Merge tag 'regmap-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Pull regmap updates from Mark Brown:
 "This has been a busy release for regmap.

  By far the biggest set of changes here are those from Markus Pargmann
  which implement support for block transfers in smbus devices.  This
  required quite a bit of refactoring but leaves us better able to
  handle odd restrictions that controllers may have and with better
  performance on smbus.

  Other new features include:

   - Fix interactions with lockdep for nested regmaps (eg, when a device
     using regmap is connected to a bus where the bus controller has a
     separate regmap).  Lockdep's default class identification is too
     crude to work without help.

   - Support for must write bitfield operations, useful for operations
     which require writing a bit to trigger them from Kuniori Morimoto.

   - Support for delaying during register patch application from Nariman
     Poushin.

   - Support for overriding cache state via the debugfs implementation
     from Richard Fitzgerald"

* tag 'regmap-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (25 commits)
  regmap: fix a NULL pointer dereference in __regmap_init
  regmap: Support bulk reads for devices without raw formatting
  regmap-i2c: Add smbus i2c block support
  regmap: Add raw_write/read checks for max_raw_write/read sizes
  regmap: regmap max_raw_read/write getter functions
  regmap: Introduce max_raw_read/write for regmap_bulk_read/write
  regmap: Add missing comments about struct regmap_bus
  regmap: No multi_write support if bus->write does not exist
  regmap: Split use_single_rw internally into use_single_read/write
  regmap: Fix regmap_bulk_write for bus writes
  regmap: regmap_raw_read return error on !bus->read
  regulator: core: Print at debug level on debugfs creation failure
  regmap: Fix regmap_can_raw_write check
  regmap: fix typos in regmap.c
  regmap: Fix integertypes for register address and value
  regmap: Move documentation to regmap.h
  regmap: Use different lockdep class for each regmap init call
  thermal: sti: Add parentheses around bridge->ops->regmap_init call
  mfd: vexpress: Add parentheses around bridge->ops->regmap_init call
  regmap: debugfs: Fix misuse of IS_ENABLED
  ...

drivers/base/regmap/internal.h

@@ -139,11 +139,17 @@ struct regmap {
 	struct reg_sequence *patch;
 	int patch_regs;
 
-	/* if set, converts bulk rw to single rw */
-	bool use_single_rw;
+	/* if set, converts bulk read to single read */
+	bool use_single_read;
+	/* if set, converts bulk read to single read */
+	bool use_single_write;
 	/* if set, the device supports multi write mode */
 	bool can_multi_write;
 
+	/* if set, raw reads/writes are limited to this size */
+	size_t max_raw_read;
+	size_t max_raw_write;
+
 	struct rb_root range_tree;
 	void *selector_work_buf;	/* Scratch buffer used for selector */
 };

drivers/base/regmap/regcache.c

@@ -729,7 +729,7 @@ int regcache_sync_block(struct regmap *map, void *block,
 			unsigned int block_base, unsigned int start,
 			unsigned int end)
 {
-	if (regmap_can_raw_write(map) && !map->use_single_rw)
+	if (regmap_can_raw_write(map) && !map->use_single_write)
 		return regcache_sync_block_raw(map, block, cache_present,
 					       block_base, start, end);
 	else

drivers/base/regmap/regmap-ac97.c

@@ -78,37 +78,24 @@ static const struct regmap_bus ac97_regmap_bus = {
 	.reg_read = regmap_ac97_reg_read,
 };
 
-/**
- * regmap_init_ac97(): Initialise AC'97 register map
- *
- * @ac97: Device that will be interacted with
- * @config: Configuration for register map
- *
- * The return value will be an ERR_PTR() on error or a valid pointer to
- * a struct regmap.
- */
-struct regmap *regmap_init_ac97(struct snd_ac97 *ac97,
-				const struct regmap_config *config)
+struct regmap *__regmap_init_ac97(struct snd_ac97 *ac97,
+				  const struct regmap_config *config,
+				  struct lock_class_key *lock_key,
+				  const char *lock_name)
 {
-	return regmap_init(&ac97->dev, &ac97_regmap_bus, ac97, config);
+	return __regmap_init(&ac97->dev, &ac97_regmap_bus, ac97, config,
+			     lock_key, lock_name);
 }
-EXPORT_SYMBOL_GPL(regmap_init_ac97);
+EXPORT_SYMBOL_GPL(__regmap_init_ac97);
 
-/**
- * devm_regmap_init_ac97(): Initialise AC'97 register map
- *
- * @ac97: Device that will be interacted with
- * @config: Configuration for register map
- *
- * The return value will be an ERR_PTR() on error or a valid pointer
- * to a struct regmap.  The regmap will be automatically freed by the
- * device management code.
- */
-struct regmap *devm_regmap_init_ac97(struct snd_ac97 *ac97,
-				     const struct regmap_config *config)
+struct regmap *__devm_regmap_init_ac97(struct snd_ac97 *ac97,
+				       const struct regmap_config *config,
+				       struct lock_class_key *lock_key,
+				       const char *lock_name)
 {
-	return devm_regmap_init(&ac97->dev, &ac97_regmap_bus, ac97, config);
+	return __devm_regmap_init(&ac97->dev, &ac97_regmap_bus, ac97, config,
+				  lock_key, lock_name);
 }
-EXPORT_SYMBOL_GPL(devm_regmap_init_ac97);
+EXPORT_SYMBOL_GPL(__devm_regmap_init_ac97);
 
 MODULE_LICENSE("GPL v2");

drivers/base/regmap/regmap-debugfs.c

@@ -469,6 +469,87 @@ static const struct file_operations regmap_access_fops = {
 	.llseek = default_llseek,
 };
 
+static ssize_t regmap_cache_only_write_file(struct file *file,
+					    const char __user *user_buf,
+					    size_t count, loff_t *ppos)
+{
+	struct regmap *map = container_of(file->private_data,
+					  struct regmap, cache_only);
+	ssize_t result;
+	bool was_enabled, require_sync = false;
+	int err;
+
+	map->lock(map->lock_arg);
+
+	was_enabled = map->cache_only;
+
+	result = debugfs_write_file_bool(file, user_buf, count, ppos);
+	if (result < 0) {
+		map->unlock(map->lock_arg);
+		return result;
+	}
+
+	if (map->cache_only && !was_enabled) {
+		dev_warn(map->dev, "debugfs cache_only=Y forced\n");
+		add_taint(TAINT_USER, LOCKDEP_STILL_OK);
+	} else if (!map->cache_only && was_enabled) {
+		dev_warn(map->dev, "debugfs cache_only=N forced: syncing cache\n");
+		require_sync = true;
+	}
+
+	map->unlock(map->lock_arg);
+
+	if (require_sync) {
+		err = regcache_sync(map);
+		if (err)
+			dev_err(map->dev, "Failed to sync cache %d\n", err);
+	}
+
+	return result;
+}
+
+static const struct file_operations regmap_cache_only_fops = {
+	.open = simple_open,
+	.read = debugfs_read_file_bool,
+	.write = regmap_cache_only_write_file,
+};
+
+static ssize_t regmap_cache_bypass_write_file(struct file *file,
+					      const char __user *user_buf,
+					      size_t count, loff_t *ppos)
+{
+	struct regmap *map = container_of(file->private_data,
+					  struct regmap, cache_bypass);
+	ssize_t result;
+	bool was_enabled;
+
+	map->lock(map->lock_arg);
+
+	was_enabled = map->cache_bypass;
+
+	result = debugfs_write_file_bool(file, user_buf, count, ppos);
+	if (result < 0)
+		goto out;
+
+	if (map->cache_bypass && !was_enabled) {
+		dev_warn(map->dev, "debugfs cache_bypass=Y forced\n");
+		add_taint(TAINT_USER, LOCKDEP_STILL_OK);
+	} else if (!map->cache_bypass && was_enabled) {
+		dev_warn(map->dev, "debugfs cache_bypass=N forced\n");
+	}
+
+out:
+	map->unlock(map->lock_arg);
+
+	return result;
+}
+
+static const struct file_operations regmap_cache_bypass_fops = {
+	.open = simple_open,
+	.read = debugfs_read_file_bool,
+	.write = regmap_cache_bypass_write_file,
+};
+
 void regmap_debugfs_init(struct regmap *map, const char *name)
 {
 	struct rb_node *next;
@@ -518,10 +599,11 @@ void regmap_debugfs_init(struct regmap *map, const char *name)
 	if (map->max_register || regmap_readable(map, 0)) {
 		umode_t registers_mode;
 
