Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 5255/1: Update jornada ssp to remove build errors/warnings
  [ARM] omap: back out 'internal_clock' support
  [ARM] 5249/1: davinci: remove redundant check in davinci_psc_config()

arch/arm/mach-davinci/psc.c

@@ -70,9 +70,6 @@ void davinci_psc_config(unsigned int domain, unsigned int id, char enable)
 {
 	u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask;
 
-	if (id < 0)
-		return;
-
 	mdctl = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id);
 	if (enable)
 		mdctl |= 0x00000003;	/* Enable Module */

arch/arm/mach-sa1100/include/mach/jornada720.h

 /*
  * arch/arm/mach-sa1100/include/mach/jornada720.h
  *
- * This file contains SSP/MCU communication definitions for HP Jornada 710/720/728
+ * SSP/MCU communication definitions for HP Jornada 710/720/728
  *
- * Copyright (C) 2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
- *  Copyright (C) 2000 John Ankcorn <jca@lcs.mit.edu>
+ * Copyright 2007,2008 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
+ *  Copyright 2000 John Ankcorn <jca@lcs.mit.edu>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -25,3 +25,8 @@
 #define PWMOFF			0xDF
 #define TXDUMMY			0x11
 #define ERRORCODE		0x00
+
+extern void jornada_ssp_start(void);
+extern void jornada_ssp_end(void);
+extern int jornada_ssp_inout(u8 byte);
+extern int jornada_ssp_byte(u8 byte);

arch/arm/mach-sa1100/jornada720_ssp.c

@@ -21,8 +21,8 @@
 #include <linux/slab.h>
 
 #include <mach/hardware.h>
-#include <asm/hardware/ssp.h>
 #include <mach/jornada720.h>
+#include <asm/hardware/ssp.h>
 
 static DEFINE_SPINLOCK(jornada_ssp_lock);
 static unsigned long jornada_ssp_flags;
@@ -109,12 +109,12 @@ EXPORT_SYMBOL(jornada_ssp_inout);
  * jornada_ssp_start - enable mcu
  *
  */
-int jornada_ssp_start()
+void jornada_ssp_start(void)
 {
 	spin_lock_irqsave(&jornada_ssp_lock, jornada_ssp_flags);
 	GPCR = GPIO_GPIO25;
 	udelay(50);
-	return 0;
+	return;
 };
 EXPORT_SYMBOL(jornada_ssp_start);
 
@@ -122,11 +122,11 @@ EXPORT_SYMBOL(jornada_ssp_start);
  * jornada_ssp_end - disable mcu and turn off lock
  *
  */
-int jornada_ssp_end()
+void jornada_ssp_end(void)
 {
 	GPSR = GPIO_GPIO25;
 	spin_unlock_irqrestore(&jornada_ssp_lock, jornada_ssp_flags);
-	return 0;
+	return;
 };
 EXPORT_SYMBOL(jornada_ssp_end);
 

arch/arm/plat-omap/devices.c

@@ -316,19 +316,6 @@ static inline void omap_init_mmc_conf(const struct omap_mmc_config *mmc_conf)
 				omap_cfg_reg(MMC_DAT3);
 			}
 		}
-#if defined(CONFIG_ARCH_OMAP2420)
-		if (mmc_conf->mmc[0].internal_clock) {
-			/*
-			 * Use internal loop-back in MMC/SDIO
-			 * Module Input Clock selection
-			 */
-			if (cpu_is_omap24xx()) {
-				u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-				v |= (1 << 24); /* not used in 243x */
-				omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
-			}
-		}
-#endif
 	}
 
 #ifdef	CONFIG_ARCH_OMAP16XX