提交 e1a23c66 编写于 作者: K Kylene Hall 提交者: Linus Torvalds

[PATCH] tpm: replace odd LPC init function

Realized the tpm_lpc_init function isn't really necessary.  Replaced it
with vendor specific logic to find out the address the BIOS mapped the TPM
to.  This patch removes the tpm_lpc_init function, enums associated with it
and calls to it.  The patch also implements the replacement functionality.
Signed-off-by: NKylene Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
上级 a6df7da8
......@@ -35,25 +35,6 @@ enum tpm_const {
TPM_NUM_MASK_ENTRIES = TPM_NUM_DEVICES / (8 * sizeof(int))
};
/* PCI configuration addresses */
enum tpm_pci_config_addr {
PCI_GEN_PMCON_1 = 0xA0,
PCI_GEN1_DEC = 0xE4,
PCI_LPC_EN = 0xE6,
PCI_GEN2_DEC = 0xEC
};
enum tpm_config {
TPM_LOCK_REG = 0x0D,
TPM_INTERUPT_REG = 0x0A,
TPM_BASE_ADDR_LO = 0x08,
TPM_BASE_ADDR_HI = 0x09,
TPM_UNLOCK_VALUE = 0x55,
TPM_LOCK_VALUE = 0xAA,
TPM_DISABLE_INTERUPT_VALUE = 0x00
};
static LIST_HEAD(tpm_chip_list);
static DEFINE_SPINLOCK(driver_lock);
static int dev_mask[TPM_NUM_MASK_ENTRIES];
......@@ -68,73 +49,6 @@ static void user_reader_timeout(unsigned long ptr)
up(&chip->buffer_mutex);
}
/*
* Initialize the LPC bus and enable the TPM ports
*/
int tpm_lpc_bus_init(struct pci_dev *pci_dev, u16 base)
{
u32 lpcenable, tmp;
int is_lpcm = 0;
switch (pci_dev->vendor) {
case PCI_VENDOR_ID_INTEL:
switch (pci_dev->device) {
case PCI_DEVICE_ID_INTEL_82801CA_12:
case PCI_DEVICE_ID_INTEL_82801DB_12:
is_lpcm = 1;
break;
}
/* init ICH (enable LPC) */
pci_read_config_dword(pci_dev, PCI_GEN1_DEC, &lpcenable);
lpcenable |= 0x20000000;
pci_write_config_dword(pci_dev, PCI_GEN1_DEC, lpcenable);
if (is_lpcm) {
pci_read_config_dword(pci_dev, PCI_GEN1_DEC,
&lpcenable);
if ((lpcenable & 0x20000000) == 0) {
dev_err(&pci_dev->dev,
"cannot enable LPC\n");
return -ENODEV;
}
}
/* initialize TPM registers */
pci_read_config_dword(pci_dev, PCI_GEN2_DEC, &tmp);
if (!is_lpcm)
tmp = (tmp & 0xFFFF0000) | (base & 0xFFF0);
else
tmp =
(tmp & 0xFFFF0000) | (base & 0xFFF0) |
0x00000001;
pci_write_config_dword(pci_dev, PCI_GEN2_DEC, tmp);
if (is_lpcm) {
pci_read_config_dword(pci_dev, PCI_GEN_PMCON_1,
&tmp);
tmp |= 0x00000004; /* enable CLKRUN */
pci_write_config_dword(pci_dev, PCI_GEN_PMCON_1,
tmp);
}
break;
case PCI_VENDOR_ID_AMD:
/* nothing yet */
break;
}
tpm_write_index(TPM_LOCK_REG, TPM_UNLOCK_VALUE);
tpm_write_index(TPM_INTERUPT_REG, TPM_DISABLE_INTERUPT_VALUE);
tpm_write_index(TPM_BASE_ADDR_LO, base);
tpm_write_index(TPM_BASE_ADDR_HI, (base & 0xFF00) >> 8);
tpm_write_index(TPM_LOCK_REG, TPM_LOCK_VALUE);
return 0;
}
EXPORT_SYMBOL_GPL(tpm_lpc_bus_init);
/*
* Internal kernel interface to transmit TPM commands
*/
......@@ -586,10 +500,6 @@ int tpm_pm_resume(struct pci_dev *pci_dev)
if (chip == NULL)
return -ENODEV;
spin_lock(&driver_lock);
tpm_lpc_bus_init(pci_dev, chip->vendor->base);
spin_unlock(&driver_lock);
return 0;
}
......
