Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (45 commits)
  [MIPS] Pb1200/DBAu1200: move platform code to its proper place
  [MIPS] Fix handling of trap and breakpoint instructions
  [MIPS] Pb1200: do register SMC 91C111
  [MIPS] DBAu1200: fix bad SMC 91C111 resource size
  [NET] Kconfig: Rename MIKROTIK_RB500 -> MIKROTIK_RB532
  [MIPS] IP27: Fix build bug due to missing include
  [MIPS] Fix some sparse warnings on traps.c and irq-msc01.c
  [MIPS] cevt-gt641xx: Kill unnecessary include
  [MIPS] DS1287: Add clockevent driver
  [MIPS] add DECstation I/O ASIC clocksource
  [MIPS] rbtx4938: minor cleanup
  [MIPS] Alchemy: kill unused PCI_IRQ_TABLE_LOOKUP macro
  [MIPS] rbtx4938: misc cleanups
  [MIPS] jmr3927: use generic txx9 gpio
  [MIPS] rbhma4500: use generic txx9 gpio
  [MIPS] generic txx9 gpio support
  [MIPS] make fallback gpio.h gpiolib-friendly
  [MIPS] unexport null_perf_irq() and make it static
  [MIPS] unexport rtc_mips_set_time()
  [MIPS] unexport copy_from_user_page()
  ...

arch/mips/Kconfig

@@ -81,7 +81,9 @@ config MIPS_COBALT
 config MACH_DECSTATION
 	bool "DECstations"
 	select BOOT_ELF32
+	select CEVT_DS1287
 	select CEVT_R4K
+	select CSRC_IOASIC
 	select CSRC_R4K
 	select CPU_DADDI_WORKAROUNDS if 64BIT
 	select CPU_R4000_WORKAROUNDS if 64BIT
@@ -221,6 +223,7 @@ config MIPS_MALTA
 	select DMA_NONCOHERENT
 	select GENERIC_ISA_DMA
 	select IRQ_CPU
+	select IRQ_GIC
 	select HW_HAS_PCI
 	select I8253
 	select I8259
@@ -309,12 +312,12 @@ config MACH_VR41XX
 	select GENERIC_HARDIRQS_NO__DO_IRQ
 
 config PNX8550_JBS
-	bool "Philips PNX8550 based JBS board"
+	bool "NXP PNX8550 based JBS board"
 	select PNX8550
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config PNX8550_STB810
-	bool "Philips PNX8550 based STB810 board"
+	bool "NXP PNX8550 based STB810 board"
 	select PNX8550
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
@@ -612,6 +615,7 @@ config TOSHIBA_JMR3927
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select GENERIC_HARDIRQS_NO__DO_IRQ
+	select GPIO_TXX9
 
 config TOSHIBA_RBTX4927
 	bool "Toshiba RBTX49[23]7 board"
@@ -653,7 +657,7 @@ config TOSHIBA_RBTX4938
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_KGDB
 	select GENERIC_HARDIRQS_NO__DO_IRQ
-	select GENERIC_GPIO
+	select GPIO_TXX9
 	help
 	  This Toshiba board is based on the TX4938 processor. Say Y here to
 	  support this machine type
@@ -767,6 +771,9 @@ config BOOT_RAW
 config CEVT_BCM1480
 	bool
 
+config CEVT_DS1287
+	bool
+
 config CEVT_GT641XX
 	bool
 
@@ -782,12 +789,20 @@ config CEVT_TXX9
 config CSRC_BCM1480
 	bool
 
+config CSRC_IOASIC
+	bool
+
 config CSRC_R4K
 	bool
 
 config CSRC_SB1250
 	bool
 
+config GPIO_TXX9
+	select GENERIC_GPIO
+	select HAVE_GPIO_LIB
+	bool
+
 config CFE
 	bool
 
@@ -840,6 +855,9 @@ config MIPS_NILE4
 config MIPS_DISABLE_OBSOLETE_IDE
 	bool
 
+config SYNC_R4K
+	bool
+
 config NO_IOPORT
 	def_bool n
 
@@ -909,6 +927,9 @@ config IRQ_TXX9
 config IRQ_GT641XX
 	bool
 
+config IRQ_GIC
+	bool
+
 config MIPS_BOARDS_GEN
 	bool
 
@@ -1811,6 +1832,17 @@ config NR_CPUS
 	  performance should round up your number of processors to the next
 	  power of two.
 
+config MIPS_CMP
+	bool "MIPS CMP framework support"
+	depends on SMP
+	select SYNC_R4K
+	select SYS_SUPPORTS_SCHED_SMT
+	select WEAK_ORDERING
+	default n
+	help
+	  This is a placeholder option for the GCMP work. It will need to
+	  be handled differently...
+
 source "kernel/time/Kconfig"
 
 #

arch/mips/Kconfig.debug

@@ -73,14 +73,4 @@ config RUNTIME_DEBUG
 	  include/asm-mips/debug.h for debuging macros.
 	  If unsure, say N.
 
-config MIPS_UNCACHED
-	bool "Run uncached"
-	depends on DEBUG_KERNEL && !SMP && !SGI_IP27
-	help
-	  If you say Y here there kernel will disable all CPU caches.  This will
-	  reduce the system's performance dramatically but can help finding
-	  otherwise hard to track bugs.  It can also useful if you're doing
-	  hardware debugging with a logic analyzer and need to see all traffic
-	  on the bus.
-
 endmenu

arch/mips/Makefile

@@ -410,21 +410,21 @@ load-$(CONFIG_CASIO_E55)	+= 0xffffffff80004000
 load-$(CONFIG_TANBAC_TB022X)	+= 0xffffffff80000000
 
 #
-# Common Philips PNX8550
+# Common NXP PNX8550
 #
-core-$(CONFIG_SOC_PNX8550)	+= arch/mips/philips/pnx8550/common/
+core-$(CONFIG_SOC_PNX8550)	+= arch/mips/nxp/pnx8550/common/
 cflags-$(CONFIG_SOC_PNX8550)	+= -Iinclude/asm-mips/mach-pnx8550
 
 #
-# Philips PNX8550 JBS board
+# NXP PNX8550 JBS board
 #
-libs-$(CONFIG_PNX8550_JBS)	+= arch/mips/philips/pnx8550/jbs/
+libs-$(CONFIG_PNX8550_JBS)	+= arch/mips/nxp/pnx8550/jbs/
 #cflags-$(CONFIG_PNX8550_JBS)	+= -Iinclude/asm-mips/mach-pnx8550
 load-$(CONFIG_PNX8550_JBS)	+= 0xffffffff80060000
 
-# Philips PNX8550 STB810 board
+# NXP PNX8550 STB810 board
 #
-libs-$(CONFIG_PNX8550_STB810)	+= arch/mips/philips/pnx8550/stb810/
+libs-$(CONFIG_PNX8550_STB810)	+= arch/mips/nxp/pnx8550/stb810/
 load-$(CONFIG_PNX8550_STB810)	+= 0xffffffff80060000
 
 # NEC EMMA2RH boards

arch/mips/au1000/common/cputable.c

@@ -11,10 +11,7 @@
  *  as published by the Free Software Foundation; either version
  *  2 of the License, or (at your option) any later version.
  */
-#include <linux/string.h>
-#include <linux/sched.h>
-#include <linux/threads.h>
-#include <linux/init.h>
+
 #include <asm/mach-au1x00/au1000.h>
 
 struct cpu_spec* cur_cpu_spec[NR_CPUS];

arch/mips/au1000/common/dbdma.c

@@ -31,18 +31,12 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
-#include <linux/string.h>
-#include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
-#include <asm/system.h>
-
 
 #if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
 

arch/mips/au1000/common/dbg_io.c

 
-#include <asm/io.h>
 #include <asm/mach-au1x00/au1000.h>
 
 #ifdef CONFIG_KGDB
@@ -55,8 +54,7 @@ typedef         unsigned int  uint32;
 #define UART16550_READ(y)    (au_readl(DEBUG_BASE + y) & 0xff)
 #define UART16550_WRITE(y, z) (au_writel(z&0xff, DEBUG_BASE + y))
 
-extern unsigned long get_au1x00_uart_baud_base(void);
-extern unsigned long cal_r4koff(void);
+extern unsigned long calc_clock(void);
 
 void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
 {
@@ -64,7 +62,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
 	if (UART16550_READ(UART_MOD_CNTRL) != 0x3) {
 		UART16550_WRITE(UART_MOD_CNTRL, 3);
 	}
-	cal_r4koff();
+	calc_clock();
 
 	/* disable interrupts */
 	UART16550_WRITE(UART_IER, 0);

arch/mips/au1000/common/dma.c

@@ -33,12 +33,9 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
-#include <linux/sched.h>
 #include <linux/spinlock.h>
-#include <linux/string.h>
-#include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <asm/system.h>
+
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1000_dma.h>
 

arch/mips/au1000/common/gpio.c

@@ -27,13 +27,8 @@
  * 	others have a second one : GPIO2
  */
 
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/types.h>
 #include <linux/module.h>
 
-#include <asm/addrspace.h>
-
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/gpio.h>
 

arch/mips/au1000/common/irq.c

 /*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *		ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2007-2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
  *
@@ -27,7 +26,6 @@
  */
 #include <linux/bitops.h>
 #include <linux/init.h>
-#include <linux/io.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 
@@ -591,7 +589,7 @@ void __init arch_init_irq(void)
 		imp++;
 	}
 
-	set_c0_status(ALLINTS);
+	set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4);
 
 	/* Board specific IRQ initialization.
 	*/

arch/mips/au1000/common/pci.c

@@ -30,7 +30,7 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
-#include <linux/types.h>
+
 #include <linux/pci.h>
 #include <linux/kernel.h>
 #include <linux/init.h>

arch/mips/au1000/common/platform.c

@@ -3,18 +3,65 @@
  *
  * Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
  *
+ * (C) Copyright Embedded Alley Solutions, Inc 2005
+ * Author: Pantelis Antoniou <pantelis@embeddedalley.com>
+ *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <linux/device.h>
+
 #include <linux/platform_device.h>
-#include <linux/kernel.h>
+#include <linux/serial_8250.h>
 #include <linux/init.h>
-#include <linux/resource.h>
 
 #include <asm/mach-au1x00/au1xxx.h>
 
+#define PORT(_base, _irq)				\
+	{						\
+		.iobase		= _base,		\
+		.membase	= (void __iomem *)_base,\
+		.mapbase	= CPHYSADDR(_base),	\
+		.irq		= _irq,			\
+		.regshift	= 2,			\
+		.iotype		= UPIO_AU,		\
+		.flags		= UPF_SKIP_TEST 	\
+	}
+
+static struct plat_serial8250_port au1x00_uart_data[] = {
+#if defined(CONFIG_SERIAL_8250_AU1X00)
+#if defined(CONFIG_SOC_AU1000)
+	PORT(UART0_ADDR, AU1000_UART0_INT),
+	PORT(UART1_ADDR, AU1000_UART1_INT),
+	PORT(UART2_ADDR, AU1000_UART2_INT),
+	PORT(UART3_ADDR, AU1000_UART3_INT),
+#elif defined(CONFIG_SOC_AU1500)
+	PORT(UART0_ADDR, AU1500_UART0_INT),
+	PORT(UART3_ADDR, AU1500_UART3_INT),
+#elif defined(CONFIG_SOC_AU1100)
+	PORT(UART0_ADDR, AU1100_UART0_INT),
+	PORT(UART1_ADDR, AU1100_UART1_INT),
+	PORT(UART3_ADDR, AU1100_UART3_INT),
+#elif defined(CONFIG_SOC_AU1550)
+	PORT(UART0_ADDR, AU1550_UART0_INT),
+	PORT(UART1_ADDR, AU1550_UART1_INT),
+	PORT(UART3_ADDR, AU1550_UART3_INT),
+#elif defined(CONFIG_SOC_AU1200)
+	PORT(UART0_ADDR, AU1200_UART0_INT),
+	PORT(UART1_ADDR, AU1200_UART1_INT),
+#endif
+#endif	/* CONFIG_SERIAL_8250_AU1X00 */
+	{ },
+};
+
+static struct platform_device au1xx0_uart_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_AU1X00,
+	.dev			= {
+		.platform_data	= au1x00_uart_data,
+	},
+};
+
 /* OHCI (USB full speed host controller) */
 static struct resource au1xxx_usb_ohci_resources[] = {
 	[0] = {
@@ -186,19 +233,6 @@ static struct resource au1200_lcd_resources[] = {
 	}
 };
 
-static struct resource au1200_ide0_resources[] = {
-	[0] = {
-		.start		= AU1XXX_ATA_PHYS_ADDR,
-		.end 		= AU1XXX_ATA_PHYS_ADDR + AU1XXX_ATA_PHYS_LEN - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= AU1XXX_ATA_INT,
-		.end		= AU1XXX_ATA_INT,
-		.flags		= IORESOURCE_IRQ,
-	}
-};
-
 static u64 au1200_lcd_dmamask = ~(u32)0;
 
 static struct platform_device au1200_lcd_device = {
@@ -212,20 +246,6 @@ static struct platform_device au1200_lcd_device = {
 	.resource       = au1200_lcd_resources,
 };
 
-
-static u64 ide0_dmamask = ~(u32)0;
-
-static struct platform_device au1200_ide0_device = {
-	.name		= "au1200-ide",
-	.id		= 0,
-	.dev = {
-		.dma_mask 		= &ide0_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources = ARRAY_SIZE(au1200_ide0_resources),
-	.resource	= au1200_ide0_resources,
-};
-
 static u64 au1xxx_mmc_dmamask =  ~(u32)0;
 
 static struct platform_device au1xxx_mmc_device = {
@@ -245,31 +265,6 @@ static struct platform_device au1x00_pcmcia_device = {
 	.id 		= 0,
 };
 
-#ifdef CONFIG_MIPS_DB1200
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.name	= "smc91x-regs",
-		.start	= AU1XXX_SMC91111_PHYS_ADDR,
-		.end	= AU1XXX_SMC91111_PHYS_ADDR + 0xfffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AU1XXX_SMC91111_IRQ,
-		.end	= AU1XXX_SMC91111_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-#endif
-
 /* All Alchemy demoboards with I2C have this #define in their headers */
 #ifdef SMBUS_PSC_BASE
 static struct resource pbdb_smbus_resources[] = {
@@ -289,6 +284,7 @@ static struct platform_device pbdb_smbus_device = {
 #endif
 
 static struct platform_device *au1xxx_platform_devices[] __initdata = {
+	&au1xx0_uart_device,
 	&au1xxx_usb_ohci_device,
 	&au1x00_pcmcia_device,
 #ifdef CONFIG_FB_AU1100
@@ -299,12 +295,8 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
 	&au1xxx_usb_gdt_device,
 	&au1xxx_usb_otg_device,
 	&au1200_lcd_device,
-	&au1200_ide0_device,
 	&au1xxx_mmc_device,
 #endif
-#ifdef CONFIG_MIPS_DB1200
-	&smc91x_device,
-#endif
 #ifdef SMBUS_PSC_BASE
 	&pbdb_smbus_device,
 #endif
@@ -312,6 +304,13 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
 
 int __init au1xxx_platform_init(void)
 {
+	unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
+	int i;
+
+	/* Fill up uartclk. */
+	for (i = 0; au1x00_uart_data[i].flags ; i++)
+		au1x00_uart_data[i].uartclk = uartclk;
+
 	return platform_add_devices(au1xxx_platform_devices, ARRAY_SIZE(au1xxx_platform_devices));
 }
 

arch/mips/au1000/common/power.c

@@ -29,17 +29,14 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
+
 #include <linux/init.h>
 #include <linux/pm.h>
 #include <linux/pm_legacy.h>
-#include <linux/slab.h>
 #include <linux/sysctl.h>
 #include <linux/jiffies.h>
 
-#include <asm/string.h>
 #include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/system.h>
 #include <asm/cacheflush.h>
 #include <asm/mach-au1x00/au1000.h>
 
@@ -47,17 +44,13 @@
 
 #define DEBUG 1
 #ifdef DEBUG
-#  define DPRINTK(fmt, args...)	printk("%s: " fmt, __FUNCTION__ , ## args)
+#  define DPRINTK(fmt, args...)	printk("%s: " fmt, __func__, ## args)
 #else
 #  define DPRINTK(fmt, args...)
 #endif
 
 static void au1000_calibrate_delay(void);
 
-extern void set_au1x00_speed(unsigned int new_freq);
-extern unsigned int get_au1x00_speed(void);
-extern unsigned long get_au1x00_uart_baud_base(void);
-extern void set_au1x00_uart_baud_base(unsigned long new_baud_base);
 extern unsigned long save_local_and_disable(int controller);
 extern void restore_local_and_enable(int controller, unsigned long mask);
 extern void local_enable_irq(unsigned int irq_nr);

arch/mips/au1000/common/prom.c

@@ -33,8 +33,8 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
+
 #include <linux/module.h>
-#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/string.h>
 

arch/mips/au1000/common/puts.c

@@ -28,7 +28,6 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/types.h>
 #include <asm/mach-au1x00/au1000.h>
 
 #define SERIAL_BASE   UART_BASE

arch/mips/au1000/common/reset.c

@@ -27,13 +27,7 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/system.h>
+
 #include <asm/mach-au1x00/au1000.h>
 
 extern int au_sleep(void);

arch/mips/au1000/common/setup.c

@@ -25,21 +25,14 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
+
 #include <linux/init.h>
-#include <linux/sched.h>
 #include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/pm.h>
 
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
 #include <asm/mipsregs.h>
 #include <asm/reboot.h>
-#include <asm/pgtable.h>
 #include <asm/time.h>
 
 #include <au1000.h>
@@ -49,8 +42,6 @@ extern void __init board_setup(void);
 extern void au1000_restart(char *);
 extern void au1000_halt(void);
 extern void au1000_power_off(void);
-extern void au1x_time_init(void);
-extern void au1x_timer_setup(struct irqaction *irq);
 extern void set_cpuspec(void);
 
 void __init plat_mem_setup(void)

arch/mips/au1000/common/sleeper.S

@@ -9,9 +9,9 @@
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
+
 #include <asm/asm.h>
 #include <asm/mipsregs.h>
-#include <asm/addrspace.h>
 #include <asm/regdef.h>
 #include <asm/stackframe.h>
 

arch/mips/au1000/common/time.c

 /*
  *
- * Copyright (C) 2001 MontaVista Software, ppopov@mvista.com
+ * Copyright (C) 2001, 2006, 2008 MontaVista Software, <source@mvista.com>
  * Copied and modified Carsten Langgaard's time.c
  *
  * Carsten Langgaard, carstenl@mips.com
@@ -34,23 +34,13 @@
 
 #include <linux/types.h>
 #include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/sched.h>
 #include <linux/spinlock.h>
-#include <linux/hardirq.h>
 
-#include <asm/compiler.h>
 #include <asm/mipsregs.h>
 #include <asm/time.h>
-#include <asm/div64.h>
 #include <asm/mach-au1x00/au1000.h>
 
-#include <linux/mc146818rtc.h>
-#include <linux/timex.h>
-
-static unsigned long r4k_offset; /* Amount to increment compare reg each time */
-static unsigned long r4k_cur;    /* What counter should be at next timer irq */
-int	no_au1xxx_32khz;
+static int no_au1xxx_32khz;
 extern int allow_au1k_wait; /* default off for CP0 Counter */
 
 #ifdef CONFIG_PM
@@ -184,7 +174,7 @@ wakeup_counter0_set(int ticks)
  * "wait" is enabled, and we need to detect if the 32KHz isn't present
  * but requested......got it? :-)		-- Dan
  */
-unsigned long cal_r4koff(void)
+unsigned long calc_clock(void)
 {
 	unsigned long cpu_speed;
 	unsigned long flags;
@@ -229,19 +219,13 @@ unsigned long cal_r4koff(void)
 	// Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16)
 	set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16));
 	spin_unlock_irqrestore(&time_lock, flags);
-	return (cpu_speed / HZ);
+	return cpu_speed;
 }
 
 void __init plat_time_init(void)
 {
-	unsigned int est_freq;
-
-	printk("calculating r4koff... ");
-	r4k_offset = cal_r4koff();
-	printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset);
+	unsigned int est_freq = calc_clock();
 
-	//est_freq = 2*r4k_offset*HZ;
-	est_freq = r4k_offset*HZ;
 	est_freq += 5000;    /* round */
 	est_freq -= est_freq%10000;
 	printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
@@ -249,9 +233,6 @@ void __init plat_time_init(void)
  	set_au1x00_speed(est_freq);
  	set_au1x00_lcd_clock(); // program the LCD clock
 
-	r4k_cur = (read_c0_count() + r4k_offset);
-	write_c0_compare(r4k_cur);
-
 #ifdef CONFIG_PM
 	/*
 	 * setup counter 0, since it keeps ticking after a
@@ -265,12 +246,8 @@ void __init plat_time_init(void)
 	 * Check to ensure we really have a 32KHz oscillator before
 	 * we do this.
 	 */
-	if (no_au1xxx_32khz) {
+	if (no_au1xxx_32khz)
 		printk("WARNING: no 32KHz clock found.\n");
-
-		/* Ensure we get CPO_COUNTER interrupts.  */
-		set_c0_status(IE_IRQ5);
-	}
 	else {
 		while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S);
 		au_writel(0, SYS_TOYWRITE);

arch/mips/au1000/db1x00/board_setup.c

@@ -27,20 +27,9 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
+
 #include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/mc146818rtc.h>
-#include <linux/delay.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/pgtable.h>
+
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-db1x00/db1x00.h>
 

arch/mips/au1000/db1x00/init.c

@@ -28,13 +28,8 @@
  */
 
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-#include <linux/string.h>
 #include <linux/kernel.h>
 
