Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 e6bf0bf3 编写于 作者: L Linus Torvalds
浏览文件
操作

Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus 

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Fix wreckage after removal of tickadj; convert to GENERIC_TIME.
  [MIPS] DECstation defconfig update
  [MIPS] Fix size of zones_size and zholes_size array
  [MIPS] BCM1480: Mask pending interrupts against c0_status.im.
  [MIPS] SB1250: Interrupt handler fixes
  [MIPS] Remove IT8172-based platforms, ITE 8172G and Globespan IVR support.
  [MIPS] Remove Atlas and SEAD from feature-removal-schedule.
  [MIPS] Remove Jaguar and Ocelot family from feature list.
  [MIPS] BCM1250: TRDY timeout tweaks for Broadcom SiByte systems
  [MIPS] Remove dead DECstation boot code
  [MIPS] Let gcc align 'struct pt_regs' on 8 bytes boundary
上级 9b5a4a67 8db02010
展开全部 隐藏空白更改
内联 并排
Showing with 113 addition and 9048 deletion
Documentation/feature-removal-schedule.txt
浏览文件 @ e6bf0bf3
......@@ -211,42 +211,6 @@ Who: Nick Piggin <npiggin@suse.de>
---------------------------
What: Support for the Momentum / PMC-Sierra Jaguar ATX evaluation board
When: September 2006
Why: Does no longer build since quite some time, and was never popular,
due to the platform being replaced by successor models. Apparently
no user base left. It also is one of the last users of
WANT_PAGE_VIRTUAL.
Who: Ralf Baechle <ralf@linux-mips.org>
---------------------------
What: Support for the Momentum Ocelot, Ocelot 3, Ocelot C and Ocelot G
When: September 2006
Why: Some do no longer build and apparently there is no user base left
for these platforms.
Who: Ralf Baechle <ralf@linux-mips.org>
---------------------------
What: Support for MIPS Technologies' Altas and SEAD evaluation board
When: September 2006
Why: Some do no longer build and apparently there is no user base left
for these platforms. Hardware out of production since several years.
Who: Ralf Baechle <ralf@linux-mips.org>
---------------------------
What: Support for the IT8172-based platforms, ITE 8172G and Globespan IVR
When: September 2006
Why: Code does no longer build since at least 2.6.0, apparently there is
no user base left for these platforms. Hardware out of production
since several years and hardly a trace of the manufacturer left on
the net.
Who: Ralf Baechle <ralf@linux-mips.org>
---------------------------
What: Interrupt only SA_* flags
When: Januar 2007
Why: The interrupt related SA_* flags are replaced by IRQF_* to move them
......
arch/mips/Kconfig
浏览文件 @ e6bf0bf3
......@@ -203,39 +203,6 @@ config MIPS_EV64120
<http://www.marvell.com/>. Say Y here if you wish to build a
kernel for this platform.
config MIPS_IVR
bool "Globespan IVR board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select ITE_BOARD_GEN
select SYS_HAS_CPU_NEVADA
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
select SYS_SUPPORTS_LITTLE_ENDIAN
help
This is an evaluation board built by Globespan to showcase thir
iVR (Internet Video Recorder) design. It utilizes a QED RM5231
R5000 MIPS core. More information can be found out their website
located at <http://www.globespan.net/>. Say Y here if you wish to
build a kernel for this platform.
config MIPS_ITE8172
bool "ITE 8172G board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select ITE_BOARD_GEN
select SYS_HAS_CPU_R5432
select SYS_HAS_CPU_NEVADA
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
select SYS_SUPPORTS_LITTLE_ENDIAN
help
Ths is an evaluation board made by ITE <http://www.ite.com.tw/>
with ATX form factor that utilizes a MIPS R5000 to work with its
ITE8172G companion internet appliance chip. The MIPS core can be
either a NEC Vr5432 or QED RM5231. Say Y here if you wish to build
a kernel for this platform.
config MACH_JAZZ
bool "Jazz family of machines"
select ARC
......@@ -804,7 +771,6 @@ endchoice
source "arch/mips/ddb5xxx/Kconfig"
source "arch/mips/gt64120/ev64120/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/ite-boards/Kconfig"
source "arch/mips/lasat/Kconfig"
source "arch/mips/momentum/Kconfig"
source "arch/mips/pmc-sierra/Kconfig"
......@@ -837,6 +803,10 @@ config GENERIC_CALIBRATE_DELAY
bool
default y
config GENERIC_TIME
bool
default y
config SCHED_NO_NO_OMIT_FRAME_POINTER
bool
default y
......@@ -964,9 +934,6 @@ config MIPS_RM9122
config PCI_MARVELL
bool
config ITE_BOARD_GEN
bool
config SOC_AU1000
bool
select SOC_AU1X00
......@@ -1050,16 +1017,6 @@ config AU1X00_USB_DEVICE
depends on MIPS_PB1500 || MIPS_PB1100 || MIPS_PB1000
default n
config IT8172_CIR
bool
depends on MIPS_ITE8172 || MIPS_IVR
default y
config IT8712
bool
depends on MIPS_ITE8172
default y
config BOOT_ELF32
bool
......
arch/mips/Makefile
浏览文件 @ e6bf0bf3
......@@ -286,19 +286,6 @@ core-$(CONFIG_WR_PPMC) += arch/mips/gt64120/wrppmc/
cflags-$(CONFIG_WR_PPMC) += -Iinclude/asm-mips/mach-wrppmc
load-$(CONFIG_WR_PPMC) += 0xffffffff80100000
#
# Globespan IVR eval board with QED 5231 CPU
#
core-$(CONFIG_ITE_BOARD_GEN) += arch/mips/ite-boards/generic/
core-$(CONFIG_MIPS_IVR) += arch/mips/ite-boards/ivr/
load-$(CONFIG_MIPS_IVR) += 0xffffffff80100000
#
# ITE 8172 eval board with QED 5231 CPU
#
core-$(CONFIG_MIPS_ITE8172) += arch/mips/ite-boards/qed-4n-s01b/
load-$(CONFIG_MIPS_ITE8172) += 0xffffffff80100000
#
# For all MIPS, Inc. eval boards
#
......
arch/mips/configs/decstation_defconfig
浏览文件 @ e6bf0bf3
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.18-rc1
# Thu Jul 6 10:04:01 2006
# Linux kernel version: 2.6.18
# Tue Oct 3 11:57:53 2006
#
CONFIG_MIPS=y
......@@ -167,27 +167,28 @@ CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_RELAY=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
......@@ -205,6 +206,7 @@ CONFIG_KMOD=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
......@@ -231,7 +233,6 @@ CONFIG_MMU=y
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
......@@ -258,9 +259,10 @@ CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_NET_KEY=m
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
......@@ -269,22 +271,37 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=y
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
# CONFIG_IPV6_TUNNEL is not set
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
......@@ -304,14 +321,13 @@ CONFIG_NETWORK_SECMARK=y
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
......@@ -327,13 +343,8 @@ CONFIG_NETWORK_SECMARK=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_WIRELESS_EXT=y
# CONFIG_IEEE80211 is not set
CONFIG_FIB_RULES=y
#
# Device Drivers
......@@ -344,8 +355,6 @@ CONFIG_WIRELESS_EXT=y
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
......@@ -387,8 +396,9 @@ CONFIG_BLK_DEV_LOOP=m
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
......@@ -410,12 +420,13 @@ CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
......@@ -423,9 +434,13 @@ CONFIG_SCSI_SAS_ATTRS=m
CONFIG_ISCSI_TCP=m
CONFIG_SCSI_DECNCR=y
# CONFIG_SCSI_DECSII is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DEBUG is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
#
......@@ -456,18 +471,7 @@ CONFIG_NETDEVICES=y
#
# PHY device support
#
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
......@@ -712,7 +716,12 @@ CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
......@@ -747,11 +756,13 @@ CONFIG_FUSE_FS=m
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_CONFIGFS_FS=y
#
# Miscellaneous filesystems
......@@ -769,7 +780,7 @@ CONFIG_RAMFS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=y
# CONFIG_UFS_FS_WRITE is not set
CONFIG_UFS_FS_WRITE=y
# CONFIG_UFS_DEBUG is not set
#
......@@ -777,24 +788,25 @@ CONFIG_UFS_FS=y
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
CONFIG_GENERIC_ACL=y
#
# Partition Types
......@@ -832,44 +844,29 @@ CONFIG_ULTRIX_PARTITION=y
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_KGDB is not set
# CONFIG_RUNTIME_DEBUG is not set
# CONFIG_MIPS_UNCACHED is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
......@@ -879,9 +876,12 @@ CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
......@@ -903,7 +903,7 @@ CONFIG_CRYPTO_CRC32C=m
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=m
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
......
