Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2015-10-15

This series contains updates to i40e, i40evf and ixgbe.

Emil changes the ixgbe driver to disable LRO by default in favor or GRO.

Mark provides two changes for ixgbe, first fixes a semaphore issue when
a reset never completes, it is necessary to retake the semaphore before
returning.

Jesse fixes up a missing function header comment variable reference.  Then
enables ethtool priv flags to control flow director at runtime.

Neerav changes several i40e error messages to debug only since the
messages were printing when there was no functional issue and were meant
for debug only.

Catherine changes the i40e driver to make only X722 support 100M SGMII,
since it is the only device to actually support it.

Anjali modifies the i40e/i40evf driver to add writeback on ITR offload
support for X722 since the device has a way to work around the
descriptor writeback issue.

Mitch cleans up obsolete code.  Also reduces the i40evf init time by
shortening up the delays in the init task to aid in performance in
load/unload tests and mitigates DMAR errors in VF enable/disable tests.

Shannon modifies i40e to allow flow director sideband when the device
is in MFP mode and only has one partition enabled, since we still have
plenty of interrupts for managing the flow director activity.  Also
cleaned up flow director ATR control in debugfs since the priv flag
has been added to our ethtool interface.  Makes several general code
cleanups of redundant or unnecessary code for i40e.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/intel/i40e/i40e.h

@@ -102,6 +102,7 @@
 /* Ethtool Private Flags */
 #define I40E_PRIV_FLAGS_NPAR_FLAG	BIT(0)
 #define I40E_PRIV_FLAGS_LINKPOLL_FLAG	BIT(1)
+#define I40E_PRIV_FLAGS_FD_ATR		BIT(2)
 
 #define I40E_NVM_VERSION_LO_SHIFT  0
 #define I40E_NVM_VERSION_LO_MASK   (0xff << I40E_NVM_VERSION_LO_SHIFT)
@@ -332,6 +333,7 @@ struct i40e_pf {
 #define I40E_FLAG_MULTIPLE_TCP_UDP_RSS_PCTYPE	BIT_ULL(38)
 #define I40E_FLAG_LINK_POLLING_ENABLED		BIT_ULL(39)
 #define I40E_FLAG_VEB_MODE_ENABLED		BIT_ULL(40)
+#define I40E_FLAG_NO_PCI_LINK_CHECK		BIT_ULL(42)
 
 	/* tracks features that get auto disabled by errors */
 	u64 auto_disable_flags;

drivers/net/ethernet/intel/i40e/i40e_common.c

@@ -1617,6 +1617,9 @@ i40e_status i40e_aq_get_phy_capabilities(struct i40e_hw *hw,
 	if (hw->aq.asq_last_status == I40E_AQ_RC_EIO)
 		status = I40E_ERR_UNKNOWN_PHY;
 
+	if (report_init)
+		hw->phy.phy_types = le32_to_cpu(abilities->phy_type);
+
 	return status;
 }
 

drivers/net/ethernet/intel/i40e/i40e_dcb_nl.c

@@ -240,10 +240,9 @@ static void i40e_dcbnl_del_app(struct i40e_pf *pf,
 	for (v = 0; v < pf->num_alloc_vsi; v++) {
 		if (pf->vsi[v] && pf->vsi[v]->netdev) {
 			err = i40e_dcbnl_vsi_del_app(pf->vsi[v], app);
-			if (err)
-				dev_info(&pf->pdev->dev, "Failed deleting app for VSI seid=%d err=%d sel=%d proto=0x%x prio=%d\n",
-					 pf->vsi[v]->seid, err, app->selector,
-					 app->protocolid, app->priority);
+			dev_dbg(&pf->pdev->dev, "Deleting app for VSI seid=%d err=%d sel=%d proto=0x%x prio=%d\n",
+				pf->vsi[v]->seid, err, app->selector,
+				app->protocolid, app->priority);
 		}
 	}
 }

drivers/net/ethernet/intel/i40e/i40e_debugfs.c

@@ -953,24 +953,6 @@ static void i40e_dbg_dump_veb_all(struct i40e_pf *pf)
 	}
 }
 