-		if (IS_ENABLED(REGMAP_ALLOW_WRITE_DEBUGFS))
-			registers_mode = 0600;
-		else
-			registers_mode = 0400;
+#if defined(REGMAP_ALLOW_WRITE_DEBUGFS)
+		registers_mode = 0600;
+#else
+		registers_mode = 0400;
+#endif
 
 		debugfs_create_file("registers", registers_mode, map->debugfs,
 				    map, &regmap_map_fops);
@@ -530,12 +612,13 @@ void regmap_debugfs_init(struct regmap *map, const char *name)
 	}
 
 	if (map->cache_type) {
-		debugfs_create_bool("cache_only", 0400, map->debugfs,
-				    &map->cache_only);
+		debugfs_create_file("cache_only", 0600, map->debugfs,
+				    &map->cache_only, &regmap_cache_only_fops);
 		debugfs_create_bool("cache_dirty", 0400, map->debugfs,
 				    &map->cache_dirty);
-		debugfs_create_bool("cache_bypass", 0400, map->debugfs,
-				    &map->cache_bypass);
+		debugfs_create_file("cache_bypass", 0600, map->debugfs,
+				    &map->cache_bypass,
+				    &regmap_cache_bypass_fops);
 	}
 
 	next = rb_first(&map->range_tree);

drivers/base/regmap/regmap-i2c.c

@@ -209,11 +209,60 @@ static struct regmap_bus regmap_i2c = {
 	.val_format_endian_default = REGMAP_ENDIAN_BIG,
 };
 
+static int regmap_i2c_smbus_i2c_write(void *context, const void *data,
+				      size_t count)
+{
+	struct device *dev = context;
+	struct i2c_client *i2c = to_i2c_client(dev);
+
+	if (count < 1)
+		return -EINVAL;
+	if (count >= I2C_SMBUS_BLOCK_MAX)
+		return -E2BIG;
+
+	--count;
+	return i2c_smbus_write_i2c_block_data(i2c, ((u8 *)data)[0], count,
+					      ((u8 *)data + 1));
+}
+
+static int regmap_i2c_smbus_i2c_read(void *context, const void *reg,
+				     size_t reg_size, void *val,
+				     size_t val_size)
+{
+	struct device *dev = context;
+	struct i2c_client *i2c = to_i2c_client(dev);
+	int ret;
+
+	if (reg_size != 1 || val_size < 1)
+		return -EINVAL;
+	if (val_size >= I2C_SMBUS_BLOCK_MAX)
+		return -E2BIG;
+
+	ret = i2c_smbus_read_i2c_block_data(i2c, ((u8 *)reg)[0], val_size, val);
+	if (ret == val_size)
+		return 0;
+	else if (ret < 0)
+		return ret;
+	else
+		return -EIO;
+}
+
+static struct regmap_bus regmap_i2c_smbus_i2c_block = {
+	.write = regmap_i2c_smbus_i2c_write,
+	.read = regmap_i2c_smbus_i2c_read,
+	.max_raw_read = I2C_SMBUS_BLOCK_MAX,
+	.max_raw_write = I2C_SMBUS_BLOCK_MAX,
+};
+
 static const struct regmap_bus *regmap_get_i2c_bus(struct i2c_client *i2c,
 					const struct regmap_config *config)
 {
 	if (i2c_check_functionality(i2c->adapter, I2C_FUNC_I2C))
 		return &regmap_i2c;
+	else if (config->reg_bits == 8 &&
+		 i2c_check_functionality(i2c->adapter,
+					 I2C_FUNC_SMBUS_I2C_BLOCK))
+		return &regmap_i2c_smbus_i2c_block;
 	else if (config->val_bits == 16 && config->reg_bits == 8 &&
 		 i2c_check_functionality(i2c->adapter,
 					 I2C_FUNC_SMBUS_WORD_DATA))
@@ -233,47 +282,34 @@ static const struct regmap_bus *regmap_get_i2c_bus(struct i2c_client *i2c,
 	return ERR_PTR(-ENOTSUPP);
 }
 
-/**
- * regmap_init_i2c(): Initialise register map
- *
- * @i2c: Device that will be interacted with
- * @config: Configuration for register map
- *
- * The return value will be an ERR_PTR() on error or a valid pointer to
- * a struct regmap.
- */
-struct regmap *regmap_init_i2c(struct i2c_client *i2c,
-			       const struct regmap_config *config)
+struct regmap *__regmap_init_i2c(struct i2c_client *i2c,
+				 const struct regmap_config *config,
+				 struct lock_class_key *lock_key,
+				 const char *lock_name)
 {
 	const struct regmap_bus *bus = regmap_get_i2c_bus(i2c, config);
 
 	if (IS_ERR(bus))
 		return ERR_CAST(bus);
 
-	return regmap_init(&i2c->dev, bus, &i2c->dev, config);
+	return __regmap_init(&i2c->dev, bus, &i2c->dev, config,
+			     lock_key, lock_name);
 }
-EXPORT_SYMBOL_GPL(regmap_init_i2c);
+EXPORT_SYMBOL_GPL(__regmap_init_i2c);
 
-/**
- * devm_regmap_init_i2c(): Initialise managed register map
- *
- * @i2c: Device that will be interacted with
- * @config: Configuration for register map
- *
- * The return value will be an ERR_PTR() on error or a valid pointer
- * to a struct regmap.  The regmap will be automatically freed by the
- * device management code.
- */
-struct regmap *devm_regmap_init_i2c(struct i2c_client *i2c,
-				    const struct regmap_config *config)
+struct regmap *__devm_regmap_init_i2c(struct i2c_client *i2c,
+				      const struct regmap_config *config,
+				      struct lock_class_key *lock_key,
+				      const char *lock_name)
 {
 	const struct regmap_bus *bus = regmap_get_i2c_bus(i2c, config);
 
 	if (IS_ERR(bus))
 		return ERR_CAST(bus);
 
-	return devm_regmap_init(&i2c->dev, bus, &i2c->dev, config);
+	return __devm_regmap_init(&i2c->dev, bus, &i2c->dev, config,
+				  lock_key, lock_name);
 }
-EXPORT_SYMBOL_GPL(devm_regmap_init_i2c);
+EXPORT_SYMBOL_GPL(__devm_regmap_init_i2c);
 
 MODULE_LICENSE("GPL");

drivers/base/regmap/regmap-irq.c

@@ -209,7 +209,7 @@ static irqreturn_t regmap_irq_thread(int irq, void *d)
 	 * Read in the statuses, using a single bulk read if possible
 	 * in order to reduce the I/O overheads.
 	 */
-	if (!map->use_single_rw && map->reg_stride == 1 &&
+	if (!map->use_single_read && map->reg_stride == 1 &&
 	    data->irq_reg_stride == 1) {
 		u8 *buf8 = data->status_reg_buf;
 		u16 *buf16 = data->status_reg_buf;
@@ -398,7 +398,7 @@ int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
 	else
 		d->irq_reg_stride = 1;
 
-	if (!map->use_single_rw && map->reg_stride == 1 &&
+	if (!map->use_single_read && map->reg_stride == 1 &&
 	    d->irq_reg_stride == 1) {
 		d->status_reg_buf = kmalloc(map->format.val_bytes *
 					    chip->num_regs, GFP_KERNEL);

drivers/base/regmap/regmap-mmio.c

@@ -296,20 +296,11 @@ static struct regmap_mmio_context *regmap_mmio_gen_context(struct device *dev,
 	return ERR_PTR(ret);
 }
 
