Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 f0889638 编写于 作者: T Tobin C. Harding 提交者： Jens Axboe
浏览文件
操作

cciss: Fix checkpatch TRAILING_WHITESPACE 

Checkpatch emits 85 trailing whitespace warnings.

Remove trailing whitespace.
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Acked-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NJens Axboe <axboe@fb.com>
上级 77039b96
隐藏空白更改
内联 并排
Showing with 85 addition and 85 deletion
drivers/block/cciss_scsi.c
浏览文件 @ f0889638
......@@ -17,15 +17,15 @@
* 02111-1307, USA.
*
* Questions/Comments/Bugfixes to iss_storagedev@hp.com
*
*
* Author: Stephen M. Cameron
*/
#ifdef CONFIG_CISS_SCSI_TAPE
/* Here we have code to present the driver as a scsi driver
as it is simultaneously presented as a block driver. The
/* Here we have code to present the driver as a scsi driver
as it is simultaneously presented as a block driver. The
reason for doing this is to allow access to SCSI tape drives
through the array controller. Note in particular, neither
through the array controller. Note in particular, neither
physical nor logical disks are presented through the scsi layer. */
#include <linux/timer.h>
......@@ -37,7 +37,7 @@
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_host.h>
#include "cciss_scsi.h"
......@@ -120,7 +120,7 @@ struct cciss_scsi_adapter_data_t {
struct cciss_scsi_cmd_stack_t cmd_stack;
SGDescriptor_struct **cmd_sg_list;
int registered;
spinlock_t lock; // to protect ccissscsi[ctlr];
spinlock_t lock; // to protect ccissscsi[ctlr];
};
#define CPQ_TAPE_LOCK(h, flags) spin_lock_irqsave( \
......@@ -143,36 +143,36 @@ scsi_cmd_alloc(ctlr_info_t *h)
u64bit temp64;
sa = h->scsi_ctlr;
stk = &sa->cmd_stack;
stk = &sa->cmd_stack;
if (stk->top < 0)
if (stk->top < 0)
return NULL;
c = stk->elem[stk->top];
c = stk->elem[stk->top];
/* memset(c, 0, sizeof(*c)); */
memset(&c->cmd, 0, sizeof(c->cmd));
memset(&c->Err, 0, sizeof(c->Err));
/* set physical addr of cmd and addr of scsi parameters */
c->cmd.busaddr = c->busaddr;
c->cmd.busaddr = c->busaddr;
c->cmd.cmdindex = c->cmdindex;
/* (__u32) (stk->cmd_pool_handle +
/* (__u32) (stk->cmd_pool_handle +
(sizeof(struct cciss_scsi_cmd_stack_elem_t)*stk->top)); */
temp64.val = (__u64) (c->busaddr + sizeof(CommandList_struct));
/* (__u64) (stk->cmd_pool_handle +
/* (__u64) (stk->cmd_pool_handle +
(sizeof(struct cciss_scsi_cmd_stack_elem_t)*stk->top) +
sizeof(CommandList_struct)); */
stk->top--;
c->cmd.ErrDesc.Addr.lower = temp64.val32.lower;
c->cmd.ErrDesc.Addr.upper = temp64.val32.upper;
c->cmd.ErrDesc.Len = sizeof(ErrorInfo_struct);
c->cmd.ctlr = h->ctlr;
c->cmd.err_info = &c->Err;
return (CommandList_struct *) c;
}
static void
static void
scsi_cmd_free(ctlr_info_t *h, CommandList_struct *c)
{
/* assume only one process in here at a time, locking done by caller. */
......@@ -183,7 +183,7 @@ scsi_cmd_free(ctlr_info_t *h, CommandList_struct *c)
struct cciss_scsi_cmd_stack_t *stk;
sa = h->scsi_ctlr;
stk = &sa->cmd_stack;
stk = &sa->cmd_stack;
stk->top++;
if (stk->top >= stk->nelems) {
dev_err(&h->pdev->dev,