-/**
- * i40e_dbg_cmd_fd_ctrl - Enable/disable FD sideband/ATR
- * @pf: the PF that would be altered
- * @flag: flag that needs enabling or disabling
- * @enable: Enable/disable FD SD/ATR
- **/
-static void i40e_dbg_cmd_fd_ctrl(struct i40e_pf *pf, u64 flag, bool enable)
-{
-	if (enable) {
-		pf->flags |= flag;
-	} else {
-		pf->flags &= ~flag;
-		pf->auto_disable_flags |= flag;
-	}
-	dev_info(&pf->pdev->dev, "requesting a PF reset\n");
-	i40e_do_reset_safe(pf, BIT(__I40E_PF_RESET_REQUESTED));
-}
-
 #define I40E_MAX_DEBUG_OUT_BUFFER (4096*4)
 /**
  * i40e_dbg_command_write - write into command datum
@@ -1759,10 +1741,6 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
 		raw_packet = NULL;
 		kfree(asc_packet);
 		asc_packet = NULL;
-	} else if (strncmp(cmd_buf, "fd-atr off", 10) == 0) {
-		i40e_dbg_cmd_fd_ctrl(pf, I40E_FLAG_FD_ATR_ENABLED, false);
-	} else if (strncmp(cmd_buf, "fd-atr on", 9) == 0) {
-		i40e_dbg_cmd_fd_ctrl(pf, I40E_FLAG_FD_ATR_ENABLED, true);
 	} else if (strncmp(cmd_buf, "fd current cnt", 14) == 0) {
 		dev_info(&pf->pdev->dev, "FD current total filter count for this interface: %d\n",
 			 i40e_get_current_fd_count(pf));
@@ -1989,8 +1967,6 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
 		dev_info(&pf->pdev->dev, "  send indirect aq_cmd <flags> <opcode> <datalen> <retval> <cookie_h> <cookie_l> <param0> <param1> <param2> <param3> <buffer_len>\n");
 		dev_info(&pf->pdev->dev, "  add fd_filter <dest q_index> <flex_off> <pctype> <dest_vsi> <dest_ctl> <fd_status> <cnt_index> <fd_id> <packet_len> <packet>\n");
 		dev_info(&pf->pdev->dev, "  rem fd_filter <dest q_index> <flex_off> <pctype> <dest_vsi> <dest_ctl> <fd_status> <cnt_index> <fd_id> <packet_len> <packet>\n");
-		dev_info(&pf->pdev->dev, "  fd-atr off\n");
-		dev_info(&pf->pdev->dev, "  fd-atr on\n");
 		dev_info(&pf->pdev->dev, "  fd current cnt");
 		dev_info(&pf->pdev->dev, "  lldp start\n");
 		dev_info(&pf->pdev->dev, "  lldp stop\n");

drivers/net/ethernet/intel/i40e/i40e_ethtool.c

@@ -90,9 +90,6 @@ static const struct i40e_stats i40e_gstrings_misc_stats[] = {
 	I40E_VSI_STAT("tx_linearize", tx_linearize),
 };
 
-static int i40e_add_fdir_ethtool(struct i40e_vsi *vsi,
-				 struct ethtool_rxnfc *cmd);
-
 /* These PF_STATs might look like duplicates of some NETDEV_STATs,
  * but they are separate.  This device supports Virtualization, and
  * as such might have several netdevs supporting VMDq and FCoE going
@@ -231,6 +228,7 @@ static const char i40e_gstrings_test[][ETH_GSTRING_LEN] = {
 static const char i40e_priv_flags_strings[][ETH_GSTRING_LEN] = {
 	"NPAR",
 	"LinkPolling",
+	"flow-director-atr",
 };
 
