mwifiex: Disable adhoc feature based on firmware capability

We will read fw_cap_info filled by firmware to check whether to
skip ADHOC related commands or not. Also, IBSS_COALESCING_STATUS
command has been moved from init path to adhoc network creation
path.
Signed-off-by: NKarthik D A <karthida@marvell.com>
Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/marvell/mwifiex/cfg80211.c

@@ -2143,6 +2143,16 @@ mwifiex_cfg80211_assoc(struct mwifiex_private *priv, size_t ssid_len,
 	ret = mwifiex_set_encode(priv, NULL, NULL, 0, 0, NULL, 1);
 
 	if (mode == NL80211_IFTYPE_ADHOC) {
+		u16 enable = true;
+
+		/* set ibss coalescing_status */
+		ret = mwifiex_send_cmd(
+				priv,
+				HostCmd_CMD_802_11_IBSS_COALESCING_STATUS,
+				HostCmd_ACT_GEN_SET, 0, &enable, true);
+		if (ret)
+			return ret;
+
 		/* "privacy" is set only for ad-hoc mode */
 		if (privacy) {
 			/*

drivers/net/wireless/marvell/mwifiex/fw.h

@@ -219,6 +219,7 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
 #define ISSUPP_TDLS_ENABLED(FwCapInfo) (FwCapInfo & BIT(14))
 #define ISSUPP_DRCS_ENABLED(FwCapInfo) (FwCapInfo & BIT(15))
 #define ISSUPP_SDIO_SPA_ENABLED(FwCapInfo) (FwCapInfo & BIT(16))
+#define ISSUPP_ADHOC_ENABLED(FwCapInfo) (FwCapInfo & BIT(25))
 
 #define MWIFIEX_DEF_HT_CAP	(IEEE80211_HT_CAP_DSSSCCK40 | \
 				 (1 << IEEE80211_HT_CAP_RX_STBC_SHIFT) | \

drivers/net/wireless/marvell/mwifiex/sta_cmd.c

@@ -1902,6 +1902,24 @@ static int mwifiex_cmd_get_wakeup_reason(struct mwifiex_private *priv,
 	return 0;
 }
 
+/* This function check if the command is supported by firmware */
+static int mwifiex_is_cmd_supported(struct mwifiex_private *priv, u16 cmd_no)
+{
+	if (!ISSUPP_ADHOC_ENABLED(priv->adapter->fw_cap_info)) {
+		switch (cmd_no) {
+		case HostCmd_CMD_802_11_IBSS_COALESCING_STATUS:
+		case HostCmd_CMD_802_11_AD_HOC_START:
+		case HostCmd_CMD_802_11_AD_HOC_JOIN:
+		case HostCmd_CMD_802_11_AD_HOC_STOP:
+			return -EOPNOTSUPP;
+		default:
+			break;
+		}
+	}
+
+	return 0;
+}
+
 /*
  * This function prepares the commands before sending them to the firmware.
  *
@@ -1915,6 +1933,13 @@ int mwifiex_sta_prepare_cmd(struct mwifiex_private *priv, uint16_t cmd_no,
 	struct host_cmd_ds_command *cmd_ptr = cmd_buf;
 	int ret = 0;
 
+	if (mwifiex_is_cmd_supported(priv, cmd_no)) {
+		mwifiex_dbg(priv->adapter, ERROR,
+			    "0x%x command not supported by firmware\n",
+			    cmd_no);
+			return -EOPNOTSUPP;
+		}
+
 	/* Prepare command */
 	switch (cmd_no) {
 	case HostCmd_CMD_GET_HW_SPEC:
@@ -2208,7 +2233,6 @@ int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8 first_sta, bool init)
 {
 	struct mwifiex_adapter *adapter = priv->adapter;
 	int ret;
-	u16 enable = true;
 	struct mwifiex_ds_11n_amsdu_aggr_ctrl amsdu_aggr_ctrl;
 	struct mwifiex_ds_auto_ds auto_ds;
 	enum state_11d_t state_11d;
@@ -2321,16 +2345,6 @@ int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8 first_sta, bool init)
 	if (ret)
 		return -1;
 
-	if (priv->bss_type == MWIFIEX_BSS_TYPE_STA) {
-		/* set ibss coalescing_status */
-		ret = mwifiex_send_cmd(
-				priv,
-				HostCmd_CMD_802_11_IBSS_COALESCING_STATUS,
-				HostCmd_ACT_GEN_SET, 0, &enable, true);
-		if (ret)
-			return -1;
-	}
-
 	memset(&amsdu_aggr_ctrl, 0, sizeof(amsdu_aggr_ctrl));
 	amsdu_aggr_ctrl.enable = true;
 	/* Send request to firmware */