......@@ -228,7 +228,7 @@ scsi_cmd_stack_setup(ctlr_info_t *h, struct cciss_scsi_adapter_data_t *sa)
}
for (i = 0; i < stk->nelems; i++) {
stk->elem[i] = &stk->pool[i];
stk->elem[i]->busaddr = (__u32) (stk->cmd_pool_handle +
stk->elem[i]->busaddr = (__u32) (stk->cmd_pool_handle +
(sizeof(struct cciss_scsi_cmd_stack_elem_t) * i));
stk->elem[i]->cmdindex = i;
}
......@@ -244,7 +244,7 @@ scsi_cmd_stack_free(ctlr_info_t *h)
size_t size;
sa = h->scsi_ctlr;
stk = &sa->cmd_stack;
stk = &sa->cmd_stack;
if (stk->top != stk->nelems-1) {
dev_warn(&h->pdev->dev,
"bug: %d scsi commands are still outstanding.\n",
......@@ -266,7 +266,7 @@ print_cmd(CommandList_struct *cp)
printk("queue:%d\n", cp->Header.ReplyQueue);
printk("sglist:%d\n", cp->Header.SGList);
printk("sgtot:%d\n", cp->Header.SGTotal);
printk("Tag:0x%08x/0x%08x\n", cp->Header.Tag.upper,
printk("Tag:0x%08x/0x%08x\n", cp->Header.Tag.upper,
cp->Header.Tag.lower);
printk("LUN:0x%8phN\n", cp->Header.LUN.LunAddrBytes);
printk("CDBLen:%d\n", cp->Request.CDBLen);
......@@ -275,8 +275,8 @@ print_cmd(CommandList_struct *cp)
printk(" Dir:%d\n",cp->Request.Type.Direction);
printk("Timeout:%d\n",cp->Request.Timeout);
printk("CDB: %16ph\n", cp->Request.CDB);
printk("edesc.Addr: 0x%08x/0%08x, Len = %d\n",
cp->ErrDesc.Addr.upper, cp->ErrDesc.Addr.lower,
printk("edesc.Addr: 0x%08x/0%08x, Len = %d\n",
cp->ErrDesc.Addr.upper, cp->ErrDesc.Addr.lower,
cp->ErrDesc.Len);
printk("sgs..........Errorinfo:\n");
printk("scsistatus:%d\n", cp->err_info->ScsiStatus);
......@@ -289,7 +289,7 @@ print_cmd(CommandList_struct *cp)
}
#endif
static int
static int
find_bus_target_lun(ctlr_info_t *h, int *bus, int *target, int *lun)
{
/* finds an unused bus, target, lun for a new device */
......@@ -299,24 +299,24 @@ find_bus_target_lun(ctlr_info_t *h, int *bus, int *target, int *lun)
memset(&target_taken[0], 0, CCISS_MAX_SCSI_DEVS_PER_HBA);
target_taken[SELF_SCSI_ID] = 1;
target_taken[SELF_SCSI_ID] = 1;
for (i = 0; i < ccissscsi[h->ctlr].ndevices; i++)
target_taken[ccissscsi[h->ctlr].dev[i].target] = 1;
for (i = 0; i < CCISS_MAX_SCSI_DEVS_PER_HBA; i++) {
if (!target_taken[i]) {
*bus = 0; *target=i; *lun = 0; found=1;
break;
}
}
return (!found);
return (!found);
}
struct scsi2map {
char scsi3addr[8];
int bus, target, lun;
};
static int
static int
cciss_scsi_add_entry(ctlr_info_t *h, int hostno,
struct cciss_scsi_dev_t *device,
struct scsi2map *added, int *nadded)
......@@ -381,8 +381,8 @@ cciss_scsi_add_entry(ctlr_info_t *h, int hostno,
ccissscsi[h->ctlr].ndevices++;
/* initially, (before registering with scsi layer) we don't
know our hostno and we don't want to print anything first
/* initially, (before registering with scsi layer) we don't
know our hostno and we don't want to print anything first
time anyway (the scsi layer's inquiries will show that info) */
if (hostno != -1)
dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d added.\n",
......@@ -467,7 +467,7 @@ adjust_cciss_scsi_table(ctlr_info_t *h, int hostno,
/* sd contains scsi3 addresses and devtypes, but
