提交 f036e4f4 编写于 作者: R Rajesh Borundia 提交者: David S. Miller

qlcnic: VF reset recovery implementation.

o Implement recovery mechanism for VF to recover from
  adapter resets.
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com>
Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 97d8105c
......@@ -976,6 +976,7 @@ struct qlcnic_adapter {
u8 fw_fail_cnt;
u8 tx_timeo_cnt;
u8 need_fw_reset;
u8 reset_ctx_cnt;
u16 is_up;
u16 pvid;
......
......@@ -339,12 +339,13 @@ inline void qlcnic_83xx_enable_legacy_msix_mbx_intr(struct qlcnic_adapter
writel(0, adapter->ahw->pci_base0 + mask);
}
inline void qlcnic_83xx_disable_mbx_intr(struct qlcnic_adapter *adapter)
void qlcnic_83xx_disable_mbx_intr(struct qlcnic_adapter *adapter)
{
u32 mask;
mask = QLCRDX(adapter->ahw, QLCNIC_DEF_INT_MASK);
writel(1, adapter->ahw->pci_base0 + mask);
QLCWRX(adapter->ahw, QLCNIC_MBX_INTR_ENBL, 0);
}
static inline void qlcnic_83xx_get_mbx_data(struct qlcnic_adapter *adapter,
......@@ -453,17 +454,15 @@ irqreturn_t qlcnic_83xx_tmp_intr(int irq, void *data)
void qlcnic_83xx_free_mbx_intr(struct qlcnic_adapter *adapter)
{
u32 val = 0, num_msix = adapter->ahw->num_msix - 1;
u32 num_msix;
qlcnic_83xx_disable_mbx_intr(adapter);
if (adapter->flags & QLCNIC_MSIX_ENABLED)
num_msix = adapter->ahw->num_msix - 1;
else
num_msix = 0;
QLCWRX(adapter->ahw, QLCNIC_MBX_INTR_ENBL, val);
qlcnic_83xx_disable_mbx_intr(adapter);
msleep(20);
synchronize_irq(adapter->msix_entries[num_msix].vector);
free_irq(adapter->msix_entries[num_msix].vector, adapter);
......
......@@ -317,6 +317,18 @@ struct qlc_83xx_idc {
char **name;
};
/* Device States */
enum qlcnic_83xx_states {
QLC_83XX_IDC_DEV_UNKNOWN,
QLC_83XX_IDC_DEV_COLD,
QLC_83XX_IDC_DEV_INIT,
QLC_83XX_IDC_DEV_READY,
QLC_83XX_IDC_DEV_NEED_RESET,
QLC_83XX_IDC_DEV_NEED_QUISCENT,
QLC_83XX_IDC_DEV_FAILED,
QLC_83XX_IDC_DEV_QUISCENT
};
#define QLCNIC_MBX_RSP(reg) LSW(reg)
#define QLCNIC_MBX_NUM_REGS(reg) (MSW(reg) & 0x1FF)
#define QLCNIC_MBX_STATUS(reg) (((reg) >> 25) & 0x7F)
......@@ -536,6 +548,7 @@ void qlcnic_83xx_config_intr_coal(struct qlcnic_adapter *);
irqreturn_t qlcnic_83xx_handle_aen(int, void *);
int qlcnic_83xx_get_port_info(struct qlcnic_adapter *);
void qlcnic_83xx_enable_mbx_intrpt(struct qlcnic_adapter *);
void qlcnic_83xx_disable_mbx_intr(struct qlcnic_adapter *);
irqreturn_t qlcnic_83xx_clear_legacy_intr(struct qlcnic_adapter *);
irqreturn_t qlcnic_83xx_intr(int, void *);
irqreturn_t qlcnic_83xx_tmp_intr(int, void *);
......
