X25: Update X25 interface documentation

Signed-off-by: NAndrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Documentation/networking/x25-iface.txt

@@ -20,23 +20,23 @@ the rest of the skbuff, if any more information does exist.
 Packet Layer to Device Driver
 -----------------------------
 
-First Byte = 0x00
+First Byte = 0x00 (X25_IFACE_DATA)
 
 This indicates that the rest of the skbuff contains data to be transmitted
 over the LAPB link. The LAPB link should already exist before any data is
 passed down.
 
-First Byte = 0x01
+First Byte = 0x01 (X25_IFACE_CONNECT)
 
 Establish the LAPB link. If the link is already established then the connect
 confirmation message should be returned as soon as possible.
 
-First Byte = 0x02
+First Byte = 0x02 (X25_IFACE_DISCONNECT)
 
 Terminate the LAPB link. If it is already disconnected then the disconnect
 confirmation message should be returned as soon as possible.
 
-First Byte = 0x03
+First Byte = 0x03 (X25_IFACE_PARAMS)
 
 LAPB parameters. To be defined.
 
@@ -44,22 +44,22 @@ LAPB parameters. To be defined.
 Device Driver to Packet Layer
 -----------------------------
 
-First Byte = 0x00
+First Byte = 0x00 (X25_IFACE_DATA)
 
 This indicates that the rest of the skbuff contains data that has been
 received over the LAPB link.
 
-First Byte = 0x01
+First Byte = 0x01 (X25_IFACE_CONNECT)
 
 LAPB link has been established. The same message is used for both a LAPB
 link connect_confirmation and a connect_indication.
 
-First Byte = 0x02
+First Byte = 0x02 (X25_IFACE_DISCONNECT)
 
 LAPB link has been terminated. This same message is used for both a LAPB
 link disconnect_confirmation and a disconnect_indication.
 
-First Byte = 0x03
+First Byte = 0x03 (X25_IFACE_PARAMS)
 
 LAPB parameters. To be defined.