bus target and lun are not filled in. This funciton
takes what's in sd to be the current and adjusts
ccissscsi[] to be in line with what's in sd. */
ccissscsi[] to be in line with what's in sd. */
int i,j, found, changes=0;
struct cciss_scsi_dev_t *csd;
......@@ -492,7 +492,7 @@ adjust_cciss_scsi_table(ctlr_info_t *h, int hostno,
if (hostno != -1) /* if it's not the first time... */
sh = h->scsi_ctlr->scsi_host;
/* find any devices in ccissscsi[] that are not in
/* find any devices in ccissscsi[] that are not in
sd[] and remove them from ccissscsi[] */
i = 0;
......@@ -512,7 +512,7 @@ adjust_cciss_scsi_table(ctlr_info_t *h, int hostno,
}
}
if (found == 0) { /* device no longer present. */
if (found == 0) { /* device no longer present. */
changes++;
cciss_scsi_remove_entry(h, hostno, i,
removed, &nremoved);
......@@ -641,14 +641,14 @@ lookup_scsi3addr(ctlr_info_t *h, int bus, int target, int lun, char *scsi3addr)
return -1;
}
static void
static void
cciss_scsi_setup(ctlr_info_t *h)
{
struct cciss_scsi_adapter_data_t * shba;
ccissscsi[h->ctlr].ndevices = 0;
shba = (struct cciss_scsi_adapter_data_t *)
kmalloc(sizeof(*shba), GFP_KERNEL);
kmalloc(sizeof(*shba), GFP_KERNEL);
if (shba == NULL)
return;
shba->scsi_host = NULL;
......@@ -693,20 +693,20 @@ static void complete_scsi_command(CommandList_struct *c, int timeout,
/* copy the sense data whether we need to or not. */
memcpy(cmd->sense_buffer, ei->SenseInfo,
memcpy(cmd->sense_buffer, ei->SenseInfo,
ei->SenseLen > SCSI_SENSE_BUFFERSIZE ?
SCSI_SENSE_BUFFERSIZE :
SCSI_SENSE_BUFFERSIZE :
ei->SenseLen);
scsi_set_resid(cmd, ei->ResidualCnt);
if(ei->CommandStatus != 0)
{ /* an error has occurred */
if(ei->CommandStatus != 0)
{ /* an error has occurred */
switch(ei->CommandStatus)
{
case CMD_TARGET_STATUS:
/* Pass it up to the upper layers... */
if (!ei->ScsiStatus) {
/* Ordinarily, this case should never happen, but there is a bug
in some released firmware revisions that allows it to happen
if, for example, a 4100 backplane loses power and the tape
......@@ -731,7 +731,7 @@ static void complete_scsi_command(CommandList_struct *c, int timeout,
print_cmd(c);
*/
/* We get CMD_INVALID if you address a non-existent tape drive instead
of a selection timeout (no response). You will see this if you yank
of a selection timeout (no response). You will see this if you yank
out a tape drive, then try to access it. This is kind of a shame
because it means that any other CMD_INVALID (e.g. driver bug) will
get interpreted as a missing target. */
......@@ -780,7 +780,7 @@ static void complete_scsi_command(CommandList_struct *c, int timeout,
cmd->result = DID_ERROR << 16;
dev_warn(&h->pdev->dev,
"%p returned unknown status %x\n", c,
ei->CommandStatus);
ei->CommandStatus);
}
}
cmd->scsi_done(cmd);
......@@ -796,15 +796,15 @@ cciss_scsi_detect(ctlr_info_t *h)
sh = scsi_host_alloc(&cciss_driver_template, sizeof(struct ctlr_info *));
if (sh == NULL)
goto fail;
sh->io_port = 0; // good enough? FIXME,
sh->io_port = 0; // good enough? FIXME,
sh->n_io_port = 0; // I don't think we use these two...