-/**
- * regmap_init_mmio_clk(): Initialise register map with register clock
- *
- * @dev: Device that will be interacted with
- * @clk_id: register clock consumer ID
- * @regs: Pointer to memory-mapped IO region
- * @config: Configuration for register map
- *
- * The return value will be an ERR_PTR() on error or a valid pointer to
- * a struct regmap.
- */
-struct regmap *regmap_init_mmio_clk(struct device *dev, const char *clk_id,
-				    void __iomem *regs,
-				    const struct regmap_config *config)
+struct regmap *__regmap_init_mmio_clk(struct device *dev, const char *clk_id,
+				      void __iomem *regs,
+				      const struct regmap_config *config,
+				      struct lock_class_key *lock_key,
+				      const char *lock_name)
 {
 	struct regmap_mmio_context *ctx;
 
@@ -317,25 +308,17 @@ struct regmap *regmap_init_mmio_clk(struct device *dev, const char *clk_id,
 	if (IS_ERR(ctx))
 		return ERR_CAST(ctx);
 
-	return regmap_init(dev, &regmap_mmio, ctx, config);
+	return __regmap_init(dev, &regmap_mmio, ctx, config,
+			     lock_key, lock_name);
 }
-EXPORT_SYMBOL_GPL(regmap_init_mmio_clk);
-
-/**
- * devm_regmap_init_mmio_clk(): Initialise managed register map with clock
- *
- * @dev: Device that will be interacted with
- * @clk_id: register clock consumer ID
- * @regs: Pointer to memory-mapped IO region
- * @config: Configuration for register map
- *
- * The return value will be an ERR_PTR() on error or a valid pointer
- * to a struct regmap.  The regmap will be automatically freed by the
- * device management code.
- */
-struct regmap *devm_regmap_init_mmio_clk(struct device *dev, const char *clk_id,
-					 void __iomem *regs,
-					 const struct regmap_config *config)
+EXPORT_SYMBOL_GPL(__regmap_init_mmio_clk);
+
+struct regmap *__devm_regmap_init_mmio_clk(struct device *dev,
+					   const char *clk_id,
+					   void __iomem *regs,
+					   const struct regmap_config *config,
+					   struct lock_class_key *lock_key,
+					   const char *lock_name)
 {
 	struct regmap_mmio_context *ctx;
 
@@ -343,8 +326,9 @@ struct regmap *devm_regmap_init_mmio_clk(struct device *dev, const char *clk_id,
 	if (IS_ERR(ctx))
 		return ERR_CAST(ctx);
 
-	return devm_regmap_init(dev, &regmap_mmio, ctx, config);
+	return __devm_regmap_init(dev, &regmap_mmio, ctx, config,
+				  lock_key, lock_name);
 }
-EXPORT_SYMBOL_GPL(devm_regmap_init_mmio_clk);
+EXPORT_SYMBOL_GPL(__devm_regmap_init_mmio_clk);
 
 MODULE_LICENSE("GPL v2");

drivers/base/regmap/regmap-spi.c

@@ -113,37 +113,24 @@ static struct regmap_bus regmap_spi = {
 	.val_format_endian_default = REGMAP_ENDIAN_BIG,
 };
 
-/**
- * regmap_init_spi(): Initialise register map
- *
- * @spi: Device that will be interacted with
- * @config: Configuration for register map
- *
- * The return value will be an ERR_PTR() on error or a valid pointer to
- * a struct regmap.
- */
-struct regmap *regmap_init_spi(struct spi_device *spi,
-			       const struct regmap_config *config)
+struct regmap *__regmap_init_spi(struct spi_device *spi,
+				 const struct regmap_config *config,
+				 struct lock_class_key *lock_key,
+				 const char *lock_name)
 {
-	return regmap_init(&spi->dev, &regmap_spi, &spi->dev, config);
+	return __regmap_init(&spi->dev, &regmap_spi, &spi->dev, config,
+			     lock_key, lock_name);
 }
-EXPORT_SYMBOL_GPL(regmap_init_spi);
+EXPORT_SYMBOL_GPL(__regmap_init_spi);
 
-/**
- * devm_regmap_init_spi(): Initialise register map
- *
- * @spi: Device that will be interacted with
- * @config: Configuration for register map
- *
- * The return value will be an ERR_PTR() on error or a valid pointer
- * to a struct regmap.  The map will be automatically freed by the
- * device management code.
- */
-struct regmap *devm_regmap_init_spi(struct spi_device *spi,
-				    const struct regmap_config *config)
+struct regmap *__devm_regmap_init_spi(struct spi_device *spi,
+				      const struct regmap_config *config,
+				      struct lock_class_key *lock_key,
+				      const char *lock_name)
 {
-	return devm_regmap_init(&spi->dev, &regmap_spi, &spi->dev, config);
+	return __devm_regmap_init(&spi->dev, &regmap_spi, &spi->dev, config,
+				  lock_key, lock_name);
 }
-EXPORT_SYMBOL_GPL(devm_regmap_init_spi);
+EXPORT_SYMBOL_GPL(__devm_regmap_init_spi);
 
 MODULE_LICENSE("GPL");

drivers/base/regmap/regmap-spmi.c

@@ -91,36 +91,25 @@ static struct regmap_bus regmap_spmi_base = {
 	.val_format_endian_default	= REGMAP_ENDIAN_NATIVE,
 };
 
-/**
- * regmap_init_spmi_base(): Create regmap for the Base register space
- * @sdev:	SPMI device that will be interacted with
- * @config:	Configuration for register map
- *
- * The return value will be an ERR_PTR() on error or a valid pointer to
- * a struct regmap.
- */
-struct regmap *regmap_init_spmi_base(struct spmi_device *sdev,
-				     const struct regmap_config *config)
+struct regmap *__regmap_init_spmi_base(struct spmi_device *sdev,
+				       const struct regmap_config *config,
+				       struct lock_class_key *lock_key,
+				       const char *lock_name)
 {
-	return regmap_init(&sdev->dev, &regmap_spmi_base, sdev, config);
+	return __regmap_init(&sdev->dev, &regmap_spmi_base, sdev, config,
+			     lock_key, lock_name);
 }
-EXPORT_SYMBOL_GPL(regmap_init_spmi_base);
+EXPORT_SYMBOL_GPL(__regmap_init_spmi_base);
 
-/**
- * devm_regmap_init_spmi_base(): Create managed regmap for Base register space
- * @sdev:	SPMI device that will be interacted with
- * @config:	Configuration for register map
- *
- * The return value will be an ERR_PTR() on error or a valid pointer
- * to a struct regmap.  The regmap will be automatically freed by the
- * device management code.
- */
-struct regmap *devm_regmap_init_spmi_base(struct spmi_device *sdev,
-					  const struct regmap_config *config)
+struct regmap *__devm_regmap_init_spmi_base(struct spmi_device *sdev,
+					    const struct regmap_config *config,
+					    struct lock_class_key *lock_key,
+					    const char *lock_name)
 {
-	return devm_regmap_init(&sdev->dev, &regmap_spmi_base, sdev, config);
+	return __devm_regmap_init(&sdev->dev, &regmap_spmi_base, sdev, config,
+				  lock_key, lock_name);
 }
-EXPORT_SYMBOL_GPL(devm_regmap_init_spmi_base);
+EXPORT_SYMBOL_GPL(__devm_regmap_init_spmi_base);
 
 static int regmap_spmi_ext_read(void *context,
 				const void *reg, size_t reg_size,
@@ -222,35 +211,24 @@ static struct regmap_bus regmap_spmi_ext = {
 	.val_format_endian_default	= REGMAP_ENDIAN_NATIVE,
 };
 