 #define I40E_PRIV_FLAGS_STR_LEN ARRAY_SIZE(i40e_priv_flags_strings)
@@ -254,7 +252,8 @@ static void i40e_partition_setting_complaint(struct i40e_pf *pf)
  **/
 static void i40e_get_settings_link_up(struct i40e_hw *hw,
 				      struct ethtool_cmd *ecmd,
-				      struct net_device *netdev)
+				      struct net_device *netdev,
+				      struct i40e_pf *pf)
 {
 	struct i40e_link_status *hw_link_info = &hw->phy.link_info;
 	u32 link_speed = hw_link_info->link_speed;
@@ -298,16 +297,18 @@ static void i40e_get_settings_link_up(struct i40e_hw *hw,
 		break;
 	case I40E_PHY_TYPE_10GBASE_T:
 	case I40E_PHY_TYPE_1000BASE_T:
-	case I40E_PHY_TYPE_100BASE_TX:
 		ecmd->supported = SUPPORTED_Autoneg |
 				  SUPPORTED_10000baseT_Full |
-				  SUPPORTED_1000baseT_Full |
-				  SUPPORTED_100baseT_Full;
+				  SUPPORTED_1000baseT_Full;
 		ecmd->advertising = ADVERTISED_Autoneg;
 		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
 			ecmd->advertising |= ADVERTISED_10000baseT_Full;
 		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_1GB)
 			ecmd->advertising |= ADVERTISED_1000baseT_Full;
+		break;
+	case I40E_PHY_TYPE_100BASE_TX:
+		ecmd->supported = SUPPORTED_Autoneg |
+				  SUPPORTED_100baseT_Full;
 		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_100MB)
 			ecmd->advertising |= ADVERTISED_100baseT_Full;
 		break;
@@ -327,12 +328,15 @@ static void i40e_get_settings_link_up(struct i40e_hw *hw,
 		break;
 	case I40E_PHY_TYPE_SGMII:
 		ecmd->supported = SUPPORTED_Autoneg |
-				  SUPPORTED_1000baseT_Full |
-				  SUPPORTED_100baseT_Full;
+				  SUPPORTED_1000baseT_Full;
 		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_1GB)
 			ecmd->advertising |= ADVERTISED_1000baseT_Full;
-		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_100MB)
-			ecmd->advertising |= ADVERTISED_100baseT_Full;
+		if (pf->hw.mac.type == I40E_MAC_X722) {
+			ecmd->supported |= SUPPORTED_100baseT_Full;
+			if (hw_link_info->requested_speeds &
+			    I40E_LINK_SPEED_100MB)
+				ecmd->advertising |= ADVERTISED_100baseT_Full;
+		}
 		break;
 	/* Backplane is set based on supported phy types in get_settings
 	 * so don't set anything here but don't warn either
@@ -380,7 +384,8 @@ static void i40e_get_settings_link_up(struct i40e_hw *hw,
  * Reports link settings that can be determined when link is down
  **/
 static void i40e_get_settings_link_down(struct i40e_hw *hw,
-					struct ethtool_cmd *ecmd)
+					struct ethtool_cmd *ecmd,
+					struct i40e_pf *pf)
 {
 	enum i40e_aq_capabilities_phy_type phy_types = hw->phy.phy_types;
 
@@ -391,11 +396,13 @@ static void i40e_get_settings_link_down(struct i40e_hw *hw,
 	ecmd->advertising = 0x0;
 	if (phy_types & I40E_CAP_PHY_TYPE_SGMII) {
 		ecmd->supported |= SUPPORTED_Autoneg |
-				   SUPPORTED_1000baseT_Full |
-				   SUPPORTED_100baseT_Full;
+				   SUPPORTED_1000baseT_Full;
 		ecmd->advertising |= ADVERTISED_Autoneg |
-				     ADVERTISED_1000baseT_Full |
-				     ADVERTISED_100baseT_Full;
+				     ADVERTISED_1000baseT_Full;
+		if (pf->hw.mac.type == I40E_MAC_X722) {
+			ecmd->supported |= SUPPORTED_100baseT_Full;
+			ecmd->advertising |= ADVERTISED_100baseT_Full;
+		}
 	}
 	if (phy_types & I40E_CAP_PHY_TYPE_XAUI ||
 	    phy_types & I40E_CAP_PHY_TYPE_XFI ||
@@ -424,7 +431,8 @@ static void i40e_get_settings_link_down(struct i40e_hw *hw,
 		ecmd->advertising |= ADVERTISED_Autoneg |
 				    ADVERTISED_40000baseCR4_Full;
 	}
-	if (phy_types & I40E_CAP_PHY_TYPE_100BASE_TX) {
+	if ((phy_types & I40E_CAP_PHY_TYPE_100BASE_TX) &&
+	    !(phy_types & I40E_CAP_PHY_TYPE_1000BASE_T)) {
 		ecmd->supported |= SUPPORTED_Autoneg |
 				   SUPPORTED_100baseT_Full;
 		ecmd->advertising |= ADVERTISED_Autoneg |
@@ -466,9 +474,9 @@ static int i40e_get_settings(struct net_device *netdev,
 	bool link_up = hw_link_info->link_info & I40E_AQ_LINK_UP;
 
 	if (link_up)
-		i40e_get_settings_link_up(hw, ecmd, netdev);
+		i40e_get_settings_link_up(hw, ecmd, netdev, pf);
 	else
-		i40e_get_settings_link_down(hw, ecmd);
+		i40e_get_settings_link_down(hw, ecmd, pf);
 