......@@ -115,18 +115,6 @@ static const char *const qlc_83xx_idc_states[] = {
"Quiesce"
};
/* Device States */
enum qlcnic_83xx_states {
QLC_83XX_IDC_DEV_UNKNOWN,
QLC_83XX_IDC_DEV_COLD,
QLC_83XX_IDC_DEV_INIT,
QLC_83XX_IDC_DEV_READY,
QLC_83XX_IDC_DEV_NEED_RESET,
QLC_83XX_IDC_DEV_NEED_QUISCENT,
QLC_83XX_IDC_DEV_FAILED,
QLC_83XX_IDC_DEV_QUISCENT
};
static int
qlcnic_83xx_idc_check_driver_presence_reg(struct qlcnic_adapter *adapter)
{
......@@ -162,7 +150,8 @@ static int qlcnic_83xx_idc_update_audit_reg(struct qlcnic_adapter *adapter,
return -EBUSY;
}
val = adapter->portnum & 0xf;
val = QLCRDX(adapter->ahw, QLC_83XX_IDC_DRV_AUDIT);
val |= (adapter->portnum & 0xf);
val |= mode << 7;
if (mode)
seconds = jiffies / HZ - adapter->ahw->idc.sec_counter;
......@@ -401,14 +390,18 @@ static void qlcnic_83xx_idc_detach_driver(struct qlcnic_adapter *adapter)
struct net_device *netdev = adapter->netdev;
netif_device_detach(netdev);
/* Disable mailbox interrupt */
QLCWRX(adapter->ahw, QLCNIC_MBX_INTR_ENBL, 0);
qlcnic_83xx_disable_mbx_intr(adapter);
qlcnic_down(adapter, netdev);
for (i = 0; i < adapter->ahw->num_msix; i++) {
adapter->ahw->intr_tbl[i].id = i;
adapter->ahw->intr_tbl[i].enabled = 0;
adapter->ahw->intr_tbl[i].src = 0;
}
if (qlcnic_sriov_pf_check(adapter))
qlcnic_sriov_pf_reset(adapter);
}
/**
......@@ -610,9 +603,15 @@ static int qlcnic_83xx_idc_check_fan_failure(struct qlcnic_adapter *adapter)
static int qlcnic_83xx_idc_reattach_driver(struct qlcnic_adapter *adapter)
{
int err;
/* register for NIC IDC AEN Events */
qlcnic_83xx_register_nic_idc_func(adapter, 1);
err = qlcnic_sriov_pf_reinit(adapter);
if (err)
return err;
qlcnic_83xx_enable_mbx_intrpt(adapter);
if (qlcnic_83xx_configure_opmode(adapter)) {
......
......@@ -669,7 +669,7 @@ enum {
#define QLCNIC_CMDPEG_CHECK_RETRY_COUNT 60
#define QLCNIC_CMDPEG_CHECK_DELAY 500
#define QLCNIC_HEARTBEAT_PERIOD_MSECS 200
#define QLCNIC_HEARTBEAT_CHECK_RETRY_COUNT 45
#define QLCNIC_HEARTBEAT_CHECK_RETRY_COUNT 10
#define QLCNIC_MAX_MC_COUNT 38
#define QLCNIC_WATCHDOG_TIMEOUTVALUE 5
......
......@@ -197,6 +197,8 @@ void qlcnic_sriov_pf_handle_flr(struct qlcnic_sriov *, struct qlcnic_vf_info *);
bool qlcnic_sriov_soft_flr_check(struct qlcnic_adapter *,
struct qlcnic_bc_trans *,
struct qlcnic_vf_info *);
void qlcnic_sriov_pf_reset(struct qlcnic_adapter *);
int qlcnic_sriov_pf_reinit(struct qlcnic_adapter *);
#else
static inline void qlcnic_sriov_pf_disable(struct qlcnic_adapter *adapter) {}
static inline void qlcnic_sriov_pf_cleanup(struct qlcnic_adapter *adapter) {}
......@@ -227,6 +229,9 @@ static inline bool qlcnic_sriov_soft_flr_check(struct qlcnic_adapter *adapter,
struct qlcnic_bc_trans *trans,
struct qlcnic_vf_info *vf)
{ return false; }
static inline void qlcnic_sriov_pf_reset(struct qlcnic_adapter *adapter) {}
static inline int qlcnic_sriov_pf_reinit(struct qlcnic_adapter *adapter)
{ return 0; }
