hwmon: (dme1737) Add SCH5127 support

Add support for the hardware monitoring capabilities of the SCH5127
chip to the dme1737 driver.
Signed-off-by: NJuerg Haefliger <juergh@gmail.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Tested-by: NJeff Rickman <jrickman@myamigos.us>

Documentation/hwmon/dme1737

@@ -9,11 +9,15 @@ Supported chips:
   * SMSC SCH3112, SCH3114, SCH3116
     Prefix: 'sch311x'
     Addresses scanned: none, address read from Super-I/O config space
-    Datasheet: http://www.nuhorizons.com/FeaturedProducts/Volume1/SMSC/311x.pdf
+    Datasheet: Available on the Internet
   * SMSC SCH5027
     Prefix: 'sch5027'
     Addresses scanned: I2C 0x2c, 0x2d, 0x2e
     Datasheet: Provided by SMSC upon request and under NDA
+  * SMSC SCH5127
+    Prefix: 'sch5127'
+    Addresses scanned: none, address read from Super-I/O config space
+    Datasheet: Provided by SMSC upon request and under NDA
 
 Authors:
     Juerg Haefliger <juergh@gmail.com>
@@ -36,8 +40,8 @@ Description
 -----------
 
 This driver implements support for the hardware monitoring capabilities of the
-SMSC DME1737 and Asus A8000 (which are the same), SMSC SCH5027, and SMSC
-SCH311x Super-I/O chips. These chips feature monitoring of 3 temp sensors
+SMSC DME1737 and Asus A8000 (which are the same), SMSC SCH5027, SCH311x,
+and SCH5127 Super-I/O chips. These chips feature monitoring of 3 temp sensors
 temp[1-3] (2 remote diodes and 1 internal), 7 voltages in[0-6] (6 external and
 1 internal) and up to 6 fan speeds fan[1-6]. Additionally, the chips implement
 up to 5 PWM outputs pwm[1-3,5-6] for controlling fan speeds both manually and
@@ -48,14 +52,14 @@ Fan[3-6] and pwm[3,5-6] are optional features and their availability depends on
 the configuration of the chip. The driver will detect which features are
 present during initialization and create the sysfs attributes accordingly.
 
-For the SCH311x, fan[1-3] and pwm[1-3] are always present and fan[4-6] and
-pwm[5-6] don't exist.
+For the SCH311x and SCH5127, fan[1-3] and pwm[1-3] are always present and
+fan[4-6] and pwm[5-6] don't exist.
 
 The hardware monitoring features of the DME1737, A8000, and SCH5027 are only
-accessible via SMBus, while the SCH311x only provides access via the ISA bus.
-The driver will therefore register itself as an I2C client driver if it detects
-a DME1737, A8000, or SCH5027 and as a platform driver if it detects a SCH311x
-chip.
+accessible via SMBus, while the SCH311x and SCH5127 only provide access via
+the ISA bus. The driver will therefore register itself as an I2C client driver
+if it detects a DME1737, A8000, or SCH5027 and as a platform driver if it
+detects a SCH311x or SCH5127 chip.
 
 
 Voltage Monitoring
@@ -76,7 +80,7 @@ DME1737, A8000:
 	in6: Vbat	(+3.0V)			0V - 4.38V
 
 SCH311x:
-	in0: +2.5V				0V - 6.64V
+	in0: +2.5V				0V - 3.32V
 	in1: Vccp	(processor core)	0V - 2V
 	in2: VCC	(internal +3.3V)	0V - 4.38V
 	in3: +5V				0V - 6.64V
@@ -93,6 +97,15 @@ SCH5027:
 	in5: VTR	(+3.3V standby)		0V - 4.38V
 	in6: Vbat	(+3.0V)			0V - 4.38V
 
+SCH5127:
+	in0: +2.5				0V - 3.32V
+	in1: Vccp	(processor core)	0V - 3V
+	in2: VCC	(internal +3.3V)	0V - 4.38V
+	in3: V2_IN				0V - 1.5V
+	in4: V1_IN				0V - 1.5V
+	in5: VTR	(+3.3V standby)		0V - 4.38V
+	in6: Vbat	(+3.0V)			0V - 4.38V
+
 Each voltage input has associated min and max limits which trigger an alarm
 when crossed.
 
@@ -293,3 +306,21 @@ pwm[1-3]_auto_point1_pwm	RW	Auto PWM pwm point. Auto_point1 is the
 pwm[1-3]_auto_point2_pwm	RO	Auto PWM pwm point. Auto_point2 is the
 					full-speed duty-cycle which is hard-
 					wired to 255 (100% duty-cycle).
+
+Chip Differences
+----------------
+
+Feature			dme1737	sch311x	sch5027	sch5127
+-------------------------------------------------------
+temp[1-3]_offset	yes	yes
+vid			yes
+zone3			yes	yes	yes
+zone[1-3]_hyst		yes	yes
+pwm min/off		yes	yes
+fan3			opt	yes	opt	yes
+pwm3			opt	yes	opt	yes
+fan4			opt		opt
+fan5			opt		opt
+pwm5			opt		opt
+fan6			opt		opt
+pwm6			opt		opt