[media] cx23885: add support for cx24117 with tbs6980 or tbs6981

Signed-off-by: NLuis Alves <ljalvs@gmail.com>
Reviewed-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/pci/cx23885/Kconfig

@@ -23,6 +23,7 @@ config VIDEO_CX23885
 	select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT
 	select DVB_STV6110 if MEDIA_SUBDRV_AUTOSELECT
 	select DVB_CX24116 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_CX24117 if MEDIA_SUBDRV_AUTOSELECT
 	select DVB_STV0900 if MEDIA_SUBDRV_AUTOSELECT
 	select DVB_DS3000 if MEDIA_SUBDRV_AUTOSELECT
 	select DVB_TS2020 if MEDIA_SUBDRV_AUTOSELECT

drivers/media/pci/cx23885/cx23885-cards.c

@@ -259,6 +259,16 @@ struct cx23885_board cx23885_boards[] = {
 		.name		= "TurboSight TBS 6920",
 		.portb		= CX23885_MPEG_DVB,
 	},
+	[CX23885_BOARD_TBS_6980] = {
+		.name		= "TurboSight TBS 6980",
+		.portb		= CX23885_MPEG_DVB,
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_TBS_6981] = {
+		.name		= "TurboSight TBS 6981",
+		.portb		= CX23885_MPEG_DVB,
+		.portc		= CX23885_MPEG_DVB,
+	},
 	[CX23885_BOARD_TEVII_S470] = {
 		.name		= "TeVii S470",
 		.portb		= CX23885_MPEG_DVB,
@@ -698,6 +708,14 @@ struct cx23885_subid cx23885_subids[] = {
 		.subvendor = 0x6920,
 		.subdevice = 0x8888,
 		.card      = CX23885_BOARD_TBS_6920,
+	}, {
+		.subvendor = 0x6980,
+		.subdevice = 0x8888,
+		.card      = CX23885_BOARD_TBS_6980,
+	}, {
+		.subvendor = 0x6981,
+		.subdevice = 0x8888,
+		.card      = CX23885_BOARD_TBS_6981,
 	}, {
 		.subvendor = 0xd470,
 		.subdevice = 0x9022,
@@ -1023,6 +1041,35 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
 			dev->name, tv.model);
 }
 
+/* Some TBS cards require initing a chip using a bitbanged SPI attached
+   to the cx23885 gpio's. If this chip doesn't get init'ed the demod
+   doesn't respond to any command. */
+static void tbs_card_init(struct cx23885_dev *dev)
+{
+	int i;
+	const u8 buf[] = {
+		0xe0, 0x06, 0x66, 0x33, 0x65,
+		0x01, 0x17, 0x06, 0xde};
+
+	switch (dev->board) {
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
+		cx_set(GP0_IO, 0x00070007);
+		usleep_range(1000, 10000);
+		cx_clear(GP0_IO, 2);
+		usleep_range(1000, 10000);
+		for (i = 0; i < 9 * 8; i++) {
+			cx_clear(GP0_IO, 7);
+			usleep_range(1000, 10000);
+			cx_set(GP0_IO,
+				((buf[i >> 3] >> (7 - (i & 7))) & 1) | 4);
+			usleep_range(1000, 10000);
+		}
+		cx_set(GP0_IO, 7);
+		break;
+	}
+}
+
 int cx23885_tuner_callback(void *priv, int component, int command, int arg)
 {
 	struct cx23885_tsport *port = priv;
@@ -1225,6 +1272,8 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
 		cx_set(GP0_IO, 0x00040004);
 		break;
 	case CX23885_BOARD_TBS_6920:
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
 	case CX23885_BOARD_PROF_8000:
 		cx_write(MC417_CTL, 0x00000036);
 		cx_write(MC417_OEN, 0x00001000);
@@ -1473,6 +1522,8 @@ int cx23885_ir_init(struct cx23885_dev *dev)
 	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
 	case CX23885_BOARD_TEVII_S470:
 	case CX23885_BOARD_MYGICA_X8507:
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
 		if (!enable_885_ir)
 			break;
 		dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
@@ -1516,6 +1567,8 @@ void cx23885_ir_fini(struct cx23885_dev *dev)
 	case CX23885_BOARD_TEVII_S470:
 	case CX23885_BOARD_HAUPPAUGE_HVR1250:
 	case CX23885_BOARD_MYGICA_X8507:
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
 		cx23885_irq_remove(dev, PCI_MSK_AV_CORE);
 		/* sd_ir is a duplicate pointer to the AV Core, just clear it */
 		dev->sd_ir = NULL;
@@ -1561,6 +1614,8 @@ void cx23885_ir_pci_int_enable(struct cx23885_dev *dev)
 	case CX23885_BOARD_TEVII_S470:
 	case CX23885_BOARD_HAUPPAUGE_HVR1250:
 	case CX23885_BOARD_MYGICA_X8507:
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
 		if (dev->sd_ir)
 			cx23885_irq_add_enable(dev, PCI_MSK_AV_CORE);
 		break;
@@ -1676,6 +1731,16 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
 		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
 		break;
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
+		ts1->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
+		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
+		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		tbs_card_init(dev);
+		break;
 	case CX23885_BOARD_MYGICA_X8506:
 	case CX23885_BOARD_MAGICPRO_PROHDTVE2:
 	case CX23885_BOARD_MYGICA_X8507:
@@ -1752,6 +1817,8 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_MYGICA_X8507:
 	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
 	case CX23885_BOARD_AVERMEDIA_HC81R:
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
 		dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
 				&dev->i2c_bus[2].i2c_adap,
 				"cx25840", 0x88 >> 1, NULL);

