件 @ f2046f93
......@@ -192,7 +192,6 @@ int iwctl_siwscan(struct net_device *dev,
}
pMgmt->eScanType = WMAC_SCAN_PASSIVE;
//printk("SIOCSIWSCAN:WLAN_CMD_BSSID_SCAN\n");
bScheduleCommand((void *)pDevice, WLAN_CMD_BSSID_SCAN, NULL);
spin_unlock_irq(&pDevice->lock);
......
drivers/staging/vt6655/rf.c
浏览文件 @ f2046f93
......@@ -988,8 +988,6 @@ bool RFbSetPower(
//PLICE_DEBUG->
//byPwr+=5;
//PLICE_DEBUG <-
//printk("Rate <11:byPwr is %d\n",byPwr);
break;
case RATE_6M:
case RATE_9M:
......@@ -1015,8 +1013,6 @@ bool RFbSetPower(
//PLICE_DEBUG->
//byPwr+=5;
//PLICE_DEBUG<-
//printk("Rate <24:byPwr is %d\n",byPwr);
break;
case RATE_24M:
case RATE_36M:
......@@ -1027,7 +1023,6 @@ bool RFbSetPower(
//PLICE_DEBUG->
//byPwr+=5;
//PLICE_DEBUG<-
//printk("Rate < 54:byPwr is %d\n",byPwr);
break;
}
......
drivers/staging/vt6655/rxtx.c
浏览文件 @ f2046f93
......@@ -378,9 +378,6 @@ s_uGetTxRsvTime(
unsigned int uDataTime, uAckTime;
uDataTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, cbFrameLength, wRate);
#ifdef PLICE_DEBUG
//printk("s_uGetTxRsvTime is %d\n",uDataTime);
#endif
if (byPktType == PK_TYPE_11B) {//llb,CCK mode
uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, (unsigned short)pDevice->byTopCCKBasicRate);
} else {//11g 2.4G OFDM mode & 11a 5G OFDM mode
......@@ -2178,8 +2175,6 @@ vGenerateFIFOHeader(PSDevice pDevice, unsigned char byPktType, unsigned char *pb
}
#ifdef PLICE_DEBUG
//printk("Func:vGenerateFIFOHeader:TxDataRate is %d,TxPower is %d\n",pDevice->wCurrentRate,pDevice->byCurPwr);
//if (pDevice->wCurrentRate <= 3)
//{
// RFbRawSetPower(pDevice,36,pDevice->wCurrentRate);
......@@ -2605,9 +2600,6 @@ CMD_STATUS csMgmt_xmit(PSDevice pDevice, PSTxMgmtPacket pPacket) {
}
pDevice->apCurrTD[TYPE_TXDMA0] = pFrstTD->next;
#ifdef PLICE_DEBUG
//printk("SCAN:CurrentRate is %d,TxPower is %d\n",wCurrentRate,pTxBufHead->byTxPower);
#endif
#ifdef TxInSleep
pDevice->nTxDataTimeCout = 0; //2008-8-21 chester <add> for send null packet
......
drivers/staging/vt6655/wcmd.c
浏览文件 @ f2046f93
......@@ -415,7 +415,6 @@ vCommandTimer(
spin_unlock_irq(&pDevice->lock);
return;
}
//printk("chester-pMgmt->uScanChannel=%d,pDevice->byMaxChannel=%d\n",pMgmt->uScanChannel,pDevice->byMaxChannel);
if (pMgmt->uScanChannel == pDevice->byMinChannel) {
//pMgmt->eScanType = WMAC_SCAN_ACTIVE;
pMgmt->abyScanBSSID[0] = 0xFF;
......@@ -439,8 +438,6 @@ vCommandTimer(
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "SET SCAN Channel Fail: %d\n", pMgmt->uScanChannel);
}
CARDbSetBSSID(pMgmt->pAdapter, pMgmt->abyCurrBSSID, OP_MODE_UNKNOWN);
// printk("chester-mxch=%d\n",pDevice->byMaxChannel);
// printk("chester-ch=%d\n",pMgmt->uScanChannel);
pMgmt->uScanChannel++;
//2008-8-4 <modify> by chester
if (!is_channel_valid(pMgmt->uScanChannel) &&
......@@ -546,7 +543,6 @@ vCommandTimer(
spin_unlock_irq(&pDevice->lock);
return;
}
//printk("chester-currmode=%d\n",pMgmt->eCurrMode);
printk("chester-abyDesireSSID=%s\n", ((PWLAN_IE_SSID)pMgmt->abyDesireSSID)->abySSID);
//memcpy(pMgmt->abyAdHocSSID,pMgmt->abyDesireSSID,
//((PWLAN_IE_SSID)pMgmt->abyDesireSSID)->len + WLAN_IEHDR_LEN);
......@@ -710,7 +706,6 @@ vCommandTimer(
}
#ifdef TxInSleep
if (pDevice->IsTxDataTrigger != false) { //TxDataTimer is not triggered at the first time
// printk("Re-initial TxDataTimer****\n");
del_timer(&pDevice->sTimerTxData);
init_timer(&pDevice->sTimerTxData);
pDevice->sTimerTxData.data = (unsigned long) pDevice;
......@@ -720,7 +715,6 @@ vCommandTimer(
pDevice->nTxDataTimeCout = 0;
}
else {
// printk("mike:-->First time trigger TimerTxData InSleep\n");
}
pDevice->IsTxDataTrigger = true;
add_timer(&pDevice->sTimerTxData);
......@@ -1094,8 +1088,6 @@ BSSvSecondTxData(
if (pDevice->nTxDataTimeCout < 4) //don't tx data if timer less than 40s
{
// printk("mike:%s-->no data Tx not exceed the desired Time as %d\n",__FUNCTION__,
// (int)pDevice->nTxDataTimeCout);
pDevice->sTimerTxData.expires = RUN_AT(10*HZ); //10s callback
add_timer(&pDevice->sTimerTxData);
return;
......@@ -1108,8 +1100,6 @@ BSSvSecondTxData(
#else
if (pDevice->bLinkPass == true) {
#endif
// printk("mike:%s-->InSleep Tx Data Procedure\n",__FUNCTION__);
pDevice->fTxDataInSleep = true;
PSbSendNullPacket(pDevice); //send null packet
pDevice->fTxDataInSleep = false;
......
drivers/staging/vt6655/wmgr.c
浏览文件 @ f2046f93
......@@ -2102,9 +2102,6 @@ s_vMgrRxBeacon(
&(pMgmt->sNodeDBTable[0].byTopCCKBasicRate),
&(pMgmt->sNodeDBTable[0].byTopOFDMBasicRate)
);
#ifdef PLICE_DEBUG
//printk("RxBeacon:MaxSuppRate is %d\n",pMgmt->sNodeDBTable[0].wMaxSuppRate);
#endif
if (bUpdatePhyParameter == true) {
CARDbSetPhyParameter(pMgmt->pAdapter,
pMgmt->eCurrentPHYMode,
......
drivers/staging/vt6655/wpactl.c
浏览文件 @ f2046f93
......@@ -658,15 +658,6 @@ static int wpa_get_scan(PSDevice pDevice,
}
kfree(ptempBSS);
// printk("bubble sort result:\n");
//for (ii = 0; ii < MAX_BSS_NUM; ii++)
// printk("%d [%s]:RSSI=%d\n",ii,((PWLAN_IE_SSID)(pMgmt->sBSSList[ii].abySSID))->abySSID,
// pMgmt->sBSSList[ii].uRSSI);
#endif
//******mike:bubble sort by stronger RSSI*****//
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或