#endif
#endif
......@@ -25,6 +25,11 @@
#define QLC_DEFAULT_RCV_DESCRIPTORS_SRIOV_VF 2048
#define QLC_DEFAULT_JUMBO_RCV_DESCRIPTORS_SRIOV_VF 512
#define QLC_83XX_VF_RESET_FAIL_THRESH 8
#define QLC_BC_CMD_MAX_RETRY_CNT 5
static void qlcnic_sriov_vf_poll_dev_state(struct work_struct *);
static void qlcnic_sriov_vf_cancel_fw_work(struct qlcnic_adapter *);
static void qlcnic_sriov_cleanup_transaction(struct qlcnic_bc_trans *);
static int qlcnic_sriov_vf_mbx_op(struct qlcnic_adapter *,
struct qlcnic_cmd_args *);
......@@ -64,7 +69,7 @@ static struct qlcnic_hardware_ops qlcnic_sriov_vf_hw_ops = {
static struct qlcnic_nic_template qlcnic_sriov_vf_ops = {
.config_bridged_mode = qlcnic_config_bridged_mode,
.config_led = qlcnic_config_led,
.cancel_idc_work = qlcnic_83xx_idc_exit,
.cancel_idc_work = qlcnic_sriov_vf_cancel_fw_work,
.napi_add = qlcnic_83xx_napi_add,
.napi_del = qlcnic_83xx_napi_del,
.config_ipaddr = qlcnic_83xx_config_ipaddr,
......@@ -442,6 +447,8 @@ static int qlcnic_sriov_setup_vf(struct qlcnic_adapter *adapter,
pci_set_drvdata(adapter->pdev, adapter);
dev_info(&adapter->pdev->dev, "%s: XGbE port initialized\n",
adapter->netdev->name);
qlcnic_schedule_work(adapter, qlcnic_sriov_vf_poll_dev_state,
adapter->ahw->idc.delay);
return 0;
err_out_send_channel_term:
......@@ -461,27 +468,47 @@ static int qlcnic_sriov_setup_vf(struct qlcnic_adapter *adapter,
return err;
}
static int qlcnic_sriov_check_dev_ready(struct qlcnic_adapter *adapter)
{
u32 state;
do {
msleep(20);
if (++adapter->fw_fail_cnt > QLC_BC_CMD_MAX_RETRY_CNT)
return -EIO;
state = QLCRDX(adapter->ahw, QLC_83XX_IDC_DEV_STATE);
} while (state != QLC_83XX_IDC_DEV_READY);
return 0;
}
int qlcnic_sriov_vf_init(struct qlcnic_adapter *adapter, int pci_using_dac)
{
struct qlcnic_hardware_context *ahw = adapter->ahw;
int err;
spin_lock_init(&ahw->mbx_lock);
set_bit(QLC_83XX_MBX_READY, &adapter->ahw->idc.status);
set_bit(QLC_83XX_MBX_READY, &ahw->idc.status);
set_bit(QLC_83XX_MODULE_LOADED, &ahw->idc.status);
ahw->idc.delay = QLC_83XX_IDC_FW_POLL_DELAY;
ahw->reset_context = 0;
adapter->fw_fail_cnt = 0;
ahw->msix_supported = 1;
adapter->need_fw_reset = 0;
adapter->flags |= QLCNIC_TX_INTR_SHARED;
if (qlcnic_sriov_setup_vf(adapter, pci_using_dac))
return -EIO;
err = qlcnic_sriov_check_dev_ready(adapter);
if (err)
return err;
err = qlcnic_sriov_setup_vf(adapter, pci_using_dac);
if (err)
return err;
if (qlcnic_read_mac_addr(adapter))
dev_warn(&adapter->pdev->dev, "failed to read mac addr\n");
set_bit(QLC_83XX_MODULE_LOADED, &adapter->ahw->idc.status);
adapter->ahw->idc.delay = QLC_83XX_IDC_FW_POLL_DELAY;
adapter->ahw->reset_context = 0;
adapter->fw_fail_cnt = 0;
clear_bit(__QLCNIC_RESETTING, &adapter->state);
adapter->need_fw_reset = 0;
return 0;
}
......@@ -689,7 +716,8 @@ static void qlcnic_sriov_schedule_bc_cmd(struct qlcnic_sriov *sriov,
struct qlcnic_vf_info *vf,
work_func_t func)
