Merge tag 'devicetree-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:
 - added Frank Rowand as DT maintainer in preparation for Grant's
   retirement.
 - generic MSI binding documentation and a few other minor doc updates
 - fix long standing issue with DT platorm device unregistration
 - fix loop forever bug in of_find_matching_node_by_address()

* tag 'devicetree-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  MAINTAINERS: Add Frank Rowand as DT maintainer
  mtd: nand: pxa3xx: add optional dma for pxa architecture
  Documentation: DT: cpsw: document missing compatible
  Docs: dt: add generic MSI bindings
  drivercore: Fix unregistration path of platform devices
  of/address: Don't loop forever in of_find_matching_node_by_address().
  of: Add vendor prefix for JEDEC Solid State Technology Association
  of/platform: add function to populate default bus
  of: Add vendor prefix for Sharp Corporation

Documentation/devicetree/bindings/interrupt-controller/msi.txt

+This document describes the generic device tree binding for MSI controllers and
+their master(s).
+
+Message Signaled Interrupts (MSIs) are a class of interrupts generated by a
+write to an MMIO address.
+
+MSIs were originally specified by PCI (and are used with PCIe), but may also be
+used with other busses, and hence a mechanism is required to relate devices on
+those busses to the MSI controllers which they are capable of using,
+potentially including additional information.
+
+MSIs are distinguished by some combination of:
+
+- The doorbell (the MMIO address written to).
+  
+  Devices may be configured by software to write to arbitrary doorbells which
+  they can address. An MSI controller may feature a number of doorbells.
+
+- The payload (the value written to the doorbell).
+  
+  Devices may be configured to write an arbitrary payload chosen by software.
+  MSI controllers may have restrictions on permitted payloads.
+
+- Sideband information accompanying the write.
+  
+  Typically this is neither configurable nor probeable, and depends on the path
+  taken through the memory system (i.e. it is a property of the combination of
+  MSI controller and device rather than a property of either in isolation).
+
+
+MSI controllers:
+================
+
+An MSI controller signals interrupts to a CPU when a write is made to an MMIO
+address by some master. An MSI controller may feature a number of doorbells.
+
+Required properties:
+--------------------
+
+- msi-controller: Identifies the node as an MSI controller.
+
+Optional properties:
+--------------------
+
+- #msi-cells: The number of cells in an msi-specifier, required if not zero.
+
+  Typically this will encode information related to sideband data, and will
+  not encode doorbells or payloads as these can be configured dynamically.
+
+  The meaning of the msi-specifier is defined by the device tree binding of
+  the specific MSI controller. 
+
+
+MSI clients
+===========
+
+MSI clients are devices which generate MSIs. For each MSI they wish to
+generate, the doorbell and payload may be configured, though sideband
+information may not be configurable.
+
+Required properties:
+--------------------
+
+- msi-parent: A list of phandle + msi-specifier pairs, one for each MSI
+  controller which the device is capable of using.
+
+  This property is unordered, and MSIs may be allocated from any combination of
+  MSI controllers listed in the msi-parent property.
+
+  If a device has restrictions on the allocation of MSIs, these restrictions
+  must be described with additional properties.
+
+  When #msi-cells is non-zero, busses with an msi-parent will require
+  additional properties to describe the relationship between devices on the bus
+  and the set of MSIs they can potentially generate.
+
+
+Example
+=======
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	msi_a: msi-controller@a {
+		reg = <0xa 0xf00>;
+		compatible = "vendor-a,some-controller";
+		msi-controller;
+		/* No sideband data, so #msi-cells omitted */
+	};
+
+	msi_b: msi-controller@b {
+		reg = <0xb 0xf00>;
+		compatible = "vendor-b,another-controller";
+		msi-controller;
+		/* Each device has some unique ID */
+		#msi-cells = <1>;
+	};
+
+	msi_c: msi-controller@c {
+		reg = <0xb 0xf00>;
+		compatible = "vendor-b,another-controller";
+		msi-controller;
+		/* Each device has some unique ID */
+		#msi-cells = <1>;
+	};
+
+	dev@0 {
+		reg = <0x0 0xf00>;
+		compatible = "vendor-c,some-device";
+
+		/* Can only generate MSIs to msi_a */
+		msi-parent = <&msi_a>;
+	};
+
+	dev@1 {
+		reg = <0x1 0xf00>;
+		compatible = "vendor-c,some-device";
+
+		/* 
+		 * Can generate MSIs to either A or B.
+		 */
+		msi-parent = <&msi_a>, <&msi_b 0x17>;
+	};
+
+	dev@2 {
+		reg = <0x2 0xf00>;
+		compatible = "vendor-c,some-device";
+		/*
+		 * Has different IDs at each MSI controller.
+		 * Can generate MSIs to all of the MSI controllers.
+		 */
+		msi-parent = <&msi_a>, <&msi_b 0x17>, <&msi_c 0x53>;
+	};
+};

Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt

@@ -11,6 +11,7 @@ Required properties:
 
 Optional properties:
 