sh->this_id = SELF_SCSI_ID;
sh->this_id = SELF_SCSI_ID;
sh->can_queue = cciss_tape_cmds;
sh->sg_tablesize = h->maxsgentries;
sh->max_cmd_len = MAX_COMMAND_SIZE;
sh->max_sectors = h->cciss_max_sectors;
((struct cciss_scsi_adapter_data_t *)
((struct cciss_scsi_adapter_data_t *)
h->scsi_ctlr)->scsi_host = sh;
sh->hostdata[0] = (unsigned long) h;
sh->irq = h->intr[SIMPLE_MODE_INT];
......@@ -856,7 +856,7 @@ cciss_map_one(struct pci_dev *pdev,
static int
cciss_scsi_do_simple_cmd(ctlr_info_t *h,
CommandList_struct *c,
unsigned char *scsi3addr,
unsigned char *scsi3addr,
unsigned char *cdb,
unsigned char cdblen,
unsigned char *buf, int bufsize,
......@@ -871,7 +871,7 @@ cciss_scsi_do_simple_cmd(ctlr_info_t *h,
c->Header.Tag.lower = c->busaddr; /* Use k. address of cmd as tag */
// Fill in the request block...
/* printk("Using scsi3addr 0x%02x%0x2%0x2%0x2%0x2%0x2%0x2%0x2\n",
/* printk("Using scsi3addr 0x%02x%0x2%0x2%0x2%0x2%0x2%0x2%0x2\n",
scsi3addr[0], scsi3addr[1], scsi3addr[2], scsi3addr[3],
scsi3addr[4], scsi3addr[5], scsi3addr[6], scsi3addr[7]); */
......@@ -885,7 +885,7 @@ cciss_scsi_do_simple_cmd(ctlr_info_t *h,
/* Fill in the SG list and do dma mapping */
cciss_map_one(h->pdev, c, (unsigned char *) buf,
bufsize, DMA_FROM_DEVICE);
bufsize, DMA_FROM_DEVICE);
c->waiting = &wait;
enqueue_cmd_and_start_io(h, c);
......@@ -896,7 +896,7 @@ cciss_scsi_do_simple_cmd(ctlr_info_t *h,
return(0);
}
static void
static void
cciss_scsi_interpret_error(ctlr_info_t *h, CommandList_struct *c)
{
ErrorInfo_struct *ei;
......@@ -1005,7 +1005,7 @@ cciss_scsi_do_inquiry(ctlr_info_t *h, unsigned char *scsi3addr,
if (rc != 0) return rc; /* something went wrong */
if (ei->CommandStatus != 0 &&
if (ei->CommandStatus != 0 &&
ei->CommandStatus != CMD_DATA_UNDERRUN) {
cciss_scsi_interpret_error(h, c);
rc = -1;
......@@ -1013,7 +1013,7 @@ cciss_scsi_do_inquiry(ctlr_info_t *h, unsigned char *scsi3addr,
spin_lock_irqsave(&h->lock, flags);
scsi_cmd_free(h, c);
spin_unlock_irqrestore(&h->lock, flags);
return rc;
return rc;
}
/* Get the device id from inquiry page 0x83 */
......@@ -1042,7 +1042,7 @@ cciss_scsi_do_report_phys_luns(ctlr_info_t *h,
int rc;
CommandList_struct *c;
unsigned char cdb[12];
unsigned char scsi3addr[8];
unsigned char scsi3addr[8];
ErrorInfo_struct *ei;
unsigned long flags;
......@@ -1069,14 +1069,14 @@ cciss_scsi_do_report_phys_luns(ctlr_info_t *h,
cdb[11] = 0;
rc = cciss_scsi_do_simple_cmd(h, c, scsi3addr,
cdb, 12,
(unsigned char *) buf,
cdb, 12,
(unsigned char *) buf,
bufsize, XFER_READ);
if (rc != 0) return rc; /* something went wrong */
ei = c->err_info;
if (ei->CommandStatus != 0 &&
if (ei->CommandStatus != 0 &&
ei->CommandStatus != CMD_DATA_UNDERRUN) {
cciss_scsi_interpret_error(h, c);
rc = -1;
......@@ -1084,36 +1084,36 @@ cciss_scsi_do_report_phys_luns(ctlr_info_t *h,
spin_lock_irqsave(&h->lock, flags);
scsi_cmd_free(h, c);
spin_unlock_irqrestore(&h->lock, flags);
return rc;
return rc;
}
static void
cciss_update_non_disk_devices(ctlr_info_t *h, int hostno)
{
/* the idea here is we could get notified from /proc
that some devices have changed, so we do a report
physical luns cmd, and adjust our list of devices
that some devices have changed, so we do a report
physical luns cmd, and adjust our list of devices
accordingly. (We can't rely on the scsi-mid layer just
doing inquiries, because the "busses" that the scsi
doing inquiries, because the "busses" that the scsi
mid-layer probes are totally fabricated by this driver,
so new devices wouldn't show up.