{
if (test_bit(QLC_BC_VF_FLR, &vf->state))
if (test_bit(QLC_BC_VF_FLR, &vf->state) ||
vf->adapter->need_fw_reset)
return;
INIT_WORK(&vf->trans_work, func);
......@@ -813,7 +841,8 @@ static int __qlcnic_sriov_send_bc_msg(struct qlcnic_bc_trans *trans,
int err = -EIO;
while (flag) {
if (test_bit(QLC_BC_VF_FLR, &vf->state))
if (test_bit(QLC_BC_VF_FLR, &vf->state) ||
vf->adapter->need_fw_reset)
trans->trans_state = QLC_ABORT;
switch (trans->trans_state) {
......@@ -897,6 +926,9 @@ static void qlcnic_sriov_process_bc_cmd(struct work_struct *work)
struct qlcnic_cmd_args cmd;
u8 req;
if (adapter->need_fw_reset)
return;
if (test_bit(QLC_BC_VF_FLR, &vf->state))
return;
......@@ -1036,6 +1068,9 @@ static void qlcnic_sriov_handle_bc_cmd(struct qlcnic_sriov *sriov,
int err;
u8 cmd_op;
if (adapter->need_fw_reset)
return;
if (!test_bit(QLC_BC_VF_STATE, &vf->state) &&
hdr->op_type != QLC_BC_CMD &&
hdr->cmd_op != QLCNIC_BC_CMD_CHANNEL_INIT)
......@@ -1183,33 +1218,66 @@ int qlcnic_sriov_cfg_bc_intr(struct qlcnic_adapter *adapter, u8 enable)
return err;
}
static int qlcnic_sriov_retry_bc_cmd(struct qlcnic_adapter *adapter,
struct qlcnic_bc_trans *trans)
{
u8 max = QLC_BC_CMD_MAX_RETRY_CNT;
u32 state;
state = QLCRDX(adapter->ahw, QLC_83XX_IDC_DEV_STATE);
if (state == QLC_83XX_IDC_DEV_READY) {
msleep(20);
clear_bit(QLC_BC_VF_CHANNEL, &trans->vf->state);
trans->trans_state = QLC_INIT;
if (++adapter->fw_fail_cnt > max)
return -EIO;
else
return 0;
}
return -EIO;
}
static int qlcnic_sriov_vf_mbx_op(struct qlcnic_adapter *adapter,
struct qlcnic_cmd_args *cmd)
{
struct qlcnic_hardware_context *ahw = adapter->ahw;
struct device *dev = &adapter->pdev->dev;
struct qlcnic_bc_trans *trans;
int err;
u32 rsp_data, opcode, mbx_err_code, rsp;
u16 seq = ++adapter->ahw->sriov->bc.trans_counter;
u8 func = ahw->pci_func;
if (qlcnic_sriov_alloc_bc_trans(&trans))
return -ENOMEM;
rsp = qlcnic_sriov_alloc_bc_trans(&trans);
if (rsp)
return rsp;
if (qlcnic_sriov_prepare_bc_hdr(trans, cmd, seq, QLC_BC_COMMAND))
return -ENOMEM;
rsp = qlcnic_sriov_prepare_bc_hdr(trans, cmd, seq, QLC_BC_COMMAND);
if (rsp)
goto cleanup_transaction;
retry:
if (!test_bit(QLC_83XX_MBX_READY, &adapter->ahw->idc.status)) {
rsp = -EIO;
QLCDB(adapter, DRV, "MBX not Ready!(cmd 0x%x) for VF 0x%x\n",
QLCNIC_MBX_RSP(cmd->req.arg[0]), adapter->ahw->pci_func);
QLCNIC_MBX_RSP(cmd->req.arg[0]), func);
goto err_out;
}
err = qlcnic_sriov_send_bc_cmd(adapter, trans, adapter->ahw->pci_func);
err = qlcnic_sriov_send_bc_cmd(adapter, trans, func);
if (err) {
dev_err(&adapter->pdev->dev,
"MBX command 0x%x timed out for VF %d\n",
(cmd->req.arg[0] & 0xffff), adapter->ahw->pci_func);
dev_err(dev, "MBX command 0x%x timed out for VF %d\n",
(cmd->req.arg[0] & 0xffff), func);
rsp = QLCNIC_RCODE_TIMEOUT;
/* After adapter reset PF driver may take some time to
* respond to VF's request. Retry request till maximum retries.