-#include <asm/addrspace.h>
 #include <asm/bootinfo.h>
 
 #include <prom.h>

arch/mips/au1000/db1x00/irqmap.c

@@ -25,26 +25,9 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
-#include <linux/errno.h>
+
 #include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
 
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
 #include <asm/mach-au1x00/au1000.h>
 
 #ifdef CONFIG_MIPS_DB1500

arch/mips/au1000/mtx-1/board_setup.c

@@ -28,19 +28,9 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
+
 #include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/delay.h>
 
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/pgtable.h>
 #include <asm/mach-au1x00/au1000.h>
 
 extern int (*board_pci_idsel)(unsigned int devsel, int assert);

arch/mips/au1000/mtx-1/init.c

@@ -28,14 +28,10 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
-#include <linux/string.h>
+
 #include <linux/kernel.h>
-#include <linux/sched.h>
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/bootmem.h>
 
-#include <asm/addrspace.h>
 #include <asm/bootinfo.h>
 
 #include <prom.h>

arch/mips/au1000/mtx-1/irqmap.c

@@ -25,26 +25,9 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
-#include <linux/errno.h>
+
 #include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
 
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
 #include <asm/mach-au1x00/au1000.h>
 
 char irq_tab_alchemy[][5] __initdata = {

arch/mips/au1000/mtx-1/platform.c

@@ -19,7 +19,6 @@
  */
 
 #include <linux/init.h>
-#include <linux/types.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
 #include <linux/gpio_keys.h>

arch/mips/au1000/pb1000/board_setup.c

@@ -23,19 +23,10 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
+
 #include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/console.h>
 #include <linux/delay.h>
 
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/pgtable.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-pb1x00/pb1000.h>
 

arch/mips/au1000/pb1000/init.c

@@ -26,14 +26,10 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
+
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-#include <linux/string.h>
 #include <linux/kernel.h>
 
-#include <asm/addrspace.h>
 #include <asm/bootinfo.h>
 
 #include <prom.h>

arch/mips/au1000/pb1000/irqmap.c

@@ -25,26 +25,10 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
-#include <linux/errno.h>
+
 #include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
 #include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
 
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
 #include <asm/mach-au1x00/au1000.h>
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {

arch/mips/au1000/pb1100/board_setup.c

@@ -23,19 +23,10 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
+
 #include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/console.h>
 #include <linux/delay.h>
 
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/pgtable.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-pb1x00/pb1100.h>
 

arch/mips/au1000/pb1100/init.c

@@ -27,14 +27,10 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
+
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-#include <linux/string.h>
 #include <linux/kernel.h>
 
-#include <asm/addrspace.h>
 #include <asm/bootinfo.h>
 
 #include <prom.h>

arch/mips/au1000/pb1100/irqmap.c

@@ -25,26 +25,9 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
-#include <linux/errno.h>
+
 #include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
 
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
 #include <asm/mach-au1x00/au1000.h>
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {

arch/mips/au1000/pb1200/Makefile

@@ -3,5 +3,6 @@
 #
 
 lib-y := init.o board_setup.o irqmap.o
+obj-y += platform.o
 
 EXTRA_CFLAGS += -Werror

arch/mips/au1000/pb1200/board_setup.c

@@ -23,27 +23,11 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
+
 #include <linux/init.h>
 #include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/mc146818rtc.h>
-#include <linux/delay.h>
-
-#if defined(CONFIG_BLK_DEV_IDE_AU1XXX)
-#include <linux/ide.h>
-#endif
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/pgtable.h>
 
 #include <au1000.h>
-#include <au1xxx_dbdma.h>
 #include <prom.h>
 
 #ifdef CONFIG_MIPS_PB1200
@@ -52,8 +36,6 @@
 
 #ifdef CONFIG_MIPS_DB1200
 #include <asm/mach-db1x00/db1200.h>
-#define PB1200_ETH_INT DB1200_ETH_INT
-#define PB1200_IDE_INT DB1200_IDE_INT
 #endif
 
 extern void _board_init_irq(void);

arch/mips/au1000/pb1200/init.c

@@ -27,14 +27,10 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
+
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-#include <linux/string.h>
 #include <linux/kernel.h>
 
-#include <asm/addrspace.h>
 #include <asm/bootinfo.h>
 
 #include <prom.h>

arch/mips/au1000/pb1200/irqmap.c

@@ -22,26 +22,10 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
-#include <linux/errno.h>
+
 #include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
 #include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
-
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
+
 #include <asm/mach-au1x00/au1000.h>
 
 #ifdef CONFIG_MIPS_PB1200

arch/mips/au1000/pb1200/platform.c

+/*
+ * Pb1200/DBAu1200 board platform device registration
+ *
+ * Copyright (C) 2008 MontaVista Software Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-au1x00/au1xxx.h>
+
+static struct resource ide_resources[] = {
+	[0] = {
+		.start	= IDE_PHYS_ADDR,
+		.end 	= IDE_PHYS_ADDR + IDE_PHYS_LEN - 1,
+		.flags	= IORESOURCE_MEM
+	},
+	[1] = {
+		.start	= IDE_INT,
+		.end	= IDE_INT,
+		.flags	= IORESOURCE_IRQ
+	}
+};
+
+static u64 ide_dmamask = ~(u32)0;
+
+static struct platform_device ide_device = {
+	.name		= "au1200-ide",
+	.id		= 0,
+	.dev = {
+		.dma_mask 		= &ide_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(ide_resources),
+	.resource	= ide_resources
+};
+
+static struct resource smc91c111_resources[] = {
+	[0] = {
+		.name	= "smc91x-regs",
+		.start	= SMC91C111_PHYS_ADDR,
+		.end	= SMC91C111_PHYS_ADDR + 0xf,
+		.flags	= IORESOURCE_MEM
+	},
+	[1] = {
+		.start	= SMC91C111_INT,
+		.end	= SMC91C111_INT,
+		.flags	= IORESOURCE_IRQ
+	},
+};
+
+static struct platform_device smc91c111_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc91c111_resources),
+	.resource	= smc91c111_resources
+};
+
+static struct platform_device *board_platform_devices[] __initdata = {
+	&ide_device,
+	&smc91c111_device
+};
+
+static int __init board_register_devices(void)
+{
+	return platform_add_devices(board_platform_devices,
+				    ARRAY_SIZE(board_platform_devices));
+}
+
+arch_initcall(board_register_devices);

arch/mips/au1000/pb1500/board_setup.c

@@ -23,19 +23,10 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
+
 #include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/console.h>
 #include <linux/delay.h>
 
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/pgtable.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-pb1x00/pb1500.h>
 

arch/mips/au1000/pb1500/init.c

@@ -27,14 +27,10 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
+
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-#include <linux/string.h>
 #include <linux/kernel.h>
 
-#include <asm/addrspace.h>
 #include <asm/bootinfo.h>
 
 #include <prom.h>

arch/mips/au1000/pb1500/irqmap.c

@@ -25,26 +25,9 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
-#include <linux/errno.h>
+
 #include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
 
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
 #include <asm/mach-au1x00/au1000.h>
 
 char irq_tab_alchemy[][5] __initdata = {

arch/mips/au1000/pb1550/board_setup.c

@@ -27,20 +27,9 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
+
 #include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/mc146818rtc.h>
-#include <linux/delay.h>
 
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/pgtable.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-pb1x00/pb1550.h>
 

arch/mips/au1000/pb1550/init.c

@@ -27,14 +27,10 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
+
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-#include <linux/string.h>
 #include <linux/kernel.h>
 
-#include <asm/addrspace.h>
 #include <asm/bootinfo.h>
 
 #include <prom.h>

arch/mips/au1000/pb1550/irqmap.c

@@ -25,26 +25,9 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
-#include <linux/errno.h>
+
 #include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
 
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
 #include <asm/mach-au1x00/au1000.h>
 
 char irq_tab_alchemy[][5] __initdata = {

arch/mips/au1000/xxs1500/board_setup.c

@@ -23,19 +23,10 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
+
 #include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/console.h>
 #include <linux/delay.h>
 
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/pgtable.h>
 #include <asm/mach-au1x00/au1000.h>
 
 void board_reset(void)

arch/mips/au1000/xxs1500/init.c

@@ -26,14 +26,10 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
+
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-#include <linux/string.h>
 #include <linux/kernel.h>
 
-#include <asm/addrspace.h>
 #include <asm/bootinfo.h>
 
 #include <prom.h>

arch/mips/au1000/xxs1500/irqmap.c

@@ -25,26 +25,9 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
-#include <linux/errno.h>
+
 #include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
 
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
 #include <asm/mach-au1x00/au1000.h>
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {

arch/mips/configs/mipssim_defconfig

@@ -641,7 +641,6 @@ CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="nfsroot=192.168.192.169:/u1/mipsel,timeo=20 ip=dhcp"
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_RUNTIME_DEBUG is not set
-# CONFIG_MIPS_UNCACHED is not set
 
 #
 # Security options

arch/mips/configs/pnx8550-jbs_defconfig

@@ -1223,7 +1223,6 @@ CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
 # CONFIG_KGDB is not set
 CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
-# CONFIG_MIPS_UNCACHED is not set
 
 #
 # Security options

arch/mips/configs/pnx8550-stb810_defconfig

@@ -1213,7 +1213,6 @@ CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
 # CONFIG_KGDB is not set
 CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
-# CONFIG_MIPS_UNCACHED is not set
 
 #
 # Security options

arch/mips/dec/time.c

@@ -9,30 +9,15 @@
  *
  */
 #include <linux/bcd.h>
-#include <linux/errno.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
 #include <linux/mc146818rtc.h>
-#include <linux/mm.h>
-#include <linux/module.h>
 #include <linux/param.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/time.h>
-#include <linux/types.h>
-
-#include <asm/bootinfo.h>
-#include <asm/cpu.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/sections.h>
-#include <asm/time.h>
 
+#include <asm/cpu-features.h>
+#include <asm/ds1287.h>
+#include <asm/time.h>
 #include <asm/dec/interrupts.h>
 #include <asm/dec/ioasic.h>
-#include <asm/dec/ioasic_addrs.h>
 #include <asm/dec/machtype.h>
 
 unsigned long read_persistent_clock(void)
@@ -139,42 +124,32 @@ int rtc_mips_set_mmss(unsigned long nowtime)
 	return retval;
 }
 
-static int dec_timer_state(void)
+void __init plat_time_init(void)
 {
-	return (CMOS_READ(RTC_REG_C) & RTC_PF) != 0;
-}
+	u32 start, end;
+	int i = HZ / 10;
 
-static void dec_timer_ack(void)
-{
-	CMOS_READ(RTC_REG_C);			/* Ack the RTC interrupt.  */
-}
-
-static cycle_t dec_ioasic_hpt_read(void)
-{
-	/*
-	 * The free-running counter is 32-bit which is good for about
-	 * 2 minutes, 50 seconds at possible count rates of up to 25MHz.
-	 */
-	return ioasic_read(IO_REG_FCTR);
-}
+	/* Set up the rate of periodic DS1287 interrupts. */
+	ds1287_set_base_clock(HZ);
 
+	if (cpu_has_counter) {
+		while (!ds1287_timer_state())
+			;
 
-void __init plat_time_init(void)
-{
-	mips_timer_ack = dec_timer_ack;
+		start = read_c0_count();
 
-	if (!cpu_has_counter && IOASIC)
-		/* For pre-R4k systems we use the I/O ASIC's counter.  */
-		clocksource_mips.read = dec_ioasic_hpt_read;
+		while (i--)
+			while (!ds1287_timer_state())
+				;
 
-	/* Set up the rate of periodic DS1287 interrupts.  */
-	CMOS_WRITE(RTC_REF_CLCK_32KHZ | (16 - __ffs(HZ)), RTC_REG_A);
-}
+		end = read_c0_count();
 
-void __init plat_timer_setup(struct irqaction *irq)
-{
-	setup_irq(dec_interrupt[DEC_IRQ_RTC], irq);
+		mips_hpt_frequency = (end - start) * 10;
+		printk(KERN_INFO "MIPS counter frequency %dHz\n",
+			mips_hpt_frequency);
+	} else if (IOASIC)
+		/* For pre-R4k systems we use the I/O ASIC's counter.  */
+		dec_ioasic_clocksource_init();
 
-	/* Enable periodic DS1287 interrupts.  */
-	CMOS_WRITE(CMOS_READ(RTC_REG_B) | RTC_PIE, RTC_REG_B);
+	ds1287_clockevent_init(dec_interrupt[DEC_IRQ_RTC]);
 }

arch/mips/jmr3927/rbhma3100/setup.c

@@ -36,11 +36,13 @@
 #include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/gpio.h>
 #ifdef CONFIG_SERIAL_TXX9
 #include <linux/serial_core.h>
 #endif
 
 #include <asm/txx9tmr.h>
+#include <asm/txx9pio.h>
 #include <asm/reboot.h>
 #include <asm/jmr3927/jmr3927.h>
 #include <asm/mipsregs.h>
@@ -340,9 +342,12 @@ static void __init tx3927_setup(void)
 
 	/* PIO */
 	/* PIO[15:12] connected to LEDs */
-	tx3927_pioptr->dir = 0x0000f000;
-	tx3927_pioptr->maskcpu = 0;
-	tx3927_pioptr->maskext = 0;
+	__raw_writel(0x0000f000, &tx3927_pioptr->dir);
+	__raw_writel(0, &tx3927_pioptr->maskcpu);
+	__raw_writel(0, &tx3927_pioptr->maskext);
+	txx9_gpio_init(TX3927_PIO_REG, 0, 16);
+	gpio_request(11, "dipsw1");
+	gpio_request(10, "dipsw2");
 	{
 		unsigned int conf;
 

arch/mips/kernel/Makefile

@@ -10,12 +10,15 @@ obj-y		+= cpu-probe.o branch.o entry.o genex.o irq.o process.o \
 
 obj-$(CONFIG_CEVT_BCM1480)	+= cevt-bcm1480.o
 obj-$(CONFIG_CEVT_R4K)		+= cevt-r4k.o
+obj-$(CONFIG_CEVT_DS1287)	+= cevt-ds1287.o
 obj-$(CONFIG_CEVT_GT641XX)	+= cevt-gt641xx.o
 obj-$(CONFIG_CEVT_SB1250)	+= cevt-sb1250.o
 obj-$(CONFIG_CEVT_TXX9)		+= cevt-txx9.o
 obj-$(CONFIG_CSRC_BCM1480)	+= csrc-bcm1480.o
+obj-$(CONFIG_CSRC_IOASIC)	+= csrc-ioasic.o
 obj-$(CONFIG_CSRC_R4K)		+= csrc-r4k.o
 obj-$(CONFIG_CSRC_SB1250)	+= csrc-sb1250.o
+obj-$(CONFIG_SYNC_R4K)		+= sync-r4k.o
 
 binfmt_irix-objs	:= irixelf.o irixinv.o irixioctl.o irixsig.o	\
 			   irix5sys.o sysirix.o
@@ -50,6 +53,8 @@ obj-$(CONFIG_MIPS_MT)		+= mips-mt.o
 obj-$(CONFIG_MIPS_MT_FPAFF)	+= mips-mt-fpaff.o
 obj-$(CONFIG_MIPS_MT_SMTC)	+= smtc.o smtc-asm.o smtc-proc.o
 obj-$(CONFIG_MIPS_MT_SMP)	+= smp-mt.o
+obj-$(CONFIG_MIPS_CMP)		+= smp-cmp.o
+obj-$(CONFIG_CPU_MIPSR2)	+= spram.o
 
 obj-$(CONFIG_MIPS_APSP_KSPD)	+= kspd.o
 obj-$(CONFIG_MIPS_VPE_LOADER)	+= vpe.o
@@ -62,6 +67,7 @@ obj-$(CONFIG_IRQ_CPU_RM9K)	+= irq-rm9000.o
 obj-$(CONFIG_MIPS_BOARDS_GEN)	+= irq-msc01.o
 obj-$(CONFIG_IRQ_TXX9)		+= irq_txx9.o
 obj-$(CONFIG_IRQ_GT641XX)	+= irq-gt641xx.o
+obj-$(CONFIG_IRQ_GIC)		+= irq-gic.o
 
 obj-$(CONFIG_32BIT)		+= scall32-o32.o
 obj-$(CONFIG_64BIT)		+= scall64-64.o
@@ -77,6 +83,8 @@ obj-$(CONFIG_64BIT)		+= cpu-bugs64.o
 
 obj-$(CONFIG_I8253)		+= i8253.o
 
+obj-$(CONFIG_GPIO_TXX9)		+= gpio_txx9.o
+
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 

arch/mips/kernel/cevt-ds1287.c

+/*
+ *  DS1287 clockevent driver
+ *
+ *  Copyright (C) 2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/clockchips.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/mc146818rtc.h>
+
+#include <asm/time.h>
+
+int ds1287_timer_state(void)
+{
+	return (CMOS_READ(RTC_REG_C) & RTC_PF) != 0;
+}
+
+int ds1287_set_base_clock(unsigned int hz)
+{
+	u8 rate;
+
+	switch (hz) {
+	case 128:
+		rate = 0x9;
+		break;
+	case 256:
+		rate = 0x8;
+		break;
+	case 1024:
+		rate = 0x6;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	CMOS_WRITE(RTC_REF_CLCK_32KHZ | rate, RTC_REG_A);
+
+	return 0;
+}
+
+static int ds1287_set_next_event(unsigned long delta,
+				 struct clock_event_device *evt)
+{
+	return -EINVAL;
+}
+
+static void ds1287_set_mode(enum clock_event_mode mode,
+			    struct clock_event_device *evt)
+{
+	u8 val;
+
+	spin_lock(&rtc_lock);
+
+	val = CMOS_READ(RTC_REG_B);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		val |= RTC_PIE;
+		break;
+	default:
+		val &= ~RTC_PIE;
+		break;
+	}
+
+	CMOS_WRITE(val, RTC_REG_B);
+
+	spin_unlock(&rtc_lock);
+}
+
+static void ds1287_event_handler(struct clock_event_device *dev)
+{
+}
+
+static struct clock_event_device ds1287_clockevent = {
+	.name		= "ds1287",
+	.features	= CLOCK_EVT_FEAT_PERIODIC,
+	.cpumask	= CPU_MASK_CPU0,
+	.set_next_event	= ds1287_set_next_event,
+	.set_mode	= ds1287_set_mode,
+	.event_handler	= ds1287_event_handler,
+};
+
+static irqreturn_t ds1287_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *cd = &ds1287_clockevent;
+
+	/* Ack the RTC interrupt. */
+	CMOS_READ(RTC_REG_C);
+
+	cd->event_handler(cd);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction ds1287_irqaction = {
+	.handler	= ds1287_interrupt,
+	.flags		= IRQF_DISABLED | IRQF_PERCPU,
+	.name		= "ds1287",
+};
+
+int __init ds1287_clockevent_init(int irq)
+{
+	struct clock_event_device *cd;
+
+	cd = &ds1287_clockevent;
+	cd->rating = 100;
+	cd->irq = irq;
+	clockevent_set_clock(cd, 32768);
+	cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd);
+	cd->min_delta_ns = clockevent_delta2ns(0x300, cd);
+
+	clockevents_register_device(&ds1287_clockevent);
+
+	return setup_irq(irq, &ds1287_irqaction);
+}

arch/mips/kernel/cevt-gt641xx.c

@@ -25,8 +25,6 @@
 #include <asm/gt64120.h>
 #include <asm/time.h>
 
-#include <irq.h>
-
 static DEFINE_SPINLOCK(gt641xx_timer_lock);
 static unsigned int gt641xx_base_clock;
 

arch/mips/kernel/cpu-probe.c

@@ -169,6 +169,7 @@ static inline void check_wait(void)
 
 	case CPU_24K:
 	case CPU_34K:
+	case CPU_1004K:
 		cpu_wait = r4k_wait;
 		if (read_c0_config7() & MIPS_CONF7_WII)
 			cpu_wait = r4k_wait_irqoff;
@@ -675,6 +676,12 @@ static void __cpuinit decode_configs(struct cpuinfo_mips *c)
 		return;
 }
 
+#ifdef CONFIG_CPU_MIPSR2
+extern void spram_config(void);
+#else
+static inline void spram_config(void) {}
+#endif
+
 static inline void cpu_probe_mips(struct cpuinfo_mips *c)
 {
 	decode_configs(c);
@@ -711,7 +718,12 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c)
 	case PRID_IMP_74K:
 		c->cputype = CPU_74K;
 		break;
+	case PRID_IMP_1004K:
+		c->cputype = CPU_1004K;
+		break;
 	}
+
+	spram_config();
 }
 
 static inline void cpu_probe_alchemy(struct cpuinfo_mips *c)
@@ -778,7 +790,7 @@ static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c)
 	}
 }
 
