提交 eef445ee 编写于 作者: L Linus Torvalds

Merge tag 'pm+acpi-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management fixes from Rafael Wysocki:
 "These include a fix for a recent intel_pstate regression, a fix for a
  regression in the ACPI-based PCI hotplug (ACPIPHP) code introduced
  during the 3.12 cycle, fixes for two bugs in the ACPI core introduced
  recently and a MAINTAINERS update related to cpufreq.

  Specifics:

   - Fix for a recent regression in the intel_pstate driver that
     introduced a race condition causing systems to crash during
     initialization in some situations.  This removes the affected code
     altogether.  From Dirk Brandewie.

   - ACPIPHP fix for a regression introduced during the 3.12 cycle
     causing devices to be dropped as a result of bus check
     notifications after system resume on some systems due to the way
     ACPIPHP interprets _STA return values (arguably incorrectly).  From
     Mika Westerberg.

   - ACPI dock driver fix for a problem causing docking to fail due to a
     check that always fails after recent ACPI core changes (found by
     code inspection).

   - ACPI container driver fix to prevent memory from being leaked in an
     error code path after device_register() failures.

   - Update of the arm_big_little cpufreq driver maintainer's e-mail
     address"

* tag 'pm+acpi-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  MAINTAINERS / cpufreq: update Sudeep's email address
  intel_pstate: Remove energy reporting from pstate_sample tracepoint
  ACPI / container: Fix error code path in container_device_attach()
  ACPI / hotplug / PCI: Relax the checking of _STA return values
  ACPI / dock: Use acpi_device_enumerated() to check if dock is present
......@@ -2367,7 +2367,7 @@ F: include/linux/cpufreq.h
CPU FREQUENCY DRIVERS - ARM BIG LITTLE
M: Viresh Kumar <viresh.kumar@linaro.org>
M: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
M: Sudeep Holla <sudeep.holla@arm.com>
L: cpufreq@vger.kernel.org
L: linux-pm@vger.kernel.org
W: http://www.arm.com/products/processors/technologies/biglittleprocessing.php
......
......@@ -79,9 +79,10 @@ static int container_device_attach(struct acpi_device *adev,
ACPI_COMPANION_SET(dev, adev);
dev->release = acpi_container_release;
ret = device_register(dev);
if (ret)
if (ret) {
put_device(dev);
return ret;
}
adev->driver_data = dev;
return 1;
}
......
......@@ -609,7 +609,7 @@ static int handle_eject_request(struct dock_station *ds, u32 event)
static void dock_notify(struct dock_station *ds, u32 event)
{
acpi_handle handle = ds->handle;
struct acpi_device *ad;
struct acpi_device *adev = NULL;
int surprise_removal = 0;
/*
......@@ -632,7 +632,8 @@ static void dock_notify(struct dock_station *ds, u32 event)
switch (event) {
case ACPI_NOTIFY_BUS_CHECK:
case ACPI_NOTIFY_DEVICE_CHECK:
if (!dock_in_progress(ds) && acpi_bus_get_device(handle, &ad)) {
acpi_bus_get_device(handle, &adev);
if (!dock_in_progress(ds) && !acpi_device_enumerated(adev)) {
begin_dock(ds);
dock(ds);
if (!dock_present(ds)) {
......
......@@ -51,8 +51,6 @@ static inline int32_t div_fp(int32_t x, int32_t y)
return div_s64((int64_t)x << FRAC_BITS, (int64_t)y);
}
static u64 energy_divisor;
struct sample {
int32_t core_pct_busy;
u64 aperf;
