提交 ead73183 编写于 作者: S Sascha Hauer 提交者: David S. Miller

FEC: Turn FEC driver into platform device driver

This turns the fec driver into a platform device driver for new
platforms. Old platforms are still supported through a FEC_LEGACY define
till they are also ported.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Acked-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 196719ec
...@@ -39,6 +39,7 @@ ...@@ -39,6 +39,7 @@
#include <linux/io.h> #include <linux/io.h>
#include <linux/irq.h> #include <linux/irq.h>
#include <linux/clk.h> #include <linux/clk.h>
#include <linux/platform_device.h>
#include <asm/cacheflush.h> #include <asm/cacheflush.h>
...@@ -49,12 +50,6 @@ ...@@ -49,12 +50,6 @@
#include "fec.h" #include "fec.h"
#if defined(CONFIG_FEC2)
#define FEC_MAX_PORTS 2
#else
#define FEC_MAX_PORTS 1
#endif
#ifdef CONFIG_ARCH_MXC #ifdef CONFIG_ARCH_MXC
#include <mach/hardware.h> #include <mach/hardware.h>
#define FEC_ALIGNMENT 0xf #define FEC_ALIGNMENT 0xf
...@@ -62,13 +57,22 @@ ...@@ -62,13 +57,22 @@
#define FEC_ALIGNMENT 0x3 #define FEC_ALIGNMENT 0x3
#endif #endif
#if defined CONFIG_M5272 || defined CONFIG_M527x || defined CONFIG_M523x \
|| defined CONFIG_M528x || defined CONFIG_M532x || defined CONFIG_M520x
#define FEC_LEGACY
/*
* Define the fixed address of the FEC hardware.
*/
#if defined(CONFIG_M5272) #if defined(CONFIG_M5272)
#define HAVE_mii_link_interrupt #define HAVE_mii_link_interrupt
#endif #endif
/* #if defined(CONFIG_FEC2)
* Define the fixed address of the FEC hardware. #define FEC_MAX_PORTS 2
*/ #else
#define FEC_MAX_PORTS 1
#endif
static unsigned int fec_hw[] = { static unsigned int fec_hw[] = {
#if defined(CONFIG_M5272) #if defined(CONFIG_M5272)
(MCF_MBAR + 0x840), (MCF_MBAR + 0x840),
...@@ -106,6 +110,8 @@ static unsigned char fec_mac_default[] = { ...@@ -106,6 +110,8 @@ static unsigned char fec_mac_default[] = {
#define FEC_FLASHMAC 0 #define FEC_FLASHMAC 0
#endif #endif
#endif /* FEC_LEGACY */
/* Forward declarations of some structures to support different PHYs /* Forward declarations of some structures to support different PHYs
*/ */
...@@ -189,6 +195,8 @@ struct fec_enet_private { ...@@ -189,6 +195,8 @@ struct fec_enet_private {
struct net_device *netdev; struct net_device *netdev;
struct clk *clk;
/* The saved address of a sent-in-place packet/buffer, for skfree(). */ /* The saved address of a sent-in-place packet/buffer, for skfree(). */
unsigned char *tx_bounce[TX_RING_SIZE]; unsigned char *tx_bounce[TX_RING_SIZE];
struct sk_buff* tx_skbuff[TX_RING_SIZE]; struct sk_buff* tx_skbuff[TX_RING_SIZE];
...@@ -1919,7 +1927,9 @@ mii_discover_phy(uint mii_reg, struct net_device *dev) ...@@ -1919,7 +1927,9 @@ mii_discover_phy(uint mii_reg, struct net_device *dev)
printk("FEC: No PHY device found.\n"); printk("FEC: No PHY device found.\n");
/* Disable external MII interface */ /* Disable external MII interface */
fecp->fec_mii_speed = fep->phy_speed = 0; fecp->fec_mii_speed = fep->phy_speed = 0;
#ifdef FREC_LEGACY
fec_disable_phy_intr(); fec_disable_phy_intr();
#endif
} }
} }
...@@ -2101,12 +2111,12 @@ fec_set_mac_address(struct net_device *dev) ...@@ -2101,12 +2111,12 @@ fec_set_mac_address(struct net_device *dev)
} }
/* Initialize the FEC Ethernet on 860T (or ColdFire 5272).
