提交 ecc6cd73 编写于 作者: D David Gibson 提交者: Josh Boyer

[POWERPC] Start removing linux,network-index in favour of aliases

This patch alters the bootwrapper for a number of machines (roubhly
all 4xx based cuboot or treeboot platforms) to use aliases instead of
the linux,network-index hack to work out which MAC address to attach
to which ethernet device node.

The now obsolete linux,network-index properties are removed from the
corresponding device trees.  This won't break backwards compatiblity,
because in cases where this fixup code is relevant, the device tree is
part of the kernel image.

The references to linux,network-index are removed from
booting-without-of.txt.  Not only is it now deprecated, but as a hack
applicable only when the device tree blob and fixup code were in the
same image, this property never belonged in booting-without-of.txt
which describes the interface between the kernel and firmware or
bootloaders which produce a device tree.  By the time the device tree
reaches the kernel, all the MAC addresses must be fully filled in.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
上级 54f53f2b
...@@ -1269,10 +1269,6 @@ platforms are moved over to use the flattened-device-tree model. ...@@ -1269,10 +1269,6 @@ platforms are moved over to use the flattened-device-tree model.
Recommended properties: Recommended properties:
- linux,network-index : This is the intended "index" of this
network device. This is used by the bootwrapper to interpret
MAC addresses passed by the firmware when no information other
than indices is available to associate an address with a device.
- phy-connection-type : a string naming the controller/PHY interface type, - phy-connection-type : a string naming the controller/PHY interface type,
i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id", "sgmii", i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id", "sgmii",
"tbi", or "rtbi". This property is only really needed if the connection "tbi", or "rtbi". This property is only really needed if the connection
...@@ -1667,10 +1663,6 @@ platforms are moved over to use the flattened-device-tree model. ...@@ -1667,10 +1663,6 @@ platforms are moved over to use the flattened-device-tree model.
- phy-handle : The phandle for the PHY connected to this controller. - phy-handle : The phandle for the PHY connected to this controller.
Recommended properties: Recommended properties:
- linux,network-index : This is the intended "index" of this
network device. This is used by the bootwrapper to interpret
MAC addresses passed by the firmware when no information other
than indices is available to associate an address with a device.
- phy-connection-type : a string naming the controller/PHY interface type, - phy-connection-type : a string naming the controller/PHY interface type,
i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id" (Internal i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id" (Internal
Delay), "rgmii-txid" (delay on TX only), "rgmii-rxid" (delay on RX only), Delay), "rgmii-txid" (delay on TX only), "rgmii-rxid" (delay on RX only),
...@@ -1995,7 +1987,6 @@ platforms are moved over to use the flattened-device-tree model. ...@@ -1995,7 +1987,6 @@ platforms are moved over to use the flattened-device-tree model.
interrupts = <20 8>; interrupts = <20 8>;
interrupt-parent = <&PIC>; interrupt-parent = <&PIC>;
phy-handle = <&PHY0>; phy-handle = <&PHY0>;
linux,network-index = <0>;
fsl,cpm-command = <12000300>; fsl,cpm-command = <12000300>;
}; };
...@@ -2217,12 +2208,6 @@ platforms are moved over to use the flattened-device-tree model. ...@@ -2217,12 +2208,6 @@ platforms are moved over to use the flattened-device-tree model.
EMAC, that is the content of the current (bogus) "phy-port" EMAC, that is the content of the current (bogus) "phy-port"
property. property.
Recommended properties:
- linux,network-index : This is the intended "index" of this
network device. This is used by the bootwrapper to interpret
MAC addresses passed by the firmware when no information other
than indices is available to associate an address with a device.
Optional properties: Optional properties:
- phy-address : 1 cell, optional, MDIO address of the PHY. If absent, - phy-address : 1 cell, optional, MDIO address of the PHY. If absent,
a search is performed. a search is performed.
...@@ -2246,7 +2231,6 @@ platforms are moved over to use the flattened-device-tree model. ...@@ -2246,7 +2231,6 @@ platforms are moved over to use the flattened-device-tree model.
Example: Example:
EMAC0: ethernet@40000800 { EMAC0: ethernet@40000800 {
linux,network-index = <0>;
device_type = "network"; device_type = "network";
compatible = "ibm,emac-440gp", "ibm,emac"; compatible = "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>; interrupt-parent = <&UIC1>;
......