*/
if ((trans->req_hdr->cmd_op == QLCNIC_BC_CMD_CHANNEL_INIT) &&
!qlcnic_sriov_retry_bc_cmd(adapter, trans))
goto retry;
goto err_out;
}
......@@ -1224,12 +1292,19 @@ static int qlcnic_sriov_vf_mbx_op(struct qlcnic_adapter *adapter,
rsp = mbx_err_code;
if (!rsp)
rsp = 1;
dev_err(&adapter->pdev->dev,
dev_err(dev,
"MBX command 0x%x failed with err:0x%x for VF %d\n",
opcode, mbx_err_code, adapter->ahw->pci_func);
opcode, mbx_err_code, func);
}
err_out:
if (rsp == QLCNIC_RCODE_TIMEOUT) {
ahw->reset_context = 1;
adapter->need_fw_reset = 1;
clear_bit(QLC_83XX_MBX_READY, &ahw->idc.status);
}
cleanup_transaction:
qlcnic_sriov_cleanup_transaction(trans);
return rsp;
}
......@@ -1372,6 +1447,271 @@ void qlcnic_sriov_vf_schedule_multi(struct net_device *netdev)
struct qlcnic_adapter *adapter = netdev_priv(netdev);
struct qlcnic_back_channel *bc = &adapter->ahw->sriov->bc;
if (adapter->need_fw_reset)
return;
qlcnic_sriov_schedule_bc_async_work(bc, qlcnic_sriov_handle_async_multi,
netdev);
}
static int qlcnic_sriov_vf_reinit_driver(struct qlcnic_adapter *adapter)
{
int err;
set_bit(QLC_83XX_MBX_READY, &adapter->ahw->idc.status);
qlcnic_83xx_enable_mbx_intrpt(adapter);
err = qlcnic_sriov_cfg_bc_intr(adapter, 1);
if (err)
return err;
err = qlcnic_sriov_channel_cfg_cmd(adapter, QLCNIC_BC_CMD_CHANNEL_INIT);
if (err)
goto err_out_cleanup_bc_intr;
err = qlcnic_sriov_vf_init_driver(adapter);
if (err)
goto err_out_term_channel;
return 0;
err_out_term_channel:
qlcnic_sriov_channel_cfg_cmd(adapter, QLCNIC_BC_CMD_CHANNEL_TERM);
err_out_cleanup_bc_intr:
qlcnic_sriov_cfg_bc_intr(adapter, 0);
return err;
}
static void qlcnic_sriov_vf_attach(struct qlcnic_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
if (netif_running(netdev)) {
if (!qlcnic_up(adapter, netdev))
qlcnic_restore_indev_addr(netdev, NETDEV_UP);
}
netif_device_attach(netdev);
}
static void qlcnic_sriov_vf_detach(struct qlcnic_adapter *adapter)
{
struct qlcnic_hardware_context *ahw = adapter->ahw;
struct qlcnic_intrpt_config *intr_tbl = ahw->intr_tbl;
struct net_device *netdev = adapter->netdev;
u8 i, max_ints = ahw->num_msix - 1;
qlcnic_83xx_disable_mbx_intr(adapter);
netif_device_detach(netdev);
if (netif_running(netdev))
qlcnic_down(adapter, netdev);
for (i = 0; i < max_ints; i++) {
intr_tbl[i].id = i;
intr_tbl[i].enabled = 0;
intr_tbl[i].src = 0;
}
ahw->reset_context = 0;
}
static int qlcnic_sriov_vf_handle_dev_ready(struct qlcnic_adapter *adapter)
{
struct qlcnic_hardware_context *ahw = adapter->ahw;
struct device *dev = &adapter->pdev->dev;
struct qlc_83xx_idc *idc = &ahw->idc;
u8 func = ahw->pci_func;
u32 state;
if ((idc->prev_state == QLC_83XX_IDC_DEV_NEED_RESET) ||
(idc->prev_state == QLC_83XX_IDC_DEV_INIT)) {
if (!qlcnic_sriov_vf_reinit_driver(adapter)) {
qlcnic_sriov_vf_attach(adapter);
adapter->fw_fail_cnt = 0;
dev_info(dev,
"%s: Reinitalization of VF 0x%x done after FW reset\n",
__func__, func);
} else {
dev_err(dev,
"%s: Reinitialization of VF 0x%x failed after FW reset\n",
__func__, func);
state = QLCRDX(ahw, QLC_83XX_IDC_DEV_STATE);
dev_info(dev, "Current state 0x%x after FW reset\n",
state);
}
}
return 0;
}
static int qlcnic_sriov_vf_handle_context_reset(struct qlcnic_adapter *adapter)
{
struct qlcnic_hardware_context *ahw = adapter->ahw;
struct device *dev = &adapter->pdev->dev;
struct qlc_83xx_idc *idc = &ahw->idc;
u8 func = ahw->pci_func;
u32 state;
adapter->reset_ctx_cnt++;
/* Skip the context reset and check if FW is hung */
if (adapter->reset_ctx_cnt < 3) {
adapter->need_fw_reset = 1;
clear_bit(QLC_83XX_MBX_READY, &idc->status);
dev_info(dev,
"Resetting context, wait here to check if FW is in failed state\n");
return 0;
}
/* Check if number of resets exceed the threshold.