-static inline void cpu_probe_philips(struct cpuinfo_mips *c)
+static inline void cpu_probe_nxp(struct cpuinfo_mips *c)
 {
 	decode_configs(c);
 	switch (c->processor_id & 0xff00) {
@@ -787,7 +799,7 @@ static inline void cpu_probe_philips(struct cpuinfo_mips *c)
 		c->isa_level = MIPS_CPU_ISA_M32R1;
 		break;
 	default:
-		panic("Unknown Philips Core!"); /* REVISIT: die? */
+		panic("Unknown NXP Core!"); /* REVISIT: die? */
 		break;
 	}
 }
@@ -876,6 +888,7 @@ static __cpuinit const char *cpu_to_name(struct cpuinfo_mips *c)
 	case CPU_24K:		name = "MIPS 24K"; break;
 	case CPU_25KF:		name = "MIPS 25Kf"; break;
 	case CPU_34K:		name = "MIPS 34K"; break;
+	case CPU_1004K:		name = "MIPS 1004K"; break;
 	case CPU_74K:		name = "MIPS 74K"; break;
 	case CPU_VR4111:	name = "NEC VR4111"; break;
 	case CPU_VR4121:	name = "NEC VR4121"; break;
@@ -925,8 +938,8 @@ __cpuinit void cpu_probe(void)
 	case PRID_COMP_SANDCRAFT:
 		cpu_probe_sandcraft(c);
 		break;
- 	case PRID_COMP_PHILIPS:
-		cpu_probe_philips(c);
+	case PRID_COMP_NXP:
+		cpu_probe_nxp(c);
 		break;
 	default:
 		c->cputype = CPU_UNKNOWN;

arch/mips/kernel/csrc-ioasic.c

+/*
+ *  DEC I/O ASIC's counter clocksource
+ *
+ *  Copyright (C) 2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/clocksource.h>
+#include <linux/init.h>
+
+#include <asm/ds1287.h>
+#include <asm/time.h>
+#include <asm/dec/ioasic.h>
+#include <asm/dec/ioasic_addrs.h>
+
+static cycle_t dec_ioasic_hpt_read(void)
+{
+	return ioasic_read(IO_REG_FCTR);
+}
+
+static struct clocksource clocksource_dec = {
+	.name		= "dec-ioasic",
+	.read		= dec_ioasic_hpt_read,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+void __init dec_ioasic_clocksource_init(void)
+{
+	unsigned int freq;
+	u32 start, end;
+	int i = HZ / 10;
+
+
+	while (!ds1287_timer_state())
+		;
+
+	start = dec_ioasic_hpt_read();
+
+	while (i--)
+		while (!ds1287_timer_state())
+			;
+
+	end = dec_ioasic_hpt_read();
+
+	freq = (end - start) * 10;
+	printk(KERN_INFO "I/O ASIC clock frequency %dHz\n", freq);
+
+	clocksource_dec.rating = 200 + freq / 10000000;
+	clocksource_set_clock(&clocksource_dec, freq);
+
+	clocksource_register(&clocksource_dec);
+}

arch/mips/kernel/gpio_txx9.c

+/*
+ * A gpio chip driver for TXx9 SoCs
+ *
+ * Copyright (C) 2008 Atsushi Nemoto <anemo@mba.ocn.ne.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/gpio.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <asm/txx9pio.h>
+
+static DEFINE_SPINLOCK(txx9_gpio_lock);
+
+static struct txx9_pio_reg __iomem *txx9_pioptr;
+
+static int txx9_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	return __raw_readl(&txx9_pioptr->din) & (1 << offset);
+}
+
+static void txx9_gpio_set_raw(unsigned int offset, int value)
+{
+	u32 val;
+	val = __raw_readl(&txx9_pioptr->dout);
+	if (value)
+		val |= 1 << offset;
+	else
+		val &= ~(1 << offset);
+	__raw_writel(val, &txx9_pioptr->dout);
+}
+
+static void txx9_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			  int value)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&txx9_gpio_lock, flags);
+	txx9_gpio_set_raw(offset, value);
+	mmiowb();
+	spin_unlock_irqrestore(&txx9_gpio_lock, flags);
+}
+
+static int txx9_gpio_dir_in(struct gpio_chip *chip, unsigned int offset)
+{
+	spin_lock_irq(&txx9_gpio_lock);
+	__raw_writel(__raw_readl(&txx9_pioptr->dir) & ~(1 << offset),
+		     &txx9_pioptr->dir);
+	mmiowb();
+	spin_unlock_irq(&txx9_gpio_lock);
+	return 0;
+}
+
+static int txx9_gpio_dir_out(struct gpio_chip *chip, unsigned int offset,
+			     int value)
+{
+	spin_lock_irq(&txx9_gpio_lock);
+	txx9_gpio_set_raw(offset, value);
+	__raw_writel(__raw_readl(&txx9_pioptr->dir) | (1 << offset),
+		     &txx9_pioptr->dir);
+	mmiowb();
+	spin_unlock_irq(&txx9_gpio_lock);
+	return 0;
+}
+
+static struct gpio_chip txx9_gpio_chip = {
+	.get = txx9_gpio_get,
+	.set = txx9_gpio_set,
+	.direction_input = txx9_gpio_dir_in,
+	.direction_output = txx9_gpio_dir_out,
+	.label = "TXx9",
+};
+
+int __init txx9_gpio_init(unsigned long baseaddr,
+			  unsigned int base, unsigned int num)
+{
+	txx9_pioptr = ioremap(baseaddr, sizeof(struct txx9_pio_reg));
+	if (!txx9_pioptr)
+		return -ENODEV;
+	txx9_gpio_chip.base = base;
+	txx9_gpio_chip.ngpio = num;
+	return gpiochip_add(&txx9_gpio_chip);
+}

arch/mips/kernel/irq-gic.c

+#undef DEBUG
+
+#include <linux/bitmap.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/gic.h>
+#include <asm/gcmpregs.h>
+#include <asm/mips-boards/maltaint.h>
+#include <asm/irq.h>
+#include <linux/hardirq.h>
+#include <asm-generic/bitops/find.h>
+
+
+static unsigned long _gic_base;
+static unsigned int _irqbase, _mapsize, numvpes, numintrs;
+static struct gic_intr_map *_intrmap;
+
+static struct gic_pcpu_mask pcpu_masks[NR_CPUS];
+static struct gic_pending_regs pending_regs[NR_CPUS];
+static struct gic_intrmask_regs intrmask_regs[NR_CPUS];
+
+#define gic_wedgeb2bok 0	/*
+				 * Can GIC handle b2b writes to wedge register?
+				 */
+#if gic_wedgeb2bok == 0
+static DEFINE_SPINLOCK(gic_wedgeb2b_lock);
+#endif
+
+void gic_send_ipi(unsigned int intr)
+{
+#if gic_wedgeb2bok == 0
+	unsigned long flags;
+#endif
+	pr_debug("CPU%d: %s status %08x\n", smp_processor_id(), __func__,
+		 read_c0_status());
+	if (!gic_wedgeb2bok)
+		spin_lock_irqsave(&gic_wedgeb2b_lock, flags);
+	GICWRITE(GIC_REG(SHARED, GIC_SH_WEDGE), 0x80000000 | intr);
+	if (!gic_wedgeb2bok) {
+		(void) GIC_REG(SHARED, GIC_SH_CONFIG);
+		spin_unlock_irqrestore(&gic_wedgeb2b_lock, flags);
+	}
+}
+
+/* This is Malta specific and needs to be exported */
+static void vpe_local_setup(unsigned int numvpes)
+{
+	int i;
+	unsigned long timer_interrupt = 5, perf_interrupt = 5;
+	unsigned int vpe_ctl;
+
+	/*
+	 * Setup the default performance counter timer interrupts
+	 * for all VPEs
+	 */
+	for (i = 0; i < numvpes; i++) {
+		GICWRITE(GIC_REG(VPE_LOCAL, GIC_VPE_OTHER_ADDR), i);
+
+		/* Are Interrupts locally routable? */
+		GICREAD(GIC_REG(VPE_OTHER, GIC_VPE_CTL), vpe_ctl);
+		if (vpe_ctl & GIC_VPE_CTL_TIMER_RTBL_MSK)
+			GICWRITE(GIC_REG(VPE_OTHER, GIC_VPE_TIMER_MAP),
+				 GIC_MAP_TO_PIN_MSK | timer_interrupt);
+
+		if (vpe_ctl & GIC_VPE_CTL_PERFCNT_RTBL_MSK)
+			GICWRITE(GIC_REG(VPE_OTHER, GIC_VPE_PERFCTR_MAP),
+				 GIC_MAP_TO_PIN_MSK | perf_interrupt);
+	}
+}
+
+unsigned int gic_get_int(void)
+{
+	unsigned int i;
+	unsigned long *pending, *intrmask, *pcpu_mask;
+	unsigned long *pending_abs, *intrmask_abs;
+
+	/* Get per-cpu bitmaps */
+	pending = pending_regs[smp_processor_id()].pending;
+	intrmask = intrmask_regs[smp_processor_id()].intrmask;
+	pcpu_mask = pcpu_masks[smp_processor_id()].pcpu_mask;
+
+	pending_abs = (unsigned long *) GIC_REG_ABS_ADDR(SHARED,
+							 GIC_SH_PEND_31_0_OFS);
+	intrmask_abs = (unsigned long *) GIC_REG_ABS_ADDR(SHARED,
+							  GIC_SH_MASK_31_0_OFS);
+
+	for (i = 0; i < BITS_TO_LONGS(GIC_NUM_INTRS); i++) {
+		GICREAD(*pending_abs, pending[i]);
+		GICREAD(*intrmask_abs, intrmask[i]);
+		pending_abs++;
+		intrmask_abs++;
+	}
+
+	bitmap_and(pending, pending, intrmask, GIC_NUM_INTRS);
+	bitmap_and(pending, pending, pcpu_mask, GIC_NUM_INTRS);
+
+	i = find_first_bit(pending, GIC_NUM_INTRS);
+
+	pr_debug("CPU%d: %s pend=%d\n", smp_processor_id(), __func__, i);
+
+	return i;
+}
+
+static unsigned int gic_irq_startup(unsigned int irq)
+{
+	pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
+	irq -= _irqbase;
+	/* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */
+	GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_SMASK_31_0_OFS + (irq / 32))),
+		 1 << (irq % 32));
+	return 0;
+}
+
+static void gic_irq_ack(unsigned int irq)
+{
+#if gic_wedgeb2bok == 0
+	unsigned long flags;
+#endif
+	pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
+	irq -= _irqbase;
+	GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_RMASK_31_0_OFS + (irq / 32))),
+		 1 << (irq % 32));
+
+	if (_intrmap[irq].trigtype == GIC_TRIG_EDGE) {
+		if (!gic_wedgeb2bok)
+			spin_lock_irqsave(&gic_wedgeb2b_lock, flags);
+		GICWRITE(GIC_REG(SHARED, GIC_SH_WEDGE), irq);
+		if (!gic_wedgeb2bok) {
+			(void) GIC_REG(SHARED, GIC_SH_CONFIG);
+			spin_unlock_irqrestore(&gic_wedgeb2b_lock, flags);
+		}
+	}
+}
+
+static void gic_mask_irq(unsigned int irq)
+{
+	pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
+	irq -= _irqbase;
+	/* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */
+	GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_RMASK_31_0_OFS + (irq / 32))),
+		 1 << (irq % 32));
+}
+
+static void gic_unmask_irq(unsigned int irq)
+{
+	pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
+	irq -= _irqbase;
+	/* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */
+	GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_SMASK_31_0_OFS + (irq / 32))),
+		 1 << (irq % 32));
+}
+
+#ifdef CONFIG_SMP
+
+static DEFINE_SPINLOCK(gic_lock);
+
+static void gic_set_affinity(unsigned int irq, cpumask_t cpumask)
+{
+	cpumask_t	tmp = CPU_MASK_NONE;
+	unsigned long	flags;
+	int		i;
+
+	pr_debug(KERN_DEBUG "%s called\n", __func__);
+	irq -= _irqbase;
+
+	cpus_and(tmp, cpumask, cpu_online_map);
+	if (cpus_empty(tmp))
+		return;
+
+	/* Assumption : cpumask refers to a single CPU */
+	spin_lock_irqsave(&gic_lock, flags);
+	for (;;) {
+		/* Re-route this IRQ */
+		GIC_SH_MAP_TO_VPE_SMASK(irq, first_cpu(tmp));
+
+		/*
+		 * FIXME: assumption that _intrmap is ordered and has no holes
+		 */
+
+		/* Update the intr_map */
+		_intrmap[irq].cpunum = first_cpu(tmp);
+
+		/* Update the pcpu_masks */
+		for (i = 0; i < NR_CPUS; i++)
+			clear_bit(irq, pcpu_masks[i].pcpu_mask);
+		set_bit(irq, pcpu_masks[first_cpu(tmp)].pcpu_mask);
+
+	}
+	irq_desc[irq].affinity = cpumask;
+	spin_unlock_irqrestore(&gic_lock, flags);
+
+}
+#endif
+
+static struct irq_chip gic_irq_controller = {
+	.name		=	"MIPS GIC",
+	.startup	=	gic_irq_startup,
+	.ack		=	gic_irq_ack,
+	.mask		=	gic_mask_irq,
+	.mask_ack	=	gic_mask_irq,
+	.unmask		=	gic_unmask_irq,
+	.eoi		=	gic_unmask_irq,
+#ifdef CONFIG_SMP
+	.set_affinity	=	gic_set_affinity,
+#endif
+};
+
+static void __init setup_intr(unsigned int intr, unsigned int cpu,
+	unsigned int pin, unsigned int polarity, unsigned int trigtype)
+{
+	/* Setup Intr to Pin mapping */
+	if (pin & GIC_MAP_TO_NMI_MSK) {
+		GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_MAP_TO_PIN(intr)), pin);
+		/* FIXME: hack to route NMI to all cpu's */
+		for (cpu = 0; cpu < NR_CPUS; cpu += 32) {
+			GICWRITE(GIC_REG_ADDR(SHARED,
+					  GIC_SH_MAP_TO_VPE_REG_OFF(intr, cpu)),
+				 0xffffffff);
+		}
+	} else {
+		GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_MAP_TO_PIN(intr)),
+			 GIC_MAP_TO_PIN_MSK | pin);
+		/* Setup Intr to CPU mapping */
+		GIC_SH_MAP_TO_VPE_SMASK(intr, cpu);
+	}
+
+	/* Setup Intr Polarity */
+	GIC_SET_POLARITY(intr, polarity);
+
+	/* Setup Intr Trigger Type */
+	GIC_SET_TRIGGER(intr, trigtype);
+
+	/* Init Intr Masks */
+	GIC_SET_INTR_MASK(intr, 0);
+}
+
+static void __init gic_basic_init(void)
+{
+	unsigned int i, cpu;
+
+	/* Setup defaults */
+	for (i = 0; i < GIC_NUM_INTRS; i++) {
+		GIC_SET_POLARITY(i, GIC_POL_POS);
+		GIC_SET_TRIGGER(i, GIC_TRIG_LEVEL);
+		GIC_SET_INTR_MASK(i, 0);
+	}
+
+	/* Setup specifics */
+	for (i = 0; i < _mapsize; i++) {
+		cpu = _intrmap[i].cpunum;
+		if (cpu == X)
+			continue;
+
+		setup_intr(_intrmap[i].intrnum,
+				_intrmap[i].cpunum,
+				_intrmap[i].pin,
+				_intrmap[i].polarity,
+				_intrmap[i].trigtype);
+		/* Initialise per-cpu Interrupt software masks */
+		if (_intrmap[i].ipiflag)
+			set_bit(_intrmap[i].intrnum, pcpu_masks[cpu].pcpu_mask);
+	}
+
+	vpe_local_setup(numvpes);
+
+	for (i = _irqbase; i < (_irqbase + numintrs); i++)
+		set_irq_chip(i, &gic_irq_controller);
+}
+
+void __init gic_init(unsigned long gic_base_addr,
+		     unsigned long gic_addrspace_size,
+		     struct gic_intr_map *intr_map, unsigned int intr_map_size,
+		     unsigned int irqbase)
+{
+	unsigned int gicconfig;
+
+	_gic_base = (unsigned long) ioremap_nocache(gic_base_addr,
+						    gic_addrspace_size);
+	_irqbase = irqbase;
+	_intrmap = intr_map;
+	_mapsize = intr_map_size;
+
+	GICREAD(GIC_REG(SHARED, GIC_SH_CONFIG), gicconfig);
+	numintrs = (gicconfig & GIC_SH_CONFIG_NUMINTRS_MSK) >>
+		   GIC_SH_CONFIG_NUMINTRS_SHF;
+	numintrs = ((numintrs + 1) * 8);
+
+	numvpes = (gicconfig & GIC_SH_CONFIG_NUMVPES_MSK) >>
+		  GIC_SH_CONFIG_NUMVPES_SHF;
+
+	pr_debug("%s called\n", __func__);
+
+	gic_basic_init();
+}

arch/mips/kernel/irq-msc01.c

@@ -17,6 +17,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/msc01_ic.h>
+#include <asm/traps.h>
 
 static unsigned long _icctrl_msc;
 #define MSC01_IC_REG_BASE	_icctrl_msc
@@ -98,14 +99,13 @@ void ll_msc_irq(void)
 	}
 }
 
-void
-msc_bind_eic_interrupt(unsigned int irq, unsigned int set)
+static void msc_bind_eic_interrupt(int irq, int set)
 {
 	MSCIC_WRITE(MSC01_IC_RAMW,
 		    (irq<<MSC01_IC_RAMW_ADDR_SHF) | (set<<MSC01_IC_RAMW_DATA_SHF));
 }
 
-struct irq_chip msc_levelirq_type = {
+static struct irq_chip msc_levelirq_type = {
 	.name = "SOC-it-Level",
 	.ack = level_mask_and_ack_msc_irq,
 	.mask = mask_msc_irq,
@@ -115,7 +115,7 @@ struct irq_chip msc_levelirq_type = {
 	.end = end_msc_irq,
 };
 
-struct irq_chip msc_edgeirq_type = {
+static struct irq_chip msc_edgeirq_type = {
 	.name = "SOC-it-Edge",
 	.ack = edge_mask_and_ack_msc_irq,
 	.mask = mask_msc_irq,
@@ -128,8 +128,6 @@ struct irq_chip msc_edgeirq_type = {
 
 void __init init_msc_irqs(unsigned long icubase, unsigned int irqbase, msc_irqmap_t *imp, int nirq)
 {
-	extern void (*board_bind_eic_interrupt)(unsigned int irq, unsigned int regset);
-
 	_icctrl_msc = (unsigned long) ioremap(icubase, 0x40000);
 
 	/* Reset interrupt controller - initialises all registers to 0 */

arch/mips/kernel/signal-common.h

@@ -14,7 +14,7 @@
 /* #define DEBUG_SIG */
 
 #ifdef DEBUG_SIG
-#  define DEBUGP(fmt, args...) printk("%s: " fmt, __FUNCTION__ , ##args)
+#  define DEBUGP(fmt, args...) printk("%s: " fmt, __func__, ##args)
 #else
 #  define DEBUGP(fmt, args...)
 #endif