......@@ -630,12 +628,10 @@ static void intel_pstate_timer_func(unsigned long __data)
{
struct cpudata *cpu = (struct cpudata *) __data;
struct sample *sample;
u64 energy;
intel_pstate_sample(cpu);
sample = &cpu->samples[cpu->sample_ptr];
rdmsrl(MSR_PKG_ENERGY_STATUS, energy);
intel_pstate_adjust_busy_pstate(cpu);
......@@ -644,7 +640,6 @@ static void intel_pstate_timer_func(unsigned long __data)
cpu->pstate.current_pstate,
sample->mperf,
sample->aperf,
div64_u64(energy, energy_divisor),
sample->freq);
intel_pstate_set_sample_time(cpu);
......@@ -926,7 +921,6 @@ static int __init intel_pstate_init(void)
int cpu, rc = 0;
const struct x86_cpu_id *id;
struct cpu_defaults *cpu_info;
u64 units;
if (no_load)
return -ENODEV;
......@@ -960,9 +954,6 @@ static int __init intel_pstate_init(void)
if (rc)
goto out;
rdmsrl(MSR_RAPL_POWER_UNIT, units);
energy_divisor = 1 << ((units >> 8) & 0x1f); /* bits{12:8} */
intel_pstate_debug_expose_params();
intel_pstate_sysfs_expose_params();
......
......@@ -730,6 +730,17 @@ static unsigned int get_slot_status(struct acpiphp_slot *slot)
return (unsigned int)sta;
}
static inline bool device_status_valid(unsigned int sta)
{
/*
* ACPI spec says that _STA may return bit 0 clear with bit 3 set
* if the device is valid but does not require a device driver to be
* loaded (Section 6.3.7 of ACPI 5.0A).
*/
unsigned int mask = ACPI_STA_DEVICE_ENABLED | ACPI_STA_DEVICE_FUNCTIONING;
return (sta & mask) == mask;
}
/**
* trim_stale_devices - remove PCI devices that are not responding.
* @dev: PCI device to start walking the hierarchy from.
......@@ -745,7 +756,7 @@ static void trim_stale_devices(struct pci_dev *dev)
unsigned long long sta;
status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
alive = (ACPI_SUCCESS(status) && sta == ACPI_STA_ALL)
alive = (ACPI_SUCCESS(status) && device_status_valid(sta))
|| acpiphp_no_hotplug(handle);
}
if (!alive) {
......@@ -792,7 +803,7 @@ static void acpiphp_check_bridge(struct acpiphp_bridge *bridge)
mutex_lock(&slot->crit_sect);
if (slot_no_hotplug(slot)) {
; /* do nothing */
} else if (get_slot_status(slot) == ACPI_STA_ALL) {
} else if (device_status_valid(get_slot_status(slot))) {
/* remove stale devices if any */
list_for_each_entry_safe_reverse(dev, tmp,
&bus->devices, bus_list)
......
......@@ -42,7 +42,6 @@ TRACE_EVENT(pstate_sample,
u32 state,
u64 mperf,
u64 aperf,
u32 energy,
u32 freq
),
......@@ -51,7 +50,6 @@ TRACE_EVENT(pstate_sample,
state,
mperf,
aperf,
energy,
freq
),
......@@ -61,7 +59,6 @@ TRACE_EVENT(pstate_sample,
__field(u32, state)
__field(u64, mperf)
__field(u64, aperf)
__field(u32, energy)
__field(u32, freq)
),
......@@ -72,17 +69,15 @@ TRACE_EVENT(pstate_sample,
__entry->state = state;
__entry->mperf = mperf;
__entry->aperf = aperf;
__entry->energy = energy;
__entry->freq = freq;
),
TP_printk("core_busy=%lu scaled=%lu state=%lu mperf=%llu aperf=%llu energy=%lu freq=%lu ",
TP_printk("core_busy=%lu scaled=%lu state=%lu mperf=%llu aperf=%llu freq=%lu ",
(unsigned long)__entry->core_busy,
(unsigned long)__entry->scaled_busy,
(unsigned long)__entry->state,
(unsigned long long)__entry->mperf,
(unsigned long long)__entry->aperf,
(unsigned long)__entry->energy,
(unsigned long)__entry->freq
)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册