arch/mips/configs/it8172_defconfig 已删除 100644 → 0
浏览文件 @ 9b5a4a67
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.18-rc1
# Thu Jul 6 10:04:11 2006
#
CONFIG_MIPS=y
#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_MIPS_BOSPORUS is not set
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
# CONFIG_MIPS_PB1550 is not set
# CONFIG_MIPS_PB1200 is not set
# CONFIG_MIPS_DB1000 is not set
# CONFIG_MIPS_DB1100 is not set
# CONFIG_MIPS_DB1500 is not set
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MIPS_IVR is not set
CONFIG_MIPS_ITE8172=y
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_3 is not set
# CONFIG_MOMENCO_OCELOT_C is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SIBYTE_SWARM is not set
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_RHONE is not set
# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_PTSWARM is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_IT8172_REVC is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_ITE_BOARD_GEN=y
CONFIG_IT8172_CIR=y
CONFIG_IT8712=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
# CONFIG_CPU_MIPS32_R1 is not set
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
# CONFIG_CPU_R4300 is not set
# CONFIG_CPU_R4X00 is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
# CONFIG_CPU_R6000 is not set
CONFIG_CPU_NEVADA=y
# CONFIG_CPU_R8000 is not set
# CONFIG_CPU_R10000 is not set
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_SYS_HAS_CPU_R5432=y
CONFIG_SYS_HAS_CPU_NEVADA=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
#
# Kernel type
#
CONFIG_32BIT=y
# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMTC is not set
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_256 is not set
CONFIG_HZ_1000=y
# CONFIG_HZ_1024 is not set
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_HZ=1000
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_RELAY=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
#
# Block layer
#
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# CONFIG_PCI is not set
CONFIG_MMU=y
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_WIRELESS_EXT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
# CONFIG_MTD_PARTITIONS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
# CONFIG_MTD_BLOCK is not set
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0x2000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
#
# NAND Flash Device Drivers
#
# CONFIG_MTD_NAND is not set
#
# OneNAND Flash Device Drivers
#
# CONFIG_MTD_ONENAND is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# I2O device support
#
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# PHY device support
#
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_DM9000 is not set
#
# Ethernet (1000 Mbit)
#
#
# Ethernet (10000 Mbit)
#
#
# Token Ring devices
#
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_LIBPS2 is not set
CONFIG_SERIO_RAW=m
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_QTRONIX_KEYBOARD is not set
# CONFIG_IT8172_SCR0 is not set
# CONFIG_IT8172_SCR1 is not set
# CONFIG_ITE_GPIO is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
#
# Misc devices
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
# CONFIG_SND is not set
#
# Open Sound System
#
CONFIG_SOUND_PRIME=y
CONFIG_SOUND_IT8172=y
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
#
# USB support
#
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
# CONFIG_NLS is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=m
CONFIG_CRC32=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_PLIST=y
arch/mips/configs/ivr_defconfig 已删除 100644 → 0
浏览文件 @ 9b5a4a67
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.18-rc1
# Thu Jul 6 10:04:12 2006
#
CONFIG_MIPS=y
#
# Machine selection
#
# CONFIG_MIPS_MTX1 is not set
# CONFIG_MIPS_BOSPORUS is not set
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
# CONFIG_MIPS_PB1550 is not set
# CONFIG_MIPS_PB1200 is not set
# CONFIG_MIPS_DB1000 is not set
# CONFIG_MIPS_DB1100 is not set
# CONFIG_MIPS_DB1500 is not set
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
CONFIG_MIPS_IVR=y
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_3 is not set
# CONFIG_MOMENCO_OCELOT_C is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_QEMU is not set
# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SIBYTE_SWARM is not set
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_RHONE is not set
# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_PTSWARM is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_ITE_BOARD_GEN=y
CONFIG_IT8172_CIR=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
# CONFIG_CPU_MIPS32_R1 is not set
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_MIPS64_R2 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_VR41XX is not set
# CONFIG_CPU_R4300 is not set
# CONFIG_CPU_R4X00 is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
# CONFIG_CPU_R6000 is not set
CONFIG_CPU_NEVADA=y
# CONFIG_CPU_R8000 is not set
# CONFIG_CPU_R10000 is not set
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_SYS_HAS_CPU_NEVADA=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
#
# Kernel type
#
CONFIG_32BIT=y
# CONFIG_64BIT is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMTC is not set
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_256 is not set
CONFIG_HZ_1000=y
# CONFIG_HZ_1024 is not set
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_HZ=1000
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_RELAY=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
#
# Block layer
#
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_MMU=y
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_WIRELESS_EXT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_IDEPCI is not set
# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_DM9000 is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_LIBPS2 is not set
CONFIG_SERIO_RAW=m
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_QTRONIX_KEYBOARD=y
CONFIG_IT8172_SCR0=y
CONFIG_IT8172_SCR1=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
#
# Misc devices
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
# CONFIG_NLS is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=m
CONFIG_CRC32=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_PLIST=y
arch/mips/dec/boot/Makefile 已删除 100644 → 0
浏览文件 @ 9b5a4a67
#
# Makefile for the DECstation family specific parts of the kernel
#
netboot: all
$(LD) -N -G 0 -T ld.ecoff ../../boot/zImage \
dec_boot.o ramdisk.img -o nbImage
obj-y := decstation.o
clean:
rm -f nbImage
arch/mips/dec/boot/decstation.c 已删除 100644 → 0
浏览文件 @ 9b5a4a67
/*
* arch/mips/dec/decstation.c
*/
#include <asm/sections.h>
#define RELOC
#define INITRD
#define DEBUG_BOOT
/*
* Magic number indicating REX PROM available on DECSTATION.
*/
#define REX_PROM_MAGIC 0x30464354
#define REX_PROM_CLEARCACHE 0x7c/4
#define REX_PROM_PRINTF 0x30/4
#define VEC_RESET 0xBFC00000 /* Prom base address */
#define PMAX_PROM_ENTRY(x) (VEC_RESET+((x)*8)) /* Prom jump table */
#define PMAX_PROM_PRINTF PMAX_PROM_ENTRY(17)
#define PARAM (k_start + 0x2000)
#define LOADER_TYPE (*(unsigned char *) (PARAM+0x210))
#define INITRD_START (*(unsigned long *) (PARAM+0x218))
#define INITRD_SIZE (*(unsigned long *) (PARAM+0x21c))
extern int _ftext; /* begin and end of kernel image */
extern void kernel_entry(int, char **, unsigned long, int *);
void * memcpy(void * dest, const void *src, unsigned int count)
{
unsigned long *tmp = (unsigned long *) dest, *s = (unsigned long *) src;
count >>= 2;
while (count--)
*tmp++ = *s++;
return dest;
}
void dec_entry(int argc, char **argv,
unsigned long magic, int *prom_vec)
{
void (*rex_clear_cache)(void);
int (*prom_printf)(char *, ...);
unsigned long k_start, len;
/*
* The DS5100 leaves cpu with BEV enabled, clear it.
*/
asm( "lui\t$8,0x3000\n\t"
"mtc0\t$8,$12\n\t"
".section\t.sdata\n\t"
".section\t.sbss\n\t"
".section\t.text"
: : : "$8");
#ifdef DEBUG_BOOT
if (magic == REX_PROM_MAGIC) {
prom_printf = (int (*)(char *, ...)) *(prom_vec + REX_PROM_PRINTF);
} else {
prom_printf = (int (*)(char *, ...)) PMAX_PROM_PRINTF;
}
prom_printf("Launching kernel...\n");
#endif
k_start = (unsigned long) (&kernel_entry) & 0xffff0000;
#ifdef RELOC
/*
* Now copy kernel image to its destination.
*/
len = ((unsigned long) (&_end) - k_start);
memcpy((void *)k_start, &_ftext, len);
#endif
if (magic == REX_PROM_MAGIC) {
rex_clear_cache = (void (*)(void)) * (prom_vec + REX_PROM_CLEARCACHE);
rex_clear_cache();
}
kernel_entry(argc, argv, magic, prom_vec);
}
arch/mips/dec/boot/ld.ecoff 已删除 100644 → 0
浏览文件 @ 9b5a4a67
OUTPUT_FORMAT("ecoff-littlemips")
OUTPUT_ARCH(mips)
ENTRY(dec_entry)
SECTIONS
{
. = 0x80200000;
.text :
{
_ftext = .;
*(.text)
*(.fixup)
}
.rdata :
{
*(.rodata .rodata.* .rdata)
}
.data :
{
. = ALIGN(0x1000);
ramdisk.img (.data)
*(.data)
}
.sdata :
{
*(.sdata)
}
_gp = .;
.sbss :
{
*(.sbss)
*(.scommon)
}
.bss :
{
*(.dynbss)
*(.bss)
*(COMMON)
}
/DISCARD/ : {
*(.reginfo .mdebug .note)
}
}
arch/mips/dec/time.c
浏览文件 @ e6bf0bf3
......@@ -184,8 +184,6 @@ void __init dec_time_init(void)
CMOS_WRITE(RTC_REF_CLCK_32KHZ | (16 - __ffs(HZ)), RTC_REG_A);
}
EXPORT_SYMBOL(do_settimeofday);
void __init plat_timer_setup(struct irqaction *irq)
{
setup_irq(dec_interrupt[DEC_IRQ_RTC], irq);
......
arch/mips/ite-boards/Kconfig 已删除 100644 → 0
浏览文件 @ 9b5a4a67
config IT8172_REVC
bool "Support for older IT8172 (Rev C)"
depends on MIPS_ITE8172
help
Say Y here to support the older, Revision C version of the Integrated
Technology Express, Inc. ITE8172 SBC. Vendor page at
<http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
board at <http://www.mvista.com/partners/semiconductor/ite.html>.
arch/mips/ite-boards/generic/Makefile 已删除 100644 → 0
浏览文件 @ 9b5a4a67
#
# Copyright 2000 MontaVista Software Inc.
# Author: MontaVista Software, Inc.
# ppopov@mvista.com or source@mvista.com
#
# Makefile for the ITE 8172 (qed-4n-s01b) board, generic files.
#
obj-y += it8172_setup.o irq.o pmon_prom.o \
time.o lpc.o puts.o reset.o
obj-$(CONFIG_IT8172_CIR)+= it8172_cir.o
obj-$(CONFIG_KGDB) += dbg_io.o
EXTRA_AFLAGS := $(CFLAGS)
arch/mips/ite-boards/generic/dbg_io.c 已删除 100644 → 0
浏览文件 @ 9b5a4a67
#ifdef CONFIG_KGDB
/* --- CONFIG --- */
/* we need uint32 uint8 */
/* #include "types.h" */
typedef unsigned char uint8;
typedef unsigned int uint32;
/* --- END OF CONFIG --- */
#define UART16550_BAUD_2400 2400
#define UART16550_BAUD_4800 4800
#define UART16550_BAUD_9600 9600
#define UART16550_BAUD_19200 19200
#define UART16550_BAUD_38400 38400
#define UART16550_BAUD_57600 57600
#define UART16550_BAUD_115200 115200
#define UART16550_PARITY_NONE 0
#define UART16550_PARITY_ODD 0x08
#define UART16550_PARITY_EVEN 0x18
#define UART16550_PARITY_MARK 0x28
#define UART16550_PARITY_SPACE 0x38
#define UART16550_DATA_5BIT 0x0
#define UART16550_DATA_6BIT 0x1
#define UART16550_DATA_7BIT 0x2
#define UART16550_DATA_8BIT 0x3
#define UART16550_STOP_1BIT 0x0
#define UART16550_STOP_2BIT 0x4
/* ----------------------------------------------------- */
/* === CONFIG === */
/* [stevel] we use the IT8712 serial port for kgdb */
#define DEBUG_BASE 0xB40003F8 /* 8712 serial port 1 base address */
#define MAX_BAUD 115200
/* === END OF CONFIG === */
/* register offset */
#define OFS_RCV_BUFFER 0
#define OFS_TRANS_HOLD 0
#define OFS_SEND_BUFFER 0
#define OFS_INTR_ENABLE 1
#define OFS_INTR_ID 2
#define OFS_DATA_FORMAT 3
#define OFS_LINE_CONTROL 3
#define OFS_MODEM_CONTROL 4
#define OFS_RS232_OUTPUT 4
#define OFS_LINE_STATUS 5
#define OFS_MODEM_STATUS 6
#define OFS_RS232_INPUT 6
#define OFS_SCRATCH_PAD 7
#define OFS_DIVISOR_LSB 0
#define OFS_DIVISOR_MSB 1
/* memory-mapped read/write of the port */
#define UART16550_READ(y) (*((volatile uint8*)(DEBUG_BASE + y)))
#define UART16550_WRITE(y,z) ((*((volatile uint8*)(DEBUG_BASE + y))) = z)
void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
{
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
/* set up baud rate */
{
uint32 divisor;
/* set DIAB bit */
UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
/* set divisor */
divisor = MAX_BAUD / baud;
UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
/* clear DIAB bit */
UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
}
/* set data format */
UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
}
static int remoteDebugInitialized = 0;
uint8 getDebugChar(void)
{
if (!remoteDebugInitialized) {
remoteDebugInitialized = 1;
debugInit(UART16550_BAUD_115200,
UART16550_DATA_8BIT,
UART16550_PARITY_NONE, UART16550_STOP_1BIT);
}
while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
return UART16550_READ(OFS_RCV_BUFFER);
}
int putDebugChar(uint8 byte)
{
if (!remoteDebugInitialized) {
remoteDebugInitialized = 1;
debugInit(UART16550_BAUD_115200,
UART16550_DATA_8BIT,
UART16550_PARITY_NONE, UART16550_STOP_1BIT);
}
while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0);
UART16550_WRITE(OFS_SEND_BUFFER, byte);
return 1;
}
#endif
arch/mips/ite-boards/generic/irq.c 已删除 100644 → 0
浏览文件 @ 9b5a4a67
/*
* BRIEF MODULE DESCRIPTION
* ITE 8172G interrupt/setup routines.