 	/* Now set the settings that don't rely on link being up/down */
 
@@ -2666,6 +2674,8 @@ static u32 i40e_get_priv_flags(struct net_device *dev)
 		I40E_PRIV_FLAGS_NPAR_FLAG : 0;
 	ret_flags |= pf->flags & I40E_FLAG_LINK_POLLING_ENABLED ?
 		I40E_PRIV_FLAGS_LINKPOLL_FLAG : 0;
+	ret_flags |= pf->flags & I40E_FLAG_FD_ATR_ENABLED ?
+		I40E_PRIV_FLAGS_FD_ATR : 0;
 
 	return ret_flags;
 }
@@ -2686,6 +2696,17 @@ static int i40e_set_priv_flags(struct net_device *dev, u32 flags)
 	else
 		pf->flags &= ~I40E_FLAG_LINK_POLLING_ENABLED;
 
+	/* allow the user to control the state of the Flow
+	 * Director ATR (Application Targeted Routing) feature
+	 * of the driver
+	 */
+	if (flags & I40E_PRIV_FLAGS_FD_ATR) {
+		pf->flags |= I40E_FLAG_FD_ATR_ENABLED;
+	} else {
+		pf->flags &= ~I40E_FLAG_FD_ATR_ENABLED;
+		pf->auto_disable_flags |= I40E_FLAG_FD_ATR_ENABLED;
+	}
+
 	return 0;
 }
 

drivers/net/ethernet/intel/i40e/i40e_fcoe.c

@@ -284,7 +284,7 @@ void i40e_init_pf_fcoe(struct i40e_pf *pf)
 	pf->fcoe_hmc_filt_num = 0;
 
 	if (!pf->hw.func_caps.fcoe) {
-		dev_info(&pf->pdev->dev, "FCoE capability is disabled\n");
+		dev_dbg(&pf->pdev->dev, "FCoE capability is disabled\n");
 		return;
 	}
 

drivers/net/ethernet/intel/i40e/i40e_main.c

@@ -39,7 +39,7 @@ static const char i40e_driver_string[] =
 
 #define DRV_VERSION_MAJOR 1
 #define DRV_VERSION_MINOR 3
-#define DRV_VERSION_BUILD 25
+#define DRV_VERSION_BUILD 28
 #define DRV_VERSION __stringify(DRV_VERSION_MAJOR) "." \
 	     __stringify(DRV_VERSION_MINOR) "." \
 	     __stringify(DRV_VERSION_BUILD)    DRV_KERN
@@ -4844,8 +4844,8 @@ static int i40e_init_pf_dcb(struct i40e_pf *pf)
  */
 void i40e_print_link_message(struct i40e_vsi *vsi, bool isup)
 {
-	char speed[SPEED_SIZE] = "Unknown";
-	char fc[FC_SIZE] = "RX/TX";
+	char *speed = "Unknown";
+	char *fc = "Unknown";
 
 	if (vsi->current_isup == isup)
 		return;
@@ -4866,19 +4866,19 @@ void i40e_print_link_message(struct i40e_vsi *vsi, bool isup)
 
 	switch (vsi->back->hw.phy.link_info.link_speed) {
 	case I40E_LINK_SPEED_40GB:
-		strlcpy(speed, "40 Gbps", SPEED_SIZE);
+		speed = "40 G";
 		break;
 	case I40E_LINK_SPEED_20GB:
-		strncpy(speed, "20 Gbps", SPEED_SIZE);
+		speed = "20 G";
 		break;
 	case I40E_LINK_SPEED_10GB:
-		strlcpy(speed, "10 Gbps", SPEED_SIZE);
+		speed = "10 G";
 		break;
 	case I40E_LINK_SPEED_1GB:
-		strlcpy(speed, "1000 Mbps", SPEED_SIZE);
+		speed = "1000 M";
 		break;
 	case I40E_LINK_SPEED_100MB:
-		strncpy(speed, "100 Mbps", SPEED_SIZE);
+		speed = "100 M";
 		break;
 	default:
 		break;
@@ -4886,20 +4886,20 @@ void i40e_print_link_message(struct i40e_vsi *vsi, bool isup)
 
 	switch (vsi->back->hw.fc.current_mode) {
 	case I40E_FC_FULL:
-		strlcpy(fc, "RX/TX", FC_SIZE);
+		fc = "RX/TX";
 		break;
 	case I40E_FC_TX_PAUSE:
-		strlcpy(fc, "TX", FC_SIZE);
+		fc = "TX";
 		break;
 	case I40E_FC_RX_PAUSE:
-		strlcpy(fc, "RX", FC_SIZE);
+		fc = "RX";
 		break;
 	default:
-		strlcpy(fc, "None", FC_SIZE);
+		fc = "None";
 		break;
 	}
 