arch/mips/kernel/smp-cmp.c

+/*
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Copyright (C) 2007 MIPS Technologies, Inc.
+ *    Chris Dearman (chris@mips.com)
+ */
+
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+#include <linux/compiler.h>
+
+#include <asm/atomic.h>
+#include <asm/cacheflush.h>
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/hardirq.h>
+#include <asm/mmu_context.h>
+#include <asm/smp.h>
+#include <asm/time.h>
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#include <asm/mips_mt.h>
+
+/*
+ * Crude manipulation of the CPU masks to control which
+ * which CPU's are brought online during initialisation
+ *
+ * Beware... this needs to be called after CPU discovery
+ * but before CPU bringup
+ */
+static int __init allowcpus(char *str)
+{
+	cpumask_t cpu_allow_map;
+	char buf[256];
+	int len;
+
+	cpus_clear(cpu_allow_map);
+	if (cpulist_parse(str, cpu_allow_map) == 0) {
+		cpu_set(0, cpu_allow_map);
+		cpus_and(cpu_possible_map, cpu_possible_map, cpu_allow_map);
+		len = cpulist_scnprintf(buf, sizeof(buf)-1, cpu_possible_map);
+		buf[len] = '\0';
+		pr_debug("Allowable CPUs: %s\n", buf);
+		return 1;
+	} else
+		return 0;
+}
+__setup("allowcpus=", allowcpus);
+
+static void ipi_call_function(unsigned int cpu)
+{
+	unsigned int action = 0;
+
+	pr_debug("CPU%d: %s cpu %d status %08x\n",
+		 smp_processor_id(), __func__, cpu, read_c0_status());
+
+	switch (cpu) {
+	case 0:
+		action = GIC_IPI_EXT_INTR_CALLFNC_VPE0;
+		break;
+	case 1:
+		action = GIC_IPI_EXT_INTR_CALLFNC_VPE1;
+		break;
+	case 2:
+		action = GIC_IPI_EXT_INTR_CALLFNC_VPE2;
+		break;
+	case 3:
+		action = GIC_IPI_EXT_INTR_CALLFNC_VPE3;
+		break;
+	}
+	gic_send_ipi(action);
+}
+
+
+static void ipi_resched(unsigned int cpu)
+{
+	unsigned int action = 0;
+
+	pr_debug("CPU%d: %s cpu %d status %08x\n",
+		 smp_processor_id(), __func__, cpu, read_c0_status());
+
+	switch (cpu) {
+	case 0:
+		action = GIC_IPI_EXT_INTR_RESCHED_VPE0;
+		break;
+	case 1:
+		action = GIC_IPI_EXT_INTR_RESCHED_VPE1;
+		break;
+	case 2:
+		action = GIC_IPI_EXT_INTR_RESCHED_VPE2;
+		break;
+	case 3:
+		action = GIC_IPI_EXT_INTR_RESCHED_VPE3;
+		break;
+	}
+	gic_send_ipi(action);
+}
+
+/*
+ * FIXME: This isn't restricted to CMP
+ * The SMVP kernel could use GIC interrupts if available
+ */
+void cmp_send_ipi_single(int cpu, unsigned int action)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	switch (action) {
+	case SMP_CALL_FUNCTION:
+		ipi_call_function(cpu);
+		break;
+
+	case SMP_RESCHEDULE_YOURSELF:
+		ipi_resched(cpu);
+		break;
+	}
+
+	local_irq_restore(flags);
+}
+
+static void cmp_send_ipi_mask(cpumask_t mask, unsigned int action)
+{
+	unsigned int i;
+
+	for_each_cpu_mask(i, mask)
+		cmp_send_ipi_single(i, action);
+}
+
+static void cmp_init_secondary(void)
+{
+	struct cpuinfo_mips *c = &current_cpu_data;
+
+	/* Assume GIC is present */
+	change_c0_status(ST0_IM, STATUSF_IP3 | STATUSF_IP4 | STATUSF_IP6 |
+				 STATUSF_IP7);
+
+	/* Enable per-cpu interrupts: platform specific */
+
+	c->core = (read_c0_ebase() >> 1) & 0xff;
+#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
+	c->vpe_id = (read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE;
+#endif
+#ifdef CONFIG_MIPS_MT_SMTC
+	c->tc_id  = (read_c0_tcbind() >> TCBIND_CURTC_SHIFT) & TCBIND_CURTC;
+#endif
+}
+
+static void cmp_smp_finish(void)
+{
+	pr_debug("SMPCMP: CPU%d: %s\n", smp_processor_id(), __func__);
+
+	/* CDFIXME: remove this? */
+	write_c0_compare(read_c0_count() + (8 * mips_hpt_frequency / HZ));
+
+#ifdef CONFIG_MIPS_MT_FPAFF
+	/* If we have an FPU, enroll ourselves in the FPU-full mask */
+	if (cpu_has_fpu)
+		cpu_set(smp_processor_id(), mt_fpu_cpumask);
+#endif /* CONFIG_MIPS_MT_FPAFF */
+
+	local_irq_enable();
+}
+
+static void cmp_cpus_done(void)
+{
+	pr_debug("SMPCMP: CPU%d: %s\n", smp_processor_id(), __func__);
+}
+
+/*
+ * Setup the PC, SP, and GP of a secondary processor and start it running
+ * smp_bootstrap is the place to resume from
+ * __KSTK_TOS(idle) is apparently the stack pointer
+ * (unsigned long)idle->thread_info the gp
+ */
+static void cmp_boot_secondary(int cpu, struct task_struct *idle)
+{
+	struct thread_info *gp = task_thread_info(idle);
+	unsigned long sp = __KSTK_TOS(idle);
+	unsigned long pc = (unsigned long)&smp_bootstrap;
+	unsigned long a0 = 0;
+
+	pr_debug("SMPCMP: CPU%d: %s cpu %d\n", smp_processor_id(),
+		__func__, cpu);
+
+#if 0
+	/* Needed? */
+	flush_icache_range((unsigned long)gp,
+			   (unsigned long)(gp + sizeof(struct thread_info)));
+#endif
+
+	amon_cpu_start(cpu, pc, sp, gp, a0);
+}
+
+/*
+ * Common setup before any secondaries are started
+ */
+void __init cmp_smp_setup(void)
+{
+	int i;
+	int ncpu = 0;
+
+	pr_debug("SMPCMP: CPU%d: %s\n", smp_processor_id(), __func__);
+
+#ifdef CONFIG_MIPS_MT_FPAFF
+	/* If we have an FPU, enroll ourselves in the FPU-full mask */
+	if (cpu_has_fpu)
+		cpu_set(0, mt_fpu_cpumask);
+#endif /* CONFIG_MIPS_MT_FPAFF */
+
+	for (i = 1; i < NR_CPUS; i++) {
+		if (amon_cpu_avail(i)) {
+			cpu_set(i, phys_cpu_present_map);
+			__cpu_number_map[i]	= ++ncpu;
+			__cpu_logical_map[ncpu]	= i;
+		}
+	}
+
+	if (cpu_has_mipsmt) {
+		unsigned int nvpe, mvpconf0 = read_c0_mvpconf0();
+
+		nvpe = ((mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1;
+		smp_num_siblings = nvpe;
+	}
+	pr_info("Detected %i available secondary CPU(s)\n", ncpu);
+}
+
+void __init cmp_prepare_cpus(unsigned int max_cpus)
+{
+	pr_debug("SMPCMP: CPU%d: %s max_cpus=%d\n",
+		 smp_processor_id(), __func__, max_cpus);
+
+	/*
+	 * FIXME: some of these options are per-system, some per-core and
+	 * some per-cpu
+	 */
+	mips_mt_set_cpuoptions();
+}
+
+struct plat_smp_ops cmp_smp_ops = {
+	.send_ipi_single	= cmp_send_ipi_single,
+	.send_ipi_mask		= cmp_send_ipi_mask,
+	.init_secondary		= cmp_init_secondary,
+	.smp_finish		= cmp_smp_finish,
+	.cpus_done		= cmp_cpus_done,
+	.boot_secondary		= cmp_boot_secondary,
+	.smp_setup		= cmp_smp_setup,
+	.prepare_cpus		= cmp_prepare_cpus,
+};

arch/mips/kernel/smp-mt.c

@@ -36,110 +36,7 @@
 #include <asm/mipsmtregs.h>
 #include <asm/mips_mt.h>
 
-#define MIPS_CPU_IPI_RESCHED_IRQ 0
-#define MIPS_CPU_IPI_CALL_IRQ 1
-
-static int cpu_ipi_resched_irq, cpu_ipi_call_irq;
-
-#if 0
-static void dump_mtregisters(int vpe, int tc)
-{
-	printk("vpe %d tc %d\n", vpe, tc);
-
-	settc(tc);
-
-	printk("  c0 status  0x%lx\n", read_vpe_c0_status());
-	printk("  vpecontrol 0x%lx\n", read_vpe_c0_vpecontrol());
-	printk("  vpeconf0    0x%lx\n", read_vpe_c0_vpeconf0());
-	printk("  tcstatus 0x%lx\n", read_tc_c0_tcstatus());
-	printk("  tcrestart 0x%lx\n", read_tc_c0_tcrestart());
-	printk("  tcbind 0x%lx\n", read_tc_c0_tcbind());
-	printk("  tchalt 0x%lx\n", read_tc_c0_tchalt());
-}
-#endif
-
-void __init sanitize_tlb_entries(void)
-{
-	int i, tlbsiz;
-	unsigned long mvpconf0, ncpu;
-
-	if (!cpu_has_mipsmt)
-		return;
-
-	/* Enable VPC */
-	set_c0_mvpcontrol(MVPCONTROL_VPC);
-
-	back_to_back_c0_hazard();
-
-	/* Disable TLB sharing */
-	clear_c0_mvpcontrol(MVPCONTROL_STLB);
-
-	mvpconf0 = read_c0_mvpconf0();
-
-	printk(KERN_INFO "MVPConf0 0x%lx TLBS %lx PTLBE %ld\n", mvpconf0,
-		   (mvpconf0 & MVPCONF0_TLBS) >> MVPCONF0_TLBS_SHIFT,
-			   (mvpconf0 & MVPCONF0_PTLBE) >> MVPCONF0_PTLBE_SHIFT);
-
-	tlbsiz = (mvpconf0 & MVPCONF0_PTLBE) >> MVPCONF0_PTLBE_SHIFT;
-	ncpu = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
-
-	printk(" tlbsiz %d ncpu %ld\n", tlbsiz, ncpu);
-
-	if (tlbsiz > 0) {
-		/* share them out across the vpe's */
-		tlbsiz /= ncpu;
-
-		printk(KERN_INFO "setting Config1.MMU_size to %d\n", tlbsiz);
-
-		for (i = 0; i < ncpu; i++) {
-			settc(i);
-
-			if (i == 0)
-				write_c0_config1((read_c0_config1() & ~(0x3f << 25)) | (tlbsiz << 25));
-			else
-				write_vpe_c0_config1((read_vpe_c0_config1() & ~(0x3f << 25)) |
-						   (tlbsiz << 25));
-		}
-	}
-
-	clear_c0_mvpcontrol(MVPCONTROL_VPC);
-}
-
-static void ipi_resched_dispatch(void)
-{
-	do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ);
-}
-
-static void ipi_call_dispatch(void)
-{
-	do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ);
-}
-
-static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
-{
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t ipi_call_interrupt(int irq, void *dev_id)
-{
-	smp_call_function_interrupt();
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction irq_resched = {
-	.handler	= ipi_resched_interrupt,
-	.flags		= IRQF_DISABLED|IRQF_PERCPU,
-	.name		= "IPI_resched"
-};
-
-static struct irqaction irq_call = {
-	.handler	= ipi_call_interrupt,
-	.flags		= IRQF_DISABLED|IRQF_PERCPU,
-	.name		= "IPI_call"
-};
-
-static void __init smp_copy_vpe_config(void)
+static void __init smvp_copy_vpe_config(void)
 {
 	write_vpe_c0_status(
 		(read_c0_status() & ~(ST0_IM | ST0_IE | ST0_KSU)) | ST0_CU0);
@@ -156,7 +53,7 @@ static void __init smp_copy_vpe_config(void)
 	write_vpe_c0_count(read_c0_count());
 }
 
-static unsigned int __init smp_vpe_init(unsigned int tc, unsigned int mvpconf0,
+static unsigned int __init smvp_vpe_init(unsigned int tc, unsigned int mvpconf0,
 	unsigned int ncpu)
 {
 	if (tc > ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT))
@@ -182,12 +79,12 @@ static unsigned int __init smp_vpe_init(unsigned int tc, unsigned int mvpconf0,
 	write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE);
 
 	if (tc != 0)
-		smp_copy_vpe_config();
+		smvp_copy_vpe_config();
 
 	return ncpu;
 }
 
-static void __init smp_tc_init(unsigned int tc, unsigned int mvpconf0)
+static void __init smvp_tc_init(unsigned int tc, unsigned int mvpconf0)
 {
 	unsigned long tmp;
 
@@ -254,15 +151,20 @@ static void vsmp_send_ipi_mask(cpumask_t mask, unsigned int action)
 
 static void __cpuinit vsmp_init_secondary(void)
 {
-	/* Enable per-cpu interrupts */
+	extern int gic_present;
 
 	/* This is Malta specific: IPI,performance and timer inetrrupts */
-	write_c0_status((read_c0_status() & ~ST0_IM ) |
-	                (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP6 | STATUSF_IP7));
+	if (gic_present)
+		change_c0_status(ST0_IM, STATUSF_IP3 | STATUSF_IP4 |
+					 STATUSF_IP6 | STATUSF_IP7);
+	else
+		change_c0_status(ST0_IM, STATUSF_IP0 | STATUSF_IP1 |
+					 STATUSF_IP6 | STATUSF_IP7);
 }
 
 static void __cpuinit vsmp_smp_finish(void)
 {
+	/* CDFIXME: remove this? */
 	write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ));
 
 #ifdef CONFIG_MIPS_MT_FPAFF
@@ -323,7 +225,7 @@ static void __cpuinit vsmp_boot_secondary(int cpu, struct task_struct *idle)
 /*
  * Common setup before any secondaries are started
  * Make sure all CPU's are in a sensible state before we boot any of the
- * secondarys
+ * secondaries
  */
 static void __init vsmp_smp_setup(void)
 {
@@ -356,8 +258,8 @@ static void __init vsmp_smp_setup(void)
 	for (tc = 0; tc <= ntc; tc++) {
 		settc(tc);
 
-		smp_tc_init(tc, mvpconf0);
-		ncpu = smp_vpe_init(tc, mvpconf0, ncpu);
+		smvp_tc_init(tc, mvpconf0);
+		ncpu = smvp_vpe_init(tc, mvpconf0, ncpu);
 	}
 
 	/* Release config state */
@@ -371,21 +273,6 @@ static void __init vsmp_smp_setup(void)
 static void __init vsmp_prepare_cpus(unsigned int max_cpus)
 {
 	mips_mt_set_cpuoptions();
-
-	/* set up ipi interrupts */
-	if (cpu_has_vint) {
-		set_vi_handler(MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
-		set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
-	}
-
-	cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ;
-	cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ;
-
-	setup_irq(cpu_ipi_resched_irq, &irq_resched);
-	setup_irq(cpu_ipi_call_irq, &irq_call);
-
-	set_irq_handler(cpu_ipi_resched_irq, handle_percpu_irq);
-	set_irq_handler(cpu_ipi_call_irq, handle_percpu_irq);
 }
 
 struct plat_smp_ops vsmp_smp_ops = {

arch/mips/kernel/smp.c

@@ -35,6 +35,7 @@
 #include <asm/atomic.h>
 #include <asm/cpu.h>
 #include <asm/processor.h>
+#include <asm/r4k-timer.h>
 #include <asm/system.h>
 #include <asm/mmu_context.h>
 #include <asm/time.h>
@@ -125,6 +126,8 @@ asmlinkage __cpuinit void start_secondary(void)
 
 	cpu_set(cpu, cpu_callin_map);
 
+	synchronise_count_slave();
+
 	cpu_idle();
 }
 
@@ -287,6 +290,7 @@ void smp_send_stop(void)
 void __init smp_cpus_done(unsigned int max_cpus)
 {
 	mp_ops->cpus_done();
+	synchronise_count_master();
 }
 
 /* called from main before smp_init() */

arch/mips/kernel/smtc.c

@@ -174,14 +174,6 @@ static int clock_hang_reported[NR_CPUS];
 
 #endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
 
-/* Initialize shared TLB - the should probably migrate to smtc_setup_cpus() */
-
-void __init sanitize_tlb_entries(void)
-{
-	printk("Deprecated sanitize_tlb_entries() invoked\n");
-}
-
-
 /*
  * Configure shared TLB - VPC configuration bit must be set by caller
  */
@@ -339,7 +331,8 @@ static void smtc_tc_setup(int vpe, int tc, int cpu)
 	/* In general, all TCs should have the same cpu_data indications */
 	memcpy(&cpu_data[cpu], &cpu_data[0], sizeof(struct cpuinfo_mips));
 	/* For 34Kf, start with TC/CPU 0 as sole owner of single FPU context */
-	if (cpu_data[0].cputype == CPU_34K)
+	if (cpu_data[0].cputype == CPU_34K ||
+	    cpu_data[0].cputype == CPU_1004K)
 		cpu_data[cpu].options &= ~MIPS_CPU_FPU;
 	cpu_data[cpu].vpe_id = vpe;
 	cpu_data[cpu].tc_id = tc;

arch/mips/kernel/spram.c

+/*
+ * MIPS SPRAM support
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Copyright (C) 2007, 2008 MIPS Technologies, Inc.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+#include <linux/stddef.h>
+
+#include <asm/cpu.h>
+#include <asm/fpu.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+#include <asm/r4kcache.h>
+#include <asm/hazards.h>
+
+/*
+ * These definitions are correct for the 24K/34K/74K SPRAM sample
+ * implementation. The 4KS interpreted the tags differently...
+ */
+#define SPRAM_TAG0_ENABLE	0x00000080
+#define SPRAM_TAG0_PA_MASK	0xfffff000
+#define SPRAM_TAG1_SIZE_MASK	0xfffff000
+
+#define SPRAM_TAG_STRIDE	8
+
+#define ERRCTL_SPRAM		(1 << 28)
+
+/* errctl access */
+#define read_c0_errctl(x) read_c0_ecc(x)
+#define write_c0_errctl(x) write_c0_ecc(x)
+
+/*
+ * Different semantics to the set_c0_* function built by __BUILD_SET_C0
+ */
+static __cpuinit unsigned int bis_c0_errctl(unsigned int set)
+{
+	unsigned int res;
+	res = read_c0_errctl();
+	write_c0_errctl(res | set);
+	return res;
+}
+
+static __cpuinit void ispram_store_tag(unsigned int offset, unsigned int data)
+{
+	unsigned int errctl;
+
+	/* enable SPRAM tag access */
+	errctl = bis_c0_errctl(ERRCTL_SPRAM);
+	ehb();
+
+	write_c0_taglo(data);
+	ehb();
+
+	cache_op(Index_Store_Tag_I, CKSEG0|offset);
+	ehb();
+
+	write_c0_errctl(errctl);
+	ehb();
+}
+
+
+static __cpuinit unsigned int ispram_load_tag(unsigned int offset)
+{
+	unsigned int data;
+	unsigned int errctl;
+
+	/* enable SPRAM tag access */
+	errctl = bis_c0_errctl(ERRCTL_SPRAM);
+	ehb();
+	cache_op(Index_Load_Tag_I, CKSEG0 | offset);
+	ehb();
+	data = read_c0_taglo();
+	ehb();
+	write_c0_errctl(errctl);
+	ehb();
+
+	return data;
+}
+
+static __cpuinit void dspram_store_tag(unsigned int offset, unsigned int data)
+{
+	unsigned int errctl;
+
+	/* enable SPRAM tag access */
+	errctl = bis_c0_errctl(ERRCTL_SPRAM);
+	ehb();
+	write_c0_dtaglo(data);
+	ehb();
+	cache_op(Index_Store_Tag_D, CKSEG0 | offset);
+	ehb();
+	write_c0_errctl(errctl);
+	ehb();
+}
+
+
+static __cpuinit unsigned int dspram_load_tag(unsigned int offset)
+{
+	unsigned int data;
+	unsigned int errctl;
+
+	errctl = bis_c0_errctl(ERRCTL_SPRAM);
+	ehb();
+	cache_op(Index_Load_Tag_D, CKSEG0 | offset);
+	ehb();
+	data = read_c0_dtaglo();
+	ehb();
+	write_c0_errctl(errctl);
+	ehb();
+
+	return data;
+}
+
+static __cpuinit void probe_spram(char *type,
+	    unsigned int base,
+	    unsigned int (*read)(unsigned int),
+	    void (*write)(unsigned int, unsigned int))
+{
+	unsigned int firstsize = 0, lastsize = 0;
+	unsigned int firstpa = 0, lastpa = 0, pa = 0;
+	unsigned int offset = 0;
+	unsigned int size, tag0, tag1;
+	unsigned int enabled;
+	int i;
+
+	/*
+	 * The limit is arbitrary but avoids the loop running away if
+	 * the SPRAM tags are implemented differently
+	 */
+
+	for (i = 0; i < 8; i++) {
+		tag0 = read(offset);
+		tag1 = read(offset+SPRAM_TAG_STRIDE);
+		pr_debug("DBG %s%d: tag0=%08x tag1=%08x\n",
+			 type, i, tag0, tag1);
+
+		size = tag1 & SPRAM_TAG1_SIZE_MASK;
+
+		if (size == 0)
+			break;
+
+		if (i != 0) {
+			/* tags may repeat... */
+			if ((pa == firstpa && size == firstsize) ||
+			    (pa == lastpa && size == lastsize))
+				break;
+		}
+
+		/* Align base with size */
+		base = (base + size - 1) & ~(size-1);
+
+		/* reprogram the base address base address and enable */
+		tag0 = (base & SPRAM_TAG0_PA_MASK) | SPRAM_TAG0_ENABLE;
+		write(offset, tag0);
+
+		base += size;
+
+		/* reread the tag */
+		tag0 = read(offset);
+		pa = tag0 & SPRAM_TAG0_PA_MASK;
+		enabled = tag0 & SPRAM_TAG0_ENABLE;
+
+		if (i == 0) {
+			firstpa = pa;
+			firstsize = size;
+		}
+
+		lastpa = pa;
+		lastsize = size;
+
+		if (strcmp(type, "DSPRAM") == 0) {
+			unsigned int *vp = (unsigned int *)(CKSEG1 | pa);
+			unsigned int v;
+#define TDAT	0x5a5aa5a5
+			vp[0] = TDAT;
+			vp[1] = ~TDAT;
+
+			mb();
+
+			v = vp[0];
+			if (v != TDAT)
+				printk(KERN_ERR "vp=%p wrote=%08x got=%08x\n",
+				       vp, TDAT, v);
+			v = vp[1];
+			if (v != ~TDAT)
+				printk(KERN_ERR "vp=%p wrote=%08x got=%08x\n",
+				       vp+1, ~TDAT, v);
+		}
+
+		pr_info("%s%d: PA=%08x,Size=%08x%s\n",
+			type, i, pa, size, enabled ? ",enabled" : "");
+		offset += 2 * SPRAM_TAG_STRIDE;
+	}
+}
+
+__cpuinit void spram_config(void)
+{
+	struct cpuinfo_mips *c = &current_cpu_data;
+	unsigned int config0;
+
+	switch (c->cputype) {
+	case CPU_24K:
+	case CPU_34K:
+	case CPU_74K:
+		config0 = read_c0_config();
+		/* FIXME: addresses are Malta specific */
+		if (config0 & (1<<24)) {
+			probe_spram("ISPRAM", 0x1c000000,
+				    &ispram_load_tag, &ispram_store_tag);
+		}
+		if (config0 & (1<<23))
+			probe_spram("DSPRAM", 0x1c100000,
+				    &dspram_load_tag, &dspram_store_tag);
+	}
+}