*
* Copyright 2000,2001 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
*
* Part of this file was derived from Carsten Langgaard's
* arch/mips/mips-boards/atlas/atlas_int.c.
*
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/kernel_stat.h>
#include <linux/module.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/timex.h>
#include <linux/slab.h>
#include <linux/random.h>
#include <linux/serial_reg.h>
#include <linux/bitops.h>
#include <asm/bootinfo.h>
#include <asm/io.h>
#include <asm/mipsregs.h>
#include <asm/system.h>
#include <asm/it8172/it8172.h>
#include <asm/it8172/it8172_int.h>
#include <asm/it8172/it8172_dbg.h>
/* revisit */
#define EXT_IRQ0_TO_IP 2 /* IP 2 */
#define EXT_IRQ5_TO_IP 7 /* IP 7 */
#define ALLINTS_NOTIMER (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4)
extern void set_debug_traps(void);
extern void mips_timer_interrupt(int irq, struct pt_regs *regs);
struct it8172_intc_regs volatile *it8172_hw0_icregs =
(struct it8172_intc_regs volatile *)(KSEG1ADDR(IT8172_PCI_IO_BASE + IT_INTC_BASE));
static void disable_it8172_irq(unsigned int irq_nr)
{
if ( (irq_nr >= IT8172_LPC_IRQ_BASE) && (irq_nr <= IT8172_SERIRQ_15)) {
/* LPC interrupt */
it8172_hw0_icregs->lpc_mask |=
(1 << (irq_nr - IT8172_LPC_IRQ_BASE));
} else if ( (irq_nr >= IT8172_LB_IRQ_BASE) && (irq_nr <= IT8172_IOCHK_IRQ)) {
/* Local Bus interrupt */
it8172_hw0_icregs->lb_mask |=
(1 << (irq_nr - IT8172_LB_IRQ_BASE));
} else if ( (irq_nr >= IT8172_PCI_DEV_IRQ_BASE) && (irq_nr <= IT8172_DMA_IRQ)) {
/* PCI and other interrupts */
it8172_hw0_icregs->pci_mask |=
(1 << (irq_nr - IT8172_PCI_DEV_IRQ_BASE));
} else if ( (irq_nr >= IT8172_NMI_IRQ_BASE) && (irq_nr <= IT8172_POWER_NMI_IRQ)) {
/* NMI interrupts */
it8172_hw0_icregs->nmi_mask |=
(1 << (irq_nr - IT8172_NMI_IRQ_BASE));
} else {
panic("disable_it8172_irq: bad irq %d", irq_nr);
}
}
static void enable_it8172_irq(unsigned int irq_nr)
{
if ( (irq_nr >= IT8172_LPC_IRQ_BASE) && (irq_nr <= IT8172_SERIRQ_15)) {
/* LPC interrupt */
it8172_hw0_icregs->lpc_mask &=
~(1 << (irq_nr - IT8172_LPC_IRQ_BASE));
}
else if ( (irq_nr >= IT8172_LB_IRQ_BASE) && (irq_nr <= IT8172_IOCHK_IRQ)) {
/* Local Bus interrupt */
it8172_hw0_icregs->lb_mask &=
~(1 << (irq_nr - IT8172_LB_IRQ_BASE));
}
else if ( (irq_nr >= IT8172_PCI_DEV_IRQ_BASE) && (irq_nr <= IT8172_DMA_IRQ)) {
/* PCI and other interrupts */
it8172_hw0_icregs->pci_mask &=
~(1 << (irq_nr - IT8172_PCI_DEV_IRQ_BASE));
}
else if ( (irq_nr >= IT8172_NMI_IRQ_BASE) && (irq_nr <= IT8172_POWER_NMI_IRQ)) {
/* NMI interrupts */
it8172_hw0_icregs->nmi_mask &=
~(1 << (irq_nr - IT8172_NMI_IRQ_BASE));
}
else {
panic("enable_it8172_irq: bad irq %d", irq_nr);
}
}
static unsigned int startup_ite_irq(unsigned int irq)
{
enable_it8172_irq(irq);
return 0;
}
#define shutdown_ite_irq disable_it8172_irq
#define mask_and_ack_ite_irq disable_it8172_irq
static void end_ite_irq(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
enable_it8172_irq(irq);
}
static struct irq_chip it8172_irq_type = {
.typename = "ITE8172",
.startup = startup_ite_irq,
.shutdown = shutdown_ite_irq,
.enable = enable_it8172_irq,
.disable = disable_it8172_irq,
.ack = mask_and_ack_ite_irq,
.end = end_ite_irq,
};
static void enable_none(unsigned int irq) { }
static unsigned int startup_none(unsigned int irq) { return 0; }
static void disable_none(unsigned int irq) { }
static void ack_none(unsigned int irq) { }
/* startup is the same as "enable", shutdown is same as "disable" */
#define shutdown_none disable_none
#define end_none enable_none
static struct irq_chip cp0_irq_type = {
.typename = "CP0 Count",
.startup = startup_none,
.shutdown = shutdown_none,
.enable = enable_none,
.disable = disable_none,
.ack = ack_none,
.end = end_none
};
void enable_cpu_timer(void)
{
unsigned long flags;
local_irq_save(flags);
set_c0_status(0x100 << EXT_IRQ5_TO_IP);
local_irq_restore(flags);
}
void __init arch_init_irq(void)
{
int i;
unsigned long flags;
/* mask all interrupts */
it8172_hw0_icregs->lb_mask = 0xffff;
it8172_hw0_icregs->lpc_mask = 0xffff;
it8172_hw0_icregs->pci_mask = 0xffff;
it8172_hw0_icregs->nmi_mask = 0xffff;
/* make all interrupts level triggered */
it8172_hw0_icregs->lb_trigger = 0;
it8172_hw0_icregs->lpc_trigger = 0;
it8172_hw0_icregs->pci_trigger = 0;
it8172_hw0_icregs->nmi_trigger = 0;
/* active level setting */
/* uart, keyboard, and mouse are active high */
it8172_hw0_icregs->lpc_level = (0x10 | 0x2 | 0x1000);
it8172_hw0_icregs->lb_level |= 0x20;
/* keyboard and mouse are edge triggered */
it8172_hw0_icregs->lpc_trigger |= (0x2 | 0x1000);
#if 0
// Enable this piece of code to make internal USB interrupt
// edge triggered.
it8172_hw0_icregs->pci_trigger |=
(1 << (IT8172_USB_IRQ - IT8172_PCI_DEV_IRQ_BASE));
it8172_hw0_icregs->pci_level &=
~(1 << (IT8172_USB_IRQ - IT8172_PCI_DEV_IRQ_BASE));
#endif
for (i = 0; i <= IT8172_LAST_IRQ; i++) {
irq_desc[i].chip = &it8172_irq_type;
spin_lock_init(&irq_desc[i].lock);
}
irq_desc[MIPS_CPU_TIMER_IRQ].chip = &cp0_irq_type;
set_c0_status(ALLINTS_NOTIMER);
}
void mips_spurious_interrupt(struct pt_regs *regs)
{
#if 1
return;
#else
unsigned long status, cause;
printk("got spurious interrupt\n");
status = read_c0_status();
cause = read_c0_cause();
printk("status %x cause %x\n", status, cause);
printk("epc %x badvaddr %x \n", regs->cp0_epc, regs->cp0_badvaddr);
#endif
}
void it8172_hw0_irqdispatch(struct pt_regs *regs)
{
int irq;
unsigned short intstatus = 0, status = 0;
intstatus = it8172_hw0_icregs->intstatus;
if (intstatus & 0x8) {
panic("Got NMI interrupt");
} else if (intstatus & 0x4) {
/* PCI interrupt */
irq = 0;
status |= it8172_hw0_icregs->pci_req;
while (!(status & 0x1)) {
irq++;
status >>= 1;
}
irq += IT8172_PCI_DEV_IRQ_BASE;
} else if (intstatus & 0x1) {
/* Local Bus interrupt */
irq = 0;
status |= it8172_hw0_icregs->lb_req;
while (!(status & 0x1)) {
irq++;
status >>= 1;
}
irq += IT8172_LB_IRQ_BASE;
} else if (intstatus & 0x2) {
/* LPC interrupt */
/* Since some lpc interrupts are edge triggered,
* we could lose an interrupt this way because
* we acknowledge all ints at onces. Revisit.
*/
status |= it8172_hw0_icregs->lpc_req;
it8172_hw0_icregs->lpc_req = 0; /* acknowledge ints */
irq = 0;
while (!(status & 0x1)) {
irq++;
status >>= 1;
}
irq += IT8172_LPC_IRQ_BASE;
} else
return;
do_IRQ(irq, regs);
}
asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
{
unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
if (!pending)
mips_spurious_interrupt(regs);
else if (pending & CAUSEF_IP7)
ll_timer_interrupt(127, regs);
else if (pending & CAUSEF_IP2)
it8172_hw0_irqdispatch(regs);
}
void show_pending_irqs(void)
{
fputs("intstatus: ");
put32(it8172_hw0_icregs->intstatus);
puts("");
fputs("pci_req: ");
put32(it8172_hw0_icregs->pci_req);
puts("");
fputs("lb_req: ");
put32(it8172_hw0_icregs->lb_req);
puts("");
fputs("lpc_req: ");
put32(it8172_hw0_icregs->lpc_req);
puts("");
}
arch/mips/ite-boards/generic/it8172_cir.c 已删除 100644 → 0
浏览文件 @ 9b5a4a67
/*
*
* BRIEF MODULE DESCRIPTION
* IT8172 Consumer IR port generic routines.
*
* Copyright 2001 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifdef CONFIG_IT8172_CIR
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/it8172/it8172.h>
#include <asm/it8172/it8172_cir.h>
volatile struct it8172_cir_regs *cir_regs[NUM_CIR_PORTS] = {
(volatile struct it8172_cir_regs *)(KSEG1ADDR(IT8172_PCI_IO_BASE + IT_CIR0_BASE)),
(volatile struct it8172_cir_regs *)(KSEG1ADDR(IT8172_PCI_IO_BASE + IT_CIR1_BASE))};
/*
* Initialize Consumer IR Port.