*/
/* /*
* XXX: We need to clean up on failure exits here. * XXX: We need to clean up on failure exits here.
*
* index is only used in legacy code
*/ */
int __init fec_enet_init(struct net_device *dev) int __init fec_enet_init(struct net_device *dev, int index)
{ {
struct fec_enet_private *fep = netdev_priv(dev); struct fec_enet_private *fep = netdev_priv(dev);
unsigned long mem_addr; unsigned long mem_addr;
...@@ -2114,11 +2124,6 @@ int __init fec_enet_init(struct net_device *dev) ...@@ -2114,11 +2124,6 @@ int __init fec_enet_init(struct net_device *dev)
cbd_t *cbd_base; cbd_t *cbd_base;
volatile fec_t *fecp; volatile fec_t *fecp;
int i, j; int i, j;
static int index = 0;
/* Only allow us to be probed once. */
if (index >= FEC_MAX_PORTS)
return -ENXIO;
/* Allocate memory for buffer descriptors. /* Allocate memory for buffer descriptors.
*/ */
...@@ -2134,7 +2139,7 @@ int __init fec_enet_init(struct net_device *dev) ...@@ -2134,7 +2139,7 @@ int __init fec_enet_init(struct net_device *dev)
/* Create an Ethernet device instance. /* Create an Ethernet device instance.
*/ */
fecp = (volatile fec_t *) fec_hw[index]; fecp = (volatile fec_t *)dev->base_addr;
fep->index = index; fep->index = index;
fep->hwp = fecp; fep->hwp = fecp;
...@@ -2145,16 +2150,24 @@ int __init fec_enet_init(struct net_device *dev) ...@@ -2145,16 +2150,24 @@ int __init fec_enet_init(struct net_device *dev)
fecp->fec_ecntrl = 1; fecp->fec_ecntrl = 1;
udelay(10); udelay(10);
/* Set the Ethernet address. If using multiple Enets on the 8xx, /* Set the Ethernet address */
* this needs some work to get unique addresses. #ifdef FEC_LEGACY
*
* This is our default MAC address unless the user changes
* it via eth_mac_addr (our dev->set_mac_addr handler).
*/
fec_get_mac(dev); fec_get_mac(dev);
#else
{
unsigned long l;
l = fecp->fec_addr_low;
dev->dev_addr[0] = (unsigned char)((l & 0xFF000000) >> 24);
dev->dev_addr[1] = (unsigned char)((l & 0x00FF0000) >> 16);
dev->dev_addr[2] = (unsigned char)((l & 0x0000FF00) >> 8);
dev->dev_addr[3] = (unsigned char)((l & 0x000000FF) >> 0);
l = fecp->fec_addr_high;
dev->dev_addr[4] = (unsigned char)((l & 0xFF000000) >> 24);
dev->dev_addr[5] = (unsigned char)((l & 0x00FF0000) >> 16);
}
#endif
cbd_base = (cbd_t *)mem_addr; cbd_base = (cbd_t *)mem_addr;
/* XXX: missing check for allocation failure */
/* Set receive and transmit descriptor base. /* Set receive and transmit descriptor base.
*/ */
...@@ -2222,10 +2235,12 @@ int __init fec_enet_init(struct net_device *dev) ...@@ -2222,10 +2235,12 @@ int __init fec_enet_init(struct net_device *dev)
fecp->fec_x_des_start = (unsigned long)fep->bd_dma + sizeof(cbd_t) fecp->fec_x_des_start = (unsigned long)fep->bd_dma + sizeof(cbd_t)
* RX_RING_SIZE; * RX_RING_SIZE;
#ifdef FEC_LEGACY
/* Install our interrupt handlers. This varies depending on /* Install our interrupt handlers. This varies depending on
* the architecture. * the architecture.