-/**
- * regmap_init_spmi_ext(): Create regmap for Ext register space
- * @sdev:	Device that will be interacted with
- * @config:	Configuration for register map
- *
- * The return value will be an ERR_PTR() on error or a valid pointer to
- * a struct regmap.
- */
-struct regmap *regmap_init_spmi_ext(struct spmi_device *sdev,
-				    const struct regmap_config *config)
+struct regmap *__regmap_init_spmi_ext(struct spmi_device *sdev,
+				      const struct regmap_config *config,
+				      struct lock_class_key *lock_key,
+				      const char *lock_name)
 {
-	return regmap_init(&sdev->dev, &regmap_spmi_ext, sdev, config);
+	return __regmap_init(&sdev->dev, &regmap_spmi_ext, sdev, config,
+			     lock_key, lock_name);
 }
-EXPORT_SYMBOL_GPL(regmap_init_spmi_ext);
+EXPORT_SYMBOL_GPL(__regmap_init_spmi_ext);
 
-/**
- * devm_regmap_init_spmi_ext(): Create managed regmap for Ext register space
- * @sdev:	SPMI device that will be interacted with
- * @config:	Configuration for register map
- *
- * The return value will be an ERR_PTR() on error or a valid pointer
- * to a struct regmap.  The regmap will be automatically freed by the
- * device management code.
- */
-struct regmap *devm_regmap_init_spmi_ext(struct spmi_device *sdev,
-				     const struct regmap_config *config)
+struct regmap *__devm_regmap_init_spmi_ext(struct spmi_device *sdev,
+					   const struct regmap_config *config,
+					   struct lock_class_key *lock_key,
+					   const char *lock_name)
 {
-	return devm_regmap_init(&sdev->dev, &regmap_spmi_ext, sdev, config);
+	return __devm_regmap_init(&sdev->dev, &regmap_spmi_ext, sdev, config,
+				  lock_key, lock_name);
 }
-EXPORT_SYMBOL_GPL(devm_regmap_init_spmi_ext);
+EXPORT_SYMBOL_GPL(__devm_regmap_init_spmi_ext);
 
 MODULE_LICENSE("GPL");

drivers/base/regmap/regmap.c

@@ -18,6 +18,7 @@
 #include <linux/of.h>
 #include <linux/rbtree.h>
 #include <linux/sched.h>
+#include <linux/delay.h>
 
 #define CREATE_TRACE_POINTS
 #include "trace.h"
@@ -93,6 +94,9 @@ bool regmap_writeable(struct regmap *map, unsigned int reg)
 
 bool regmap_readable(struct regmap *map, unsigned int reg)
 {
+	if (!map->reg_read)
+		return false;
+
 	if (map->max_register && reg > map->max_register)
 		return false;
 
@@ -515,22 +519,12 @@ enum regmap_endian regmap_get_val_endian(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(regmap_get_val_endian);
 
-/**
- * regmap_init(): Initialise register map
- *
- * @dev: Device that will be interacted with
- * @bus: Bus-specific callbacks to use with device
- * @bus_context: Data passed to bus-specific callbacks
- * @config: Configuration for register map
- *
- * The return value will be an ERR_PTR() on error or a valid pointer to
- * a struct regmap.  This function should generally not be called
- * directly, it should be called by bus-specific init functions.
- */
-struct regmap *regmap_init(struct device *dev,
-			   const struct regmap_bus *bus,
-			   void *bus_context,
-			   const struct regmap_config *config)
+struct regmap *__regmap_init(struct device *dev,
+			     const struct regmap_bus *bus,
+			     void *bus_context,
+			     const struct regmap_config *config,
+			     struct lock_class_key *lock_key,
+			     const char *lock_name)
 {
 	struct regmap *map;
 	int ret = -EINVAL;
@@ -556,10 +550,14 @@ struct regmap *regmap_init(struct device *dev,
 			spin_lock_init(&map->spinlock);
 			map->lock = regmap_lock_spinlock;
 			map->unlock = regmap_unlock_spinlock;
+			lockdep_set_class_and_name(&map->spinlock,
+						   lock_key, lock_name);
 		} else {
 			mutex_init(&map->mutex);
 			map->lock = regmap_lock_mutex;
 			map->unlock = regmap_unlock_mutex;
+			lockdep_set_class_and_name(&map->mutex,
+						   lock_key, lock_name);
 		}
 		map->lock_arg = map;
 	}
@@ -573,8 +571,13 @@ struct regmap *regmap_init(struct device *dev,
 		map->reg_stride = config->reg_stride;
 	else
 		map->reg_stride = 1;
-	map->use_single_rw = config->use_single_rw;
-	map->can_multi_write = config->can_multi_write;
+	map->use_single_read = config->use_single_rw || !bus || !bus->read;
+	map->use_single_write = config->use_single_rw || !bus || !bus->write;
+	map->can_multi_write = config->can_multi_write && bus && bus->write;
+	if (bus) {
+		map->max_raw_read = bus->max_raw_read;
+		map->max_raw_write = bus->max_raw_write;
+	}
 	map->dev = dev;
 	map->bus = bus;
 	map->bus_context = bus_context;
@@ -763,7 +766,7 @@ struct regmap *regmap_init(struct device *dev,
 		if ((reg_endian != REGMAP_ENDIAN_BIG) ||
 		    (val_endian != REGMAP_ENDIAN_BIG))
 			goto err_map;
-		map->use_single_rw = true;
+		map->use_single_write = true;
 	}
 
 	if (!map->format.format_write &&
@@ -899,30 +902,19 @@ struct regmap *regmap_init(struct device *dev,
 err:
 	return ERR_PTR(ret);
 }
-EXPORT_SYMBOL_GPL(regmap_init);
+EXPORT_SYMBOL_GPL(__regmap_init);
 
 static void devm_regmap_release(struct device *dev, void *res)
 {
 	regmap_exit(*(struct regmap **)res);
 }
 
-/**
- * devm_regmap_init(): Initialise managed register map
- *
- * @dev: Device that will be interacted with
- * @bus: Bus-specific callbacks to use with device
- * @bus_context: Data passed to bus-specific callbacks
- * @config: Configuration for register map
- *
- * The return value will be an ERR_PTR() on error or a valid pointer
- * to a struct regmap.  This function should generally not be called
- * directly, it should be called by bus-specific init functions.  The
- * map will be automatically freed by the device management code.
- */
-struct regmap *devm_regmap_init(struct device *dev,
-				const struct regmap_bus *bus,
-				void *bus_context,
-				const struct regmap_config *config)
+struct regmap *__devm_regmap_init(struct device *dev,
+				  const struct regmap_bus *bus,
+				  void *bus_context,
+				  const struct regmap_config *config,
+				  struct lock_class_key *lock_key,
+				  const char *lock_name)
 {
 	struct regmap **ptr, *regmap;
 
@@ -930,7 +922,8 @@ struct regmap *devm_regmap_init(struct device *dev,
 	if (!ptr)
 		return ERR_PTR(-ENOMEM);
 
-	regmap = regmap_init(dev, bus, bus_context, config);
+	regmap = __regmap_init(dev, bus, bus_context, config,
+			       lock_key, lock_name);
 	if (!IS_ERR(regmap)) {
 		*ptr = regmap;
 		devres_add(dev, ptr);
@@ -940,7 +933,7 @@ struct regmap *devm_regmap_init(struct device *dev,
 
 	return regmap;
 }
-EXPORT_SYMBOL_GPL(devm_regmap_init);
+EXPORT_SYMBOL_GPL(__devm_regmap_init);
 
 static void regmap_field_init(struct regmap_field *rm_field,
 	struct regmap *regmap, struct reg_field reg_field)
@@ -1382,10 +1375,33 @@ int _regmap_raw_write(struct regmap *map, unsigned int reg,
  */
 bool regmap_can_raw_write(struct regmap *map)
 {
-	return map->bus && map->format.format_val && map->format.format_reg;
+	return map->bus && map->bus->write && map->format.format_val &&
+		map->format.format_reg;
 }
 EXPORT_SYMBOL_GPL(regmap_can_raw_write);
 
