[SCSI] qla2xxx: remove unnecessary reads of PCI_CAP_ID_EXP

The PCIE capability offset is saved during PCI bus walking.  It will
remove an unnecessary search in the PCI configuration space if this
value is referenced instead of reacquiring it.  Also, pci_is_pcie is a
better way of determining if the device is PCIE or not (as it uses the
same saved PCIE capability offset).
Signed-off-by: NJon Mason <jdmason@kudzu.us>
Acked-by: NChad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

drivers/scsi/qla2xxx/qla_init.c

@@ -685,7 +685,7 @@ qla24xx_pci_config(scsi_qla_host_t *vha)
 		pcix_set_mmrbc(ha->pdev, 2048);
 
 	/* PCIe -- adjust Maximum Read Request Size (2048). */
-	if (pci_find_capability(ha->pdev, PCI_CAP_ID_EXP))
+	if (pci_is_pcie(ha->pdev))
 		pcie_set_readrq(ha->pdev, 2048);
 
 	pci_disable_rom(ha->pdev);
@@ -721,7 +721,7 @@ qla25xx_pci_config(scsi_qla_host_t *vha)
 	pci_write_config_word(ha->pdev, PCI_COMMAND, w);
 
 	/* PCIe -- adjust Maximum Read Request Size (2048). */
-	if (pci_find_capability(ha->pdev, PCI_CAP_ID_EXP))
+	if (pci_is_pcie(ha->pdev))
 		pcie_set_readrq(ha->pdev, 2048);
 
 	pci_disable_rom(ha->pdev);

drivers/scsi/qla2xxx/qla_nx.c

@@ -1620,7 +1620,7 @@ qla82xx_pci_info_str(struct scsi_qla_host *vha, char *str)
 	char lwstr[6];
 	uint16_t lnk;
 
-	pcie_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP);
+	pcie_reg = pci_pcie_cap(ha->pdev);
 	pci_read_config_word(ha->pdev, pcie_reg + PCI_EXP_LNKSTA, &lnk);
 	ha->link_width = (lnk >> 4) & 0x3f;
 
@@ -2528,7 +2528,7 @@ qla82xx_start_firmware(scsi_qla_host_t *vha)
 	}
 
 	/* Negotiated Link width */
-	pcie_cap = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP);
+	pcie_cap = pci_pcie_cap(ha->pdev);
 	pci_read_config_word(ha->pdev, pcie_cap + PCI_EXP_LNKSTA, &lnk);
 	ha->link_width = (lnk >> 4) & 0x3f;
 

drivers/scsi/qla2xxx/qla_os.c

@@ -482,12 +482,12 @@ qla24xx_pci_info_str(struct scsi_qla_host *vha, char *str)
 	uint32_t pci_bus;
 	int pcie_reg;
 
-	pcie_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP);
+	pcie_reg = pci_pcie_cap(ha->pdev);
 	if (pcie_reg) {
 		char lwstr[6];
 		uint16_t pcie_lstat, lspeed, lwidth;
 
-		pcie_reg += 0x12;
+		pcie_reg += PCI_EXP_LNKCAP;
 		pci_read_config_word(ha->pdev, pcie_reg, &pcie_lstat);
 		lspeed = pcie_lstat & (BIT_0 | BIT_1 | BIT_2 | BIT_3);
 		lwidth = (pcie_lstat &