提交 eaa02f75 编写于 作者: A Andrei Warkentin 提交者: Chris Ball

mmc: core: Rename erase_timeout to cmd_timeout_ms.

Renames erase_timeout to cmd_timeout_ms inside struct mmc_command.
First step to making host honor timeouts for non-data-transfer
commands. Cleans up erase timeout code.
Signed-off-by: NAndrei Warkentin <andreiw@motorola.com>
Signed-off-by: NChris Ball <cjb@laptop.org>
上级 853c6cac
...@@ -1187,9 +1187,8 @@ void mmc_init_erase(struct mmc_card *card) ...@@ -1187,9 +1187,8 @@ void mmc_init_erase(struct mmc_card *card)
} }
} }
static void mmc_set_mmc_erase_timeout(struct mmc_card *card, static unsigned int mmc_mmc_erase_timeout(struct mmc_card *card,
struct mmc_command *cmd, unsigned int arg, unsigned int qty)
unsigned int arg, unsigned int qty)
{ {
unsigned int erase_timeout; unsigned int erase_timeout;
...@@ -1246,38 +1245,42 @@ static void mmc_set_mmc_erase_timeout(struct mmc_card *card, ...@@ -1246,38 +1245,42 @@ static void mmc_set_mmc_erase_timeout(struct mmc_card *card,
if (mmc_host_is_spi(card->host) && erase_timeout < 1000) if (mmc_host_is_spi(card->host) && erase_timeout < 1000)
erase_timeout = 1000; erase_timeout = 1000;
cmd->erase_timeout = erase_timeout; return erase_timeout;
} }
static void mmc_set_sd_erase_timeout(struct mmc_card *card, static unsigned int mmc_sd_erase_timeout(struct mmc_card *card,
struct mmc_command *cmd, unsigned int arg, unsigned int arg,
unsigned int qty) unsigned int qty)
{ {
unsigned int erase_timeout;
if (card->ssr.erase_timeout) { if (card->ssr.erase_timeout) {
/* Erase timeout specified in SD Status Register (SSR) */ /* Erase timeout specified in SD Status Register (SSR) */
cmd->erase_timeout = card->ssr.erase_timeout * qty + erase_timeout = card->ssr.erase_timeout * qty +
card->ssr.erase_offset; card->ssr.erase_offset;
} else { } else {
/* /*
* Erase timeout not specified in SD Status Register (SSR) so * Erase timeout not specified in SD Status Register (SSR) so
* use 250ms per write block. * use 250ms per write block.
*/ */
cmd->erase_timeout = 250 * qty; erase_timeout = 250 * qty;
} }
/* Must not be less than 1 second */ /* Must not be less than 1 second */
if (cmd->erase_timeout < 1000) if (erase_timeout < 1000)
cmd->erase_timeout = 1000; erase_timeout = 1000;
return erase_timeout;
} }
static void mmc_set_erase_timeout(struct mmc_card *card, static unsigned int mmc_erase_timeout(struct mmc_card *card,
struct mmc_command *cmd, unsigned int arg, unsigned int arg,
unsigned int qty) unsigned int qty)
{ {
if (mmc_card_sd(card)) if (mmc_card_sd(card))
mmc_set_sd_erase_timeout(card, cmd, arg, qty); return mmc_sd_erase_timeout(card, arg, qty);
else else
mmc_set_mmc_erase_timeout(card, cmd, arg, qty); return mmc_mmc_erase_timeout(card, arg, qty);
} }
static int mmc_do_erase(struct mmc_card *card, unsigned int from, static int mmc_do_erase(struct mmc_card *card, unsigned int from,
...@@ -1351,7 +1354,7 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from, ...@@ -1351,7 +1354,7 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from,
cmd.opcode = MMC_ERASE; cmd.opcode = MMC_ERASE;
cmd.arg = arg; cmd.arg = arg;
cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
mmc_set_erase_timeout(card, &cmd, arg, qty); cmd.cmd_timeout_ms = mmc_erase_timeout(card, arg, qty);
err = mmc_wait_for_cmd(card->host, &cmd, 0); err = mmc_wait_for_cmd(card->host, &cmd, 0);
if (err) { if (err) {
printk(KERN_ERR "mmc_erase: erase error %d, status %#x\n", printk(KERN_ERR "mmc_erase: erase error %d, status %#x\n",
......
...@@ -92,7 +92,7 @@ struct mmc_command { ...@@ -92,7 +92,7 @@ struct mmc_command {
* actively failing requests * actively failing requests
*/ */
unsigned int erase_timeout; /* in milliseconds */ unsigned int cmd_timeout_ms; /* in milliseconds */
struct mmc_data *data; /* data segment associated with cmd */ struct mmc_data *data; /* data segment associated with cmd */
struct mmc_request *mrq; /* associated request */ struct mmc_request *mrq; /* associated request */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册