*/ */
fec_request_intrs(dev); fec_request_intrs(dev);
#endif
fecp->fec_grp_hash_table_high = 0; fecp->fec_grp_hash_table_high = 0;
fecp->fec_grp_hash_table_low = 0; fecp->fec_grp_hash_table_low = 0;
...@@ -2237,8 +2252,6 @@ int __init fec_enet_init(struct net_device *dev) ...@@ -2237,8 +2252,6 @@ int __init fec_enet_init(struct net_device *dev)
fecp->fec_hash_table_low = 0; fecp->fec_hash_table_low = 0;
#endif #endif
dev->base_addr = (unsigned long)fecp;
/* The FEC Ethernet specific entries in the device structure. */ /* The FEC Ethernet specific entries in the device structure. */
dev->open = fec_enet_open; dev->open = fec_enet_open;
dev->hard_start_xmit = fec_enet_start_xmit; dev->hard_start_xmit = fec_enet_start_xmit;
...@@ -2252,7 +2265,20 @@ int __init fec_enet_init(struct net_device *dev) ...@@ -2252,7 +2265,20 @@ int __init fec_enet_init(struct net_device *dev)
mii_free = mii_cmds; mii_free = mii_cmds;
/* setup MII interface */ /* setup MII interface */
#ifdef FEC_LEGACY
fec_set_mii(dev, fep); fec_set_mii(dev, fep);
#else
fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;
fecp->fec_x_cntrl = 0x00;
/*
* Set MII speed to 2.5 MHz
*/
fep->phy_speed = ((((clk_get_rate(fep->clk) / 2 + 4999999)
/ 2500000) / 2) & 0x3F) << 1;
fecp->fec_mii_speed = fep->phy_speed;
fec_restart(dev, 0);
#endif
/* Clear and enable interrupts */ /* Clear and enable interrupts */
fecp->fec_ievent = 0xffc00000; fecp->fec_ievent = 0xffc00000;
...@@ -2265,7 +2291,6 @@ int __init fec_enet_init(struct net_device *dev) ...@@ -2265,7 +2291,6 @@ int __init fec_enet_init(struct net_device *dev)
fep->phy_addr = 0; fep->phy_addr = 0;
mii_queue(dev, mk_mii_read(MII_REG_PHYIR1), mii_discover_phy); mii_queue(dev, mk_mii_read(MII_REG_PHYIR1), mii_discover_phy);
index++;
return 0; return 0;
} }
...@@ -2417,6 +2442,7 @@ fec_stop(struct net_device *dev) ...@@ -2417,6 +2442,7 @@ fec_stop(struct net_device *dev)
fecp->fec_mii_speed = fep->phy_speed; fecp->fec_mii_speed = fep->phy_speed;
} }
#ifdef FEC_LEGACY
static int __init fec_enet_module_init(void) static int __init fec_enet_module_init(void)
{ {
struct net_device *dev; struct net_device *dev;
...@@ -2428,7 +2454,8 @@ static int __init fec_enet_module_init(void) ...@@ -2428,7 +2454,8 @@ static int __init fec_enet_module_init(void)
dev = alloc_etherdev(sizeof(struct fec_enet_private)); dev = alloc_etherdev(sizeof(struct fec_enet_private));
if (!dev) if (!dev)
return -ENOMEM; return -ENOMEM;
err = fec_enet_init(dev); dev->base_addr = (unsigned long)fec_hw[i];
err = fec_enet_init(dev, i);
if (err) { if (err) {
free_netdev(dev); free_netdev(dev);
continue; continue;
...@@ -2443,6 +2470,170 @@ static int __init fec_enet_module_init(void) ...@@ -2443,6 +2470,170 @@ static int __init fec_enet_module_init(void)
} }
return 0; return 0;
} }
#else
static int __devinit
fec_probe(struct platform_device *pdev)
{
struct fec_enet_private *fep;
struct net_device *ndev;