*/
int cir_port_init(struct cir_port *cir)
{
int port = cir->port;
unsigned char data;
/* set baud rate */
cir_regs[port]->bdlr = cir->baud_rate & 0xff;
cir_regs[port]->bdhr = (cir->baud_rate >> 8) & 0xff;
/* set receiver control register */
cir_regs[port]->rcr = (CIR_SET_RDWOS(cir->rdwos) | CIR_SET_RXDCR(cir->rxdcr));
/* set carrier frequency register */
cir_regs[port]->cfr = (CIR_SET_CF(cir->cfq) | CIR_SET_HS(cir->hcfs));
/* set fifo threshold */
data = cir_regs[port]->mstcr & 0xf3;
data |= CIR_SET_FIFO_TL(cir->fifo_tl);
cir_regs[port]->mstcr = data;
clear_fifo(cir);
enable_receiver(cir);
disable_rx_demodulation(cir);
set_rx_active(cir);
int_enable(cir);
rx_int_enable(cir);
return 0;
}
void clear_fifo(struct cir_port *cir)
{
cir_regs[cir->port]->mstcr |= CIR_FIFO_CLEAR;
}
void enable_receiver(struct cir_port *cir)
{
cir_regs[cir->port]->rcr |= CIR_RXEN;
}
void disable_receiver(struct cir_port *cir)
{
cir_regs[cir->port]->rcr &= ~CIR_RXEN;
}
void enable_rx_demodulation(struct cir_port *cir)
{
cir_regs[cir->port]->rcr |= CIR_RXEND;
}
void disable_rx_demodulation(struct cir_port *cir)
{
cir_regs[cir->port]->rcr &= ~CIR_RXEND;
}
void set_rx_active(struct cir_port *cir)
{
cir_regs[cir->port]->rcr |= CIR_RXACT;
}
void int_enable(struct cir_port *cir)
{
cir_regs[cir->port]->ier |= CIR_IEC;
}
void rx_int_enable(struct cir_port *cir)
{
cir_regs[cir->port]->ier |= CIR_RDAIE;
}
void dump_regs(struct cir_port *cir)
{
printk("mstcr %x ier %x iir %x cfr %x rcr %x tcr %x tfsr %x rfsr %x\n",
cir_regs[cir->port]->mstcr,
cir_regs[cir->port]->ier,
cir_regs[cir->port]->iir,
cir_regs[cir->port]->cfr,
cir_regs[cir->port]->rcr,
cir_regs[cir->port]->tcr,
cir_regs[cir->port]->tfsr,
cir_regs[cir->port]->rfsr);
while (cir_regs[cir->port]->iir & CIR_RDAI) {
printk("data %x\n", cir_regs[cir->port]->dr);
}
}
void dump_reg_addr(struct cir_port *cir)
{
printk("dr %x mstcr %x ier %x iir %x cfr %x rcr %x tcr %x bdlr %x bdhr %x tfsr %x rfsr %x\n",
(unsigned)&cir_regs[cir->port]->dr,
(unsigned)&cir_regs[cir->port]->mstcr,
(unsigned)&cir_regs[cir->port]->ier,
(unsigned)&cir_regs[cir->port]->iir,
(unsigned)&cir_regs[cir->port]->cfr,
(unsigned)&cir_regs[cir->port]->rcr,
(unsigned)&cir_regs[cir->port]->tcr,
(unsigned)&cir_regs[cir->port]->bdlr,
(unsigned)&cir_regs[cir->port]->bdhr,
(unsigned)&cir_regs[cir->port]->tfsr,
(unsigned)&cir_regs[cir->port]->rfsr);
}
int cir_get_rx_count(struct cir_port *cir)
{
return cir_regs[cir->port]->rfsr & CIR_RXFBC_MASK;
}
char cir_read_data(struct cir_port *cir)
{
return cir_regs[cir->port]->dr;
}
char get_int_status(struct cir_port *cir)
{
return cir_regs[cir->port]->iir;
}
#endif
arch/mips/ite-boards/generic/it8172_setup.c 已删除 100644 → 0
浏览文件 @ 9b5a4a67
/*
* BRIEF MODULE DESCRIPTION
* IT8172/QED5231 board setup.
*
* Copyright 2000 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/serial_reg.h>
#include <linux/major.h>
#include <linux/kdev_t.h>
#include <linux/root_dev.h>
#include <linux/pm.h>
#include <asm/cpu.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
#include <asm/mipsregs.h>
#include <asm/reboot.h>
#include <asm/traps.h>
#include <asm/it8172/it8172.h>
#include <asm/it8712.h>
extern struct resource ioport_resource;
#ifdef CONFIG_SERIO_I8042
int init_8712_keyboard(void);
#endif
extern int SearchIT8712(void);
extern void InitLPCInterface(void);
extern char * __init prom_getcmdline(void);
extern void it8172_restart(char *command);
extern void it8172_halt(void);
extern void it8172_power_off(void);
extern void it8172_time_init(void);
#ifdef CONFIG_IT8172_REVC
struct {
struct resource ram;
struct resource pci_mem;
struct resource pci_io;
struct resource flash;
struct resource boot;
} it8172_resources = {
{
.start = 0, /* to be initted */
.end = 0,
.name = "RAM",
.flags = IORESOURCE_MEM
}, {
.start = 0x10000000,
.end = 0x13FFFFFF,
.name = "PCI Mem",
.flags = IORESOURCE_MEM
}, {
.start = 0x14000000,
.end = 0x17FFFFFF
.name = "PCI I/O",
}, {
.start = 0x08000000,
.end = 0x0CFFFFFF
.name = "Flash",
}, {
.start = 0x1FC00000,
.end = 0x1FFFFFFF
.name = "Boot ROM",
}
};
#else
struct {
struct resource ram;
struct resource pci_mem0;
struct resource pci_mem1;
struct resource pci_io;
struct resource pci_mem2;
struct resource pci_mem3;
struct resource flash;
struct resource boot;
} it8172_resources = {
{
.start = 0, /* to be initted */
.end = 0,
.name = "RAM",
.flags = IORESOURCE_MEM
}, {
.start = 0x0C000000,
.end = 0x0FFFFFFF,
.name = "PCI Mem0",
.flags = IORESOURCE_MEM
}, {
.start = 0x10000000,
.end = 0x13FFFFFF,
.name = "PCI Mem1",
.flags = IORESOURCE_MEM
}, {
.start = 0x14000000,
.end = 0x17FFFFFF
.name = "PCI I/O",
}, {
.start = 0x1A000000,
.end = 0x1BFFFFFF,
.name = "PCI Mem2",
.flags = IORESOURCE_MEM
}, {
.start = 0x1C000000,
.end = 0x1FBFFFFF,
.name = "PCI Mem3",
.flags = IORESOURCE_MEM
}, {
.start = 0x08000000,
.end = 0x0CFFFFFF
.name = "Flash",
}, {
.start = 0x1FC00000,
.end = 0x1FFFFFFF
.name = "Boot ROM",
}
};
#endif
void __init it8172_init_ram_resource(unsigned long memsize)
{
it8172_resources.ram.end = memsize;
}
void __init plat_mem_setup(void)
{
unsigned short dsr;
char *argptr;
argptr = prom_getcmdline();
#ifdef CONFIG_SERIAL_CONSOLE
if ((argptr = strstr(argptr, "console=")) == NULL) {
argptr = prom_getcmdline();
strcat(argptr, " console=ttyS0,115200");
}
#endif
clear_c0_status(ST0_FR);
board_time_init = it8172_time_init;
_machine_restart = it8172_restart;
_machine_halt = it8172_halt;
pm_power_off = it8172_power_off;
/*
* IO/MEM resources.
*
* revisit this area.
*/
set_io_port_base(KSEG1);
ioport_resource.start = it8172_resources.pci_io.start;
ioport_resource.end = it8172_resources.pci_io.end;
#ifdef CONFIG_IT8172_REVC
iomem_resource.start = it8172_resources.pci_mem.start;
iomem_resource.end = it8172_resources.pci_mem.end;
#else
iomem_resource.start = it8172_resources.pci_mem0.start;
iomem_resource.end = it8172_resources.pci_mem3.end;
#endif
#ifdef CONFIG_BLK_DEV_INITRD
ROOT_DEV = Root_RAM0;
#endif
/*
* Pull enabled devices out of standby
*/
IT_IO_READ16(IT_PM_DSR, dsr);
/*
* Fixme: This breaks when these drivers are modules!!!
*/
#ifdef CONFIG_SOUND_IT8172
dsr &= ~IT_PM_DSR_ACSB;
#else
dsr |= IT_PM_DSR_ACSB;
#endif
#ifdef CONFIG_BLK_DEV_IT8172
dsr &= ~IT_PM_DSR_IDESB;
#else
dsr |= IT_PM_DSR_IDESB;
#endif
IT_IO_WRITE16(IT_PM_DSR, dsr);
InitLPCInterface();
#ifdef CONFIG_MIPS_ITE8172
if (SearchIT8712()) {
printk("Found IT8712 Super IO\n");
/* enable IT8712 serial port */
LPCSetConfig(LDN_SERIAL1, 0x30, 0x01); /* enable */
LPCSetConfig(LDN_SERIAL1, 0x23, 0x01); /* clock selection */
#ifdef CONFIG_SERIO_I8042
if (init_8712_keyboard()) {
printk("Unable to initialize keyboard\n");
LPCSetConfig(LDN_KEYBOARD, 0x30, 0x0); /* disable keyboard */
} else {
LPCSetConfig(LDN_KEYBOARD, 0x30, 0x1); /* enable keyboard */
LPCSetConfig(LDN_KEYBOARD, 0xf0, 0x2);
LPCSetConfig(LDN_KEYBOARD, 0x71, 0x3);
LPCSetConfig(LDN_MOUSE, 0x30, 0x1); /* enable mouse */
LPCSetConfig(0x4, 0x30, 0x1);
LPCSetConfig(0x4, 0xf4, LPCGetConfig(0x4, 0xf4) | 0x80);
if ((LPCGetConfig(LDN_KEYBOARD, 0x30) == 0) ||
(LPCGetConfig(LDN_MOUSE, 0x30) == 0))
printk("Error: keyboard or mouse not enabled\n");
}
#endif
}
else {
printk("IT8712 Super IO not found\n");
}
#endif
#ifdef CONFIG_IT8172_CIR
{
unsigned long data;
//printk("Enabling CIR0\n");
IT_IO_READ16(IT_PM_DSR, data);
data &= ~IT_PM_DSR_CIR0SB;
IT_IO_WRITE16(IT_PM_DSR, data);
//printk("DSR register: %x\n", (unsigned)IT_IO_READ16(IT_PM_DSR, data));
}
#endif
#ifdef CONFIG_IT8172_SCR0
{
unsigned i;
/* Enable Smart Card Reader 0 */
/* First power it up */
IT_IO_READ16(IT_PM_DSR, i);
i &= ~IT_PM_DSR_SCR0SB;
IT_IO_WRITE16(IT_PM_DSR, i);
/* Then initialize its registers */
outb(( IT_SCR_SFR_GATE_UART_OFF << IT_SCR_SFR_GATE_UART_BIT
|IT_SCR_SFR_FET_CHARGE_213_US << IT_SCR_SFR_FET_CHARGE_BIT
|IT_SCR_SFR_CARD_FREQ_3_5_MHZ << IT_SCR_SFR_CARD_FREQ_BIT
|IT_SCR_SFR_FET_ACTIVE_INVERT << IT_SCR_SFR_FET_ACTIVE_BIT
|IT_SCR_SFR_ENABLE_ON << IT_SCR_SFR_ENABLE_BIT),
IT8172_PCI_IO_BASE + IT_SCR0_BASE + IT_SCR_SFR);
outb(IT_SCR_SCDR_RESET_MODE_ASYNC << IT_SCR_SCDR_RESET_MODE_BIT,
IT8172_PCI_IO_BASE + IT_SCR0_BASE + IT_SCR_SCDR);
}
#endif /* CONFIG_IT8172_SCR0 */
#ifdef CONFIG_IT8172_SCR1
{
unsigned i;
/* Enable Smart Card Reader 1 */
/* First power it up */
IT_IO_READ16(IT_PM_DSR, i);
i &= ~IT_PM_DSR_SCR1SB;
IT_IO_WRITE16(IT_PM_DSR, i);
/* Then initialize its registers */
outb(( IT_SCR_SFR_GATE_UART_OFF << IT_SCR_SFR_GATE_UART_BIT
|IT_SCR_SFR_FET_CHARGE_213_US << IT_SCR_SFR_FET_CHARGE_BIT
|IT_SCR_SFR_CARD_FREQ_3_5_MHZ << IT_SCR_SFR_CARD_FREQ_BIT
|IT_SCR_SFR_FET_ACTIVE_INVERT << IT_SCR_SFR_FET_ACTIVE_BIT
|IT_SCR_SFR_ENABLE_ON << IT_SCR_SFR_ENABLE_BIT),
IT8172_PCI_IO_BASE + IT_SCR1_BASE + IT_SCR_SFR);
outb(IT_SCR_SCDR_RESET_MODE_ASYNC << IT_SCR_SCDR_RESET_MODE_BIT,
IT8172_PCI_IO_BASE + IT_SCR1_BASE + IT_SCR_SCDR);
}
#endif /* CONFIG_IT8172_SCR1 */
}
#ifdef CONFIG_SERIO_I8042
/*
* According to the ITE Special BIOS Note for waking up the
* keyboard controller...