...@@ -33,7 +33,8 @@ static void bamboo_fixups(void) ...@@ -33,7 +33,8 @@ static void bamboo_fixups(void)
ibm440ep_fixup_clocks(sysclk, 11059200, 25000000); ibm440ep_fixup_clocks(sysclk, 11059200, 25000000);
ibm4xx_sdram_fixup_memsize(); ibm4xx_sdram_fixup_memsize();
ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00); ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00);
dt_fixup_mac_addresses(bamboo_mac0, bamboo_mac1); dt_fixup_mac_address_by_alias("ethernet0", bamboo_mac0);
dt_fixup_mac_address_by_alias("ethernet1", bamboo_mac1);
} }
void bamboo_init(void *mac0, void *mac1) void bamboo_init(void *mac0, void *mac1)
......
...@@ -42,7 +42,8 @@ static void rainier_fixups(void) ...@@ -42,7 +42,8 @@ static void rainier_fixups(void)
ibm440ep_fixup_clocks(sysclk, 11059200, 50000000); ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
ibm4xx_denali_fixup_memsize(); ibm4xx_denali_fixup_memsize();
dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr); dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
} }
void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
......
...@@ -42,7 +42,8 @@ static void sequoia_fixups(void) ...@@ -42,7 +42,8 @@ static void sequoia_fixups(void)
ibm440ep_fixup_clocks(sysclk, 11059200, 50000000); ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
ibm4xx_denali_fixup_memsize(); ibm4xx_denali_fixup_memsize();
dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr); dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
} }
void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
......
...@@ -40,7 +40,8 @@ static void taishan_fixups(void) ...@@ -40,7 +40,8 @@ static void taishan_fixups(void)
ibm4xx_sdram_fixup_memsize(); ibm4xx_sdram_fixup_memsize();
dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr); dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
} }
......
...@@ -24,7 +24,7 @@ static void warp_fixups(void) ...@@ -24,7 +24,7 @@ static void warp_fixups(void)
ibm440ep_fixup_clocks(sysclk, 11059200, 50000000); ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
ibm4xx_sdram_fixup_memsize(); ibm4xx_sdram_fixup_memsize();
ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
dt_fixup_mac_addresses(&bd.bi_enetaddr); dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
} }
......
...@@ -204,7 +204,6 @@ ...@@ -204,7 +204,6 @@
}; };
EMAC0: ethernet@ef600e00 { EMAC0: ethernet@ef600e00 {
linux,network-index = <0>;
device_type = "network"; device_type = "network";
compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>; interrupt-parent = <&UIC1>;
...@@ -225,7 +224,6 @@ ...@@ -225,7 +224,6 @@
}; };
EMAC1: ethernet@ef600f00 { EMAC1: ethernet@ef600f00 {
linux,network-index = <1>;
device_type = "network"; device_type = "network";
compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>; interrupt-parent = <&UIC1>;
......
...@@ -241,7 +241,6 @@ ...@@ -241,7 +241,6 @@
}; };
EMAC0: ethernet@40000800 { EMAC0: ethernet@40000800 {
linux,network-index = <0>;
device_type = "network"; device_type = "network";
compatible = "ibm,emac-440gp", "ibm,emac"; compatible = "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>; interrupt-parent = <&UIC1>;
...@@ -261,7 +260,6 @@ ...@@ -261,7 +260,6 @@
zmii-channel = <0>; zmii-channel = <0>;
}; };
EMAC1: ethernet@40000900 { EMAC1: ethernet@40000900 {
linux,network-index = <1>;
device_type = "network"; device_type = "network";
compatible = "ibm,emac-440gp", "ibm,emac"; compatible = "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>; interrupt-parent = <&UIC1>;
......
...@@ -254,7 +254,6 @@ ...@@ -254,7 +254,6 @@
}; };
EMAC0: ethernet@ef600e00 { EMAC0: ethernet@ef600e00 {
linux,network-index = <0>;
device_type = "network"; device_type = "network";
compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4"; compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
interrupt-parent = <&EMAC0>; interrupt-parent = <&EMAC0>;
...@@ -284,7 +283,6 @@ ...@@ -284,7 +283,6 @@
}; };
EMAC1: ethernet@ef600f00 { EMAC1: ethernet@ef600f00 {
linux,network-index = <1>;
device_type = "network"; device_type = "network";
compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4"; compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
interrupt-parent = <&EMAC1>; interrupt-parent = <&EMAC1>;
......
...@@ -269,7 +269,6 @@ ...@@ -269,7 +269,6 @@
}; };
EMAC0: ethernet@ef600e00 { EMAC0: ethernet@ef600e00 {
linux,network-index = <0>;
device_type = "network"; device_type = "network";
compatible = "ibm,emac-440epx", "ibm,emac4"; compatible = "ibm,emac-440epx", "ibm,emac4";
interrupt-parent = <&EMAC0>; interrupt-parent = <&EMAC0>;
...@@ -299,7 +298,6 @@ ...@@ -299,7 +298,6 @@
}; };
EMAC1: ethernet@ef600f00 { EMAC1: ethernet@ef600f00 {
linux,network-index = <1>;
device_type = "network"; device_type = "network";
compatible = "ibm,emac-440epx", "ibm,emac4"; compatible = "ibm,emac-440epx", "ibm,emac4";
interrupt-parent = <&EMAC1>; interrupt-parent = <&EMAC1>;
......