int i, irq, ret = 0;
struct resource *r;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!r)
return -ENXIO;
r = request_mem_region(r->start, resource_size(r), pdev->name);
if (!r)
return -EBUSY;
/* Init network device */
ndev = alloc_etherdev(sizeof(struct fec_enet_private));
if (!ndev)
return -ENOMEM;
SET_NETDEV_DEV(ndev, &pdev->dev);
/* setup board info structure */
fep = netdev_priv(ndev);
memset(fep, 0, sizeof(*fep));
ndev->base_addr = (unsigned long)ioremap(r->start, resource_size(r));
if (!ndev->base_addr) {
ret = -ENOMEM;
goto failed_ioremap;
}
platform_set_drvdata(pdev, ndev);
/* This device has up to three irqs on some platforms */
for (i = 0; i < 3; i++) {
irq = platform_get_irq(pdev, i);
if (i && irq < 0)
break;
ret = request_irq(irq, fec_enet_interrupt, IRQF_DISABLED, pdev->name, ndev);
if (ret) {
while (i >= 0) {
irq = platform_get_irq(pdev, i);
free_irq(irq, ndev);
i--;
}
goto failed_irq;
}
}
fep->clk = clk_get(&pdev->dev, "fec_clk");
if (IS_ERR(fep->clk)) {
ret = PTR_ERR(fep->clk);
goto failed_clk;
}
clk_enable(fep->clk);
ret = fec_enet_init(ndev, 0);
if (ret)
goto failed_init;
ret = register_netdev(ndev);
if (ret)
goto failed_register;
return 0;
failed_register:
failed_init:
clk_disable(fep->clk);
clk_put(fep->clk);
failed_clk:
for (i = 0; i < 3; i++) {
irq = platform_get_irq(pdev, i);
if (irq > 0)
free_irq(irq, ndev);
}
failed_irq:
iounmap((void __iomem *)ndev->base_addr);
failed_ioremap:
free_netdev(ndev);
return ret;
}
static int __devexit
fec_drv_remove(struct platform_device *pdev)
{
struct net_device *ndev = platform_get_drvdata(pdev);
struct fec_enet_private *fep = netdev_priv(ndev);
platform_set_drvdata(pdev, NULL);
fec_stop(ndev);
clk_disable(fep->clk);
clk_put(fep->clk);
iounmap((void __iomem *)ndev->base_addr);
unregister_netdev(ndev);
free_netdev(ndev);
return 0;
}
static int
fec_suspend(struct platform_device *dev, pm_message_t state)
{
struct net_device *ndev = platform_get_drvdata(dev);
struct fec_enet_private *fep;
if (ndev) {
fep = netdev_priv(ndev);
if (netif_running(ndev)) {
netif_device_detach(ndev);
fec_stop(ndev);
}
}
return 0;
}
static int
fec_resume(struct platform_device *dev)
{
struct net_device *ndev = platform_get_drvdata(dev);
if (ndev) {
if (netif_running(ndev)) {
fec_enet_init(ndev, 0);
netif_device_attach(ndev);
}
}
return 0;
}
static struct platform_driver fec_driver = {
.driver = {
.name = "fec",
.owner = THIS_MODULE,
},
.probe = fec_probe,
.remove = __devexit_p(fec_drv_remove),
.suspend = fec_suspend,
.resume = fec_resume,
};
static int __init
fec_enet_module_init(void)
{
printk(KERN_INFO "FEC Ethernet Driver\n");
return platform_driver_register(&fec_driver);
}
static void __exit
fec_enet_cleanup(void)
{
platform_driver_unregister(&fec_driver);
}
module_exit(fec_enet_cleanup);
#endif /* FEC_LEGACY */
module_init(fec_enet_module_init); module_init(fec_enet_module_init);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册