arch/mips/kernel/sync-r4k.c

+/*
+ * Count register synchronisation.
+ *
+ * All CPUs will have their count registers synchronised to the CPU0 expirelo
+ * value. This can cause a small timewarp for CPU0. All other CPU's should
+ * not have done anything significant (but they may have had interrupts
+ * enabled briefly - prom_smp_finish() should not be responsible for enabling
+ * interrupts...)
+ *
+ * FIXME: broken for SMTC
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irqflags.h>
+#include <linux/r4k-timer.h>
+
+#include <asm/atomic.h>
+#include <asm/barrier.h>
+#include <asm/cpumask.h>
+#include <asm/mipsregs.h>
+
+static atomic_t __initdata count_start_flag = ATOMIC_INIT(0);
+static atomic_t __initdata count_count_start = ATOMIC_INIT(0);
+static atomic_t __initdata count_count_stop = ATOMIC_INIT(0);
+
+#define COUNTON	100
+#define NR_LOOPS 5
+
+void __init synchronise_count_master(void)
+{
+	int i;
+	unsigned long flags;
+	unsigned int initcount;
+	int nslaves;
+
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * SMTC needs to synchronise per VPE, not per CPU
+	 * ignore for now
+	 */
+	return;
+#endif
+
+	pr_info("Checking COUNT synchronization across %u CPUs: ",
+		num_online_cpus());
+
+	local_irq_save(flags);
+
+	/*
+	 * Notify the slaves that it's time to start
+	 */
+	atomic_set(&count_start_flag, 1);
+	smp_wmb();
+
+	/* Count will be initialised to expirelo for all CPU's */
+	initcount = expirelo;
+
+	/*
+	 * We loop a few times to get a primed instruction cache,
+	 * then the last pass is more or less synchronised and
+	 * the master and slaves each set their cycle counters to a known
+	 * value all at once. This reduces the chance of having random offsets
+	 * between the processors, and guarantees that the maximum
+	 * delay between the cycle counters is never bigger than
+	 * the latency of information-passing (cachelines) between
+	 * two CPUs.
+	 */
+
+	nslaves = num_online_cpus()-1;
+	for (i = 0; i < NR_LOOPS; i++) {
+		/* slaves loop on '!= ncpus' */
+		while (atomic_read(&count_count_start) != nslaves)
+			mb();
+		atomic_set(&count_count_stop, 0);
+		smp_wmb();
+
+		/* this lets the slaves write their count register */
+		atomic_inc(&count_count_start);
+
+		/*
+		 * Everyone initialises count in the last loop:
+		 */
+		if (i == NR_LOOPS-1)
+			write_c0_count(initcount);
+
+		/*
+		 * Wait for all slaves to leave the synchronization point:
+		 */
+		while (atomic_read(&count_count_stop) != nslaves)
+			mb();
+		atomic_set(&count_count_start, 0);
+		smp_wmb();
+		atomic_inc(&count_count_stop);
+	}
+	/* Arrange for an interrupt in a short while */
+	write_c0_compare(read_c0_count() + COUNTON);
+
+	local_irq_restore(flags);
+
+	/*
+	 * i386 code reported the skew here, but the
+	 * count registers were almost certainly out of sync
+	 * so no point in alarming people
+	 */
+	printk("done.\n");
+}
+
+void __init synchronise_count_slave(void)
+{
+	int i;
+	unsigned long flags;
+	unsigned int initcount;
+	int ncpus;
+
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * SMTC needs to synchronise per VPE, not per CPU
+	 * ignore for now
+	 */
+	return;
+#endif
+
+	local_irq_save(flags);
+
+	/*
+	 * Not every cpu is online at the time this gets called,
+	 * so we first wait for the master to say everyone is ready
+	 */
+
+	while (!atomic_read(&count_start_flag))
+		mb();
+
+	/* Count will be initialised to expirelo for all CPU's */
+	initcount = expirelo;
+
+	ncpus = num_online_cpus();
+	for (i = 0; i < NR_LOOPS; i++) {
+		atomic_inc(&count_count_start);
+		while (atomic_read(&count_count_start) != ncpus)
+			mb();
+
+		/*
+		 * Everyone initialises count in the last loop:
+		 */
+		if (i == NR_LOOPS-1)
+			write_c0_count(initcount);
+
+		atomic_inc(&count_count_stop);
+		while (atomic_read(&count_count_stop) != ncpus)
+			mb();
+	}
+	/* Arrange for an interrupt in a short while */
+	write_c0_compare(read_c0_count() + COUNTON);
+
+	local_irq_restore(flags);
+}
+#undef NR_LOOPS
+#endif

arch/mips/kernel/time.c

@@ -38,7 +38,6 @@ int __weak rtc_mips_set_time(unsigned long sec)
 {
 	return 0;
 }
-EXPORT_SYMBOL(rtc_mips_set_time);
 
 int __weak rtc_mips_set_mmss(unsigned long nowtime)
 {
@@ -50,13 +49,11 @@ int update_persistent_clock(struct timespec now)
 	return rtc_mips_set_mmss(now.tv_sec);
 }
 
-int null_perf_irq(void)
+static int null_perf_irq(void)
 {
 	return 0;
 }
 
-EXPORT_SYMBOL(null_perf_irq);
-
 int (*perf_irq)(void) = null_perf_irq;
 
 EXPORT_SYMBOL(perf_irq);

arch/mips/kernel/traps.c

@@ -22,6 +22,7 @@
 #include <linux/kallsyms.h>
 #include <linux/bootmem.h>
 #include <linux/interrupt.h>
+#include <linux/ptrace.h>
 
 #include <asm/bootinfo.h>
 #include <asm/branch.h>
@@ -80,19 +81,22 @@ void (*board_bind_eic_interrupt)(int irq, int regset);
 
 static void show_raw_backtrace(unsigned long reg29)
 {
-	unsigned long *sp = (unsigned long *)reg29;
+	unsigned long *sp = (unsigned long *)(reg29 & ~3);
 	unsigned long addr;
 
 	printk("Call Trace:");
 #ifdef CONFIG_KALLSYMS
 	printk("\n");
 #endif
-	while (!kstack_end(sp)) {
-		addr = *sp++;
-		if (__kernel_text_address(addr))
-			print_ip_sym(addr);
+#define IS_KVA01(a) ((((unsigned int)a) & 0xc0000000) == 0x80000000)
+	if (IS_KVA01(sp)) {
+		while (!kstack_end(sp)) {
+			addr = *sp++;
+			if (__kernel_text_address(addr))
+				print_ip_sym(addr);
+		}
+		printk("\n");
 	}
-	printk("\n");
 }
 
 #ifdef CONFIG_KALLSYMS
@@ -192,16 +196,19 @@ EXPORT_SYMBOL(dump_stack);
 static void show_code(unsigned int __user *pc)
 {
 	long i;
+	unsigned short __user *pc16 = NULL;
 
 	printk("\nCode:");
 
+	if ((unsigned long)pc & 1)
+		pc16 = (unsigned short __user *)((unsigned long)pc & ~1);
 	for(i = -3 ; i < 6 ; i++) {
 		unsigned int insn;
-		if (__get_user(insn, pc + i)) {
+		if (pc16 ? __get_user(insn, pc16 + i) : __get_user(insn, pc + i)) {
 			printk(" (Bad address in epc)\n");
 			break;
 		}
-		printk("%c%08x%c", (i?' ':'<'), insn, (i?' ':'>'));
+		printk("%c%0*x%c", (i?' ':'<'), pc16 ? 4 : 8, insn, (i?' ':'>'));
 	}
 }
 
@@ -311,10 +318,21 @@ void show_regs(struct pt_regs *regs)
 
 void show_registers(const struct pt_regs *regs)
 {
+	const int field = 2 * sizeof(unsigned long);
+
 	__show_regs(regs);
 	print_modules();
-	printk("Process %s (pid: %d, threadinfo=%p, task=%p)\n",
-	        current->comm, task_pid_nr(current), current_thread_info(), current);
+	printk("Process %s (pid: %d, threadinfo=%p, task=%p, tls=%0*lx)\n",
+	       current->comm, current->pid, current_thread_info(), current,
+	      field, current_thread_info()->tp_value);
+	if (cpu_has_userlocal) {
+		unsigned long tls;
+
+		tls = read_c0_userlocal();
+		if (tls != current_thread_info()->tp_value)
+			printk("*HwTLS: %0*lx\n", field, tls);
+	}
+
 	show_stacktrace(current, regs);
 	show_code((unsigned int __user *) regs->cp0_epc);
 	printk("\n");
@@ -657,35 +675,24 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 	force_sig_info(SIGFPE, &info, current);
 }
 
-asmlinkage void do_bp(struct pt_regs *regs)
+static void do_trap_or_bp(struct pt_regs *regs, unsigned int code,
+	const char *str)
 {
-	unsigned int opcode, bcode;
 	siginfo_t info;
-
-	if (__get_user(opcode, (unsigned int __user *) exception_epc(regs)))
-		goto out_sigsegv;
-
-	/*
-	 * There is the ancient bug in the MIPS assemblers that the break
-	 * code starts left to bit 16 instead to bit 6 in the opcode.
-	 * Gas is bug-compatible, but not always, grrr...
-	 * We handle both cases with a simple heuristics.  --macro
-	 */
-	bcode = ((opcode >> 6) & ((1 << 20) - 1));
-	if (bcode < (1 << 10))
-		bcode <<= 10;
+	char b[40];
 
 	/*
-	 * (A short test says that IRIX 5.3 sends SIGTRAP for all break
-	 * insns, even for break codes that indicate arithmetic failures.
-	 * Weird ...)
+	 * A short test says that IRIX 5.3 sends SIGTRAP for all trap
+	 * insns, even for trap and break codes that indicate arithmetic
+	 * failures.  Weird ...
 	 * But should we continue the brokenness???  --macro
 	 */
-	switch (bcode) {
-	case BRK_OVERFLOW << 10:
-	case BRK_DIVZERO << 10:
-		die_if_kernel("Break instruction in kernel code", regs);
-		if (bcode == (BRK_DIVZERO << 10))
+	switch (code) {
+	case BRK_OVERFLOW:
+	case BRK_DIVZERO:
+		scnprintf(b, sizeof(b), "%s instruction in kernel code", str);
+		die_if_kernel(b, regs);
+		if (code == BRK_DIVZERO)
 			info.si_code = FPE_INTDIV;
 		else
 			info.si_code = FPE_INTOVF;
@@ -695,12 +702,34 @@ asmlinkage void do_bp(struct pt_regs *regs)
 		force_sig_info(SIGFPE, &info, current);
 		break;
 	case BRK_BUG:
-		die("Kernel bug detected", regs);
+		die_if_kernel("Kernel bug detected", regs);
+		force_sig(SIGTRAP, current);
 		break;
 	default:
-		die_if_kernel("Break instruction in kernel code", regs);
+		scnprintf(b, sizeof(b), "%s instruction in kernel code", str);
+		die_if_kernel(b, regs);
 		force_sig(SIGTRAP, current);
 	}
+}
+
+asmlinkage void do_bp(struct pt_regs *regs)
+{
+	unsigned int opcode, bcode;
+
+	if (__get_user(opcode, (unsigned int __user *) exception_epc(regs)))
+		goto out_sigsegv;
+
+	/*
+	 * There is the ancient bug in the MIPS assemblers that the break
+	 * code starts left to bit 16 instead to bit 6 in the opcode.
+	 * Gas is bug-compatible, but not always, grrr...
+	 * We handle both cases with a simple heuristics.  --macro
+	 */
+	bcode = ((opcode >> 6) & ((1 << 20) - 1));
+	if (bcode >= (1 << 10))
+		bcode >>= 10;
+
+	do_trap_or_bp(regs, bcode, "Break");
 	return;
 
 out_sigsegv:
@@ -710,7 +739,6 @@ asmlinkage void do_bp(struct pt_regs *regs)
 asmlinkage void do_tr(struct pt_regs *regs)
 {
 	unsigned int opcode, tcode = 0;
-	siginfo_t info;
 
 	if (__get_user(opcode, (unsigned int __user *) exception_epc(regs)))
 		goto out_sigsegv;
@@ -719,32 +747,7 @@ asmlinkage void do_tr(struct pt_regs *regs)
 	if (!(opcode & OPCODE))
 		tcode = ((opcode >> 6) & ((1 << 10) - 1));
 
-	/*
-	 * (A short test says that IRIX 5.3 sends SIGTRAP for all trap
-	 * insns, even for trap codes that indicate arithmetic failures.
-	 * Weird ...)
-	 * But should we continue the brokenness???  --macro
-	 */
-	switch (tcode) {
-	case BRK_OVERFLOW:
-	case BRK_DIVZERO:
-		die_if_kernel("Trap instruction in kernel code", regs);
-		if (tcode == BRK_DIVZERO)
-			info.si_code = FPE_INTDIV;
-		else
-			info.si_code = FPE_INTOVF;
-		info.si_signo = SIGFPE;
-		info.si_errno = 0;
-		info.si_addr = (void __user *) regs->cp0_epc;
-		force_sig_info(SIGFPE, &info, current);
-		break;
-	case BRK_BUG:
-		die("Kernel bug detected", regs);
-		break;
-	default:
-		die_if_kernel("Trap instruction in kernel code", regs);
-		force_sig(SIGTRAP, current);
-	}
+	do_trap_or_bp(regs, tcode, "Trap");
 	return;
 
 out_sigsegv:
@@ -985,6 +988,21 @@ asmlinkage void do_reserved(struct pt_regs *regs)
 	      (regs->cp0_cause & 0x7f) >> 2);
 }
 
+static int __initdata l1parity = 1;
+static int __init nol1parity(char *s)
+{
+	l1parity = 0;
+	return 1;
+}
+__setup("nol1par", nol1parity);
+static int __initdata l2parity = 1;
+static int __init nol2parity(char *s)
+{
+	l2parity = 0;
+	return 1;
+}
+__setup("nol2par", nol2parity);
+
 /*
  * Some MIPS CPUs can enable/disable for cache parity detection, but do
  * it different ways.
@@ -994,6 +1012,62 @@ static inline void parity_protection_init(void)
 	switch (current_cpu_type()) {
 	case CPU_24K:
 	case CPU_34K:
+	case CPU_74K:
+	case CPU_1004K:
+		{
+#define ERRCTL_PE	0x80000000
+#define ERRCTL_L2P	0x00800000
+			unsigned long errctl;
+			unsigned int l1parity_present, l2parity_present;
+
+			errctl = read_c0_ecc();
+			errctl &= ~(ERRCTL_PE|ERRCTL_L2P);
+
+			/* probe L1 parity support */
+			write_c0_ecc(errctl | ERRCTL_PE);
+			back_to_back_c0_hazard();
+			l1parity_present = (read_c0_ecc() & ERRCTL_PE);
+
+			/* probe L2 parity support */
+			write_c0_ecc(errctl|ERRCTL_L2P);
+			back_to_back_c0_hazard();
+			l2parity_present = (read_c0_ecc() & ERRCTL_L2P);
+
+			if (l1parity_present && l2parity_present) {
+				if (l1parity)
+					errctl |= ERRCTL_PE;
+				if (l1parity ^ l2parity)
+					errctl |= ERRCTL_L2P;
+			} else if (l1parity_present) {
+				if (l1parity)
+					errctl |= ERRCTL_PE;
+			} else if (l2parity_present) {
+				if (l2parity)
+					errctl |= ERRCTL_L2P;
+			} else {
+				/* No parity available */
+			}
+
+			printk(KERN_INFO "Writing ErrCtl register=%08lx\n", errctl);
+
+			write_c0_ecc(errctl);
+			back_to_back_c0_hazard();
+			errctl = read_c0_ecc();
+			printk(KERN_INFO "Readback ErrCtl register=%08lx\n", errctl);
+
+			if (l1parity_present)
+				printk(KERN_INFO "Cache parity protection %sabled\n",
+				       (errctl & ERRCTL_PE) ? "en" : "dis");
+
+			if (l2parity_present) {
+				if (l1parity_present && l1parity)
+					errctl ^= ERRCTL_L2P;
+				printk(KERN_INFO "L2 cache parity protection %sabled\n",
+				       (errctl & ERRCTL_L2P) ? "en" : "dis");
+			}
+		}
+		break;
+
 	case CPU_5KC:
 		write_c0_ecc(0x80000000);
 		back_to_back_c0_hazard();
@@ -1306,6 +1380,17 @@ int cp0_compare_irq;
 int cp0_perfcount_irq;
 EXPORT_SYMBOL_GPL(cp0_perfcount_irq);
 
+static int __cpuinitdata noulri;
+
+static int __init ulri_disable(char *s)
+{
+	pr_info("Disabling ulri\n");
+	noulri = 1;
+
+	return 1;
+}
+__setup("noulri", ulri_disable);
+
 void __cpuinit per_cpu_trap_init(void)
 {
 	unsigned int cpu = smp_processor_id();
@@ -1342,16 +1427,14 @@ void __cpuinit per_cpu_trap_init(void)
 	change_c0_status(ST0_CU|ST0_MX|ST0_RE|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX,
 			 status_set);
 
-#ifdef CONFIG_CPU_MIPSR2
 	if (cpu_has_mips_r2) {
 		unsigned int enable = 0x0000000f;
 
-		if (cpu_has_userlocal)
+		if (!noulri && cpu_has_userlocal)
 			enable |= (1 << 29);
 
 		write_c0_hwrena(enable);
 	}
-#endif
 
 #ifdef CONFIG_MIPS_MT_SMTC
 	if (!secondaryTC) {

arch/mips/math-emu/ieee754dp.h

@@ -46,7 +46,7 @@
 #define DPDNORMX	DPDNORMx(xm, xe)
 #define DPDNORMY	DPDNORMx(ym, ye)
 
-static __inline ieee754dp builddp(int s, int bx, u64 m)
+static inline ieee754dp builddp(int s, int bx, u64 m)
 {
 	ieee754dp r;
 

arch/mips/math-emu/ieee754sp.h

@@ -51,7 +51,7 @@
 #define SPDNORMX	SPDNORMx(xm, xe)
 #define SPDNORMY	SPDNORMx(ym, ye)
 
-static __inline ieee754sp buildsp(int s, int bx, unsigned m)
+static inline ieee754sp buildsp(int s, int bx, unsigned m)
 {
 	ieee754sp r;
 

arch/mips/mips-boards/generic/Makefile

@@ -20,6 +20,7 @@
 
 obj-y				:= reset.o display.o init.o memory.o \
 				   cmdline.o time.o
+obj-y				+= amon.o
 
 obj-$(CONFIG_EARLY_PRINTK)	+= console.o
 obj-$(CONFIG_PCI)		+= pci.o

arch/mips/mips-boards/generic/amon.c

+/*
+ * Copyright (C) 2007  MIPS Technologies, Inc.
+ *	All rights reserved.
+
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Arbitrary Monitor interface
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+
+#include <asm-mips/addrspace.h>
+#include <asm-mips/mips-boards/launch.h>
+#include <asm-mips/mipsmtregs.h>
+
+int amon_cpu_avail(int cpu)
+{
+	struct cpulaunch *launch = (struct cpulaunch *)KSEG0ADDR(CPULAUNCH);
+
+	if (cpu < 0 || cpu >= NCPULAUNCH) {
+		pr_debug("avail: cpu%d is out of range\n", cpu);
+		return 0;
+	}
+
+	launch += cpu;
+	if (!(launch->flags & LAUNCH_FREADY)) {
+		pr_debug("avail: cpu%d is not ready\n", cpu);
+		return 0;
+	}
+	if (launch->flags & (LAUNCH_FGO|LAUNCH_FGONE)) {
+		pr_debug("avail: too late.. cpu%d is already gone\n", cpu);
+		return 0;
+	}
+
+	return 1;
+}
+
+void amon_cpu_start(int cpu,
+		    unsigned long pc, unsigned long sp,
+		    unsigned long gp, unsigned long a0)
+{
+	volatile struct cpulaunch *launch =
+		(struct cpulaunch  *)KSEG0ADDR(CPULAUNCH);
+
+	if (!amon_cpu_avail(cpu))
+		return;
+	if (cpu == smp_processor_id()) {
+		pr_debug("launch: I am cpu%d!\n", cpu);
+		return;
+	}
+	launch += cpu;
+
+	pr_debug("launch: starting cpu%d\n", cpu);
+
+	launch->pc = pc;
+	launch->gp = gp;
+	launch->sp = sp;
+	launch->a0 = a0;
+
+	/* Make sure target sees parameters before the go bit */
+	smp_mb();
+
+	launch->flags |= LAUNCH_FGO;
+	while ((launch->flags & LAUNCH_FGONE) == 0)
+		;
+	pr_debug("launch: cpu%d gone!\n", cpu);
+}

arch/mips/mips-boards/generic/init.c

@@ -226,7 +226,7 @@ void __init kgdb_config(void)
 }
 #endif
 
-void __init mips_nmi_setup(void)
+static void __init mips_nmi_setup(void)
 {
 	void *base;
 	extern char except_vec_nmi;
@@ -238,7 +238,7 @@ void __init mips_nmi_setup(void)
 	flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
 }
 
-void __init mips_ejtag_setup(void)
+static void __init mips_ejtag_setup(void)
 {
 	void *base;
 	extern char except_vec_ejtag_debug;
@@ -295,15 +295,21 @@ void __init prom_init(void)
 			break;
 		case MIPS_REVISION_CORID_CORE_MSC:
 		case MIPS_REVISION_CORID_CORE_FPGA2:
-		case MIPS_REVISION_CORID_CORE_FPGA3:
-		case MIPS_REVISION_CORID_CORE_FPGA4:
 		case MIPS_REVISION_CORID_CORE_24K:
-		case MIPS_REVISION_CORID_CORE_EMUL_MSC:
+			/*
+			 * SOCit/ROCit support is essentially identical
+			 * but make an attempt to distinguish them
+			 */
 			mips_revision_sconid = MIPS_REVISION_SCON_SOCIT;
 			break;
+		case MIPS_REVISION_CORID_CORE_FPGA3:
+		case MIPS_REVISION_CORID_CORE_FPGA4:
+		case MIPS_REVISION_CORID_CORE_FPGA5:
+		case MIPS_REVISION_CORID_CORE_EMUL_MSC:
 		default:
-			mips_display_message("CC Error");
-			while (1);   /* We die here... */
+			/* See above */
+			mips_revision_sconid = MIPS_REVISION_SCON_ROCIT;
+			break;
 		}
 	}
 