drivers/media/pci/cx23885/cx23885-dvb.c

@@ -51,6 +51,7 @@
 #include "stv6110.h"
 #include "lnbh24.h"
 #include "cx24116.h"
+#include "cx24117.h"
 #include "cimax2.h"
 #include "lgs8gxx.h"
 #include "netup-eeprom.h"
@@ -461,6 +462,10 @@ static struct cx24116_config tbs_cx24116_config = {
 	.demod_address = 0x55,
 };
 
+static struct cx24117_config tbs_cx24117_config = {
+	.demod_address = 0x55,
+};
+
 static struct ds3000_config tevii_ds3000_config = {
 	.demod_address = 0x68,
 };
@@ -1044,6 +1049,32 @@ static int dvb_register(struct cx23885_tsport *port)
 			fe0->dvb.frontend->ops.set_voltage = f300_set_voltage;
 
 		break;
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
+		i2c_bus = &dev->i2c_bus[1];
+
+		switch (port->nr) {
+		/* PORT B */
+		case 1:
+			fe0->dvb.frontend = dvb_attach(cx24117_attach,
+					&tbs_cx24117_config,
+					&i2c_bus->i2c_adap, NULL);
+			break;
+		/* PORT C */
+		case 2:
+			/* use fe1 pointer as temporary holder */
+			/* for the first frontend */
+			fe1 = videobuf_dvb_get_frontend(
+				&port->dev->ts1.frontends, 1);
+
+			fe0->dvb.frontend = dvb_attach(cx24117_attach,
+					&tbs_cx24117_config,
+					&i2c_bus->i2c_adap, fe1->dvb.frontend);
+			/* we're done, so clear fe1 pointer */
+			fe1 = NULL;
+			break;
+		}
+		break;
 	case CX23885_BOARD_TEVII_S470:
 		i2c_bus = &dev->i2c_bus[1];
 

drivers/media/pci/cx23885/cx23885-input.c

@@ -90,6 +90,8 @@ void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
 	case CX23885_BOARD_TEVII_S470:
 	case CX23885_BOARD_HAUPPAUGE_HVR1250:
 	case CX23885_BOARD_MYGICA_X8507:
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
 		/*
 		 * The only boards we handle right now.  However other boards
 		 * using the CX2388x integrated IR controller should be similar
@@ -168,6 +170,8 @@ static int cx23885_input_ir_start(struct cx23885_dev *dev)
 		break;
 	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
 	case CX23885_BOARD_TEVII_S470:
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
 		/*
 		 * The IR controller on this board only returns pulse widths.
 		 * Any other mode setting will fail to set up the device.
@@ -298,6 +302,14 @@ int cx23885_input_init(struct cx23885_dev *dev)
 		/* A guess at the remote */
 		rc_map = RC_MAP_TOTAL_MEDIA_IN_HAND_02;
 		break;
+	case CX23885_BOARD_TBS_6980:
+	case CX23885_BOARD_TBS_6981:
+		/* Integrated CX23885 IR controller */
+		driver_type = RC_DRIVER_IR_RAW;
+		allowed_protos = RC_BIT_ALL;
+		/* A guess at the remote */
+		rc_map = RC_MAP_TBS_NEC;
+		break;
 	default:
 		return -ENODEV;
 	}

drivers/media/pci/cx23885/cx23885.h

@@ -93,6 +93,8 @@
 #define CX23885_BOARD_PROF_8000                37
 #define CX23885_BOARD_HAUPPAUGE_HVR4400        38
 #define CX23885_BOARD_AVERMEDIA_HC81R          39
+#define CX23885_BOARD_TBS_6981                 40
+#define CX23885_BOARD_TBS_6980                 41
 
 #define GPIO_0 0x00000001
 #define GPIO_1 0x00000002