-	netdev_info(vsi->netdev, "NIC Link is Up %s Full Duplex, Flow Control: %s\n",
+	netdev_info(vsi->netdev, "NIC Link is Up %sbps Full Duplex, Flow Control: %s\n",
 		    speed, fc);
 }
 
@@ -6353,12 +6353,6 @@ static int i40e_get_capabilities(struct i40e_pf *pf)
 		}
 	} while (err);
 
-	if (((pf->hw.aq.fw_maj_ver == 2) && (pf->hw.aq.fw_min_ver < 22)) ||
-	    (pf->hw.aq.fw_maj_ver < 2)) {
-		pf->hw.func_caps.num_msix_vectors++;
-		pf->hw.func_caps.num_msix_vectors_vf++;
-	}
-
 	if (pf->hw.debug_mask & I40E_DEBUG_USER)
 		dev_info(&pf->pdev->dev,
 			 "pf=%d, num_vfs=%d, msix_pf=%d, msix_vf=%d, fd_g=%d, fd_b=%d, pf_max_q=%d num_vsi=%d\n",
@@ -6593,9 +6587,9 @@ static void i40e_reset_and_rebuild(struct i40e_pf *pf, bool reinit)
 	/* make sure our flow control settings are restored */
 	ret = i40e_set_fc(&pf->hw, &set_fc_aq_fail, true);
 	if (ret)
-		dev_info(&pf->pdev->dev, "set fc fail, err %s aq_err %s\n",
-			 i40e_stat_str(&pf->hw, ret),
-			 i40e_aq_str(&pf->hw, pf->hw.aq.asq_last_status));
+		dev_dbg(&pf->pdev->dev, "setting flow control: ret = %s last_status = %s\n",
+			i40e_stat_str(&pf->hw, ret),
+			i40e_aq_str(&pf->hw, pf->hw.aq.asq_last_status));
 
 	/* Rebuild the VSIs and VEBs that existed before reset.
 	 * They are still in our local switch element arrays, so only
@@ -7955,12 +7949,12 @@ static int i40e_sw_init(struct i40e_pf *pf)
 	    (pf->hw.func_caps.fd_filters_best_effort > 0)) {
 		pf->flags |= I40E_FLAG_FD_ATR_ENABLED;
 		pf->atr_sample_rate = I40E_DEFAULT_ATR_SAMPLE_RATE;
-		if (!(pf->flags & I40E_FLAG_MFP_ENABLED)) {
-			pf->flags |= I40E_FLAG_FD_SB_ENABLED;
-		} else {
+		if (pf->flags & I40E_FLAG_MFP_ENABLED &&
+		    pf->hw.num_partitions > 1)
 			dev_info(&pf->pdev->dev,
 				 "Flow Director Sideband mode Disabled in MFP mode\n");
-		}
+		else
+			pf->flags |= I40E_FLAG_FD_SB_ENABLED;
 		pf->fdir_pf_filter_count =
 				 pf->hw.func_caps.fd_filters_guaranteed;
 		pf->hw.fdir_shared_filter_count =
@@ -8330,6 +8324,7 @@ static int i40e_ndo_bridge_setlink(struct net_device *dev,
  * @seq: RTNL message seq #
  * @dev: the netdev being configured
  * @filter_mask: unused
+ * @nlflags: netlink flags passed in
  *
  * Return the mode in which the hardware bridge is operating in
  * i.e VEB or VEPA.
@@ -9846,8 +9841,14 @@ static void i40e_determine_queue_usage(struct i40e_pf *pf)
 	}
 
 	pf->queues_left = queues_left;
+	dev_dbg(&pf->pdev->dev,
+		"qs_avail=%d FD SB=%d lan_qs=%d lan_tc0=%d vf=%d*%d vmdq=%d*%d, remaining=%d\n",
+		pf->hw.func_caps.num_tx_qp,
+		!!(pf->flags & I40E_FLAG_FD_SB_ENABLED),
+		pf->num_lan_qps, pf->rss_size, pf->num_req_vfs, pf->num_vf_qps,
+		pf->num_vmdq_vsis, pf->num_vmdq_qps, queues_left);
 #ifdef I40E_FCOE
-	dev_info(&pf->pdev->dev, "fcoe queues = %d\n", pf->num_fcoe_qps);
+	dev_dbg(&pf->pdev->dev, "fcoe queues = %d\n", pf->num_fcoe_qps);
 #endif
 }
 