......@@ -91,8 +91,6 @@ static inline void tpm_write_index(int index, int value)
outb(value & 0xFF, TPM_DATA);
}
extern int tpm_lpc_bus_init(struct pci_dev *, u16);
extern int tpm_register_hardware(struct pci_dev *,
struct tpm_vendor_specific *);
extern int tpm_open(struct inode *, struct file *);
......
......@@ -22,8 +22,9 @@
#include "tpm.h"
/* Atmel definitions */
enum tpm_atmel_addr{
TPM_ATML_BASE = 0x400
enum tpm_atmel_addr {
TPM_ATMEL_BASE_ADDR_LO = 0x08,
TPM_ATMEL_BASE_ADDR_HI = 0x09
};
/* write status bits */
......@@ -148,7 +149,6 @@ static struct tpm_vendor_specific tpm_atmel = {
.req_complete_mask = ATML_STATUS_BUSY | ATML_STATUS_DATA_AVAIL,
.req_complete_val = ATML_STATUS_DATA_AVAIL,
.req_canceled = ATML_STATUS_READY,
.base = TPM_ATML_BASE,
.attr_group = &atmel_attr_grp,
.miscdev = { .fops = &atmel_ops, },
};
......@@ -158,14 +158,16 @@ static int __devinit tpm_atml_init(struct pci_dev *pci_dev,
{
u8 version[4];
int rc = 0;
int lo, hi;
if (pci_enable_device(pci_dev))
return -EIO;
if (tpm_lpc_bus_init(pci_dev, TPM_ATML_BASE)) {
rc = -ENODEV;
goto out_err;
}
lo = tpm_read_index( TPM_ATMEL_BASE_ADDR_LO );
hi = tpm_read_index( TPM_ATMEL_BASE_ADDR_HI );
tpm_atmel.base = (hi<<8)|lo;
dev_dbg( &pci_dev->dev, "Operating with base: 0x%x\n", tpm_atmel.base);
/* verify that it is an Atmel part */
if (tpm_read_index(4) != 'A' || tpm_read_index(5) != 'T'
......
......@@ -22,9 +22,13 @@
#include "tpm.h"
/* National definitions */
enum tpm_nsc_addr {
enum tpm_nsc_addr{
TPM_NSC_BASE = 0x360,
TPM_NSC_IRQ = 0x07
TPM_NSC_IRQ = 0x07,
TPM_NSC_BASE0_HI = 0x60,
TPM_NSC_BASE0_LO = 0x61,
TPM_NSC_BASE1_HI = 0x62,
TPM_NSC_BASE1_LO = 0x63
};
enum tpm_nsc_index {
......@@ -44,7 +48,7 @@ enum tpm_nsc_status_loc {
};
/* status bits */
enum tpm_nsc_status{
enum tpm_nsc_status {
NSC_STATUS_OBF = 0x01, /* output buffer full */
NSC_STATUS_IBF = 0x02, /* input buffer full */
NSC_STATUS_F0 = 0x04, /* F0 */
......@@ -246,7 +250,6 @@ static struct tpm_vendor_specific tpm_nsc = {
.req_complete_mask = NSC_STATUS_OBF,
.req_complete_val = NSC_STATUS_OBF,
.req_canceled = NSC_STATUS_RDY,
.base = TPM_NSC_BASE,
.attr_group = &nsc_attr_grp,
.miscdev = { .fops = &nsc_ops, },
};
......@@ -255,15 +258,16 @@ static int __devinit tpm_nsc_init(struct pci_dev *pci_dev,
const struct pci_device_id *pci_id)
{
int rc = 0;
int lo, hi;
hi = tpm_read_index(TPM_NSC_BASE0_HI);
lo = tpm_read_index(TPM_NSC_BASE0_LO);
tpm_nsc.base = (hi<<8) | lo;
if (pci_enable_device(pci_dev))
return -EIO;
if (tpm_lpc_bus_init(pci_dev, TPM_NSC_BASE)) {
rc = -ENODEV;
goto out_err;
}
/* verify that it is a National part (SID) */
if (tpm_read_index(NSC_SID_INDEX) != 0xEF) {
rc = -ENODEV;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册