*/
static int init_8712_keyboard(void)
{
unsigned int cmd_port = 0x14000064;
unsigned int data_port = 0x14000060;
^^^^^^^^^^^
Somebody here doesn't grok the concept of io ports.
unsigned char data;
int i;
outb(0xaa, cmd_port); /* send self-test cmd */
i = 0;
while (!(inb(cmd_port) & 0x1)) { /* wait output buffer full */
i++;
if (i > 0xffffff)
return 1;
}
data = inb(data_port);
outb(0xcb, cmd_port); /* set ps2 mode */
while (inb(cmd_port) & 0x2) { /* wait while input buffer full */
i++;
if (i > 0xffffff)
return 1;
}
outb(0x01, data_port);
while (inb(cmd_port) & 0x2) { /* wait while input buffer full */
i++;
if (i > 0xffffff)
return 1;
}
outb(0x60, cmd_port); /* write 8042 command byte */
while (inb(cmd_port) & 0x2) { /* wait while input buffer full */
i++;
if (i > 0xffffff)
return 1;
}
outb(0x45, data_port); /* at interface, keyboard enabled, system flag */
while (inb(cmd_port) & 0x2) { /* wait while input buffer full */
i++;
if (i > 0xffffff)
return 1;
}
outb(0xae, cmd_port); /* enable interface */
return 0;
}
#endif
arch/mips/ite-boards/generic/lpc.c 已删除 100644 → 0
浏览文件 @ 9b5a4a67
/*
*
* BRIEF MODULE DESCRIPTION
* ITE Semi IT8712 Super I/O functions.
*
* Copyright 2001 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <asm/io.h>
#include <asm/types.h>
#include <asm/it8712.h>
#include <asm/it8172/it8172.h>
#ifndef TRUE
#define TRUE 1
#endif
#ifndef FALSE
#define FALSE 0
#endif
void LPCEnterMBPnP(void)
{
int i;
unsigned char key[4] = {0x87, 0x01, 0x55, 0x55};
for (i = 0; i<4; i++)
outb(key[i], LPC_KEY_ADDR);
}
void LPCExitMBPnP(void)
{
outb(0x02, LPC_KEY_ADDR);
outb(0x02, LPC_DATA_ADDR);
}
void LPCSetConfig(char LdnNumber, char Index, char data)
{
LPCEnterMBPnP(); // Enter IT8712 MB PnP mode
outb(0x07, LPC_KEY_ADDR);
outb(LdnNumber, LPC_DATA_ADDR);
outb(Index, LPC_KEY_ADDR);
outb(data, LPC_DATA_ADDR);
LPCExitMBPnP();
}
char LPCGetConfig(char LdnNumber, char Index)
{
char rtn;
LPCEnterMBPnP(); // Enter IT8712 MB PnP mode
outb(0x07, LPC_KEY_ADDR);
outb(LdnNumber, LPC_DATA_ADDR);
outb(Index, LPC_KEY_ADDR);
rtn = inb(LPC_DATA_ADDR);
LPCExitMBPnP();
return rtn;
}
int SearchIT8712(void)
{
unsigned char Id1, Id2;
unsigned short Id;
LPCEnterMBPnP();
outb(0x20, LPC_KEY_ADDR); /* chip id byte 1 */
Id1 = inb(LPC_DATA_ADDR);
outb(0x21, LPC_KEY_ADDR); /* chip id byte 2 */
Id2 = inb(LPC_DATA_ADDR);
Id = (Id1 << 8) | Id2;
LPCExitMBPnP();
if (Id == 0x8712)
return TRUE;
else
return FALSE;
}
void InitLPCInterface(void)
{
unsigned char bus, dev_fn;
unsigned long data;
bus = 0;
dev_fn = 1<<3 | 4;
/* pci cmd, SERR# Enable */
IT_WRITE(IT_CONFADDR,
(bus << IT_BUSNUM_SHF) |
(dev_fn << IT_FUNCNUM_SHF) |
((0x4 / 4) << IT_REGNUM_SHF));
IT_READ(IT_CONFDATA, data);
data |= 0x0100;
IT_WRITE(IT_CONFADDR,
(bus << IT_BUSNUM_SHF) |
(dev_fn << IT_FUNCNUM_SHF) |
((0x4 / 4) << IT_REGNUM_SHF));
IT_WRITE(IT_CONFDATA, data);
/* setup serial irq control register */
IT_WRITE(IT_CONFADDR,
(bus << IT_BUSNUM_SHF) |
(dev_fn << IT_FUNCNUM_SHF) |
((0x48 / 4) << IT_REGNUM_SHF));
IT_READ(IT_CONFDATA, data);
data = (data & 0xffff00ff) | 0xc400;
IT_WRITE(IT_CONFADDR,
(bus << IT_BUSNUM_SHF) |
(dev_fn << IT_FUNCNUM_SHF) |
((0x48 / 4) << IT_REGNUM_SHF));
IT_WRITE(IT_CONFDATA, data);
/* Enable I/O Space Subtractive Decode */
/* default 0x4C is 0x3f220000 */
IT_WRITE(IT_CONFADDR,
(bus << IT_BUSNUM_SHF) |
(dev_fn << IT_FUNCNUM_SHF) |
((0x4C / 4) << IT_REGNUM_SHF));
IT_WRITE(IT_CONFDATA, 0x3f2200f3);
}
arch/mips/ite-boards/generic/pmon_prom.c 已删除 100644 → 0
浏览文件 @ 9b5a4a67
/*
*
* BRIEF MODULE DESCRIPTION
* PROM library initialisation code, assuming a version of
* pmon is the boot code.
*
* Copyright 2000 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
*
* This file was derived from Carsten Langgaard's
* arch/mips/mips-boards/xx files.
*
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/string.h>
#include <asm/bootinfo.h>
extern int prom_argc;
extern char **prom_argv, **prom_envp;
typedef struct
{
char *name;
/* char *val; */
}t_env_var;
char * __init prom_getcmdline(void)
{
return &(arcs_cmdline[0]);
}
void __init prom_init_cmdline(void)
{
char *cp;
int actr;
actr = 1; /* Always ignore argv[0] */
cp = &(arcs_cmdline[0]);
while(actr < prom_argc) {
strcpy(cp, prom_argv[actr]);
cp += strlen(prom_argv[actr]);
*cp++ = ' ';
actr++;
}
if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
--cp;
*cp = '\0';
}
char *prom_getenv(char *envname)
{
/*
* Return a pointer to the given environment variable.
* Environment variables are stored in the form of "memsize=64".
*/
t_env_var *env = (t_env_var *)prom_envp;
int i;
i = strlen(envname);
while(env->name) {
if(strncmp(envname, env->name, i) == 0) {
return(env->name + strlen(envname) + 1);
}
env++;
}
return(NULL);
}
static inline unsigned char str2hexnum(unsigned char c)
{
if(c >= '0' && c <= '9')
return c - '0';
if(c >= 'a' && c <= 'f')
return c - 'a' + 10;
return 0; /* foo */
}
unsigned long __init prom_free_prom_memory(void)
{
return 0;
}
unsigned long __init prom_get_memsize(void)
{
char *memsize_str;
unsigned int memsize;
memsize_str = prom_getenv("memsize");
if (!memsize_str) {
#ifdef CONFIG_MIPS_ITE8172
memsize = 32;
#elif defined(CONFIG_MIPS_IVR)
memsize = 64;
#else
memsize = 8;
#endif
printk("memsize unknown: setting to %dMB\n", memsize);
} else {
printk("memsize: %s\n", memsize_str);
memsize = simple_strtol(memsize_str, NULL, 0);
}
return memsize;
}
arch/mips/ite-boards/generic/puts.c 已删除 100644 → 0
浏览文件 @ 9b5a4a67
/*
*
* BRIEF MODULE DESCRIPTION
* Low level uart routines to directly access a 16550 uart.