the scsi3addr's of devices won't change so long as the
adapter is not reset. That means we can rescan and
tell which devices we already know about, vs. new
the scsi3addr's of devices won't change so long as the
adapter is not reset. That means we can rescan and
tell which devices we already know about, vs. new
devices, vs. disappearing devices.
Also, if you yank out a tape drive, then put in a disk
in it's place, (say, a configured volume from another
array controller for instance) _don't_ poke this driver
(so it thinks it's still a tape, but _do_ poke the scsi
mid layer, so it does an inquiry... the scsi mid layer
in it's place, (say, a configured volume from another
array controller for instance) _don't_ poke this driver
(so it thinks it's still a tape, but _do_ poke the scsi
mid layer, so it does an inquiry... the scsi mid layer
will see the physical disk. This would be bad. Need to
think about how to prevent that. One idea would be to
think about how to prevent that. One idea would be to
snoop all scsi responses and if an inquiry repsonse comes
back that reports a disk, chuck it an return selection
timeout instead and adjust our table... Not sure i like
that though.
that though.
*/
#define OBDR_TAPE_INQ_SIZE 49
......@@ -1141,9 +1141,9 @@ cciss_update_non_disk_devices(ctlr_info_t *h, int hostno)
ch = &ld_buff->LUNListLength[0];
num_luns = ((ch[0]<<24) | (ch[1]<<16) | (ch[2]<<8) | ch[3]) / 8;
if (num_luns > CISS_MAX_PHYS_LUN) {
printk(KERN_WARNING
printk(KERN_WARNING
"cciss: Maximum physical LUNs (%d) exceeded. "
"%d LUNs ignored.\n", CISS_MAX_PHYS_LUN,
"%d LUNs ignored.\n", CISS_MAX_PHYS_LUN,
num_luns - CISS_MAX_PHYS_LUN);
num_luns = CISS_MAX_PHYS_LUN;
}
......@@ -1154,7 +1154,7 @@ cciss_update_non_disk_devices(ctlr_info_t *h, int hostno)
}
/* adjust our table of devices */
/* adjust our table of devices */
for (i = 0; i < num_luns; i++) {
/* for each physical lun, do an inquiry */
if (ld_buff->LUN[i][3] & 0xC0) continue;
......@@ -1213,7 +1213,7 @@ cciss_update_non_disk_devices(ctlr_info_t *h, int hostno)
currentsd[ncurrent] = *this_device;
ncurrent++;
break;
default:
default:
break;
}
}
......@@ -1258,8 +1258,8 @@ cciss_scsi_write_info(struct Scsi_Host *sh,
return -EINVAL;
return cciss_scsi_user_command(h, sh->host_no,
buffer, length);
}
buffer, length);
}
static int
cciss_scsi_show_info(struct seq_file *m, struct Scsi_Host *sh)
......@@ -1297,8 +1297,8 @@ cciss_scsi_show_info(struct seq_file *m, struct Scsi_Host *sh)
return 0;
}
/* cciss_scatter_gather takes a struct scsi_cmnd, (cmd), and does the pci
dma mapping and fills in the scatter gather entries of the
/* cciss_scatter_gather takes a struct scsi_cmnd, (cmd), and does the pci
dma mapping and fills in the scatter gather entries of the
cciss command, c. */
static void cciss_scatter_gather(ctlr_info_t *h, CommandList_struct *c,
......@@ -1394,7 +1394,7 @@ cciss_scsi_queue_command_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmn
// Fill in the command list header
cmd->scsi_done = done; // save this for use by completion code
cmd->scsi_done = done; // save this for use by completion code
/* save c in case we have to abort it */
cmd->host_scribble = (unsigned char *) c;
......@@ -1404,7 +1404,7 @@ cciss_scsi_queue_command_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmn
c->Header.ReplyQueue = 0; /* unused in simple mode */
memcpy(&c->Header.LUN.LunAddrBytes[0], &scsi3addr[0], 8);
c->Header.Tag.lower = c->busaddr; /* Use k. address of cmd as tag */
// Fill in the request block...