@@ -10307,35 +10308,63 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	i40e_fcoe_vsi_setup(pf);
 
 #endif
-	/* Get the negotiated link width and speed from PCI config space */
-	pcie_capability_read_word(pf->pdev, PCI_EXP_LNKSTA, &link_status);
+#define PCI_SPEED_SIZE 8
+#define PCI_WIDTH_SIZE 8
+	/* Devices on the IOSF bus do not have this information
+	 * and will report PCI Gen 1 x 1 by default so don't bother
+	 * checking them.
+	 */
+	if (!(pf->flags & I40E_FLAG_NO_PCI_LINK_CHECK)) {
+		char speed[PCI_SPEED_SIZE] = "Unknown";
+		char width[PCI_WIDTH_SIZE] = "Unknown";
 
-	i40e_set_pci_config_data(hw, link_status);
+		/* Get the negotiated link width and speed from PCI config
+		 * space
+		 */
+		pcie_capability_read_word(pf->pdev, PCI_EXP_LNKSTA,
+					  &link_status);
+
+		i40e_set_pci_config_data(hw, link_status);
+
+		switch (hw->bus.speed) {
+		case i40e_bus_speed_8000:
+			strncpy(speed, "8.0", PCI_SPEED_SIZE); break;
+		case i40e_bus_speed_5000:
+			strncpy(speed, "5.0", PCI_SPEED_SIZE); break;
+		case i40e_bus_speed_2500:
+			strncpy(speed, "2.5", PCI_SPEED_SIZE); break;
+		default:
+			break;
+		}
+		switch (hw->bus.width) {
+		case i40e_bus_width_pcie_x8:
+			strncpy(width, "8", PCI_WIDTH_SIZE); break;
+		case i40e_bus_width_pcie_x4:
+			strncpy(width, "4", PCI_WIDTH_SIZE); break;
+		case i40e_bus_width_pcie_x2:
+			strncpy(width, "2", PCI_WIDTH_SIZE); break;
+		case i40e_bus_width_pcie_x1:
+			strncpy(width, "1", PCI_WIDTH_SIZE); break;
+		default:
+			break;
+		}
 
-	dev_info(&pdev->dev, "PCI-Express: %s %s\n",
-		(hw->bus.speed == i40e_bus_speed_8000 ? "Speed 8.0GT/s" :
-		 hw->bus.speed == i40e_bus_speed_5000 ? "Speed 5.0GT/s" :
-		 hw->bus.speed == i40e_bus_speed_2500 ? "Speed 2.5GT/s" :
-		 "Unknown"),
-		(hw->bus.width == i40e_bus_width_pcie_x8 ? "Width x8" :
-		 hw->bus.width == i40e_bus_width_pcie_x4 ? "Width x4" :
-		 hw->bus.width == i40e_bus_width_pcie_x2 ? "Width x2" :
-		 hw->bus.width == i40e_bus_width_pcie_x1 ? "Width x1" :
-		 "Unknown"));
+		dev_info(&pdev->dev, "PCI-Express: Speed %sGT/s Width x%s\n",
+			 speed, width);
 
-	if (hw->bus.width < i40e_bus_width_pcie_x8 ||
-	    hw->bus.speed < i40e_bus_speed_8000) {
-		dev_warn(&pdev->dev, "PCI-Express bandwidth available for this device may be insufficient for optimal performance.\n");
-		dev_warn(&pdev->dev, "Please move the device to a different PCI-e link with more lanes and/or higher transfer rate.\n");
+		if (hw->bus.width < i40e_bus_width_pcie_x8 ||
+		    hw->bus.speed < i40e_bus_speed_8000) {
+			dev_warn(&pdev->dev, "PCI-Express bandwidth available for this device may be insufficient for optimal performance.\n");
+			dev_warn(&pdev->dev, "Please move the device to a different PCI-e link with more lanes and/or higher transfer rate.\n");
+		}
 	}
 
 	/* get the requested speeds from the fw */
 	err = i40e_aq_get_phy_capabilities(hw, false, false, &abilities, NULL);
 	if (err)
-		dev_info(&pf->pdev->dev,
-			 "get phy capabilities failed, err %s aq_err %s, advertised speed settings may not be correct\n",
-			 i40e_stat_str(&pf->hw, err),
-			 i40e_aq_str(&pf->hw, pf->hw.aq.asq_last_status));
+		dev_dbg(&pf->pdev->dev, "get requested speeds ret =  %s last_status =  %s\n",
+			i40e_stat_str(&pf->hw, err),
+			i40e_aq_str(&pf->hw, pf->hw.aq.asq_last_status));
 	pf->hw.phy.link_info.requested_speeds = abilities.link_speed;
 