+/**
+ * regmap_get_raw_read_max - Get the maximum size we can read
+ *
+ * @map: Map to check.
+ */
+size_t regmap_get_raw_read_max(struct regmap *map)
+{
+	return map->max_raw_read;
+}
+EXPORT_SYMBOL_GPL(regmap_get_raw_read_max);
+
+/**
+ * regmap_get_raw_write_max - Get the maximum size we can read
+ *
+ * @map: Map to check.
+ */
+size_t regmap_get_raw_write_max(struct regmap *map)
+{
+	return map->max_raw_write;
+}
+EXPORT_SYMBOL_GPL(regmap_get_raw_write_max);
+
 static int _regmap_bus_formatted_write(void *context, unsigned int reg,
 				       unsigned int val)
 {
@@ -1555,6 +1571,8 @@ int regmap_raw_write(struct regmap *map, unsigned int reg,
 		return -EINVAL;
 	if (val_len % map->format.val_bytes)
 		return -EINVAL;
+	if (map->max_raw_write && map->max_raw_write > val_len)
+		return -E2BIG;
 
 	map->lock(map->lock_arg);
 
@@ -1681,6 +1699,7 @@ int regmap_bulk_write(struct regmap *map, unsigned int reg, const void *val,
 {
 	int ret = 0, i;
 	size_t val_bytes = map->format.val_bytes;
+	size_t total_size = val_bytes * val_count;
 
 	if (map->bus && !map->format.parse_inplace)
 		return -EINVAL;
@@ -1689,9 +1708,15 @@ int regmap_bulk_write(struct regmap *map, unsigned int reg, const void *val,
 
 	/*
 	 * Some devices don't support bulk write, for
-	 * them we have a series of single write operations.
+	 * them we have a series of single write operations in the first two if
+	 * blocks.
+	 *
+	 * The first if block is used for memory mapped io. It does not allow
+	 * val_bytes of 3 for example.
+	 * The second one is used for busses which do not have this limitation
+	 * and can write arbitrary value lengths.
 	 */
-	if (!map->bus || map->use_single_rw) {
+	if (!map->bus) {
 		map->lock(map->lock_arg);
 		for (i = 0; i < val_count; i++) {
 			unsigned int ival;
@@ -1723,6 +1748,38 @@ int regmap_bulk_write(struct regmap *map, unsigned int reg, const void *val,
 		}
 out:
 		map->unlock(map->lock_arg);
+	} else if (map->use_single_write ||
+		   (map->max_raw_write && map->max_raw_write < total_size)) {
+		int chunk_stride = map->reg_stride;
+		size_t chunk_size = val_bytes;
+		size_t chunk_count = val_count;
+
+		if (!map->use_single_write) {
+			chunk_size = map->max_raw_write;
+			if (chunk_size % val_bytes)
+				chunk_size -= chunk_size % val_bytes;
+			chunk_count = total_size / chunk_size;
+			chunk_stride *= chunk_size / val_bytes;
+		}
+
+		map->lock(map->lock_arg);
+		/* Write as many bytes as possible with chunk_size */
+		for (i = 0; i < chunk_count; i++) {
+			ret = _regmap_raw_write(map,
+						reg + (i * chunk_stride),
+						val + (i * chunk_size),
+						chunk_size);
+			if (ret)
+				break;
+		}
+
+		/* Write remaining bytes */
+		if (!ret && chunk_size * i < total_size) {
+			ret = _regmap_raw_write(map, reg + (i * chunk_stride),
+						val + (i * chunk_size),
+						total_size - i * chunk_size);
+		}
+		map->unlock(map->lock_arg);
 	} else {
 		void *wval;
 
@@ -1752,7 +1809,7 @@ EXPORT_SYMBOL_GPL(regmap_bulk_write);
  *
  * the (register,newvalue) pairs in regs have not been formatted, but
  * they are all in the same page and have been changed to being page
- * relative. The page register has been written if that was neccessary.
+ * relative. The page register has been written if that was necessary.
  */
 static int _regmap_raw_multi_reg_write(struct regmap *map,
 				       const struct reg_sequence *regs,
@@ -1780,8 +1837,8 @@ static int _regmap_raw_multi_reg_write(struct regmap *map,
 	u8 = buf;
 
 	for (i = 0; i < num_regs; i++) {
-		int reg = regs[i].reg;
-		int val = regs[i].def;
+		unsigned int reg = regs[i].reg;
+		unsigned int val = regs[i].def;
 		trace_regmap_hw_write_start(map, reg, 1);
 		map->format.format_reg(u8, reg, map->reg_shift);
 		u8 += reg_bytes + pad_bytes;
@@ -1819,10 +1876,12 @@ static int _regmap_range_multi_paged_reg_write(struct regmap *map,
 	int i, n;
 	struct reg_sequence *base;
 	unsigned int this_page = 0;
+	unsigned int page_change = 0;
 	/*
 	 * the set of registers are not neccessarily in order, but
 	 * since the order of write must be preserved this algorithm
-	 * chops the set each time the page changes
+	 * chops the set each time the page changes. This also applies
+	 * if there is a delay required at any point in the sequence.
 	 */
 	base = regs;
 	for (i = 0, n = 0; i < num_regs; i++, n++) {
@@ -1838,16 +1897,48 @@ static int _regmap_range_multi_paged_reg_write(struct regmap *map,
 				this_page = win_page;
 			if (win_page != this_page) {
 				this_page = win_page;
+				page_change = 1;
+			}
+		}
+
+		/* If we have both a page change and a delay make sure to
+		 * write the regs and apply the delay before we change the
+		 * page.
+		 */
+
+		if (page_change || regs[i].delay_us) {
+
+				/* For situations where the first write requires
+				 * a delay we need to make sure we don't call
+				 * raw_multi_reg_write with n=0
+				 * This can't occur with page breaks as we
+				 * never write on the first iteration
+				 */
+				if (regs[i].delay_us && i == 0)
+					n = 1;
+
 				ret = _regmap_raw_multi_reg_write(map, base, n);
 				if (ret != 0)
 					return ret;
+
+				if (regs[i].delay_us)
+					udelay(regs[i].delay_us);
+
 				base += n;
 				n = 0;
-			}
-			ret = _regmap_select_page(map, &base[n].reg, range, 1);
-			if (ret != 0)
-				return ret;
+
+				if (page_change) {
+					ret = _regmap_select_page(map,
+								  &base[n].reg,
+								  range, 1);
+					if (ret != 0)
+						return ret;
+
+					page_change = 0;
+				}
+
 		}
+
 	}
 	if (n > 0)
 		return _regmap_raw_multi_reg_write(map, base, n);
@@ -1866,6 +1957,9 @@ static int _regmap_multi_reg_write(struct regmap *map,
 			ret = _regmap_write(map, regs[i].reg, regs[i].def);
 			if (ret != 0)
 				return ret;
+
+			if (regs[i].delay_us)
+				udelay(regs[i].delay_us);
 		}
 		return 0;
 	}
@@ -1905,8 +1999,12 @@ static int _regmap_multi_reg_write(struct regmap *map,
 	for (i = 0; i < num_regs; i++) {
 		unsigned int reg = regs[i].reg;
 		struct regmap_range_node *range;
+
+		/* Coalesce all the writes between a page break or a delay
+		 * in a sequence
+		 */
 		range = _regmap_range_lookup(map, reg);
-		if (range) {
+		if (range || regs[i].delay_us) {
 			size_t len = sizeof(struct reg_sequence)*num_regs;
 			struct reg_sequence *base = kmemdup(regs, len,
 							   GFP_KERNEL);
@@ -2062,7 +2160,7 @@ static int _regmap_raw_read(struct regmap *map, unsigned int reg, void *val,
 
 	/*
 	 * Some buses or devices flag reads by setting the high bits in the
-	 * register addresss; since it's always the high bits for all
+	 * register address; since it's always the high bits for all
 	 * current formats we can do this here rather than in
 	 * formatting.  This may break if we get interesting formats.
 	 */
@@ -2109,8 +2207,6 @@ static int _regmap_read(struct regmap *map, unsigned int reg,
 	int ret;
 	void *context = _regmap_map_get_context(map);
 
