ARM: 7300/1: realview: fix definition of GPIO0 interrupt on PB1176 to match TRM

Currently, -1 is used as the GPIO0 interrupt on realview PB1176 and an
AMBA device is registered with this parameter. With the pending NO_IRQ
cleanup, this will lead to a warning at boot time, since -1 is obviously
broken.

This patch updates the interrupt used for GPIO0 to match that specified
by the TRM. Unfortunately, it's not clear how to trigger this interrupt
so we trust that the documentation is correct.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-realview/include/mach/irqs-pb1176.h

@@ -40,6 +40,7 @@
 #define IRQ_DC1176_L2CC		(IRQ_DC1176_GIC_START + 13)
 #define IRQ_DC1176_RTC		(IRQ_DC1176_GIC_START + 14)
 #define IRQ_DC1176_CLCD		(IRQ_DC1176_GIC_START + 15)	/* CLCD controller */
+#define IRQ_DC1176_GPIO0	(IRQ_DC1176_GIC_START + 16)
 #define IRQ_DC1176_SSP		(IRQ_DC1176_GIC_START + 17)	/* SSP port */
 #define IRQ_DC1176_UART0	(IRQ_DC1176_GIC_START + 18)	/* UART 0 on development chip */
 #define IRQ_DC1176_UART1	(IRQ_DC1176_GIC_START + 19)	/* UART 1 on development chip */
@@ -73,7 +74,6 @@
 #define IRQ_PB1176_DMAC		(IRQ_PB1176_GIC_START + 24)	/* DMA controller */
 #define IRQ_PB1176_RTC		(IRQ_PB1176_GIC_START + 25)	/* Real Time Clock */
 
-#define IRQ_PB1176_GPIO0	-1
 #define IRQ_PB1176_SCTL		-1
 
 #define NR_GIC_PB1176		2

arch/arm/mach-realview/realview_pb1176.c

@@ -143,7 +143,7 @@ static struct pl022_ssp_controller ssp0_plat_data = {
 #define PB1176_CLCD_IRQ	{ IRQ_DC1176_CLCD, NO_IRQ }
 #define SCTL_IRQ	{ NO_IRQ, NO_IRQ }
 #define PB1176_WATCHDOG_IRQ	{ IRQ_DC1176_WATCHDOG, NO_IRQ }
-#define PB1176_GPIO0_IRQ	{ IRQ_PB1176_GPIO0, NO_IRQ }
+#define PB1176_GPIO0_IRQ	{ IRQ_DC1176_GPIO0, NO_IRQ }
 #define GPIO1_IRQ	{ IRQ_PB1176_GPIO1, NO_IRQ }
 #define PB1176_RTC_IRQ	{ IRQ_DC1176_RTC, NO_IRQ }
 #define SCI_IRQ		{ IRQ_PB1176_SCI, NO_IRQ }