@@ -418,6 +424,9 @@ void __init prom_init(void)
 #ifdef CONFIG_SERIAL_8250_CONSOLE
 	console_config();
 #endif
+#ifdef CONFIG_MIPS_CMP
+	register_smp_ops(&cmp_smp_ops);
+#endif
 #ifdef CONFIG_MIPS_MT_SMP
 	register_smp_ops(&vsmp_smp_ops);
 #endif

arch/mips/mips-boards/generic/memory.c

@@ -37,7 +37,7 @@ enum yamon_memtypes {
 	yamon_prom,
 	yamon_free,
 };
-struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS];
+static struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS];
 
 #ifdef DEBUG
 static char *mtypes[3] = {
@@ -50,7 +50,7 @@ static char *mtypes[3] = {
 /* determined physical memory size, not overridden by command line args  */
 unsigned long physical_memsize = 0L;
 
-struct prom_pmemblock * __init prom_getmdesc(void)
+static struct prom_pmemblock * __init prom_getmdesc(void)
 {
 	char *memsize_str;
 	unsigned int memsize;

arch/mips/mips-boards/generic/time.c

@@ -55,16 +55,36 @@
 unsigned long cpu_khz;
 
 static int mips_cpu_timer_irq;
+static int mips_cpu_perf_irq;
 extern int cp0_perfcount_irq;
 
+DEFINE_PER_CPU(unsigned int, tickcount);
+#define tickcount_this_cpu __get_cpu_var(tickcount)
+static unsigned long ledbitmask;
+
 static void mips_timer_dispatch(void)
 {
+#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_ATLAS)
+	/*
+	 * Yes, this is very tacky, won't work as expected with SMTC and
+	 * dyntick will break it,
+	 * but it gives me a nice warm feeling during debug
+	 */
+#define LEDBAR 0xbf000408
+	if (tickcount_this_cpu++ >= HZ) {
+		tickcount_this_cpu = 0;
+		change_bit(smp_processor_id(), &ledbitmask);
+		smp_wmb(); /* Make sure every one else sees the change */
+		/* This will pick up any recent changes made by other CPU's */
+		*(unsigned int *)LEDBAR = ledbitmask;
+	}
+#endif
 	do_IRQ(mips_cpu_timer_irq);
 }
 
 static void mips_perf_dispatch(void)
 {
-	do_IRQ(cp0_perfcount_irq);
+	do_IRQ(mips_cpu_perf_irq);
 }
 
 /*
@@ -127,21 +147,20 @@ unsigned long read_persistent_clock(void)
 	return mc146818_get_cmos_time();
 }
 
-void __init plat_perf_setup(void)
+static void __init plat_perf_setup(void)
 {
-	cp0_perfcount_irq = -1;
-
 #ifdef MSC01E_INT_BASE
 	if (cpu_has_veic) {
 		set_vi_handler(MSC01E_INT_PERFCTR, mips_perf_dispatch);
-		cp0_perfcount_irq = MSC01E_INT_BASE + MSC01E_INT_PERFCTR;
+		mips_cpu_perf_irq = MSC01E_INT_BASE + MSC01E_INT_PERFCTR;
 	} else
 #endif
 	if (cp0_perfcount_irq >= 0) {
 		if (cpu_has_vint)
 			set_vi_handler(cp0_perfcount_irq, mips_perf_dispatch);
+		mips_cpu_perf_irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
 #ifdef CONFIG_SMP
-		set_irq_handler(cp0_perfcount_irq, handle_percpu_irq);
+		set_irq_handler(mips_cpu_perf_irq, handle_percpu_irq);
 #endif
 	}
 }

arch/mips/mips-boards/malta/Makefile

@@ -22,6 +22,7 @@
 obj-y := malta_int.o malta_platform.o malta_setup.o
 
 obj-$(CONFIG_MTD) += malta_mtd.o
+# FIXME FIXME FIXME
 obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o
 
 EXTRA_CFLAGS += -Werror

arch/mips/mips-boards/malta/malta_int.c

@@ -31,6 +31,7 @@
 #include <linux/kernel.h>
 #include <linux/random.h>
 
+#include <asm/traps.h>
 #include <asm/i8259.h>
 #include <asm/irq_cpu.h>
 #include <asm/irq_regs.h>
@@ -41,6 +42,14 @@
 #include <asm/mips-boards/generic.h>
 #include <asm/mips-boards/msc01_pci.h>
 #include <asm/msc01_ic.h>
+#include <asm/gic.h>
+#include <asm/gcmpregs.h>
+
+int gcmp_present = -1;
+int gic_present;
+static unsigned long _msc01_biu_base;
+static unsigned long _gcmp_base;
+static unsigned int ipi_map[NR_CPUS];
 
 static DEFINE_SPINLOCK(mips_irq_lock);
 
@@ -121,6 +130,17 @@ static void malta_hw0_irqdispatch(void)
 	do_IRQ(MALTA_INT_BASE + irq);
 }
 
+static void malta_ipi_irqdispatch(void)
+{
+	int irq;
+
+	irq = gic_get_int();
+	if (irq < 0)
+		return;  /* interrupt has already been cleared */
+
+	do_IRQ(MIPS_GIC_IRQ_BASE + irq);
+}
+
 static void corehi_irqdispatch(void)
 {
 	unsigned int intedge, intsteer, pcicmd, pcibadaddr;
@@ -257,12 +277,61 @@ asmlinkage void plat_irq_dispatch(void)
 
 	if (irq == MIPSCPU_INT_I8259A)
 		malta_hw0_irqdispatch();
+	else if (gic_present && ((1 << irq) & ipi_map[smp_processor_id()]))
+		malta_ipi_irqdispatch();
 	else if (irq >= 0)
 		do_IRQ(MIPS_CPU_IRQ_BASE + irq);
 	else
 		spurious_interrupt();
 }
 
+#ifdef CONFIG_MIPS_MT_SMP
+
+
+#define GIC_MIPS_CPU_IPI_RESCHED_IRQ	3
+#define GIC_MIPS_CPU_IPI_CALL_IRQ	4
+
+#define MIPS_CPU_IPI_RESCHED_IRQ 0	/* SW int 0 for resched */
+#define C_RESCHED C_SW0
+#define MIPS_CPU_IPI_CALL_IRQ 1		/* SW int 1 for resched */
+#define C_CALL C_SW1
+static int cpu_ipi_resched_irq, cpu_ipi_call_irq;
+
+static void ipi_resched_dispatch(void)
+{
+	do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ);
+}
+
+static void ipi_call_dispatch(void)
+{
+	do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ);
+}
+
+static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
+{
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ipi_call_interrupt(int irq, void *dev_id)
+{
+	smp_call_function_interrupt();
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction irq_resched = {
+	.handler	= ipi_resched_interrupt,
+	.flags		= IRQF_DISABLED|IRQF_PERCPU,
+	.name		= "IPI_resched"
+};
+
+static struct irqaction irq_call = {
+	.handler	= ipi_call_interrupt,
+	.flags		= IRQF_DISABLED|IRQF_PERCPU,
+	.name		= "IPI_call"
+};
+#endif /* CONFIG_MIPS_MT_SMP */
+
 static struct irqaction i8259irq = {
 	.handler = no_action,
 	.name = "XT-PIC cascade"
@@ -273,13 +342,13 @@ static struct irqaction corehi_irqaction = {
 	.name = "CoreHi"
 };
 
-msc_irqmap_t __initdata msc_irqmap[] = {
+static msc_irqmap_t __initdata msc_irqmap[] = {
 	{MSC01C_INT_TMR,		MSC01_IRQ_EDGE, 0},
 	{MSC01C_INT_PCI,		MSC01_IRQ_LEVEL, 0},
 };
-int __initdata msc_nr_irqs = ARRAY_SIZE(msc_irqmap);
+static int __initdata msc_nr_irqs = ARRAY_SIZE(msc_irqmap);
 
-msc_irqmap_t __initdata msc_eicirqmap[] = {
+static msc_irqmap_t __initdata msc_eicirqmap[] = {
 	{MSC01E_INT_SW0,		MSC01_IRQ_LEVEL, 0},
 	{MSC01E_INT_SW1,		MSC01_IRQ_LEVEL, 0},
 	{MSC01E_INT_I8259A,		MSC01_IRQ_LEVEL, 0},
@@ -291,15 +360,90 @@ msc_irqmap_t __initdata msc_eicirqmap[] = {
 	{MSC01E_INT_PERFCTR,		MSC01_IRQ_LEVEL, 0},
 	{MSC01E_INT_CPUCTR,		MSC01_IRQ_LEVEL, 0}
 };
-int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap);
+
+static int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap);
+
+/*
+ * This GIC specific tabular array defines the association between External
+ * Interrupts and CPUs/Core Interrupts. The nature of the External
+ * Interrupts is also defined here - polarity/trigger.
+ */
+static struct gic_intr_map gic_intr_map[] = {
+	{ GIC_EXT_INTR(0), 	X,	X,		X, 		X,		0 },
+	{ GIC_EXT_INTR(1), 	X,	X,		X, 		X,		0 },
+	{ GIC_EXT_INTR(2), 	X,	X,		X, 		X,		0 },
+	{ GIC_EXT_INTR(3), 	0,	GIC_CPU_INT0,	GIC_POL_POS, 	GIC_TRIG_LEVEL,	0 },
+	{ GIC_EXT_INTR(4), 	0,	GIC_CPU_INT1,	GIC_POL_POS, 	GIC_TRIG_LEVEL,	0 },
+	{ GIC_EXT_INTR(5), 	0,	GIC_CPU_INT2,	GIC_POL_POS, 	GIC_TRIG_LEVEL,	0 },
+	{ GIC_EXT_INTR(6), 	0,	GIC_CPU_INT3,	GIC_POL_POS, 	GIC_TRIG_LEVEL,	0 },
+	{ GIC_EXT_INTR(7), 	0,	GIC_CPU_INT4,	GIC_POL_POS, 	GIC_TRIG_LEVEL,	0 },
+	{ GIC_EXT_INTR(8), 	0,	GIC_CPU_INT3,	GIC_POL_POS, 	GIC_TRIG_LEVEL,	0 },
+	{ GIC_EXT_INTR(9), 	0,	GIC_CPU_INT3,	GIC_POL_POS, 	GIC_TRIG_LEVEL,	0 },
+	{ GIC_EXT_INTR(10), 	X,	X,		X, 		X,		0 },
+	{ GIC_EXT_INTR(11), 	X,	X,		X, 		X,		0 },
+	{ GIC_EXT_INTR(12), 	0,	GIC_CPU_INT3,	GIC_POL_POS, 	GIC_TRIG_LEVEL,	0 },
+	{ GIC_EXT_INTR(13), 	0,	GIC_MAP_TO_NMI_MSK,	GIC_POL_POS, GIC_TRIG_LEVEL,	0 },
+	{ GIC_EXT_INTR(14), 	0,	GIC_MAP_TO_NMI_MSK,	GIC_POL_POS, GIC_TRIG_LEVEL,	0 },
+	{ GIC_EXT_INTR(15), 	X,	X,		X, 		X,		0 },
+	{ GIC_EXT_INTR(16), 	0,	GIC_CPU_INT1,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
+	{ GIC_EXT_INTR(17), 	0,	GIC_CPU_INT2,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
+	{ GIC_EXT_INTR(18), 	1,	GIC_CPU_INT1,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
+	{ GIC_EXT_INTR(19), 	1,	GIC_CPU_INT2,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
+	{ GIC_EXT_INTR(20), 	2,	GIC_CPU_INT1,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
+	{ GIC_EXT_INTR(21), 	2,	GIC_CPU_INT2,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
+	{ GIC_EXT_INTR(22), 	3,	GIC_CPU_INT1,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
+	{ GIC_EXT_INTR(23), 	3,	GIC_CPU_INT2,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
+};
+
+/*
+ * GCMP needs to be detected before any SMP initialisation
+ */
+int __init gcmp_probe(unsigned long addr, unsigned long size)
+{
+	if (gcmp_present >= 0)
+		return gcmp_present;
+
+	_gcmp_base = (unsigned long) ioremap_nocache(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ);
+	_msc01_biu_base = (unsigned long) ioremap_nocache(MSC01_BIU_REG_BASE, MSC01_BIU_ADDRSPACE_SZ);
+	gcmp_present = (GCMPGCB(GCMPB) & GCMP_GCB_GCMPB_GCMPBASE_MSK) == GCMP_BASE_ADDR;
+
+	if (gcmp_present)
+		printk(KERN_DEBUG "GCMP present\n");
+	return gcmp_present;
+}
+
+void __init fill_ipi_map(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(gic_intr_map); i++) {
+		if (gic_intr_map[i].ipiflag && (gic_intr_map[i].cpunum != X))
+			ipi_map[gic_intr_map[i].cpunum] |=
+				(1 << (gic_intr_map[i].pin + 2));
+	}
+}
 
 void __init arch_init_irq(void)
 {
+	int gic_present, gcmp_present;
+
 	init_i8259_irqs();
 
 	if (!cpu_has_veic)
 		mips_cpu_irq_init();
 
+	gcmp_present = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ);
+	if (gcmp_present)  {
+		GCMPGCB(GICBA) = GIC_BASE_ADDR | GCMP_GCB_GICBA_EN_MSK;
+		gic_present = 1;
+	} else {
+		_msc01_biu_base = (unsigned long) ioremap_nocache(MSC01_BIU_REG_BASE, MSC01_BIU_ADDRSPACE_SZ);
+		gic_present = (REG(_msc01_biu_base, MSC01_SC_CFG) &
+		MSC01_SC_CFG_GICPRES_MSK) >> MSC01_SC_CFG_GICPRES_SHF;
+	}
+	if (gic_present)
+		printk(KERN_DEBUG "GIC present\n");
+
 	switch (mips_revision_sconid) {
 	case MIPS_REVISION_SCON_SOCIT:
 	case MIPS_REVISION_SCON_ROCIT:
@@ -360,4 +504,206 @@ void __init arch_init_irq(void)
 		setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI,
 						&corehi_irqaction);
 	}
+
+#if defined(CONFIG_MIPS_MT_SMP)
+	if (gic_present) {
+		/* FIXME */
+		int i;
+		struct {
+			unsigned int resched;
+			unsigned int call;
+		} ipiirq[] = {
+			{
+				.resched = GIC_IPI_EXT_INTR_RESCHED_VPE0,
+				.call =  GIC_IPI_EXT_INTR_CALLFNC_VPE0},
+			{
+				.resched = GIC_IPI_EXT_INTR_RESCHED_VPE1,
+				.call =  GIC_IPI_EXT_INTR_CALLFNC_VPE1
+			}, {
+				.resched = GIC_IPI_EXT_INTR_RESCHED_VPE2,
+				.call =  GIC_IPI_EXT_INTR_CALLFNC_VPE2
+			}, {
+				.resched = GIC_IPI_EXT_INTR_RESCHED_VPE3,
+				.call =  GIC_IPI_EXT_INTR_CALLFNC_VPE3
+			}
+		};
+#define NIPI (sizeof(ipiirq)/sizeof(ipiirq[0]))
+		fill_ipi_map();
+		gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE);
+		if (!gcmp_present) {
+			/* Enable the GIC */
+			i = REG(_msc01_biu_base, MSC01_SC_CFG);
+			REG(_msc01_biu_base, MSC01_SC_CFG) =
+				(i | (0x1 << MSC01_SC_CFG_GICENA_SHF));
+			pr_debug("GIC Enabled\n");
+		}
+
+		/* set up ipi interrupts */
+		if (cpu_has_vint) {
+			set_vi_handler(MIPSCPU_INT_IPI0, malta_ipi_irqdispatch);
+			set_vi_handler(MIPSCPU_INT_IPI1, malta_ipi_irqdispatch);
+		}
+		/* Argh.. this really needs sorting out.. */
+		printk("CPU%d: status register was %08x\n", smp_processor_id(), read_c0_status());
+		write_c0_status(read_c0_status() | STATUSF_IP3 | STATUSF_IP4);
+		printk("CPU%d: status register now %08x\n", smp_processor_id(), read_c0_status());
+		write_c0_status(0x1100dc00);
+		printk("CPU%d: status register frc %08x\n", smp_processor_id(), read_c0_status());
+		for (i = 0; i < NIPI; i++) {
+			setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, &irq_resched);
+			setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].call, &irq_call);
+
+			set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, handle_percpu_irq);
+			set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].call, handle_percpu_irq);
+		}
+	} else {
+		/* set up ipi interrupts */
+		if (cpu_has_veic) {
+			set_vi_handler (MSC01E_INT_SW0, ipi_resched_dispatch);
+			set_vi_handler (MSC01E_INT_SW1, ipi_call_dispatch);
+			cpu_ipi_resched_irq = MSC01E_INT_SW0;
+			cpu_ipi_call_irq = MSC01E_INT_SW1;
+		} else {
+			if (cpu_has_vint) {
+				set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
+				set_vi_handler (MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
+			}
+			cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ;
+			cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ;
+		}
+
+		setup_irq(cpu_ipi_resched_irq, &irq_resched);
+		setup_irq(cpu_ipi_call_irq, &irq_call);
+
+		set_irq_handler(cpu_ipi_resched_irq, handle_percpu_irq);
+		set_irq_handler(cpu_ipi_call_irq, handle_percpu_irq);
+	}
+#endif
+}
+
+void malta_be_init(void)
+{
+	if (gcmp_present) {
+		/* Could change CM error mask register */
+	}
+}
+
+
+static char *tr[8] = {
+	"mem",	"gcr",	"gic",	"mmio",
+	"0x04",	"0x05",	"0x06",	"0x07"
+};
+
+static char *mcmd[32] = {
+	[0x00] = "0x00",
+	[0x01] = "Legacy Write",
+	[0x02] = "Legacy Read",
+	[0x03] = "0x03",
+	[0x04] = "0x04",
+	[0x05] = "0x05",
+	[0x06] = "0x06",
+	[0x07] = "0x07",
+	[0x08] = "Coherent Read Own",
+	[0x09] = "Coherent Read Share",
+	[0x0a] = "Coherent Read Discard",
+	[0x0b] = "Coherent Ready Share Always",
+	[0x0c] = "Coherent Upgrade",
+	[0x0d] = "Coherent Writeback",
+	[0x0e] = "0x0e",
+	[0x0f] = "0x0f",
+	[0x10] = "Coherent Copyback",
+	[0x11] = "Coherent Copyback Invalidate",
+	[0x12] = "Coherent Invalidate",
+	[0x13] = "Coherent Write Invalidate",
+	[0x14] = "Coherent Completion Sync",
+	[0x15] = "0x15",
+	[0x16] = "0x16",
+	[0x17] = "0x17",
+	[0x18] = "0x18",
+	[0x19] = "0x19",
+	[0x1a] = "0x1a",
+	[0x1b] = "0x1b",
+	[0x1c] = "0x1c",
+	[0x1d] = "0x1d",
+	[0x1e] = "0x1e",
+	[0x1f] = "0x1f"
+};
+
+static char *core[8] = {
+	"Invalid/OK", 	"Invalid/Data",
+	"Shared/OK",	"Shared/Data",
+	"Modified/OK",	"Modified/Data",
+	"Exclusive/OK",	"Exclusive/Data"
+};
+
+static char *causes[32] = {
+	"None", "GC_WR_ERR", "GC_RD_ERR", "COH_WR_ERR",
+	"COH_RD_ERR", "MMIO_WR_ERR", "MMIO_RD_ERR", "0x07",
+	"0x08", "0x09", "0x0a", "0x0b",
+	"0x0c", "0x0d", "0x0e", "0x0f",
+	"0x10", "0x11", "0x12", "0x13",
+	"0x14", "0x15", "0x16", "INTVN_WR_ERR",
+	"INTVN_RD_ERR", "0x19", "0x1a", "0x1b",
+	"0x1c", "0x1d", "0x1e", "0x1f"
+};
+
+int malta_be_handler(struct pt_regs *regs, int is_fixup)
+{
+	/* This duplicates the handling in do_be which seems wrong */
+	int retval = is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL;
+
+	if (gcmp_present) {
+		unsigned long cm_error = GCMPGCB(GCMEC);
+		unsigned long cm_addr = GCMPGCB(GCMEA);
+		unsigned long cm_other = GCMPGCB(GCMEO);
+		unsigned long cause, ocause;
+		char buf[256];
+
+		cause = (cm_error & GCMP_GCB_GMEC_ERROR_TYPE_MSK);
+		if (cause != 0) {
+			cause >>= GCMP_GCB_GMEC_ERROR_TYPE_SHF;
+			if (cause < 16) {
+				unsigned long cca_bits = (cm_error >> 15) & 7;
+				unsigned long tr_bits = (cm_error >> 12) & 7;
+				unsigned long mcmd_bits = (cm_error >> 7) & 0x1f;
+				unsigned long stag_bits = (cm_error >> 3) & 15;
+				unsigned long sport_bits = (cm_error >> 0) & 7;
+
+				snprintf(buf, sizeof(buf),
+					 "CCA=%lu TR=%s MCmd=%s STag=%lu "
+					 "SPort=%lu\n",
+					 cca_bits, tr[tr_bits], mcmd[mcmd_bits],
+					 stag_bits, sport_bits);
+			} else {
+				/* glob state & sresp together */
+				unsigned long c3_bits = (cm_error >> 18) & 7;
+				unsigned long c2_bits = (cm_error >> 15) & 7;
+				unsigned long c1_bits = (cm_error >> 12) & 7;
+				unsigned long c0_bits = (cm_error >> 9) & 7;
+				unsigned long sc_bit = (cm_error >> 8) & 1;
+				unsigned long mcmd_bits = (cm_error >> 3) & 0x1f;
+				unsigned long sport_bits = (cm_error >> 0) & 7;
+				snprintf(buf, sizeof(buf),
+					 "C3=%s C2=%s C1=%s C0=%s SC=%s "
+					 "MCmd=%s SPort=%lu\n",
+					 core[c3_bits], core[c2_bits],
+					 core[c1_bits], core[c0_bits],
+					 sc_bit ? "True" : "False",
+					 mcmd[mcmd_bits], sport_bits);
+			}
+
+			ocause = (cm_other & GCMP_GCB_GMEO_ERROR_2ND_MSK) >>
+				 GCMP_GCB_GMEO_ERROR_2ND_SHF;
+
+			printk("CM_ERROR=%08lx %s <%s>\n", cm_error,
+			       causes[cause], buf);
+			printk("CM_ADDR =%08lx\n", cm_addr);
+			printk("CM_OTHER=%08lx %s\n", cm_other, causes[ocause]);
+
+			/* reprime cause register */
+			GCMPGCB(GCMEC) = 0;
+		}
+	}
+
+	return retval;
 }

arch/mips/mips-boards/malta/malta_setup.c

 /*
  * Carsten Langgaard, carstenl@mips.com
  * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
- * Copyright (C) Dmitri Vorobiev
+ * Copyright (C) 2008 Dmitri Vorobiev
  *
  *  This program is free software; you can distribute it and/or modify it
  *  under the terms of the GNU General Public License (Version 2) as
@@ -36,7 +36,10 @@
 #include <linux/console.h>
 #endif
 