*
* Copyright 2000,2001 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/types.h>
#define SERIAL_BASE 0xB4011800 /* it8172 */
#define SER_CMD 5
#define SER_DATA 0x00
#define TX_BUSY 0x20
#define TIMEOUT 0xffff
#undef SLOW_DOWN
static const char digits[16] = "0123456789abcdef";
static volatile unsigned char *const com1 = (unsigned char *) SERIAL_BASE;
#ifdef SLOW_DOWN
static inline void slow_down()
{
int k;
for (k = 0; k < 10000; k++);
}
#else
#define slow_down()
#endif
void putch(const unsigned char c)
{
unsigned char ch;
int i = 0;
do {
ch = com1[SER_CMD];
slow_down();
i++;
if (i > TIMEOUT) {
break;
}
} while (0 == (ch & TX_BUSY));
com1[SER_DATA] = c;
}
void puts(unsigned char *cp)
{
unsigned char ch;
int i = 0;
while (*cp) {
do {
ch = com1[SER_CMD];
slow_down();
i++;
if (i > TIMEOUT) {
break;
}
} while (0 == (ch & TX_BUSY));
com1[SER_DATA] = *cp++;
}
putch('\r');
putch('\n');
}
void fputs(unsigned char *cp)
{
unsigned char ch;
int i = 0;
while (*cp) {
do {
ch = com1[SER_CMD];
slow_down();
i++;
if (i > TIMEOUT) {
break;
}
} while (0 == (ch & TX_BUSY));
com1[SER_DATA] = *cp++;
}
}
void put64(uint64_t ul)
{
int cnt;
unsigned ch;
cnt = 16; /* 16 nibbles in a 64 bit long */
putch('0');
putch('x');
do {
cnt--;
ch = (unsigned char) (ul >> cnt * 4) & 0x0F;
putch(digits[ch]);
} while (cnt > 0);
}
void put32(unsigned u)
{
int cnt;
unsigned ch;
cnt = 8; /* 8 nibbles in a 32 bit long */
putch('0');
putch('x');
do {
cnt--;
ch = (unsigned char) (u >> cnt * 4) & 0x0F;
putch(digits[ch]);
} while (cnt > 0);
}
arch/mips/ite-boards/generic/reset.c 已删除 100644 → 0
浏览文件 @ 9b5a4a67
/*
*
* BRIEF MODULE DESCRIPTION
* ITE 8172 reset routines.
*
* Copyright 2001 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/sched.h>
#include <linux/mm.h>
#include <asm/cacheflush.h>
#include <asm/io.h>
#include <asm/processor.h>
#include <asm/reboot.h>
#include <asm/system.h>
void it8172_restart()
{
set_c0_status(ST0_BEV | ST0_ERL);
change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
flush_cache_all();
write_c0_wired(0);
__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
}
void it8172_halt(void)
{
printk(KERN_NOTICE "\n** You can safely turn off the power\n");
while (1)
__asm__(".set\tmips3\n\t"
"wait\n\t"
".set\tmips0");
}
void it8172_power_off(void)
{
it8172_halt();
}
arch/mips/ite-boards/generic/time.c 已删除 100644 → 0
浏览文件 @ 9b5a4a67
/*
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
*
* Copyright (C) 2003 MontaVista Software Inc.
* Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
*
* ########################################################################
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* ########################################################################
*
* Setting up the clock on the MIPS boards.
*/
#include <linux/init.h>
#include <linux/kernel_stat.h>
#include <linux/sched.h>
#include <linux/time.h>
#include <linux/spinlock.h>
#include <linux/mc146818rtc.h>
#include <asm/time.h>
#include <asm/mipsregs.h>
#include <asm/ptrace.h>
#include <asm/it8172/it8172.h>
#include <asm/it8172/it8172_int.h>
#include <asm/debug.h>
#define IT8172_RTC_ADR_REG (IT8172_PCI_IO_BASE + IT_RTC_BASE)
#define IT8172_RTC_DAT_REG (IT8172_RTC_ADR_REG + 1)
#define IT8172_RTC_CENTURY_REG (IT8172_PCI_IO_BASE + IT_RTC_CENTURY)
static volatile char *rtc_adr_reg = (char*)KSEG1ADDR(IT8172_RTC_ADR_REG);
static volatile char *rtc_dat_reg = (char*)KSEG1ADDR(IT8172_RTC_DAT_REG);
static volatile char *rtc_century_reg = (char*)KSEG1ADDR(IT8172_RTC_CENTURY_REG);
unsigned char it8172_rtc_read_data(unsigned long addr)
{
unsigned char retval;
*rtc_adr_reg = addr;
retval = *rtc_dat_reg;
return retval;
}
void it8172_rtc_write_data(unsigned char data, unsigned long addr)
{
*rtc_adr_reg = addr;
*rtc_dat_reg = data;
}
#undef CMOS_READ
#undef CMOS_WRITE
#define CMOS_READ(addr) it8172_rtc_read_data(addr)
#define CMOS_WRITE(data, addr) it8172_rtc_write_data(data, addr)
static unsigned char saved_control; /* remember rtc control reg */
static inline int rtc_24h(void) { return saved_control & RTC_24H; }
static inline int rtc_dm_binary(void) { return saved_control & RTC_DM_BINARY; }
static inline unsigned char
bin_to_hw(unsigned char c)
{
if (rtc_dm_binary())
return c;
else
return ((c/10) << 4) + (c%10);
}
static inline unsigned char
hw_to_bin(unsigned char c)
{
if (rtc_dm_binary())
return c;
else
return (c>>4)*10 + (c &0xf);
}
/* 0x80 bit indicates pm in 12-hour format */
static inline unsigned char
hour_bin_to_hw(unsigned char c)
{
if (rtc_24h())
return bin_to_hw(c);
if (c >= 12)
return 0x80 | bin_to_hw((c==12)?12:c-12); /* 12 is 12pm */
else
return bin_to_hw((c==0)?12:c); /* 0 is 12 AM, not 0 am */
}
static inline unsigned char
hour_hw_to_bin(unsigned char c)
{
unsigned char tmp = hw_to_bin(c&0x3f);
if (rtc_24h())
return tmp;
if (c & 0x80)
return (tmp==12)?12:tmp+12; /* 12pm is 12, not 24 */
else
return (tmp==12)?0:tmp; /* 12am is 0 */
}
static unsigned long r4k_offset; /* Amount to increment compare reg each time */
static unsigned long r4k_cur; /* What counter should be at next timer irq */
extern unsigned int mips_hpt_frequency;
/*
* Figure out the r4k offset, the amount to increment the compare
* register for each time tick.
* Use the RTC to calculate offset.
*/
static unsigned long __init cal_r4koff(void)
{
unsigned int flags;
local_irq_save(flags);
/* Start counter exactly on falling edge of update flag */
while (CMOS_READ(RTC_REG_A) & RTC_UIP);
while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
/* Start r4k counter. */
write_c0_count(0);
/* Read counter exactly on falling edge of update flag */
while (CMOS_READ(RTC_REG_A) & RTC_UIP);
while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
mips_hpt_frequency = read_c0_count();
/* restore interrupts */
local_irq_restore(flags);
return (mips_hpt_frequency / HZ);
}
static unsigned long
it8172_rtc_get_time(void)
{
unsigned int year, mon, day, hour, min, sec;
unsigned int flags;
/* avoid update-in-progress. */
for (;;) {
local_irq_save(flags);
if (! (CMOS_READ(RTC_REG_A) & RTC_UIP))
break;
/* don't hold intr closed all the time */
local_irq_restore(flags);
}
/* Read regs. */
sec = hw_to_bin(CMOS_READ(RTC_SECONDS));
min = hw_to_bin(CMOS_READ(RTC_MINUTES));
hour = hour_hw_to_bin(CMOS_READ(RTC_HOURS));
day = hw_to_bin(CMOS_READ(RTC_DAY_OF_MONTH));
mon = hw_to_bin(CMOS_READ(RTC_MONTH));
year = hw_to_bin(CMOS_READ(RTC_YEAR)) +
hw_to_bin(*rtc_century_reg) * 100;
/* restore interrupts */
local_irq_restore(flags);
return mktime(year, mon, day, hour, min, sec);
}
static int
it8172_rtc_set_time(unsigned long t)
{
struct rtc_time tm;
unsigned int flags;
/* convert */
to_tm(t, &tm);
/* avoid update-in-progress. */
for (;;) {
local_irq_save(flags);
if (! (CMOS_READ(RTC_REG_A) & RTC_UIP))
break;
/* don't hold intr closed all the time */
local_irq_restore(flags);
}
*rtc_century_reg = bin_to_hw(tm.tm_year/100);
CMOS_WRITE(bin_to_hw(tm.tm_sec), RTC_SECONDS);
CMOS_WRITE(bin_to_hw(tm.tm_min), RTC_MINUTES);
CMOS_WRITE(hour_bin_to_hw(tm.tm_hour), RTC_HOURS);
CMOS_WRITE(bin_to_hw(tm.tm_mday), RTC_DAY_OF_MONTH);
CMOS_WRITE(bin_to_hw(tm.tm_mon+1), RTC_MONTH); /* tm_mon starts from 0 */
CMOS_WRITE(bin_to_hw(tm.tm_year%100), RTC_YEAR);
/* restore interrupts */
local_irq_restore(flags);
return 0;
}
void __init it8172_time_init(void)
{
unsigned int est_freq, flags;
local_irq_save(flags);
saved_control = CMOS_READ(RTC_CONTROL);
printk("calculating r4koff... ");
r4k_offset = cal_r4koff();
printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset);
est_freq = 2*r4k_offset*HZ;
est_freq += 5000; /* round */
est_freq -= est_freq%10000;
printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
(est_freq%1000000)*100/1000000);
local_irq_restore(flags);
rtc_mips_get_time = it8172_rtc_get_time;
rtc_mips_set_time = it8172_rtc_set_time;
}
#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
void __init plat_timer_setup(struct irqaction *irq)
{
puts("timer_setup\n");
put32(NR_IRQS);
puts("");
/* we are using the cpu counter for timer interrupts */
setup_irq(MIPS_CPU_TIMER_IRQ, irq);
/* to generate the first timer interrupt */
r4k_cur = (read_c0_count() + r4k_offset);
write_c0_compare(r4k_cur);
set_c0_status(ALLINTS);
}
arch/mips/ite-boards/ivr/Makefile 已删除 100644 → 0
浏览文件 @ 9b5a4a67
#
# Copyright 2000 MontaVista Software Inc.
# Author: MontaVista Software, Inc.
# ppopov@mvista.com or source@mvista.com
#
# Makefile for the Globespan IVR board,
# board-specific files.
#
obj-y += init.o
arch/mips/ite-boards/ivr/README 已删除 100644 → 0
浏览文件 @ 9b5a4a67
This is not really a board made by ITE Semi, but it's very
similar to the ITE QED-4N-S01B board. The IVR board is made
by Globespan and it's a reference board for the PVR chip.
arch/mips/ite-boards/ivr/init.c 已删除 100644 → 0
浏览文件 @ 9b5a4a67
/*
* BRIEF MODULE DESCRIPTION
* IVR board setup.