* If it exceeds the threshold just fail the VF.
*/
if (adapter->reset_ctx_cnt > QLC_83XX_VF_RESET_FAIL_THRESH) {
clear_bit(QLC_83XX_MODULE_LOADED, &idc->status);
adapter->tx_timeo_cnt = 0;
adapter->fw_fail_cnt = 0;
adapter->reset_ctx_cnt = 0;
qlcnic_sriov_vf_detach(adapter);
dev_err(dev,
"Device context resets have exceeded the threshold, device interface will be shutdown\n");
return -EIO;
}
dev_info(dev, "Resetting context of VF 0x%x\n", func);
dev_info(dev, "%s: Context reset count %d for VF 0x%x\n",
__func__, adapter->reset_ctx_cnt, func);
set_bit(__QLCNIC_RESETTING, &adapter->state);
adapter->need_fw_reset = 1;
clear_bit(QLC_83XX_MBX_READY, &idc->status);
qlcnic_sriov_vf_detach(adapter);
adapter->need_fw_reset = 0;
if (!qlcnic_sriov_vf_reinit_driver(adapter)) {
qlcnic_sriov_vf_attach(adapter);
adapter->netdev->trans_start = jiffies;
adapter->tx_timeo_cnt = 0;
adapter->reset_ctx_cnt = 0;
adapter->fw_fail_cnt = 0;
dev_info(dev, "Done resetting context for VF 0x%x\n", func);
} else {
dev_err(dev, "%s: Reinitialization of VF 0x%x failed\n",
__func__, func);
state = QLCRDX(ahw, QLC_83XX_IDC_DEV_STATE);
dev_info(dev, "%s: Current state 0x%x\n", __func__, state);
}
return 0;
}
static int qlcnic_sriov_vf_idc_ready_state(struct qlcnic_adapter *adapter)
{
struct qlcnic_hardware_context *ahw = adapter->ahw;
int ret = 0;
if (ahw->idc.prev_state != QLC_83XX_IDC_DEV_READY)
ret = qlcnic_sriov_vf_handle_dev_ready(adapter);
else if (ahw->reset_context)
ret = qlcnic_sriov_vf_handle_context_reset(adapter);
clear_bit(__QLCNIC_RESETTING, &adapter->state);
return ret;
}
static int qlcnic_sriov_vf_idc_failed_state(struct qlcnic_adapter *adapter)
{
struct qlc_83xx_idc *idc = &adapter->ahw->idc;
dev_err(&adapter->pdev->dev, "Device is in failed state\n");
if (idc->prev_state == QLC_83XX_IDC_DEV_READY)
qlcnic_sriov_vf_detach(adapter);
clear_bit(QLC_83XX_MODULE_LOADED, &idc->status);
clear_bit(__QLCNIC_RESETTING, &adapter->state);
return -EIO;
}
static int
qlcnic_sriov_vf_idc_need_quiescent_state(struct qlcnic_adapter *adapter)
{
struct qlc_83xx_idc *idc = &adapter->ahw->idc;
dev_info(&adapter->pdev->dev, "Device is in quiescent state\n");
if (idc->prev_state == QLC_83XX_IDC_DEV_READY) {
set_bit(__QLCNIC_RESETTING, &adapter->state);
adapter->tx_timeo_cnt = 0;
adapter->reset_ctx_cnt = 0;
clear_bit(QLC_83XX_MBX_READY, &idc->status);
qlcnic_sriov_vf_detach(adapter);
}
return 0;
}
static int qlcnic_sriov_vf_idc_init_reset_state(struct qlcnic_adapter *adapter)
{
struct qlc_83xx_idc *idc = &adapter->ahw->idc;
u8 func = adapter->ahw->pci_func;
if (idc->prev_state == QLC_83XX_IDC_DEV_READY) {
dev_err(&adapter->pdev->dev,
"Firmware hang detected by VF 0x%x\n", func);
set_bit(__QLCNIC_RESETTING, &adapter->state);
adapter->tx_timeo_cnt = 0;