-struct resource standard_io_resources[] = {
+extern void malta_be_init(void);
+extern int malta_be_handler(struct pt_regs *regs, int is_fixup);
+
+static struct resource standard_io_resources[] = {
 	{
 		.name = "dma1",
 		.start = 0x00,
@@ -220,4 +223,7 @@ void __init plat_mem_setup(void)
 	screen_info_setup();
 #endif
 	mips_reboot_setup();
+
+	board_be_init = malta_be_init;
+	board_be_handler = malta_be_handler;
 }

arch/mips/mipssim/sim_setup.c

@@ -39,9 +39,6 @@
 static void __init serial_init(void);
 unsigned int _isbonito = 0;
 
-extern void __init sanitize_tlb_entries(void);
-
-
 const char *get_system_type(void)
 {
 	return "MIPSsim";
@@ -55,9 +52,6 @@ void __init plat_mem_setup(void)
 
 	pr_info("Linux started...\n");
 
-#ifdef CONFIG_MIPS_MT_SMP
-	sanitize_tlb_entries();
-#endif
 }
 
 extern struct plat_smp_ops ssmtc_smp_ops;

arch/mips/mm/Makefile

@@ -4,30 +4,29 @@
 
 obj-y				+= cache.o dma-default.o extable.o fault.o \
 				   init.o pgtable.o tlbex.o tlbex-fault.o \
-				   uasm.o
+				   uasm.o page.o
 
 obj-$(CONFIG_32BIT)		+= ioremap.o pgtable-32.o
 obj-$(CONFIG_64BIT)		+= pgtable-64.o
 obj-$(CONFIG_HIGHMEM)		+= highmem.o
 
-obj-$(CONFIG_CPU_LOONGSON2)	+= c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
-obj-$(CONFIG_CPU_MIPS32)	+= c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
-obj-$(CONFIG_CPU_MIPS64)	+= c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
-obj-$(CONFIG_CPU_NEVADA)	+= c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
-obj-$(CONFIG_CPU_R10000)	+= c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
-obj-$(CONFIG_CPU_R3000)		+= c-r3k.o tlb-r3k.o pg-r4k.o
-obj-$(CONFIG_CPU_R4300)		+= c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
-obj-$(CONFIG_CPU_R4X00)		+= c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
-obj-$(CONFIG_CPU_R5000)		+= c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
-obj-$(CONFIG_CPU_R5432)		+= c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
-obj-$(CONFIG_CPU_R8000)		+= c-r4k.o cex-gen.o pg-r4k.o tlb-r8k.o
-obj-$(CONFIG_CPU_RM7000)	+= c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
-obj-$(CONFIG_CPU_RM9000)	+= c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
-obj-$(CONFIG_CPU_SB1)		+= c-r4k.o cerr-sb1.o cex-sb1.o pg-sb1.o \
-				   tlb-r4k.o
-obj-$(CONFIG_CPU_TX39XX)	+= c-tx39.o pg-r4k.o tlb-r3k.o
-obj-$(CONFIG_CPU_TX49XX)	+= c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
-obj-$(CONFIG_CPU_VR41XX)	+= c-r4k.o cex-gen.o pg-r4k.o tlb-r4k.o
+obj-$(CONFIG_CPU_LOONGSON2)	+= c-r4k.o cex-gen.o tlb-r4k.o
+obj-$(CONFIG_CPU_MIPS32)	+= c-r4k.o cex-gen.o tlb-r4k.o
+obj-$(CONFIG_CPU_MIPS64)	+= c-r4k.o cex-gen.o tlb-r4k.o
+obj-$(CONFIG_CPU_NEVADA)	+= c-r4k.o cex-gen.o tlb-r4k.o
+obj-$(CONFIG_CPU_R10000)	+= c-r4k.o cex-gen.o tlb-r4k.o
+obj-$(CONFIG_CPU_R3000)		+= c-r3k.o tlb-r3k.o
+obj-$(CONFIG_CPU_R4300)		+= c-r4k.o cex-gen.o tlb-r4k.o
+obj-$(CONFIG_CPU_R4X00)		+= c-r4k.o cex-gen.o tlb-r4k.o
+obj-$(CONFIG_CPU_R5000)		+= c-r4k.o cex-gen.o tlb-r4k.o
+obj-$(CONFIG_CPU_R5432)		+= c-r4k.o cex-gen.o tlb-r4k.o
+obj-$(CONFIG_CPU_R8000)		+= c-r4k.o cex-gen.o tlb-r8k.o
+obj-$(CONFIG_CPU_RM7000)	+= c-r4k.o cex-gen.o tlb-r4k.o
+obj-$(CONFIG_CPU_RM9000)	+= c-r4k.o cex-gen.o tlb-r4k.o
+obj-$(CONFIG_CPU_SB1)		+= c-r4k.o cerr-sb1.o cex-sb1.o tlb-r4k.o
+obj-$(CONFIG_CPU_TX39XX)	+= c-tx39.o tlb-r3k.o
+obj-$(CONFIG_CPU_TX49XX)	+= c-r4k.o cex-gen.o tlb-r4k.o
+obj-$(CONFIG_CPU_VR41XX)	+= c-r4k.o cex-gen.o tlb-r4k.o
 
 obj-$(CONFIG_IP22_CPU_SCACHE)	+= sc-ip22.o
 obj-$(CONFIG_R5000_CPU_SCACHE)  += sc-r5k.o

arch/mips/mm/c-r4k.c

@@ -14,6 +14,7 @@
 #include <linux/linkage.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
+#include <linux/module.h>
 #include <linux/bitops.h>
 
 #include <asm/bcache.h>
@@ -53,6 +54,12 @@ static inline void r4k_on_each_cpu(void (*func) (void *info), void *info,
 	preempt_enable();
 }
 
+#if defined(CONFIG_MIPS_CMP)
+#define cpu_has_safe_index_cacheops 0
+#else
+#define cpu_has_safe_index_cacheops 1
+#endif
+
 /*
  * Must die.
  */
@@ -481,6 +488,8 @@ static inline void local_r4k_flush_cache_page(void *args)
 
 	if (cpu_has_dc_aliases || (exec && !cpu_has_ic_fills_f_dc)) {
 		r4k_blast_dcache_page(addr);
+		if (exec && !cpu_icache_snoops_remote_store)
+			r4k_blast_scache_page(addr);
 	}
 	if (exec) {
 		if (vaddr && cpu_has_vtag_icache && mm == current->active_mm) {
@@ -583,7 +592,7 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
 	 * subset property so we have to flush the primary caches
 	 * explicitly
 	 */
-	if (size >= dcache_size) {
+	if (cpu_has_safe_index_cacheops && size >= dcache_size) {
 		r4k_blast_dcache();
 	} else {
 		R4600_HIT_CACHEOP_WAR_IMPL;
@@ -606,7 +615,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
 		return;
 	}
 
-	if (size >= dcache_size) {
+	if (cpu_has_safe_index_cacheops && size >= dcache_size) {
 		r4k_blast_dcache();
 	} else {
 		R4600_HIT_CACHEOP_WAR_IMPL;
@@ -968,6 +977,7 @@ static void __cpuinit probe_pcache(void)
 	case CPU_24K:
 	case CPU_34K:
 	case CPU_74K:
+	case CPU_1004K:
 		if ((read_c0_config7() & (1 << 16))) {
 			/* effectively physically indexed dcache,
 			   thus no virtual aliases. */
@@ -1216,9 +1226,25 @@ void au1x00_fixup_config_od(void)
 	}
 }
 
+static int __cpuinitdata cca = -1;
+
+static int __init cca_setup(char *str)
+{
+	get_option(&str, &cca);
+
+	return 1;
+}
+
+__setup("cca=", cca_setup);
+
 static void __cpuinit coherency_setup(void)
 {
-	change_c0_config(CONF_CM_CMASK, CONF_CM_DEFAULT);
+	if (cca < 0 || cca > 7)
+		cca = read_c0_config() & CONF_CM_CMASK;
+	_page_cachable_default = cca << _CACHE_SHIFT;
+
+	pr_debug("Using cache attribute %d\n", cca);
+	change_c0_config(CONF_CM_CMASK, cca);
 
 	/*
 	 * c0_status.cu=0 specifies that updates by the sc instruction use
@@ -1248,6 +1274,20 @@ static void __cpuinit coherency_setup(void)
 	}
 }
 
+#if defined(CONFIG_DMA_NONCOHERENT)
+
+static int __cpuinitdata coherentio;
+
+static int __init setcoherentio(char *str)
+{
+	coherentio = 1;
+
+	return 1;
+}
+
+__setup("coherentio", setcoherentio);
+#endif
+
 void __cpuinit r4k_cache_init(void)
 {
 	extern void build_clear_page(void);
@@ -1307,14 +1347,22 @@ void __cpuinit r4k_cache_init(void)
 	flush_data_cache_page	= r4k_flush_data_cache_page;
 	flush_icache_range	= r4k_flush_icache_range;
 
-#ifdef CONFIG_DMA_NONCOHERENT
-	_dma_cache_wback_inv	= r4k_dma_cache_wback_inv;
-	_dma_cache_wback	= r4k_dma_cache_wback_inv;
-	_dma_cache_inv		= r4k_dma_cache_inv;
+#if defined(CONFIG_DMA_NONCOHERENT)
+	if (coherentio) {
+		_dma_cache_wback_inv	= (void *)cache_noop;
+		_dma_cache_wback	= (void *)cache_noop;
+		_dma_cache_inv		= (void *)cache_noop;
+	} else {
+		_dma_cache_wback_inv	= r4k_dma_cache_wback_inv;
+		_dma_cache_wback	= r4k_dma_cache_wback_inv;
+		_dma_cache_inv		= r4k_dma_cache_inv;
+	}
 #endif
 
 	build_clear_page();
 	build_copy_page();
+#if !defined(CONFIG_MIPS_CMP)
 	local_r4k___flush_cache_all(NULL);
+#endif
 	coherency_setup();
 }

arch/mips/mm/cache.c

@@ -130,8 +130,28 @@ void __update_cache(struct vm_area_struct *vma, unsigned long address,
 	}
 }
 
-static char cache_panic[] __cpuinitdata =
-	"Yeee, unsupported cache architecture.";
+unsigned long _page_cachable_default;
+EXPORT_SYMBOL_GPL(_page_cachable_default);
+
+static inline void setup_protection_map(void)
+{
+	protection_map[0] = PAGE_NONE;
+	protection_map[1] = PAGE_READONLY;
+	protection_map[2] = PAGE_COPY;
+	protection_map[3] = PAGE_COPY;
+	protection_map[4] = PAGE_READONLY;
+	protection_map[5] = PAGE_READONLY;
+	protection_map[6] = PAGE_COPY;
+	protection_map[7] = PAGE_COPY;
+	protection_map[8] = PAGE_NONE;
+	protection_map[9] = PAGE_READONLY;
+	protection_map[10] = PAGE_SHARED;
+	protection_map[11] = PAGE_SHARED;
+	protection_map[12] = PAGE_READONLY;
+	protection_map[13] = PAGE_READONLY;
+	protection_map[14] = PAGE_SHARED;
+	protection_map[15] = PAGE_SHARED;
+}
 
 void __devinit cpu_cache_init(void)
 {
@@ -139,34 +159,29 @@ void __devinit cpu_cache_init(void)
 		extern void __weak r3k_cache_init(void);
 
 		r3k_cache_init();
-		return;
 	}
 	if (cpu_has_6k_cache) {
 		extern void __weak r6k_cache_init(void);
 
 		r6k_cache_init();
-		return;
 	}
 	if (cpu_has_4k_cache) {
 		extern void __weak r4k_cache_init(void);
 
 		r4k_cache_init();
-		return;
 	}
 	if (cpu_has_8k_cache) {
 		extern void __weak r8k_cache_init(void);
 
 		r8k_cache_init();
-		return;
 	}
 	if (cpu_has_tx39_cache) {
 		extern void __weak tx39_cache_init(void);
 
 		tx39_cache_init();
-		return;
 	}
 
-	panic(cache_panic);
+	setup_protection_map();
 }
 
 int __weak __uncached_access(struct file *file, unsigned long addr)

arch/mips/mm/init.c

@@ -142,7 +142,7 @@ void *kmap_coherent(struct page *page, unsigned long addr)
 #endif
 	vaddr = __fix_to_virt(FIX_CMAP_END - idx);
 	pte = mk_pte(page, PAGE_KERNEL);
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
 	entrylo = pte.pte_high;
 #else
 	entrylo = pte_val(pte) >> 6;
@@ -221,7 +221,7 @@ void copy_user_highpage(struct page *to, struct page *from,
 		copy_page(vto, vfrom);
 		kunmap_atomic(vfrom, KM_USER0);
 	}
-	if (((vma->vm_flags & VM_EXEC) && !cpu_has_ic_fills_f_dc) ||
+	if ((!cpu_has_ic_fills_f_dc) ||
 	    pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
 		flush_data_cache_page((unsigned long)vto);
 	kunmap_atomic(vto, KM_USER1);
@@ -229,8 +229,6 @@ void copy_user_highpage(struct page *to, struct page *from,
 	smp_wmb();
 }
 
-EXPORT_SYMBOL(copy_user_highpage);
-
 void copy_to_user_page(struct vm_area_struct *vma,
 	struct page *page, unsigned long vaddr, void *dst, const void *src,
 	unsigned long len)
@@ -249,8 +247,6 @@ void copy_to_user_page(struct vm_area_struct *vma,
 		flush_cache_page(vma, vaddr, page_to_pfn(page));
 }
 
-EXPORT_SYMBOL(copy_to_user_page);
-
 void copy_from_user_page(struct vm_area_struct *vma,
 	struct page *page, unsigned long vaddr, void *dst, const void *src,
 	unsigned long len)
@@ -267,9 +263,6 @@ void copy_from_user_page(struct vm_area_struct *vma,
 	}
 }
 
-EXPORT_SYMBOL(copy_from_user_page);
-
-
 #ifdef CONFIG_HIGHMEM
 unsigned long highstart_pfn, highend_pfn;
 