*
* Copyright 2000 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/bootmem.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <asm/sections.h>
#include <asm/it8172/it8172.h>
#include <asm/it8172/it8172_dbg.h>
int prom_argc;
char **prom_argv, **prom_envp;
extern void __init prom_init_cmdline(void);
extern unsigned long __init prom_get_memsize(void);
extern void __init it8172_init_ram_resource(unsigned long memsize);
const char *get_system_type(void)
{
return "Globespan IVR";
}
void __init prom_init(void)
{
unsigned long mem_size;
unsigned long pcicr;
prom_argc = fw_arg0;
prom_argv = (char **) fw_arg1;
prom_envp = (int *) fw_arg3;
mips_machgroup = MACH_GROUP_GLOBESPAN;
mips_machtype = MACH_IVR; /* Globespan's iTVC15 reference board */
prom_init_cmdline();
/* pmon does not set memsize */
mem_size = prom_get_memsize();
mem_size = mem_size << 20;
/*
* make the entire physical memory visible to pci bus masters
*/
IT_READ(IT_MC_PCICR, pcicr);
pcicr &= ~0x1f;
pcicr |= (mem_size - 1) >> 22;
IT_WRITE(IT_MC_PCICR, pcicr);
it8172_init_ram_resource(mem_size);
add_memory_region(0, mem_size, BOOT_MEM_RAM);
}
arch/mips/ite-boards/qed-4n-s01b/Makefile 已删除 100644 → 0
浏览文件 @ 9b5a4a67
#
# Copyright 2000 MontaVista Software Inc.
# Author: MontaVista Software, Inc.
# ppopov@mvista.com or source@mvista.com
#
# Makefile for the ITE 8172 (qed-4n-s01b) board, board
# specific files.
#
obj-y := init.o
arch/mips/ite-boards/qed-4n-s01b/README 已删除 100644 → 0
浏览文件 @ 9b5a4a67
This is an ITE (www.iteusa.com) eval board for the ITE 8172G
system controller, with a QED 5231 CPU.
arch/mips/ite-boards/qed-4n-s01b/init.c 已删除 100644 → 0
浏览文件 @ 9b5a4a67
/*
* BRIEF MODULE DESCRIPTION
* IT8172/QED5231 board setup.
*
* Copyright 2000 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/bootmem.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <asm/sections.h>
#include <asm/it8172/it8172.h>
#include <asm/it8172/it8172_dbg.h>
int prom_argc;
char **prom_argv, **prom_envp;
extern void __init prom_init_cmdline(void);
extern unsigned long __init prom_get_memsize(void);
extern void __init it8172_init_ram_resource(unsigned long memsize);
const char *get_system_type(void)
{
return "ITE QED-4N-S01B";
}
void __init prom_init(void)
{
unsigned long mem_size;
unsigned long pcicr;
prom_argc = fw_arg0;
prom_argv = (char **) fw_arg1;
prom_envp = (int *) fw_arg3;
mips_machgroup = MACH_GROUP_ITE;
mips_machtype = MACH_QED_4N_S01B; /* ITE board name/number */
prom_init_cmdline();
mem_size = prom_get_memsize();
printk("Memory size: %dMB\n", (unsigned)mem_size);
mem_size <<= 20; /* MB */
/*
* make the entire physical memory visible to pci bus masters
*/
IT_READ(IT_MC_PCICR, pcicr);
pcicr &= ~0x1f;
pcicr |= (mem_size - 1) >> 22;
IT_WRITE(IT_MC_PCICR, pcicr);
it8172_init_ram_resource(mem_size);
add_memory_region(0, mem_size, BOOT_MEM_RAM);
}
arch/mips/kernel/time.c
浏览文件 @ e6bf0bf3
......@@ -149,80 +149,6 @@ void (*mips_timer_ack)(void);
unsigned int (*mips_hpt_read)(void);
void (*mips_hpt_init)(unsigned int);
/*
* This version of gettimeofday has microsecond resolution and better than
* microsecond precision on fast machines with cycle counter.
*/
void do_gettimeofday(struct timeval *tv)
{
unsigned long seq;
unsigned long usec, sec;
unsigned long max_ntp_tick;
do {
seq = read_seqbegin(&xtime_lock);
usec = do_gettimeoffset();
/*
* If time_adjust is negative then NTP is slowing the clock
* so make sure not to go into next possible interval.
* Better to lose some accuracy than have time go backwards..
*/
if (unlikely(time_adjust < 0)) {
max_ntp_tick = (USEC_PER_SEC / HZ) - tickadj;
usec = min(usec, max_ntp_tick);
}
sec = xtime.tv_sec;
usec += (xtime.tv_nsec / 1000);
} while (read_seqretry(&xtime_lock, seq));
while (usec >= 1000000) {
usec -= 1000000;
sec++;
}
tv->tv_sec = sec;
tv->tv_usec = usec;
}
EXPORT_SYMBOL(do_gettimeofday);
int do_settimeofday(struct timespec *tv)
{
time_t wtm_sec, sec = tv->tv_sec;
long wtm_nsec, nsec = tv->tv_nsec;
if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
return -EINVAL;
write_seqlock_irq(&xtime_lock);
/*
* This is revolting. We need to set "xtime" correctly. However,
* the value in this location is the value at the most recent update
* of wall time. Discover what correction gettimeofday() would have
* made, and then undo it!
*/
nsec -= do_gettimeoffset() * NSEC_PER_USEC;
wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
set_normalized_timespec(&xtime, sec, nsec);
set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
ntp_clear();
write_sequnlock_irq(&xtime_lock);
clock_was_set();
return 0;
}
EXPORT_SYMBOL(do_settimeofday);
/*
* Gettimeoffset routines. These routines returns the time duration
* since last timer interrupt in usecs.
......
arch/mips/mm/init.c
浏览文件 @ e6bf0bf3
......@@ -163,10 +163,10 @@ static int __init page_is_ram(unsigned long pagenr)
void __init paging_init(void)
{
unsigned long zones_size[] = { 0, };
unsigned long zones_size[MAX_NR_ZONES] = { 0, };
unsigned long max_dma, high, low;
#ifndef CONFIG_FLATMEM
unsigned long zholes_size[] = { 0, };
unsigned long zholes_size[MAX_NR_ZONES] = { 0, };
unsigned long i, j, pfn;
#endif
......
arch/mips/pci/Makefile
浏览文件 @ e6bf0bf3
......@@ -7,7 +7,6 @@ obj-y += pci.o
#
# PCI bus host bridge specific code
#
obj-$(CONFIG_ITE_BOARD_GEN) += ops-it8172.o
obj-$(CONFIG_MIPS_BONITO64) += ops-bonito64.o
obj-$(CONFIG_MIPS_GT64111) += ops-gt64111.o
obj-$(CONFIG_MIPS_GT64120) += ops-gt64120.o
......@@ -28,8 +27,6 @@ obj-$(CONFIG_LASAT) += pci-lasat.o
obj-$(CONFIG_MIPS_ATLAS) += fixup-atlas.o
obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o
obj-$(CONFIG_MIPS_EV64120) += fixup-ev64120.o
obj-$(CONFIG_MIPS_ITE8172) += fixup-ite8172g.o
obj-$(CONFIG_MIPS_IVR) += fixup-ivr.o
obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o
obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o
obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o
......
arch/mips/pci/fixup-ite8172g.c 已删除 100644 → 0
浏览文件 @ 9b5a4a67
/*
* BRIEF MODULE DESCRIPTION
* Board specific pci fixups.
*
* Copyright 2000 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/it8172/it8172.h>
#include <asm/it8172/it8172_pci.h>
#include <asm/it8172/it8172_int.h>
/*
* Shortcuts
*/
#define INTA IT8172_PCI_INTA_IRQ
#define INTB IT8172_PCI_INTB_IRQ
#define INTC IT8172_PCI_INTC_IRQ
#define INTD IT8172_PCI_INTD_IRQ
static const int internal_func_irqs[7] __initdata = {
IT8172_AC97_IRQ,
IT8172_DMA_IRQ,
IT8172_CDMA_IRQ,
IT8172_USB_IRQ,
IT8172_BRIDGE_MASTER_IRQ,
IT8172_IDE_IRQ,
IT8172_MC68K_IRQ
};
static char irq_tab_ite8172g[][5] __initdata = {
[0x10] = { 0, INTA, INTB, INTC, INTD },
[0x11] = { 0, INTA, INTB, INTC, INTD },
[0x12] = { 0, INTB, INTC, INTD, INTA },
[0x13] = { 0, INTC, INTD, INTA, INTB },
[0x14] = { 0, INTD, INTA, INTB, INTC },
};
int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
/*
* Internal device 1 is actually 7 different internal devices on the
* IT8172G (a multifunction device).
*/
if (slot == 1)
return internal_func_irqs[PCI_FUNC(dev->devfn)];
return irq_tab_ite8172g[slot][pin];
}
/* Do platform specific device initialization at pci_enable_device() time */
int pcibios_plat_dev_init(struct pci_dev *dev)
{
return 0;
}
arch/mips/pci/fixup-ivr.c 已删除 100644 → 0
浏览文件 @ 9b5a4a67
/*
*
* BRIEF MODULE DESCRIPTION
* Globespan IVR board-specific pci fixups.
*
* Copyright 2000 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/it8172/it8172.h>
#include <asm/it8172/it8172_pci.h>
#include <asm/it8172/it8172_int.h>
/*
* Shortcuts
*/
#define INTA IT8172_PCI_INTA_IRQ
#define INTB IT8172_PCI_INTB_IRQ
#define INTC IT8172_PCI_INTC_IRQ
#define INTD IT8172_PCI_INTD_IRQ
static const int internal_func_irqs[7] __initdata = {
IT8172_AC97_IRQ,
IT8172_DMA_IRQ,
IT8172_CDMA_IRQ,
IT8172_USB_IRQ,
IT8172_BRIDGE_MASTER_IRQ,
IT8172_IDE_IRQ,
IT8172_MC68K_IRQ
};
static char irq_tab_ivr[][5] __initdata = {
[0x11] = { INTC, INTC, INTD, INTA, INTB }, /* Realtek RTL-8139 */
[0x12] = { INTB, INTB, INTB, INTC, INTC }, /* IVR slot */
[0x13] = { INTA, INTA, INTB, INTC, INTD } /* Expansion slot */
};
int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
if (slot == 1)
return internal_func_irqs[PCI_FUNC(dev->devfn)];
return irq_tab_ivr[slot][pin];
}
/* Do platform specific device initialization at pci_enable_device() time */
int pcibios_plat_dev_init(struct pci_dev *dev)
{
return 0;
}
arch/mips/pci/fixup-sb1250.c
浏览文件 @ e6bf0bf3
/*
* arch/mips/pci/fixup-sb1250.c
*
* Copyright (C) 2004 MIPS Technologies, Inc. All rights reserved.
* Copyright (C) 2004, 2006 MIPS Technologies, Inc. All rights reserved.
* Author: Maciej W. Rozycki <macro@mips.com>
*
* This program is free software; you can redistribute it and/or
......@@ -13,6 +13,17 @@
#include <linux/init.h>
#include <linux/pci.h>
/*
* Set the the BCM1250, etc. PCI host bridge's TRDY timeout
* to the finite max.
*/
static void __init quirk_sb1250_pci(struct pci_dev *dev)
{
pci_write_config_byte(dev, 0x40, 0xff);
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIBYTE, PCI_DEVICE_ID_BCM1250_PCI,
quirk_sb1250_pci);
/*
* The BCM1250, etc. PCI/HT bridge reports as a host bridge.
