提交 dfb7e621 编写于 作者: B Borislav Petkov

ide-atapi: switch to blk_rq_bytes() on do_request() path

After the recent struct request cleanups, blk_rq_bytes() is guaranteed
to be valid and is the current total length of the rq's bio. Use that
instead of pc->req_xfer in the do_request() path after the command has
been queued

The remaining usage of pc->req_xfer now is only until we map the rq to a
bio.

While at it:

- remove local caching of rq completion length in ide_tape_issue_pc()
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
上级 10c0b343
......@@ -370,7 +370,7 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
? "write" : "read");
pc->flags |= PC_FLAG_DMA_ERROR;
} else
pc->xferred = pc->req_xfer;
pc->xferred = blk_rq_bytes(rq);
debug_log("%s: DMA finished\n", drive->name);
}
......@@ -627,7 +627,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_cmd *cmd)
ide_hwif_t *hwif = drive->hwif;
ide_expiry_t *expiry = NULL;
struct request *rq = hwif->rq;
unsigned int timeout;
unsigned int timeout, bytes;
u16 bcount;
u8 valid_tf;
u8 drq_int = !!(drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT);
......@@ -647,9 +647,11 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_cmd *cmd)
pc->xferred = 0;
valid_tf = IDE_VALID_DEVICE;
bcount = ((drive->media == ide_tape) ?
pc->req_xfer :
min(pc->req_xfer, 63 * 1024));
bytes = blk_rq_bytes(rq);
bcount = ((drive->media == ide_tape) ? bytes
: min_t(unsigned int,
bytes, 63 * 1024));
if (pc->flags & PC_FLAG_DMA_ERROR) {
pc->flags &= ~PC_FLAG_DMA_ERROR;
......
......@@ -210,7 +210,7 @@ static void idefloppy_create_rw_cmd(ide_drive_t *drive,
if (rq->cmd_flags & REQ_RW)
pc->flags |= PC_FLAG_WRITING;
pc->buf = NULL;
pc->req_xfer = pc->buf_size = blocks * floppy->block_size;
pc->buf_size = blk_rq_bytes(rq);
pc->flags |= PC_FLAG_DMA_OK;
}
......@@ -227,7 +227,7 @@ static void idefloppy_blockpc_cmd(struct ide_disk_obj *floppy,
}
/* pio will be performed by ide_pio_bytes() which handles sg fine */
pc->buf = NULL;
pc->req_xfer = pc->buf_size = blk_rq_bytes(rq);
pc->buf_size = blk_rq_bytes(rq);
}
static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
......@@ -286,8 +286,8 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
cmd.rq = rq;
if (blk_fs_request(rq) || pc->req_xfer) {
ide_init_sg_cmd(&cmd, pc->req_xfer);
if (blk_fs_request(rq) || blk_rq_bytes(rq)) {
ide_init_sg_cmd(&cmd, blk_rq_bytes(rq));
ide_map_sg(drive, &cmd);
}
......
......@@ -292,6 +292,7 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
{
idetape_tape_t *tape = drive->driver_data;
struct ide_atapi_pc *pc = drive->failed_pc;
struct request *rq = drive->hwif->rq;
tape->sense_key = sense[2] & 0xF;
tape->asc = sense[12];
......@@ -302,7 +303,7 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
/* Correct pc->xferred by asking the tape. */
if (pc->flags & PC_FLAG_DMA_ERROR)
pc->xferred = pc->req_xfer -
pc->xferred = blk_rq_bytes(rq) -
tape->blk_size *
get_unaligned_be32(&sense[3]);
......@@ -484,6 +485,7 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive,
struct ide_atapi_pc *pc)
{
idetape_tape_t *tape = drive->driver_data;
struct request *rq = drive->hwif->rq;
if (drive->failed_pc == NULL && pc->c[0] != REQUEST_SENSE)
drive->failed_pc = pc;
......@@ -493,7 +495,6 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive,
if (pc->retries > IDETAPE_MAX_PC_RETRIES ||
(pc->flags & PC_FLAG_ABORT)) {
unsigned int done = blk_rq_bytes(drive->hwif->rq);
/*
* We will "abort" retrying a packet command in case legitimate
......@@ -517,7 +518,7 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive,
drive->failed_pc = NULL;
drive->pc_callback(drive, 0);
ide_complete_rq(drive, -EIO, done);
ide_complete_rq(drive, -EIO, blk_rq_bytes(rq));
return ide_stopped;
}
debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]);
......@@ -592,9 +593,8 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape,
put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
pc->c[1] = 1;
pc->buf = NULL;
pc->buf_size = length * tape->blk_size;
pc->req_xfer = pc->buf_size;
if (pc->req_xfer == tape->buffer_size)
pc->buf_size = blk_rq_bytes(rq);
if (pc->buf_size == tape->buffer_size)
pc->flags |= PC_FLAG_DMA_OK;
if (opcode == READ_6)
......@@ -718,7 +718,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
cmd.rq = rq;
ide_init_sg_cmd(&cmd, pc->req_xfer);
ide_init_sg_cmd(&cmd, blk_rq_bytes(rq));
ide_map_sg(drive, &cmd);
return ide_tape_issue_pc(drive, &cmd, pc);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册