c->Request.Timeout = 0;
......@@ -1432,15 +1432,15 @@ cciss_scsi_queue_command_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmn
c->Request.Type.Direction = XFER_RSVD;
// This is technically wrong, and cciss controllers should
// reject it with CMD_INVALID, which is the most correct
// response, but non-fibre backends appear to let it
// reject it with CMD_INVALID, which is the most correct
// response, but non-fibre backends appear to let it
// slide by, and give the same results as if this field
// were set correctly. Either way is acceptable for
// our purposes here.
break;
default:
default:
dev_warn(&h->pdev->dev, "unknown data direction: %d\n",
cmd->sc_data_direction);
BUG();
......@@ -1464,9 +1464,9 @@ static void cciss_unregister_scsi(ctlr_info_t *h)
spin_lock_irqsave(&h->lock, flags);
sa = h->scsi_ctlr;
stk = &sa->cmd_stack;
stk = &sa->cmd_stack;
/* if we weren't ever actually registered, don't unregister */
/* if we weren't ever actually registered, don't unregister */
if (sa->registered) {
spin_unlock_irqrestore(&h->lock, flags);
scsi_remove_host(sa->scsi_host);
......@@ -1474,7 +1474,7 @@ static void cciss_unregister_scsi(ctlr_info_t *h)
spin_lock_irqsave(&h->lock, flags);
}
/* set scsi_host to NULL so our detect routine will
/* set scsi_host to NULL so our detect routine will
find us on register */
sa->scsi_host = NULL;
spin_unlock_irqrestore(&h->lock, flags);
......@@ -1490,7 +1490,7 @@ static int cciss_engage_scsi(ctlr_info_t *h)
spin_lock_irqsave(&h->lock, flags);
sa = h->scsi_ctlr;
stk = &sa->cmd_stack;
stk = &sa->cmd_stack;
if (sa->registered) {
dev_info(&h->pdev->dev, "SCSI subsystem already engaged.\n");
......@@ -1586,13 +1586,13 @@ static int wait_for_device_to_become_ready(ctlr_info_t *h,
return rc;
}
/* Need at least one of these error handlers to keep ../scsi/hosts.c from
* complaining. Doing a host- or bus-reset can't do anything good here.
/* Need at least one of these error handlers to keep ../scsi/hosts.c from
* complaining. Doing a host- or bus-reset can't do anything good here.
* Despite what it might say in scsi_error.c, there may well be commands
* on the controller, as the cciss driver registers twice, once as a block
* device for the logical drives, and once as a scsi device, for any tape
* drives. So we know there are no commands out on the tape drives, but we
* don't know there are no commands on the controller, and it is likely
* don't know there are no commands on the controller, and it is likely
* that there probably are, as the cciss block device is most commonly used
* as a boot device (embedded controller on HP/Compaq systems.)
*/
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或