*/
......@@ -22,3 +33,13 @@ static void __init quirk_sb1250_ht(struct pci_dev *dev)
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIBYTE, PCI_DEVICE_ID_BCM1250_HT,
quirk_sb1250_ht);
/*
* Set the the SP1011 HT/PCI bridge's TRDY timeout to the finite max.
*/
static void __init quirk_sp1011(struct pci_dev *dev)
{
pci_write_config_byte(dev, 0x64, 0xff);
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIPACKETS, PCI_DEVICE_ID_SP1011,
quirk_sp1011);
arch/mips/pci/ops-it8172.c 已删除 100644 → 0
浏览文件 @ 9b5a4a67
/*
*
* BRIEF MODULE DESCRIPTION
* IT8172 system controller specific pci support.
*
* Copyright 2000 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
*
* Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/it8172/it8172.h>
#include <asm/it8172/it8172_pci.h>
#define PCI_ACCESS_READ 0
#define PCI_ACCESS_WRITE 1
#undef DEBUG
#ifdef DEBUG
#define DBG(x...) printk(x)
#else
#define DBG(x...)
#endif
static struct resource pci_mem_resource_1;
static struct resource pci_io_resource = {
.start = 0x14018000,
.end = 0x17FFFFFF,
.name = "io pci IO space",
.flags = IORESOURCE_IO
};
static struct resource pci_mem_resource_0 = {
.start = 0x10101000,
.end = 0x13FFFFFF,
.name = "ext pci memory space 0/1",
.flags = IORESOURCE_MEM,
.parent = &pci_mem_resource_0,
.sibling = NULL,
.child = &pci_mem_resource_1
};
static struct resource pci_mem_resource_1 = {
.start = 0x1A000000,
.end = 0x1FBFFFFF,
.name = "ext pci memory space 2/3",
.flags = IORESOURCE_MEM,
.parent = &pci_mem_resource_0
};
extern struct pci_ops it8172_pci_ops;
struct pci_controller it8172_controller = {
.pci_ops = &it8172_pci_ops,
.io_resource = &pci_io_resource,
.mem_resource = &pci_mem_resource_0,
};
static int it8172_pcibios_config_access(unsigned char access_type,
struct pci_bus *bus,
unsigned int devfn, int where,
u32 * data)
{
/*
* config cycles are on 4 byte boundary only
*/
/* Setup address */
IT_WRITE(IT_CONFADDR, (bus->number << IT_BUSNUM_SHF) |
(devfn << IT_FUNCNUM_SHF) | (where & ~0x3));
if (access_type == PCI_ACCESS_WRITE) {
IT_WRITE(IT_CONFDATA, *data);
} else {
IT_READ(IT_CONFDATA, *data);
}
/*
* Revisit: check for master or target abort.
*/
return 0;
}
/*
* We can't address 8 and 16 bit words directly. Instead we have to
* read/write a 32bit word and mask/modify the data we actually want.
*/
static write_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 val)
{
u32 data = 0;
switch (size) {
case 1:
if (it8172_pcibios_config_access
(PCI_ACCESS_READ, dev, where, &data))
return -1;
*val = (data >> ((where & 3) << 3)) & 0xff;
return PCIBIOS_SUCCESSFUL;
case 2:
if (where & 1)
return PCIBIOS_BAD_REGISTER_NUMBER;
if (it8172_pcibios_config_access
(PCI_ACCESS_READ, dev, where, &data))
return -1;
*val = (data >> ((where & 3) << 3)) & 0xffff;
DBG("cfg read word: bus %d dev_fn %x where %x: val %x\n",
dev->bus->number, dev->devfn, where, *val);
return PCIBIOS_SUCCESSFUL;
case 4:
if (where & 3)
return PCIBIOS_BAD_REGISTER_NUMBER;
if (it8172_pcibios_config_access
(PCI_ACCESS_READ, dev, where, &data))
return -1;
*val = data;
return PCIBIOS_SUCCESSFUL;
}
}
static write_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 val)
{
u32 data = 0;
switch (size) {
case 1:
if (it8172_pcibios_config_access
(PCI_ACCESS_READ, dev, where, &data))
return -1;
data = (data & ~(0xff << ((where & 3) << 3))) |
(val << ((where & 3) << 3));
if (it8172_pcibios_config_access
(PCI_ACCESS_WRITE, dev, where, &data))
return -1;
return PCIBIOS_SUCCESSFUL;
case 2:
if (where & 1)
return PCIBIOS_BAD_REGISTER_NUMBER;
if (it8172_pcibios_config_access
(PCI_ACCESS_READ, dev, where, &data))
eturn - 1;
data = (data & ~(0xffff << ((where & 3) << 3))) |
(val << ((where & 3) << 3));
if (it8172_pcibios_config_access
(PCI_ACCESS_WRITE, dev, where, &data))
return -1;
return PCIBIOS_SUCCESSFUL;
case 4:
if (where & 3)
return PCIBIOS_BAD_REGISTER_NUMBER;
if (it8172_pcibios_config_access
(PCI_ACCESS_WRITE, dev, where, &val))
return -1;
return PCIBIOS_SUCCESSFUL;
}
}
struct pci_ops it8172_pci_ops = {
.read = read_config,
.write = write_config,
};
arch/mips/sibyte/bcm1480/irq.c
浏览文件 @ e6bf0bf3
......@@ -482,7 +482,7 @@ asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
write_c0_compare(read_c0_count());
#endif
pending = read_c0_cause();
pending = read_c0_cause() & read_c0_status();
#ifdef CONFIG_SIBYTE_BCM1480_PROF
if (pending & CAUSEF_IP7) /* Cpu performance counter interrupt */
......
arch/mips/sibyte/sb1250/irq.c
浏览文件 @ e6bf0bf3
......@@ -442,7 +442,7 @@ asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
* blasting the high 32 bits.
*/
pending = read_c0_cause();
pending = read_c0_cause() & read_c0_status();
#ifdef CONFIG_SIBYTE_SB1250_PROF
if (pending & CAUSEF_IP7) /* Cpu performance counter interrupt */
......@@ -476,5 +476,8 @@ asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
R_IMR_INTERRUPT_STATUS_BASE)));
if (mask)
do_IRQ(fls64(mask) - 1, regs);
}
else
spurious_interrupt(regs);
} else
spurious_interrupt(regs);
}
drivers/char/.gitignore
浏览文件 @ e6bf0bf3
consolemap_deftbl.c
defkeymap.c
qtronixmap.c
drivers/char/Kconfig
浏览文件 @ e6bf0bf3
......@@ -371,36 +371,6 @@ config AU1000_SERIAL_CONSOLE
If you have an Alchemy AU1000 processor (MIPS based) and you want
to use a console on a serial port, say Y. Otherwise, say N.
config QTRONIX_KEYBOARD
bool "Enable Qtronix 990P Keyboard Support"
depends on IT8712
help
Images of Qtronix keyboards are at
<http://www.qtronix.com/keyboard.html>.
config IT8172_CIR
bool
depends on QTRONIX_KEYBOARD
default y
config IT8172_SCR0
bool "Enable Smart Card Reader 0 Support "
depends on IT8712
help
Say Y here to support smart-card reader 0 (SCR0) on the Integrated
Technology Express, Inc. ITE8172 SBC. Vendor page at
<http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
board at <http://www.mvista.com/partners/semiconductor/ite.html>.
config IT8172_SCR1
bool "Enable Smart Card Reader 1 Support "
depends on IT8712
help
Say Y here to support smart-card reader 1 (SCR1) on the Integrated
Technology Express, Inc. ITE8172 SBC. Vendor page at
<http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
board at <http://www.mvista.com/partners/semiconductor/ite.html>.
config A2232
tristate "Commodore A2232 serial support (EXPERIMENTAL)"
depends on EXPERIMENTAL && ZORRO && BROKEN_ON_SMP
......
drivers/char/Makefile
浏览文件 @ e6bf0bf3
此差异已折叠。
drivers/char/ite_gpio.c 已删除 100644 → 0
浏览文件 @ 9b5a4a67
此差异已折叠。
drivers/char/qtronixmap.c_shipped 已删除 100644 → 0
浏览文件 @ 9b5a4a67
此差异已折叠。
drivers/char/qtronixmap.map 已删除 100644 → 0
浏览文件 @ 9b5a4a67
此差异已折叠。
drivers/ide/Kconfig
浏览文件 @ e6bf0bf3
......@@ -614,15 +614,6 @@ config BLK_DEV_PIIX
the kernel to change PIO, DMA and UDMA speeds and to configure
the chip to optimum performance.
config BLK_DEV_IT8172
bool "IT8172 IDE support"
depends on (MIPS_ITE8172 || MIPS_IVR)
help
Say Y here to support the on-board IDE controller on the Integrated
Technology Express, Inc. ITE8172 SBC. Vendor page at
<http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
board at <http://www.mvista.com/partners/semiconductor/ite.html>.
config BLK_DEV_IT821X
tristate "IT821X IDE support"
help
......
drivers/ide/pci/Makefile
浏览文件 @ e6bf0bf3
此差异已折叠。
drivers/ide/pci/it8172.c 已删除 100644 → 0
浏览文件 @ 9b5a4a67
此差异已折叠。
include/asm-mips/bootinfo.h
浏览文件 @ e6bf0bf3
此差异已折叠。
include/asm-mips/it8172/it8172.h 已删除 100644 → 0
浏览文件 @ 9b5a4a67
此差异已折叠。
include/asm-mips/it8172/it8172_cir.h 已删除 100644 → 0
浏览文件 @ 9b5a4a67
此差异已折叠。
include/asm-mips/it8172/it8172_dbg.h 已删除 100644 → 0
浏览文件 @ 9b5a4a67
此差异已折叠。
include/asm-mips/it8172/it8172_int.h 已删除 100644 → 0
浏览文件 @ 9b5a4a67
此差异已折叠。
include/asm-mips/it8172/it8172_pci.h 已删除 100644 → 0
浏览文件 @ 9b5a4a67
此差异已折叠。
include/asm-mips/it8712.h 已删除 100644 → 0
浏览文件 @ 9b5a4a67
此差异已折叠。
include/asm-mips/ptrace.h
浏览文件 @ e6bf0bf3
此差异已折叠。
include/asm-mips/serial.h
浏览文件 @ e6bf0bf3
此差异已折叠。
include/linux/ite_gpio.h 已删除 100644 → 0
浏览文件 @ 9b5a4a67
此差异已折叠。
include/linux/pci_ids.h
浏览文件 @ e6bf0bf3
此差异已折叠。
sound/oss/Kconfig
浏览文件 @ e6bf0bf3
此差异已折叠。
sound/oss/Makefile
浏览文件 @ e6bf0bf3
此差异已折叠。
sound/oss/ite8172.c 已删除 100644 → 0
浏览文件 @ 9b5a4a67
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或