-	WARN_ON(!map->reg_read);
-
 	if (!map->cache_bypass) {
 		ret = regcache_read(map, reg, val);
 		if (ret == 0)
@@ -2191,11 +2287,22 @@ int regmap_raw_read(struct regmap *map, unsigned int reg, void *val,
 		return -EINVAL;
 	if (reg % map->reg_stride)
 		return -EINVAL;
+	if (val_count == 0)
+		return -EINVAL;
 
 	map->lock(map->lock_arg);
 
 	if (regmap_volatile_range(map, reg, val_count) || map->cache_bypass ||
 	    map->cache_type == REGCACHE_NONE) {
+		if (!map->bus->read) {
+			ret = -ENOTSUPP;
+			goto out;
+		}
+		if (map->max_raw_read && map->max_raw_read < val_len) {
+			ret = -E2BIG;
+			goto out;
+		}
+
 		/* Physical block read if there's no cache involved */
 		ret = _regmap_raw_read(map, reg, val, val_len);
 
@@ -2304,20 +2411,51 @@ int regmap_bulk_read(struct regmap *map, unsigned int reg, void *val,
 		 * Some devices does not support bulk read, for
 		 * them we have a series of single read operations.
 		 */
-		if (map->use_single_rw) {
-			for (i = 0; i < val_count; i++) {
-				ret = regmap_raw_read(map,
-						reg + (i * map->reg_stride),
-						val + (i * val_bytes),
-						val_bytes);
-				if (ret != 0)
-					return ret;
-			}
-		} else {
+		size_t total_size = val_bytes * val_count;
+
+		if (!map->use_single_read &&
+		    (!map->max_raw_read || map->max_raw_read > total_size)) {
 			ret = regmap_raw_read(map, reg, val,
 					      val_bytes * val_count);
 			if (ret != 0)
 				return ret;
+		} else {
+			/*
+			 * Some devices do not support bulk read or do not
+			 * support large bulk reads, for them we have a series
+			 * of read operations.
+			 */
+			int chunk_stride = map->reg_stride;
+			size_t chunk_size = val_bytes;
+			size_t chunk_count = val_count;
+
+			if (!map->use_single_read) {
+				chunk_size = map->max_raw_read;
+				if (chunk_size % val_bytes)
+					chunk_size -= chunk_size % val_bytes;
+				chunk_count = total_size / chunk_size;
+				chunk_stride *= chunk_size / val_bytes;
+			}
+
+			/* Read bytes that fit into a multiple of chunk_size */
+			for (i = 0; i < chunk_count; i++) {
+				ret = regmap_raw_read(map,
+						      reg + (i * chunk_stride),
+						      val + (i * chunk_size),
+						      chunk_size);
+				if (ret != 0)
+					return ret;
+			}
+
+			/* Read remaining bytes */
+			if (chunk_size * i < total_size) {
+				ret = regmap_raw_read(map,
+						      reg + (i * chunk_stride),
+						      val + (i * chunk_size),
+						      total_size - i * chunk_size);
+				if (ret != 0)
+					return ret;
+			}
 		}
 
 		for (i = 0; i < val_count * val_bytes; i += val_bytes)
@@ -2329,7 +2467,34 @@ int regmap_bulk_read(struct regmap *map, unsigned int reg, void *val,
 					  &ival);
 			if (ret != 0)
 				return ret;
-			map->format.format_val(val + (i * val_bytes), ival, 0);
+
+			if (map->format.format_val) {
+				map->format.format_val(val + (i * val_bytes), ival, 0);
+			} else {
+				/* Devices providing read and write
+				 * operations can use the bulk I/O
+				 * functions if they define a val_bytes,
+				 * we assume that the values are native
+				 * endian.
+				 */
+				u32 *u32 = val;
+				u16 *u16 = val;
+				u8 *u8 = val;
+
+				switch (map->format.val_bytes) {
+				case 4:
+					u32[i] = ival;
+					break;
+				case 2:
+					u16[i] = ival;
+					break;
+				case 1:
+					u8[i] = ival;
+					break;
+				default:
+					return -EINVAL;
+				}
+			}
 		}
 	}
 

drivers/bus/vexpress-config.c

@@ -107,7 +107,7 @@ struct regmap *devm_regmap_init_vexpress_config(struct device *dev)
 	if (!res)
 		return ERR_PTR(-ENOMEM);
 
-	regmap = bridge->ops->regmap_init(dev, bridge->context);
+	regmap = (bridge->ops->regmap_init)(dev, bridge->context);
 	if (IS_ERR(regmap)) {
 		devres_free(res);
 		return regmap;

drivers/regulator/core.c

@@ -1262,7 +1262,7 @@ static struct regulator *create_regulator(struct regulator_dev *rdev,
 	regulator->debugfs = debugfs_create_dir(regulator->supply_name,
 						rdev->debugfs);
 	if (!regulator->debugfs) {
-		rdev_warn(rdev, "Failed to create debugfs directory\n");
+		rdev_dbg(rdev, "Failed to create debugfs directory\n");
 	} else {
 		debugfs_create_u32("uA_load", 0444, regulator->debugfs,
 				   &regulator->uA_load);

drivers/thermal/st/st_thermal.c

@@ -214,7 +214,7 @@ int st_thermal_register(struct platform_device *pdev,
 
 	sensor->ops = sensor->cdata->ops;
 
-	ret = sensor->ops->regmap_init(sensor);
+	ret = (sensor->ops->regmap_init)(sensor);
 	if (ret)
 		return ret;
 

fs/debugfs/file.c

@@ -435,8 +435,8 @@ struct dentry *debugfs_create_atomic_t(const char *name, umode_t mode,
 }
 EXPORT_SYMBOL_GPL(debugfs_create_atomic_t);
 
-static ssize_t read_file_bool(struct file *file, char __user *user_buf,
-			      size_t count, loff_t *ppos)
+ssize_t debugfs_read_file_bool(struct file *file, char __user *user_buf,
+			       size_t count, loff_t *ppos)
 {
 	char buf[3];
 	u32 *val = file->private_data;
@@ -449,9 +449,10 @@ static ssize_t read_file_bool(struct file *file, char __user *user_buf,
 	buf[2] = 0x00;
 	return simple_read_from_buffer(user_buf, count, ppos, buf, 2);
 }
+EXPORT_SYMBOL_GPL(debugfs_read_file_bool);
 
-static ssize_t write_file_bool(struct file *file, const char __user *user_buf,
-			       size_t count, loff_t *ppos)
+ssize_t debugfs_write_file_bool(struct file *file, const char __user *user_buf,
+				size_t count, loff_t *ppos)
 {
 	char buf[32];
 	size_t buf_size;
@@ -468,10 +469,11 @@ static ssize_t write_file_bool(struct file *file, const char __user *user_buf,
 
 	return count;
 }
+EXPORT_SYMBOL_GPL(debugfs_write_file_bool);
 
 static const struct file_operations fops_bool = {
-	.read =		read_file_bool,
-	.write =	write_file_bool,
+	.read =		debugfs_read_file_bool,
+	.write =	debugfs_write_file_bool,
 	.open =		simple_open,
 	.llseek =	default_llseek,
 };

include/linux/debugfs.h

@@ -116,6 +116,12 @@ struct dentry *debugfs_create_devm_seqfile(struct device *dev, const char *name,
 
 bool debugfs_initialized(void);
 
+ssize_t debugfs_read_file_bool(struct file *file, char __user *user_buf,
+			       size_t count, loff_t *ppos);
+
+ssize_t debugfs_write_file_bool(struct file *file, const char __user *user_buf,
+				size_t count, loff_t *ppos);
+
 #else
 
 #include <linux/err.h>
@@ -282,6 +288,20 @@ static inline struct dentry *debugfs_create_devm_seqfile(struct device *dev,
 	return ERR_PTR(-ENODEV);
 }
 
+static inline ssize_t debugfs_read_file_bool(struct file *file,
+					     char __user *user_buf,
+					     size_t count, loff_t *ppos)
+{
+	return -ENODEV;
+}
+
+static inline ssize_t debugfs_write_file_bool(struct file *file,
+					      const char __user *user_buf,
+					      size_t count, loff_t *ppos)
+{
+	return -ENODEV;
+}
+
 #endif
 