 	/* get the supported phy types from the fw */

drivers/net/ethernet/intel/i40e/i40e_virtchnl.h

@@ -150,6 +150,7 @@ struct i40e_virtchnl_vsi_resource {
 #define I40E_VIRTCHNL_VF_OFFLOAD_FCOE		0x00000004
 #define I40E_VIRTCHNL_VF_OFFLOAD_RSS_AQ		0x00000008
 #define I40E_VIRTCHNL_VF_OFFLOAD_RSS_REG	0x00000010
+#define I40E_VIRTCHNL_VF_OFFLOAD_WB_ON_ITR	0x00000020
 #define I40E_VIRTCHNL_VF_OFFLOAD_VLAN		0x00010000
 #define I40E_VIRTCHNL_VF_OFFLOAD_RX_POLLING	0x00020000
 

drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c

@@ -1203,6 +1203,10 @@ static int i40e_vc_get_vf_resources_msg(struct i40e_vf *vf, u8 *msg)
 	} else {
 		vfres->vf_offload_flags |= I40E_VIRTCHNL_VF_OFFLOAD_RSS_REG;
 	}
+
+	if (vf->driver_caps & I40E_VIRTCHNL_VF_OFFLOAD_RX_POLLING)
+		vfres->vf_offload_flags |= I40E_VIRTCHNL_VF_OFFLOAD_RX_POLLING;
+
 	vfres->num_vsis = num_vsis;
 	vfres->num_queue_pairs = vf->num_queue_pairs;
 	vfres->max_vectors = pf->hw.func_caps.num_msix_vectors_vf;

drivers/net/ethernet/intel/i40evf/i40e_virtchnl.h

@@ -150,6 +150,7 @@ struct i40e_virtchnl_vsi_resource {
 #define I40E_VIRTCHNL_VF_OFFLOAD_FCOE		0x00000004
 #define I40E_VIRTCHNL_VF_OFFLOAD_RSS_AQ		0x00000008
 #define I40E_VIRTCHNL_VF_OFFLOAD_RSS_REG	0x00000010
+#define I40E_VIRTCHNL_VF_OFFLOAD_WB_ON_ITR	0x00000020
 #define I40E_VIRTCHNL_VF_OFFLOAD_VLAN		0x00010000
 #define I40E_VIRTCHNL_VF_OFFLOAD_RX_POLLING	0x00020000
 

drivers/net/ethernet/intel/i40evf/i40evf_main.c

@@ -34,7 +34,7 @@ char i40evf_driver_name[] = "i40evf";
 static const char i40evf_driver_string[] =
 	"Intel(R) XL710/X710 Virtual Function Network Driver";
 
-#define DRV_VERSION "1.3.17"
+#define DRV_VERSION "1.3.19"
 const char i40evf_driver_version[] = DRV_VERSION;
 static const char i40evf_copyright[] =
 	"Copyright (c) 2013 - 2015 Intel Corporation.";
@@ -1123,6 +1123,8 @@ static int i40evf_alloc_queues(struct i40evf_adapter *adapter)
 		tx_ring->netdev = adapter->netdev;
 		tx_ring->dev = &adapter->pdev->dev;
 		tx_ring->count = adapter->tx_desc_count;
+		if (adapter->flags & I40E_FLAG_WB_ON_ITR_CAPABLE)
+			tx_ring->flags |= I40E_TXR_FLAGS_WB_ON_ITR;
 		adapter->tx_rings[i] = tx_ring;
 
 		rx_ring = &tx_ring[1];
@@ -1626,7 +1628,7 @@ static void i40evf_reset_task(struct work_struct *work)
 	/* extra wait to make sure minimum wait is met */
 	msleep(I40EVF_RESET_WAIT_MS);
 	if (i == I40EVF_RESET_WAIT_COUNT) {
-		struct i40evf_mac_filter *f, *ftmp;
+		struct i40evf_mac_filter *ftmp;
 		struct i40evf_vlan_filter *fv, *fvtmp;
 