+ - dmas:			dma data channel, see dma.txt binding doc
  - marvell,nand-enable-arbiter:	Set to enable the bus arbiter
  - marvell,nand-keep-config:	Set to keep the NAND controller config as set
 				by the bootloader
@@ -32,6 +33,8 @@ Example:
 		compatible = "marvell,pxa3xx-nand";
 		reg = <0x43100000 90>;
 		interrupts = <45>;
+		dmas = <&pdma 97 0>;
+		dma-names = "data";
 		#address-cells = <1>;
 
 		marvell,nand-enable-arbiter;

Documentation/devicetree/bindings/net/cpsw.txt

@@ -2,7 +2,11 @@ TI SoC Ethernet Switch Controller Device Tree Bindings
 ------------------------------------------------------
 
 Required properties:
-- compatible		: Should be "ti,cpsw"
+- compatible		: Should be one of the below:-
+			  "ti,cpsw" for backward compatible
+			  "ti,am335x-cpsw" for AM335x controllers
+			  "ti,am4372-cpsw" for AM437x controllers
+			  "ti,dra7-cpsw" for DRA7x controllers
 - reg			: physical base address and size of the cpsw
 			  registers map
 - interrupts		: property with a value describing the interrupt

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -113,6 +113,7 @@ intel	Intel Corporation
 intercontrol	Inter Control Group
 isee	ISEE 2007 S.L.
 isil	Intersil
+jedec	JEDEC Solid State Technology Association
 karo	Ka-Ro electronics GmbH
 keymile	Keymile GmbH
 kinetic Kinetic Technologies
@@ -184,6 +185,7 @@ sbs	Smart Battery System
 schindler	Schindler
 seagate	Seagate Technology PLC
 semtech	Semtech Corporation
+sharp	Sharp Corporation
 sil	Silicon Image
 silabs	Silicon Laboratories
 siliconmitus	Silicon Mitus, Inc.

MAINTAINERS

@@ -7573,8 +7573,9 @@ F:	Documentation/i2c/busses/i2c-ocores
 F:	drivers/i2c/busses/i2c-ocores.c
 
 OPEN FIRMWARE AND FLATTENED DEVICE TREE
-M:	Grant Likely <grant.likely@linaro.org>
 M:	Rob Herring <robh+dt@kernel.org>
+M:	Frank Rowand <frowand.list@gmail.com>
+M:	Grant Likely <grant.likely@linaro.org>
 L:	devicetree@vger.kernel.org
 W:	http://www.devicetree.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux.git

drivers/base/platform.c

@@ -375,9 +375,7 @@ int platform_device_add(struct platform_device *pdev)
 
 	while (--i >= 0) {
 		struct resource *r = &pdev->resource[i];
-		unsigned long type = resource_type(r);
-
-		if (type == IORESOURCE_MEM || type == IORESOURCE_IO)
+		if (r->parent)
 			release_resource(r);
 	}
 
@@ -408,9 +406,7 @@ void platform_device_del(struct platform_device *pdev)
 
 		for (i = 0; i < pdev->num_resources; i++) {
 			struct resource *r = &pdev->resource[i];
-			unsigned long type = resource_type(r);
-
-			if (type == IORESOURCE_MEM || type == IORESOURCE_IO)
+			if (r->parent)
 				release_resource(r);
 		}
 	}

drivers/of/address.c

@@ -845,10 +845,10 @@ struct device_node *of_find_matching_node_by_address(struct device_node *from,
 	struct resource res;
 
 	while (dn) {
-		if (of_address_to_resource(dn, 0, &res))
-			continue;
-		if (res.start == base_address)
+		if (!of_address_to_resource(dn, 0, &res) &&
+		    res.start == base_address)
 			return dn;
+
 		dn = of_find_matching_node(dn, matches);
 	}
 

drivers/of/platform.c

@@ -457,6 +457,15 @@ int of_platform_populate(struct device_node *root,
 }
 EXPORT_SYMBOL_GPL(of_platform_populate);
 
+int of_platform_default_populate(struct device_node *root,
+				 const struct of_dev_auxdata *lookup,
+				 struct device *parent)
+{
+	return of_platform_populate(root, of_default_bus_match_table, lookup,
+				    parent);
+}
+EXPORT_SYMBOL_GPL(of_platform_default_populate);
+
 static int of_platform_device_destroy(struct device *dev, void *data)
 {
 	/* Do not touch devices not populated from the device tree */

include/linux/of_platform.h

@@ -72,6 +72,9 @@ extern int of_platform_populate(struct device_node *root,
 				const struct of_device_id *matches,
 				const struct of_dev_auxdata *lookup,
 				struct device *parent);
+extern int of_platform_default_populate(struct device_node *root,
+					const struct of_dev_auxdata *lookup,
+					struct device *parent);
 extern void of_platform_depopulate(struct device *parent);
 #else
 static inline int of_platform_populate(struct device_node *root,
@@ -81,6 +84,12 @@ static inline int of_platform_populate(struct device_node *root,
 {
 	return -ENODEV;
 }
+static inline int of_platform_default_populate(struct device_node *root,
+					       const struct of_dev_auxdata *lookup,
+					       struct device *parent)
+{
+	return -ENODEV;
+}
 static inline void of_platform_depopulate(struct device *parent) { }
 #endif