adapter->reset_ctx_cnt = 0;
clear_bit(QLC_83XX_MBX_READY, &idc->status);
qlcnic_sriov_vf_detach(adapter);
}
return 0;
}
static int qlcnic_sriov_vf_idc_unknown_state(struct qlcnic_adapter *adapter)
{
dev_err(&adapter->pdev->dev, "%s: Device in unknown state\n", __func__);
return 0;
}
static void qlcnic_sriov_vf_poll_dev_state(struct work_struct *work)
{
struct qlcnic_adapter *adapter;
struct qlc_83xx_idc *idc;
int ret = 0;
adapter = container_of(work, struct qlcnic_adapter, fw_work.work);
idc = &adapter->ahw->idc;
idc->curr_state = QLCRDX(adapter->ahw, QLC_83XX_IDC_DEV_STATE);
switch (idc->curr_state) {
case QLC_83XX_IDC_DEV_READY:
ret = qlcnic_sriov_vf_idc_ready_state(adapter);
break;
case QLC_83XX_IDC_DEV_NEED_RESET:
case QLC_83XX_IDC_DEV_INIT:
ret = qlcnic_sriov_vf_idc_init_reset_state(adapter);
break;
case QLC_83XX_IDC_DEV_NEED_QUISCENT:
ret = qlcnic_sriov_vf_idc_need_quiescent_state(adapter);
break;
case QLC_83XX_IDC_DEV_FAILED:
ret = qlcnic_sriov_vf_idc_failed_state(adapter);
break;
case QLC_83XX_IDC_DEV_QUISCENT:
break;
default:
ret = qlcnic_sriov_vf_idc_unknown_state(adapter);
}
idc->prev_state = idc->curr_state;
if (!ret && test_bit(QLC_83XX_MODULE_LOADED, &idc->status))
qlcnic_schedule_work(adapter, qlcnic_sriov_vf_poll_dev_state,
idc->delay);
}
static void qlcnic_sriov_vf_cancel_fw_work(struct qlcnic_adapter *adapter)
{
while (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state))
msleep(20);
clear_bit(QLC_83XX_MODULE_LOADED, &adapter->ahw->idc.status);
clear_bit(__QLCNIC_RESETTING, &adapter->state);
cancel_delayed_work_sync(&adapter->fw_work);
}
......@@ -1376,3 +1376,43 @@ void qlcnic_sriov_pf_handle_flr(struct qlcnic_sriov *sriov,
qlcnic_sriov_schedule_flr(sriov, vf, qlcnic_sriov_pf_process_flr);
netdev_info(dev, "FLR received for PCI func %d\n", vf->pci_func);
}
void qlcnic_sriov_pf_reset(struct qlcnic_adapter *adapter)
{
struct qlcnic_hardware_context *ahw = adapter->ahw;
struct qlcnic_sriov *sriov = ahw->sriov;
struct qlcnic_vf_info *vf;
u16 num_vfs = sriov->num_vfs;
int i;
for (i = 0; i < num_vfs; i++) {
vf = &sriov->vf_info[i];
vf->rx_ctx_id = 0;
vf->tx_ctx_id = 0;
cancel_work_sync(&vf->flr_work);
__qlcnic_sriov_process_flr(vf);
clear_bit(QLC_BC_VF_STATE, &vf->state);
}
qlcnic_sriov_pf_reset_vport_handle(adapter, ahw->pci_func);
QLCWRX(ahw, QLCNIC_MBX_INTR_ENBL, (ahw->num_msix - 1) << 8);
}
int qlcnic_sriov_pf_reinit(struct qlcnic_adapter *adapter)
{
struct qlcnic_hardware_context *ahw = adapter->ahw;
int err;
if (!qlcnic_sriov_enable_check(adapter))
return 0;
ahw->op_mode = QLCNIC_SRIOV_PF_FUNC;
err = qlcnic_sriov_pf_init(adapter);
if (err)
return err;
dev_info(&adapter->pdev->dev, "%s: op_mode %d\n",
__func__, ahw->op_mode);
return err;
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册