 #endif

include/linux/regmap.h

@@ -17,6 +17,7 @@
 #include <linux/rbtree.h>
 #include <linux/err.h>
 #include <linux/bug.h>
+#include <linux/lockdep.h>
 
 struct module;
 struct device;
@@ -51,14 +52,17 @@ struct reg_default {
 };
 
 /**
- * Register/value pairs for sequences of writes
+ * Register/value pairs for sequences of writes with an optional delay in
+ * microseconds to be applied after each write.
  *
  * @reg: Register address.
  * @def: Register value.
+ * @delay_us: Delay to be applied after the register write in microseconds
  */
 struct reg_sequence {
 	unsigned int reg;
 	unsigned int def;
+	unsigned int delay_us;
 };
 
 #ifdef CONFIG_REGMAP
@@ -307,8 +311,12 @@ typedef void (*regmap_hw_free_context)(void *context);
  *                if not implemented  on a given device.
  * @async_write: Write operation which completes asynchronously, optional and
  *               must serialise with respect to non-async I/O.
+ * @reg_write: Write a single register value to the given register address. This
+ *             write operation has to complete when returning from the function.
  * @read: Read operation.  Data is returned in the buffer used to transmit
  *         data.
+ * @reg_read: Read a single register value from a given register address.
+ * @free_context: Free context.
  * @async_alloc: Allocate a regmap_async() structure.
  * @read_flag_mask: Mask to be set in the top byte of the register when doing
  *                  a read.
@@ -318,7 +326,8 @@ typedef void (*regmap_hw_free_context)(void *context);
  * @val_format_endian_default: Default endianness for formatted register
  *     values. Used when the regmap_config specifies DEFAULT. If this is
  *     DEFAULT, BIG is assumed.
- * @async_size: Size of struct used for async work.
+ * @max_raw_read: Max raw read size that can be used on the bus.
+ * @max_raw_write: Max raw write size that can be used on the bus.
  */
 struct regmap_bus {
 	bool fast_io;
@@ -333,47 +342,186 @@ struct regmap_bus {
 	u8 read_flag_mask;
 	enum regmap_endian reg_format_endian_default;
 	enum regmap_endian val_format_endian_default;
+	size_t max_raw_read;
+	size_t max_raw_write;
 };
 
-struct regmap *regmap_init(struct device *dev,
-			   const struct regmap_bus *bus,
-			   void *bus_context,
-			   const struct regmap_config *config);
+/*
+ * __regmap_init functions.
+ *
+ * These functions take a lock key and name parameter, and should not be called
+ * directly. Instead, use the regmap_init macros that generate a key and name
+ * for each call.
+ */
+struct regmap *__regmap_init(struct device *dev,
+			     const struct regmap_bus *bus,
+			     void *bus_context,
+			     const struct regmap_config *config,
+			     struct lock_class_key *lock_key,
+			     const char *lock_name);
+struct regmap *__regmap_init_i2c(struct i2c_client *i2c,
+				 const struct regmap_config *config,
+				 struct lock_class_key *lock_key,
+				 const char *lock_name);
+struct regmap *__regmap_init_spi(struct spi_device *dev,
+				 const struct regmap_config *config,
+				 struct lock_class_key *lock_key,
+				 const char *lock_name);
+struct regmap *__regmap_init_spmi_base(struct spmi_device *dev,
+				       const struct regmap_config *config,
+				       struct lock_class_key *lock_key,
+				       const char *lock_name);
+struct regmap *__regmap_init_spmi_ext(struct spmi_device *dev,
+				      const struct regmap_config *config,
+				      struct lock_class_key *lock_key,
+				      const char *lock_name);
+struct regmap *__regmap_init_mmio_clk(struct device *dev, const char *clk_id,
+				      void __iomem *regs,
+				      const struct regmap_config *config,
+				      struct lock_class_key *lock_key,
+				      const char *lock_name);
+struct regmap *__regmap_init_ac97(struct snd_ac97 *ac97,
+				  const struct regmap_config *config,
+				  struct lock_class_key *lock_key,
+				  const char *lock_name);
+
+struct regmap *__devm_regmap_init(struct device *dev,
+				  const struct regmap_bus *bus,
+				  void *bus_context,
+				  const struct regmap_config *config,
+				  struct lock_class_key *lock_key,
+				  const char *lock_name);
+struct regmap *__devm_regmap_init_i2c(struct i2c_client *i2c,
+				      const struct regmap_config *config,
+				      struct lock_class_key *lock_key,
+				      const char *lock_name);
+struct regmap *__devm_regmap_init_spi(struct spi_device *dev,
+				      const struct regmap_config *config,
+				      struct lock_class_key *lock_key,
+				      const char *lock_name);
+struct regmap *__devm_regmap_init_spmi_base(struct spmi_device *dev,
+					    const struct regmap_config *config,
+					    struct lock_class_key *lock_key,
+					    const char *lock_name);
+struct regmap *__devm_regmap_init_spmi_ext(struct spmi_device *dev,
+					   const struct regmap_config *config,
+					   struct lock_class_key *lock_key,
+					   const char *lock_name);
+struct regmap *__devm_regmap_init_mmio_clk(struct device *dev,
+					   const char *clk_id,
+					   void __iomem *regs,
+					   const struct regmap_config *config,
+					   struct lock_class_key *lock_key,
+					   const char *lock_name);
+struct regmap *__devm_regmap_init_ac97(struct snd_ac97 *ac97,
+				       const struct regmap_config *config,
+				       struct lock_class_key *lock_key,
+				       const char *lock_name);
+
+/*
+ * Wrapper for regmap_init macros to include a unique lockdep key and name
+ * for each call. No-op if CONFIG_LOCKDEP is not set.
+ *
+ * @fn: Real function to call (in the form __[*_]regmap_init[_*])
+ * @name: Config variable name (#config in the calling macro)
+ **/
+#ifdef CONFIG_LOCKDEP
+#define __regmap_lockdep_wrapper(fn, name, ...)				\
+(									\
+	({								\
+		static struct lock_class_key _key;			\
+		fn(__VA_ARGS__, &_key,					\
+			KBUILD_BASENAME ":"				\
+			__stringify(__LINE__) ":"			\
+			"(" name ")->lock");				\
+	})								\
+)
+#else
+#define __regmap_lockdep_wrapper(fn, name, ...) fn(__VA_ARGS__, NULL, NULL)
+#endif
+
+/**
+ * regmap_init(): Initialise register map
+ *
+ * @dev: Device that will be interacted with
+ * @bus: Bus-specific callbacks to use with device
+ * @bus_context: Data passed to bus-specific callbacks
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer to
+ * a struct regmap.  This function should generally not be called
+ * directly, it should be called by bus-specific init functions.
+ */
+#define regmap_init(dev, bus, bus_context, config)			\
+	__regmap_lockdep_wrapper(__regmap_init, #config,		\
+				dev, bus, bus_context, config)
 int regmap_attach_dev(struct device *dev, struct regmap *map,
-				 const struct regmap_config *config);
-struct regmap *regmap_init_i2c(struct i2c_client *i2c,
-			       const struct regmap_config *config);
-struct regmap *regmap_init_spi(struct spi_device *dev,
-			       const struct regmap_config *config);
-struct regmap *regmap_init_spmi_base(struct spmi_device *dev,
-				     const struct regmap_config *config);
-struct regmap *regmap_init_spmi_ext(struct spmi_device *dev,
-				    const struct regmap_config *config);
-struct regmap *regmap_init_mmio_clk(struct device *dev, const char *clk_id,
-				    void __iomem *regs,
-				    const struct regmap_config *config);
-struct regmap *regmap_init_ac97(struct snd_ac97 *ac97,
-				const struct regmap_config *config);
-
-struct regmap *devm_regmap_init(struct device *dev,
-				const struct regmap_bus *bus,
-				void *bus_context,
-				const struct regmap_config *config);
-struct regmap *devm_regmap_init_i2c(struct i2c_client *i2c,
-				    const struct regmap_config *config);
-struct regmap *devm_regmap_init_spi(struct spi_device *dev,
-				    const struct regmap_config *config);
-struct regmap *devm_regmap_init_spmi_base(struct spmi_device *dev,
-					  const struct regmap_config *config);
-struct regmap *devm_regmap_init_spmi_ext(struct spmi_device *dev,
-					 const struct regmap_config *config);
-struct regmap *devm_regmap_init_mmio_clk(struct device *dev, const char *clk_id,
-					 void __iomem *regs,
-					 const struct regmap_config *config);
-struct regmap *devm_regmap_init_ac97(struct snd_ac97 *ac97,
-				     const struct regmap_config *config);
+		      const struct regmap_config *config);
 