 		/* reset never finished */
@@ -2275,6 +2277,9 @@ static void i40evf_init_task(struct work_struct *work)
 	if (err)
 		goto err_sw_init;
 	i40evf_map_rings_to_vectors(adapter);
+	if (adapter->vf_res->vf_offload_flags &
+		    I40E_VIRTCHNL_VF_OFFLOAD_WB_ON_ITR)
+		adapter->flags |= I40EVF_FLAG_WB_ON_ITR_CAPABLE;
 	if (!RSS_AQ(adapter))
 		i40evf_configure_rss(adapter);
 	err = i40evf_request_misc_irq(adapter);
@@ -2310,7 +2315,7 @@ static void i40evf_init_task(struct work_struct *work)
 	}
 	return;
 restart:
-	schedule_delayed_work(&adapter->init_task, msecs_to_jiffies(30));
+	schedule_delayed_work(&adapter->init_task, msecs_to_jiffies(20));
 	return;
 
 err_register:
@@ -2327,7 +2332,7 @@ static void i40evf_init_task(struct work_struct *work)
 		adapter->flags |= I40EVF_FLAG_PF_COMMS_FAILED;
 		return; /* do not reschedule */
 	}
-	schedule_delayed_work(&adapter->init_task, HZ * 3);
+	schedule_delayed_work(&adapter->init_task, HZ / 2);
 }
 
 /**

drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c

@@ -156,7 +156,8 @@ int i40evf_send_vf_config_msg(struct i40evf_adapter *adapter)
 	caps = I40E_VIRTCHNL_VF_OFFLOAD_L2 |
 	       I40E_VIRTCHNL_VF_OFFLOAD_RSS_AQ |
 	       I40E_VIRTCHNL_VF_OFFLOAD_RSS_REG |
-	       I40E_VIRTCHNL_VF_OFFLOAD_VLAN;
+	       I40E_VIRTCHNL_VF_OFFLOAD_VLAN |
+	       I40E_VIRTCHNL_VF_OFFLOAD_WB_ON_ITR;
 	adapter->current_op = I40E_VIRTCHNL_OP_GET_VF_RESOURCES;
 	adapter->aq_required &= ~I40EVF_FLAG_AQ_GET_CONFIG;
 	if (PF_IS_V11(adapter))

drivers/net/ethernet/intel/ixgbe/ixgbe_main.c

@@ -5307,7 +5307,6 @@ static int ixgbe_sw_init(struct ixgbe_adapter *adapter)
 	rss = min_t(int, ixgbe_max_rss_indices(adapter), num_online_cpus());
 	adapter->ring_feature[RING_F_RSS].limit = rss;
 	adapter->flags2 |= IXGBE_FLAG2_RSC_CAPABLE;
-	adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED;
 	adapter->max_q_vectors = MAX_Q_VECTORS_82599;
 	adapter->atr_sample_rate = 20;
 	fdir = min_t(int, IXGBE_MAX_FDIR_INDICES, num_online_cpus());
@@ -5333,7 +5332,6 @@ static int ixgbe_sw_init(struct ixgbe_adapter *adapter)
 	switch (hw->mac.type) {
 	case ixgbe_mac_82598EB:
 		adapter->flags2 &= ~IXGBE_FLAG2_RSC_CAPABLE;
-		adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED;
 
 		if (hw->device_id == IXGBE_DEV_ID_82598AT)
 			adapter->flags |= IXGBE_FLAG_FAN_FAIL_CAPABLE;

drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c

@@ -198,6 +198,7 @@ static s32 ixgbe_write_pe(struct ixgbe_hw *hw, u8 reg, u8 value)
  * ixgbe_reset_cs4227 - Reset CS4227 using port expander
  * @hw: pointer to hardware structure
  *
+ * This function assumes that the caller has acquired the proper semaphore.
  * Returns error code
  */
 static s32 ixgbe_reset_cs4227(struct ixgbe_hw *hw)
@@ -296,6 +297,14 @@ static void ixgbe_check_cs4227(struct ixgbe_hw *hw)
 		hw->mac.ops.release_swfw_sync(hw, swfw_mask);
 		msleep(IXGBE_CS4227_CHECK_DELAY);
 	}
+	/* If still pending, assume other instance failed. */
+	if (retry == IXGBE_CS4227_RETRIES) {
+		status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask);
+		if (status) {
+			hw_err(hw, "semaphore failed with %d\n", status);
+			return;
+		}
+	}
 
 	/* Reset the CS4227. */
 	status = ixgbe_reset_cs4227(hw);
@@ -1608,7 +1617,7 @@ static s32 ixgbe_handle_lasi_ext_t_x550em(struct ixgbe_hw *hw)
 	if (status)
 		return status;
 
-	if (lsc)
+	if (lsc && phy->ops.setup_internal_link)
 		return phy->ops.setup_internal_link(hw);
 
 	return 0;