arch/mips/mm/page.c

+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 04, 05 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2007  Maciej W. Rozycki
+ * Copyright (C) 2008  Thiemo Seufer
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/proc_fs.h>
+
+#include <asm/bugs.h>
+#include <asm/cacheops.h>
+#include <asm/inst.h>
+#include <asm/io.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/prefetch.h>
+#include <asm/system.h>
+#include <asm/bootinfo.h>
+#include <asm/mipsregs.h>
+#include <asm/mmu_context.h>
+#include <asm/cpu.h>
+#include <asm/war.h>
+
+#ifdef CONFIG_SIBYTE_DMA_PAGEOPS
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_dma.h>
+#endif
+
+#include "uasm.h"
+
+/* Registers used in the assembled routines. */
+#define ZERO 0
+#define AT 2
+#define A0 4
+#define A1 5
+#define A2 6
+#define T0 8
+#define T1 9
+#define T2 10
+#define T3 11
+#define T9 25
+#define RA 31
+
+/* Handle labels (which must be positive integers). */
+enum label_id {
+	label_clear_nopref = 1,
+	label_clear_pref,
+	label_copy_nopref,
+	label_copy_pref_both,
+	label_copy_pref_store,
+};
+
+UASM_L_LA(_clear_nopref)
+UASM_L_LA(_clear_pref)
+UASM_L_LA(_copy_nopref)
+UASM_L_LA(_copy_pref_both)
+UASM_L_LA(_copy_pref_store)
+
+/* We need one branch and therefore one relocation per target label. */
+static struct uasm_label __cpuinitdata labels[5];
+static struct uasm_reloc __cpuinitdata relocs[5];
+
+#define cpu_is_r4600_v1_x()	((read_c0_prid() & 0xfffffff0) == 0x00002010)
+#define cpu_is_r4600_v2_x()	((read_c0_prid() & 0xfffffff0) == 0x00002020)
+
+/*
+ * Maximum sizes:
+ *
+ * R4000 128 bytes S-cache:		0x058 bytes
+ * R4600 v1.7:				0x05c bytes
+ * R4600 v2.0:				0x060 bytes
+ * With prefetching, 16 word strides	0x120 bytes
+ */
+
+static u32 clear_page_array[0x120 / 4];
+
+#ifdef CONFIG_SIBYTE_DMA_PAGEOPS
+void clear_page_cpu(void *page) __attribute__((alias("clear_page_array")));
+#else
+void clear_page(void *page) __attribute__((alias("clear_page_array")));
+#endif
+
+EXPORT_SYMBOL(clear_page);
+
+/*
+ * Maximum sizes:
+ *
+ * R4000 128 bytes S-cache:		0x11c bytes
+ * R4600 v1.7:				0x080 bytes
+ * R4600 v2.0:				0x07c bytes
+ * With prefetching, 16 word strides	0x540 bytes
+ */
+static u32 copy_page_array[0x540 / 4];
+
+#ifdef CONFIG_SIBYTE_DMA_PAGEOPS
+void
+copy_page_cpu(void *to, void *from) __attribute__((alias("copy_page_array")));
+#else
+void copy_page(void *to, void *from) __attribute__((alias("copy_page_array")));
+#endif
+
+EXPORT_SYMBOL(copy_page);
+
+
+static int pref_bias_clear_store __cpuinitdata;
+static int pref_bias_copy_load __cpuinitdata;
+static int pref_bias_copy_store __cpuinitdata;
+
+static u32 pref_src_mode __cpuinitdata;
+static u32 pref_dst_mode __cpuinitdata;
+
+static int clear_word_size __cpuinitdata;
+static int copy_word_size __cpuinitdata;
+
+static int half_clear_loop_size __cpuinitdata;
+static int half_copy_loop_size __cpuinitdata;
+
+static int cache_line_size __cpuinitdata;
+#define cache_line_mask() (cache_line_size - 1)
+
+static inline void __cpuinit
+pg_addiu(u32 **buf, unsigned int reg1, unsigned int reg2, unsigned int off)
+{
+	if (cpu_has_64bit_gp_regs && DADDI_WAR && r4k_daddiu_bug()) {
+		if (off > 0x7fff) {
+			uasm_i_lui(buf, T9, uasm_rel_hi(off));
+			uasm_i_addiu(buf, T9, T9, uasm_rel_lo(off));
+		} else
+			uasm_i_addiu(buf, T9, ZERO, off);
+		uasm_i_daddu(buf, reg1, reg2, T9);
+	} else {
+		if (off > 0x7fff) {
+			uasm_i_lui(buf, T9, uasm_rel_hi(off));
+			uasm_i_addiu(buf, T9, T9, uasm_rel_lo(off));
+			UASM_i_ADDU(buf, reg1, reg2, T9);
+		} else
+			UASM_i_ADDIU(buf, reg1, reg2, off);
+	}
+}
+
+static void __cpuinit set_prefetch_parameters(void)
+{
+	if (cpu_has_64bit_gp_regs || cpu_has_64bit_zero_reg)
+		clear_word_size = 8;
+	else
+		clear_word_size = 4;
+
+	if (cpu_has_64bit_gp_regs)
+		copy_word_size = 8;
+	else
+		copy_word_size = 4;
+
+	/*
+	 * The pref's used here are using "streaming" hints, which cause the
+	 * copied data to be kicked out of the cache sooner.  A page copy often
+	 * ends up copying a lot more data than is commonly used, so this seems
+	 * to make sense in terms of reducing cache pollution, but I've no real
+	 * performance data to back this up.
+	 */
+	if (cpu_has_prefetch) {
+		/*
+		 * XXX: Most prefetch bias values in here are based on
+		 * guesswork.
+		 */
+		cache_line_size = cpu_dcache_line_size();
+		switch (current_cpu_type()) {
+		case CPU_TX49XX:
+			/* TX49 supports only Pref_Load */
+			pref_bias_copy_load = 256;
+			break;
+
+		case CPU_RM9000:
+			/*
+			 * As a workaround for erratum G105 which make the
+			 * PrepareForStore hint unusable we fall back to
+			 * StoreRetained on the RM9000.  Once it is known which
+			 * versions of the RM9000 we'll be able to condition-
+			 * alize this.
+			 */
+
+		case CPU_R10000:
+		case CPU_R12000:
+		case CPU_R14000:
+			/*
+			 * Those values have been experimentally tuned for an
+			 * Origin 200.
+			 */
+			pref_bias_clear_store = 512;
+			pref_bias_copy_load = 256;
+			pref_bias_copy_store = 256;
+			pref_src_mode = Pref_LoadStreamed;
+			pref_dst_mode = Pref_StoreStreamed;
+			break;
+
+		case CPU_SB1:
+		case CPU_SB1A:
+			pref_bias_clear_store = 128;
+			pref_bias_copy_load = 128;
+			pref_bias_copy_store = 128;
+			/*
+			 * SB1 pass1 Pref_LoadStreamed/Pref_StoreStreamed
+			 * hints are broken.
+			 */
+			if (current_cpu_type() == CPU_SB1 &&
+			    (current_cpu_data.processor_id & 0xff) < 0x02) {
+				pref_src_mode = Pref_Load;
+				pref_dst_mode = Pref_Store;
+			} else {
+				pref_src_mode = Pref_LoadStreamed;
+				pref_dst_mode = Pref_StoreStreamed;
+			}
+			break;
+
+		default:
+			pref_bias_clear_store = 128;
+			pref_bias_copy_load = 256;
+			pref_bias_copy_store = 128;
+			pref_src_mode = Pref_LoadStreamed;
+			pref_dst_mode = Pref_PrepareForStore;
+			break;
+		}
+	} else {
+		if (cpu_has_cache_cdex_s)
+			cache_line_size = cpu_scache_line_size();
+		else if (cpu_has_cache_cdex_p)
+			cache_line_size = cpu_dcache_line_size();
+	}
+	/*
+	 * Too much unrolling will overflow the available space in
+	 * clear_space_array / copy_page_array. 8 words sounds generous,
+	 * but a R4000 with 128 byte L2 line length can exceed even that.
+	 */
+	half_clear_loop_size = min(8 * clear_word_size,
+				   max(cache_line_size >> 1,
+				       4 * clear_word_size));
+	half_copy_loop_size = min(8 * copy_word_size,
+				  max(cache_line_size >> 1,
+				      4 * copy_word_size));
+}
+
+static void __cpuinit build_clear_store(u32 **buf, int off)
+{
+	if (cpu_has_64bit_gp_regs || cpu_has_64bit_zero_reg) {
+		uasm_i_sd(buf, ZERO, off, A0);
+	} else {
+		uasm_i_sw(buf, ZERO, off, A0);
+	}
+}
+
+static inline void __cpuinit build_clear_pref(u32 **buf, int off)
+{
+	if (off & cache_line_mask())
+		return;
+
+	if (pref_bias_clear_store) {
+		uasm_i_pref(buf, pref_dst_mode, pref_bias_clear_store + off,
+			    A0);
+	} else if (cpu_has_cache_cdex_s) {
+		uasm_i_cache(buf, Create_Dirty_Excl_SD, off, A0);
+	} else if (cpu_has_cache_cdex_p) {
+		if (R4600_V1_HIT_CACHEOP_WAR && cpu_is_r4600_v1_x()) {
+			uasm_i_nop(buf);
+			uasm_i_nop(buf);
+			uasm_i_nop(buf);
+			uasm_i_nop(buf);
+		}
+
+		if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
+			uasm_i_lw(buf, ZERO, ZERO, AT);
+
+		uasm_i_cache(buf, Create_Dirty_Excl_D, off, A0);
+	}
+}
+
+void __cpuinit build_clear_page(void)
+{
+	int off;
+	u32 *buf = (u32 *)&clear_page_array;
+	struct uasm_label *l = labels;
+	struct uasm_reloc *r = relocs;
+	int i;
+
+	memset(labels, 0, sizeof(labels));
+	memset(relocs, 0, sizeof(relocs));
+
+	set_prefetch_parameters();
+
+	/*
+	 * This algorithm makes the following assumptions:
+	 *   - The prefetch bias is a multiple of 2 words.
+	 *   - The prefetch bias is less than one page.
+	 */
+	BUG_ON(pref_bias_clear_store % (2 * clear_word_size));
+	BUG_ON(PAGE_SIZE < pref_bias_clear_store);
+
+	off = PAGE_SIZE - pref_bias_clear_store;
+	if (off > 0xffff || !pref_bias_clear_store)
+		pg_addiu(&buf, A2, A0, off);
+	else
+		uasm_i_ori(&buf, A2, A0, off);
+
+	if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
+		uasm_i_lui(&buf, AT, 0xa000);
+
+	off = min(8, pref_bias_clear_store / cache_line_size) *
+	      cache_line_size;
+	while (off) {
+		build_clear_pref(&buf, -off);
+		off -= cache_line_size;
+	}
+	uasm_l_clear_pref(&l, buf);
+	do {
+		build_clear_pref(&buf, off);
+		build_clear_store(&buf, off);
+		off += clear_word_size;
+	} while (off < half_clear_loop_size);
+	pg_addiu(&buf, A0, A0, 2 * off);
+	off = -off;
+	do {
+		build_clear_pref(&buf, off);
+		if (off == -clear_word_size)
+			uasm_il_bne(&buf, &r, A0, A2, label_clear_pref);
+		build_clear_store(&buf, off);
+		off += clear_word_size;
+	} while (off < 0);
+
+	if (pref_bias_clear_store) {
+		pg_addiu(&buf, A2, A0, pref_bias_clear_store);
+		uasm_l_clear_nopref(&l, buf);
+		off = 0;
+		do {
+			build_clear_store(&buf, off);
+			off += clear_word_size;
+		} while (off < half_clear_loop_size);
+		pg_addiu(&buf, A0, A0, 2 * off);
+		off = -off;
+		do {
+			if (off == -clear_word_size)
+				uasm_il_bne(&buf, &r, A0, A2,
+					    label_clear_nopref);
+			build_clear_store(&buf, off);
+			off += clear_word_size;
+		} while (off < 0);
+	}
+
+	uasm_i_jr(&buf, RA);
+	uasm_i_nop(&buf);
+
+	BUG_ON(buf > clear_page_array + ARRAY_SIZE(clear_page_array));
+
+	uasm_resolve_relocs(relocs, labels);
+
+	pr_debug("Synthesized clear page handler (%u instructions).\n",
+		 (u32)(buf - clear_page_array));
+
+	pr_debug("\t.set push\n");
+	pr_debug("\t.set noreorder\n");
+	for (i = 0; i < (buf - clear_page_array); i++)
+		pr_debug("\t.word 0x%08x\n", clear_page_array[i]);
+	pr_debug("\t.set pop\n");
+}
+
+static void __cpuinit build_copy_load(u32 **buf, int reg, int off)
+{
+	if (cpu_has_64bit_gp_regs) {
+		uasm_i_ld(buf, reg, off, A1);
+	} else {
+		uasm_i_lw(buf, reg, off, A1);
+	}
+}
+
+static void __cpuinit build_copy_store(u32 **buf, int reg, int off)
+{
+	if (cpu_has_64bit_gp_regs) {
+		uasm_i_sd(buf, reg, off, A0);
+	} else {
+		uasm_i_sw(buf, reg, off, A0);
+	}
+}
+
+static inline void build_copy_load_pref(u32 **buf, int off)
+{
+	if (off & cache_line_mask())
+		return;
+
+	if (pref_bias_copy_load)
+		uasm_i_pref(buf, pref_src_mode, pref_bias_copy_load + off, A1);
+}
+
+static inline void build_copy_store_pref(u32 **buf, int off)
+{
+	if (off & cache_line_mask())
+		return;
+
+	if (pref_bias_copy_store) {
+		uasm_i_pref(buf, pref_dst_mode, pref_bias_copy_store + off,
+			    A0);
+	} else if (cpu_has_cache_cdex_s) {
+		uasm_i_cache(buf, Create_Dirty_Excl_SD, off, A0);
+	} else if (cpu_has_cache_cdex_p) {
+		if (R4600_V1_HIT_CACHEOP_WAR && cpu_is_r4600_v1_x()) {
+			uasm_i_nop(buf);
+			uasm_i_nop(buf);
+			uasm_i_nop(buf);
+			uasm_i_nop(buf);
+		}
+
+		if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
+			uasm_i_lw(buf, ZERO, ZERO, AT);
+
+		uasm_i_cache(buf, Create_Dirty_Excl_D, off, A0);
+	}
+}
+
+void __cpuinit build_copy_page(void)
+{
+	int off;
+	u32 *buf = (u32 *)&copy_page_array;
+	struct uasm_label *l = labels;
+	struct uasm_reloc *r = relocs;
+	int i;
+
+	memset(labels, 0, sizeof(labels));
+	memset(relocs, 0, sizeof(relocs));
+
+	set_prefetch_parameters();
+
+	/*
+	 * This algorithm makes the following assumptions:
+	 *   - All prefetch biases are multiples of 8 words.
+	 *   - The prefetch biases are less than one page.
+	 *   - The store prefetch bias isn't greater than the load
+	 *     prefetch bias.
+	 */
+	BUG_ON(pref_bias_copy_load % (8 * copy_word_size));
+	BUG_ON(pref_bias_copy_store % (8 * copy_word_size));
+	BUG_ON(PAGE_SIZE < pref_bias_copy_load);
+	BUG_ON(pref_bias_copy_store > pref_bias_copy_load);
+
+	off = PAGE_SIZE - pref_bias_copy_load;
+	if (off > 0xffff || !pref_bias_copy_load)
+		pg_addiu(&buf, A2, A0, off);
+	else
+		uasm_i_ori(&buf, A2, A0, off);
+
+	if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
+		uasm_i_lui(&buf, AT, 0xa000);
+
+	off = min(8, pref_bias_copy_load / cache_line_size) * cache_line_size;
+	while (off) {
+		build_copy_load_pref(&buf, -off);
+		off -= cache_line_size;
+	}
+	off = min(8, pref_bias_copy_store / cache_line_size) * cache_line_size;
+	while (off) {
+		build_copy_store_pref(&buf, -off);
+		off -= cache_line_size;
+	}
+	uasm_l_copy_pref_both(&l, buf);
+	do {
+		build_copy_load_pref(&buf, off);
+		build_copy_load(&buf, T0, off);
+		build_copy_load_pref(&buf, off + copy_word_size);
+		build_copy_load(&buf, T1, off + copy_word_size);
+		build_copy_load_pref(&buf, off + 2 * copy_word_size);
+		build_copy_load(&buf, T2, off + 2 * copy_word_size);
+		build_copy_load_pref(&buf, off + 3 * copy_word_size);
+		build_copy_load(&buf, T3, off + 3 * copy_word_size);
+		build_copy_store_pref(&buf, off);
+		build_copy_store(&buf, T0, off);
+		build_copy_store_pref(&buf, off + copy_word_size);
+		build_copy_store(&buf, T1, off + copy_word_size);
+		build_copy_store_pref(&buf, off + 2 * copy_word_size);
+		build_copy_store(&buf, T2, off + 2 * copy_word_size);
+		build_copy_store_pref(&buf, off + 3 * copy_word_size);
+		build_copy_store(&buf, T3, off + 3 * copy_word_size);
+		off += 4 * copy_word_size;
+	} while (off < half_copy_loop_size);
+	pg_addiu(&buf, A1, A1, 2 * off);
+	pg_addiu(&buf, A0, A0, 2 * off);
+	off = -off;
+	do {
+		build_copy_load_pref(&buf, off);
+		build_copy_load(&buf, T0, off);
+		build_copy_load_pref(&buf, off + copy_word_size);
+		build_copy_load(&buf, T1, off + copy_word_size);
+		build_copy_load_pref(&buf, off + 2 * copy_word_size);
+		build_copy_load(&buf, T2, off + 2 * copy_word_size);
+		build_copy_load_pref(&buf, off + 3 * copy_word_size);
+		build_copy_load(&buf, T3, off + 3 * copy_word_size);
+		build_copy_store_pref(&buf, off);
+		build_copy_store(&buf, T0, off);
+		build_copy_store_pref(&buf, off + copy_word_size);
+		build_copy_store(&buf, T1, off + copy_word_size);
+		build_copy_store_pref(&buf, off + 2 * copy_word_size);
+		build_copy_store(&buf, T2, off + 2 * copy_word_size);
+		build_copy_store_pref(&buf, off + 3 * copy_word_size);
+		if (off == -(4 * copy_word_size))
+			uasm_il_bne(&buf, &r, A2, A0, label_copy_pref_both);
+		build_copy_store(&buf, T3, off + 3 * copy_word_size);
+		off += 4 * copy_word_size;
+	} while (off < 0);
+
+	if (pref_bias_copy_load - pref_bias_copy_store) {
+		pg_addiu(&buf, A2, A0,
+			 pref_bias_copy_load - pref_bias_copy_store);
+		uasm_l_copy_pref_store(&l, buf);
+		off = 0;
+		do {
+			build_copy_load(&buf, T0, off);
+			build_copy_load(&buf, T1, off + copy_word_size);
+			build_copy_load(&buf, T2, off + 2 * copy_word_size);
+			build_copy_load(&buf, T3, off + 3 * copy_word_size);
+			build_copy_store_pref(&buf, off);
+			build_copy_store(&buf, T0, off);
+			build_copy_store_pref(&buf, off + copy_word_size);
+			build_copy_store(&buf, T1, off + copy_word_size);
+			build_copy_store_pref(&buf, off + 2 * copy_word_size);
+			build_copy_store(&buf, T2, off + 2 * copy_word_size);
+			build_copy_store_pref(&buf, off + 3 * copy_word_size);
+			build_copy_store(&buf, T3, off + 3 * copy_word_size);
+			off += 4 * copy_word_size;
+		} while (off < half_copy_loop_size);
+		pg_addiu(&buf, A1, A1, 2 * off);
+		pg_addiu(&buf, A0, A0, 2 * off);
+		off = -off;
+		do {
+			build_copy_load(&buf, T0, off);
+			build_copy_load(&buf, T1, off + copy_word_size);
+			build_copy_load(&buf, T2, off + 2 * copy_word_size);
+			build_copy_load(&buf, T3, off + 3 * copy_word_size);
+			build_copy_store_pref(&buf, off);
+			build_copy_store(&buf, T0, off);
+			build_copy_store_pref(&buf, off + copy_word_size);
+			build_copy_store(&buf, T1, off + copy_word_size);
+			build_copy_store_pref(&buf, off + 2 * copy_word_size);
+			build_copy_store(&buf, T2, off + 2 * copy_word_size);
+			build_copy_store_pref(&buf, off + 3 * copy_word_size);
+			if (off == -(4 * copy_word_size))
+				uasm_il_bne(&buf, &r, A2, A0,
+					    label_copy_pref_store);
+			build_copy_store(&buf, T3, off + 3 * copy_word_size);
+			off += 4 * copy_word_size;
+		} while (off < 0);
+	}
+
+	if (pref_bias_copy_store) {
+		pg_addiu(&buf, A2, A0, pref_bias_copy_store);
+		uasm_l_copy_nopref(&l, buf);
+		off = 0;
+		do {
+			build_copy_load(&buf, T0, off);
+			build_copy_load(&buf, T1, off + copy_word_size);
+			build_copy_load(&buf, T2, off + 2 * copy_word_size);
+			build_copy_load(&buf, T3, off + 3 * copy_word_size);
+			build_copy_store(&buf, T0, off);
+			build_copy_store(&buf, T1, off + copy_word_size);
+			build_copy_store(&buf, T2, off + 2 * copy_word_size);
+			build_copy_store(&buf, T3, off + 3 * copy_word_size);
+			off += 4 * copy_word_size;
+		} while (off < half_copy_loop_size);
+		pg_addiu(&buf, A1, A1, 2 * off);
+		pg_addiu(&buf, A0, A0, 2 * off);
+		off = -off;
+		do {
+			build_copy_load(&buf, T0, off);
+			build_copy_load(&buf, T1, off + copy_word_size);
+			build_copy_load(&buf, T2, off + 2 * copy_word_size);
+			build_copy_load(&buf, T3, off + 3 * copy_word_size);
+			build_copy_store(&buf, T0, off);
+			build_copy_store(&buf, T1, off + copy_word_size);
+			build_copy_store(&buf, T2, off + 2 * copy_word_size);
+			if (off == -(4 * copy_word_size))
+				uasm_il_bne(&buf, &r, A2, A0,
+					    label_copy_nopref);
+			build_copy_store(&buf, T3, off + 3 * copy_word_size);
+			off += 4 * copy_word_size;
+		} while (off < 0);
+	}
+
+	uasm_i_jr(&buf, RA);
+	uasm_i_nop(&buf);
+
+	BUG_ON(buf > copy_page_array + ARRAY_SIZE(copy_page_array));
+
+	uasm_resolve_relocs(relocs, labels);
+
+	pr_debug("Synthesized copy page handler (%u instructions).\n",
+		 (u32)(buf - copy_page_array));
+
+	pr_debug("\t.set push\n");
+	pr_debug("\t.set noreorder\n");
+	for (i = 0; i < (buf - copy_page_array); i++)
+		pr_debug("\t.word 0x%08x\n", copy_page_array[i]);
+	pr_debug("\t.set pop\n");
+}
+
+#ifdef CONFIG_SIBYTE_DMA_PAGEOPS
+
+/*
+ * Pad descriptors to cacheline, since each is exclusively owned by a
+ * particular CPU.
+ */
+struct dmadscr {
+	u64 dscr_a;
+	u64 dscr_b;
+	u64 pad_a;
+	u64 pad_b;
+} ____cacheline_aligned_in_smp page_descr[DM_NUM_CHANNELS];
+
+void sb1_dma_init(void)
+{
+	int i;
+
+	for (i = 0; i < DM_NUM_CHANNELS; i++) {
+		const u64 base_val = CPHYSADDR((unsigned long)&page_descr[i]) |
+				     V_DM_DSCR_BASE_RINGSZ(1);
+		void *base_reg = IOADDR(A_DM_REGISTER(i, R_DM_DSCR_BASE));
+
+		__raw_writeq(base_val, base_reg);
+		__raw_writeq(base_val | M_DM_DSCR_BASE_RESET, base_reg);
+		__raw_writeq(base_val | M_DM_DSCR_BASE_ENABL, base_reg);
+	}
+}
+
+void clear_page(void *page)
+{
+	u64 to_phys = CPHYSADDR((unsigned long)page);
+	unsigned int cpu = smp_processor_id();
+
+	/* if the page is not in KSEG0, use old way */
+	if ((long)KSEGX((unsigned long)page) != (long)CKSEG0)
+		return clear_page_cpu(page);
+
+	page_descr[cpu].dscr_a = to_phys | M_DM_DSCRA_ZERO_MEM |
+				 M_DM_DSCRA_L2C_DEST | M_DM_DSCRA_INTERRUPT;
+	page_descr[cpu].dscr_b = V_DM_DSCRB_SRC_LENGTH(PAGE_SIZE);
+	__raw_writeq(1, IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT)));
+
+	/*
+	 * Don't really want to do it this way, but there's no
+	 * reliable way to delay completion detection.
+	 */
+	while (!(__raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG)))
+		 & M_DM_DSCR_BASE_INTERRUPT))
+		;
+	__raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
+}
+
+void copy_page(void *to, void *from)
+{
+	u64 from_phys = CPHYSADDR((unsigned long)from);
+	u64 to_phys = CPHYSADDR((unsigned long)to);
+	unsigned int cpu = smp_processor_id();
+
+	/* if any page is not in KSEG0, use old way */
+	if ((long)KSEGX((unsigned long)to) != (long)CKSEG0
+	    || (long)KSEGX((unsigned long)from) != (long)CKSEG0)
+		return copy_page_cpu(to, from);
+
+	page_descr[cpu].dscr_a = to_phys | M_DM_DSCRA_L2C_DEST |
+				 M_DM_DSCRA_INTERRUPT;
+	page_descr[cpu].dscr_b = from_phys | V_DM_DSCRB_SRC_LENGTH(PAGE_SIZE);
+	__raw_writeq(1, IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT)));
+
+	/*
+	 * Don't really want to do it this way, but there's no
+	 * reliable way to delay completion detection.
+	 */
+	while (!(__raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG)))
+		 & M_DM_DSCR_BASE_INTERRUPT))
+		;
+	__raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));
+}
+
+#endif /* CONFIG_SIBYTE_DMA_PAGEOPS */

arch/mips/mm/pgtable.c

@@ -12,7 +12,6 @@ void show_mem(void)
 
 	printk("Mem-info:\n");
 	show_free_areas();
-	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
 	pfn = max_mapnr;
 	while (pfn-- > 0) {
 		if (!pfn_valid(pfn))

arch/mips/mm/tlb-r4k.c

@@ -299,7 +299,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
 	idx = read_c0_index();
 	ptep = pte_offset_map(pmdp, address);
 
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
 	write_c0_entrylo0(ptep->pte_high);
 	ptep++;
 	write_c0_entrylo1(ptep->pte_high);