...@@ -235,7 +235,6 @@ ...@@ -235,7 +235,6 @@
EMAC0: ethernet@40000800 { EMAC0: ethernet@40000800 {
unused = <1>; unused = <1>;
linux,network-index = <2>;
device_type = "network"; device_type = "network";
compatible = "ibm,emac-440gx", "ibm,emac4"; compatible = "ibm,emac-440gx", "ibm,emac4";
interrupt-parent = <&UIC1>; interrupt-parent = <&UIC1>;
...@@ -256,7 +255,6 @@ ...@@ -256,7 +255,6 @@
}; };
EMAC1: ethernet@40000900 { EMAC1: ethernet@40000900 {
unused = <1>; unused = <1>;
linux,network-index = <3>;
device_type = "network"; device_type = "network";
compatible = "ibm,emac-440gx", "ibm,emac4"; compatible = "ibm,emac-440gx", "ibm,emac4";
interrupt-parent = <&UIC1>; interrupt-parent = <&UIC1>;
...@@ -277,7 +275,6 @@ ...@@ -277,7 +275,6 @@
}; };
EMAC2: ethernet@40000c00 { EMAC2: ethernet@40000c00 {
linux,network-index = <0>;
device_type = "network"; device_type = "network";
compatible = "ibm,emac-440gx", "ibm,emac4"; compatible = "ibm,emac-440gx", "ibm,emac4";
interrupt-parent = <&UIC2>; interrupt-parent = <&UIC2>;
...@@ -300,7 +297,6 @@ ...@@ -300,7 +297,6 @@
}; };
EMAC3: ethernet@40000e00 { EMAC3: ethernet@40000e00 {
linux,network-index = <1>;
device_type = "network"; device_type = "network";
compatible = "ibm,emac-440gx", "ibm,emac4"; compatible = "ibm,emac-440gx", "ibm,emac4";
interrupt-parent = <&UIC2>; interrupt-parent = <&UIC2>;
......
...@@ -125,7 +125,6 @@ ...@@ -125,7 +125,6 @@
}; };
EMAC: ethernet@ef600800 { EMAC: ethernet@ef600800 {
linux,network-index = <0>;
device_type = "network"; device_type = "network";
compatible = "ibm,emac-405gp", "ibm,emac"; compatible = "ibm,emac-405gp", "ibm,emac";
interrupt-parent = <&UIC0>; interrupt-parent = <&UIC0>;
......
...@@ -204,7 +204,6 @@ ...@@ -204,7 +204,6 @@
}; };
EMAC0: ethernet@ef600e00 { EMAC0: ethernet@ef600e00 {
linux,network-index = <0>;
device_type = "network"; device_type = "network";
compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>; interrupt-parent = <&UIC1>;
......
...@@ -75,7 +75,8 @@ static void ebony_fixups(void) ...@@ -75,7 +75,8 @@ static void ebony_fixups(void)
ibm440gp_fixup_clocks(sysclk, 6 * 1843200); ibm440gp_fixup_clocks(sysclk, 6 * 1843200);
ibm4xx_sdram_fixup_memsize(); ibm4xx_sdram_fixup_memsize();
dt_fixup_mac_addresses(ebony_mac0, ebony_mac1); dt_fixup_mac_address_by_alias("ethernet0", ebony_mac0);
dt_fixup_mac_address_by_alias("ethernet1", ebony_mac1);
ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
ebony_flashsel_fixup(); ebony_flashsel_fixup();
} }
......
...@@ -68,7 +68,7 @@ static void walnut_fixups(void) ...@@ -68,7 +68,7 @@ static void walnut_fixups(void)
ibm4xx_quiesce_eth((u32 *)0xef600800, NULL); ibm4xx_quiesce_eth((u32 *)0xef600800, NULL);
ibm4xx_fixup_ebc_ranges("/plb/ebc"); ibm4xx_fixup_ebc_ranges("/plb/ebc");
walnut_flashsel_fixup(); walnut_flashsel_fixup();
dt_fixup_mac_addresses((u8 *) WALNUT_OPENBIOS_MAC_OFF); dt_fixup_mac_address_by_alias("ethernet0", (u8 *) WALNUT_OPENBIOS_MAC_OFF);
} }
void platform_init(void) void platform_init(void)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册