-bool regmap_ac97_default_volatile(struct device *dev, unsigned int reg);
+/**
+ * regmap_init_i2c(): Initialise register map
+ *
+ * @i2c: Device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer to
+ * a struct regmap.
+ */
+#define regmap_init_i2c(i2c, config)					\
+	__regmap_lockdep_wrapper(__regmap_init_i2c, #config,		\
+				i2c, config)
+
+/**
+ * regmap_init_spi(): Initialise register map
+ *
+ * @spi: Device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer to
+ * a struct regmap.
+ */
+#define regmap_init_spi(dev, config)					\
+	__regmap_lockdep_wrapper(__regmap_init_spi, #config,		\
+				dev, config)
+
+/**
+ * regmap_init_spmi_base(): Create regmap for the Base register space
+ * @sdev:	SPMI device that will be interacted with
+ * @config:	Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer to
+ * a struct regmap.
+ */
+#define regmap_init_spmi_base(dev, config)				\
+	__regmap_lockdep_wrapper(__regmap_init_spmi_base, #config,	\
+				dev, config)
+
+/**
+ * regmap_init_spmi_ext(): Create regmap for Ext register space
+ * @sdev:	Device that will be interacted with
+ * @config:	Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer to
+ * a struct regmap.
+ */
+#define regmap_init_spmi_ext(dev, config)				\
+	__regmap_lockdep_wrapper(__regmap_init_spmi_ext, #config,	\
+				dev, config)
+
+/**
+ * regmap_init_mmio_clk(): Initialise register map with register clock
+ *
+ * @dev: Device that will be interacted with
+ * @clk_id: register clock consumer ID
+ * @regs: Pointer to memory-mapped IO region
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer to
+ * a struct regmap.
+ */
+#define regmap_init_mmio_clk(dev, clk_id, regs, config)			\
+	__regmap_lockdep_wrapper(__regmap_init_mmio_clk, #config,	\
+				dev, clk_id, regs, config)
 
 /**
  * regmap_init_mmio(): Initialise register map
@@ -385,12 +533,109 @@ bool regmap_ac97_default_volatile(struct device *dev, unsigned int reg);
  * The return value will be an ERR_PTR() on error or a valid pointer to
  * a struct regmap.
  */
-static inline struct regmap *regmap_init_mmio(struct device *dev,
-					void __iomem *regs,
-					const struct regmap_config *config)
-{
-	return regmap_init_mmio_clk(dev, NULL, regs, config);
-}
+#define regmap_init_mmio(dev, regs, config)		\
+	regmap_init_mmio_clk(dev, NULL, regs, config)
+
+/**
+ * regmap_init_ac97(): Initialise AC'97 register map
+ *
+ * @ac97: Device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer to
+ * a struct regmap.
+ */
+#define regmap_init_ac97(ac97, config)					\
+	__regmap_lockdep_wrapper(__regmap_init_ac97, #config,		\
+				ac97, config)
+bool regmap_ac97_default_volatile(struct device *dev, unsigned int reg);
+
+/**
+ * devm_regmap_init(): Initialise managed register map
+ *
+ * @dev: Device that will be interacted with
+ * @bus: Bus-specific callbacks to use with device
+ * @bus_context: Data passed to bus-specific callbacks
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer
+ * to a struct regmap.  This function should generally not be called
+ * directly, it should be called by bus-specific init functions.  The
+ * map will be automatically freed by the device management code.
+ */
+#define devm_regmap_init(dev, bus, bus_context, config)			\
+	__regmap_lockdep_wrapper(__devm_regmap_init, #config,		\
+				dev, bus, bus_context, config)
+
+/**
+ * devm_regmap_init_i2c(): Initialise managed register map
+ *
+ * @i2c: Device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer
+ * to a struct regmap.  The regmap will be automatically freed by the
+ * device management code.
+ */
+#define devm_regmap_init_i2c(i2c, config)				\
+	__regmap_lockdep_wrapper(__devm_regmap_init_i2c, #config,	\
+				i2c, config)
+
+/**
+ * devm_regmap_init_spi(): Initialise register map
+ *
+ * @spi: Device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer
+ * to a struct regmap.  The map will be automatically freed by the
+ * device management code.
+ */
+#define devm_regmap_init_spi(dev, config)				\
+	__regmap_lockdep_wrapper(__devm_regmap_init_spi, #config,	\
+				dev, config)
+
+/**
+ * devm_regmap_init_spmi_base(): Create managed regmap for Base register space
+ * @sdev:	SPMI device that will be interacted with
+ * @config:	Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer
+ * to a struct regmap.  The regmap will be automatically freed by the
+ * device management code.
+ */
+#define devm_regmap_init_spmi_base(dev, config)				\
+	__regmap_lockdep_wrapper(__devm_regmap_init_spmi_base, #config,	\
+				dev, config)
+
+/**
+ * devm_regmap_init_spmi_ext(): Create managed regmap for Ext register space
+ * @sdev:	SPMI device that will be interacted with
+ * @config:	Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer
+ * to a struct regmap.  The regmap will be automatically freed by the
+ * device management code.
+ */
+#define devm_regmap_init_spmi_ext(dev, config)				\
+	__regmap_lockdep_wrapper(__devm_regmap_init_spmi_ext, #config,	\
+				dev, config)
+
+/**
+ * devm_regmap_init_mmio_clk(): Initialise managed register map with clock
+ *
+ * @dev: Device that will be interacted with
+ * @clk_id: register clock consumer ID
+ * @regs: Pointer to memory-mapped IO region
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer
+ * to a struct regmap.  The regmap will be automatically freed by the
+ * device management code.
+ */
+#define devm_regmap_init_mmio_clk(dev, clk_id, regs, config)		\
+	__regmap_lockdep_wrapper(__devm_regmap_init_mmio_clk, #config,	\
+				dev, clk_id, regs, config)
 
 /**
  * devm_regmap_init_mmio(): Initialise managed register map
@@ -403,12 +648,22 @@ static inline struct regmap *regmap_init_mmio(struct device *dev,
  * to a struct regmap.  The regmap will be automatically freed by the
  * device management code.
  */
-static inline struct regmap *devm_regmap_init_mmio(struct device *dev,
-					void __iomem *regs,
-					const struct regmap_config *config)
-{
-	return devm_regmap_init_mmio_clk(dev, NULL, regs, config);
-}
+#define devm_regmap_init_mmio(dev, regs, config)		\
+	devm_regmap_init_mmio_clk(dev, NULL, regs, config)
+
+/**
+ * devm_regmap_init_ac97(): Initialise AC'97 register map
+ *
+ * @ac97: Device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer
+ * to a struct regmap.  The regmap will be automatically freed by the
+ * device management code.
+ */
+#define devm_regmap_init_ac97(ac97, config)				\
+	__regmap_lockdep_wrapper(__devm_regmap_init_ac97, #config,	\
+				ac97, config)
 
 void regmap_exit(struct regmap *map);
 int regmap_reinit_cache(struct regmap *map,
@@ -450,6 +705,8 @@ int regmap_get_max_register(struct regmap *map);
 int regmap_get_reg_stride(struct regmap *map);
 int regmap_async_complete(struct regmap *map);
 bool regmap_can_raw_write(struct regmap *map);
+size_t regmap_get_raw_read_max(struct regmap *map);
+size_t regmap_get_raw_write_max(struct regmap *map);
 
 int regcache_sync(struct regmap *map);
 int regcache_sync_region(struct regmap *map, unsigned int min,