[SCSI] Lpfc 8.3.28: FC and SCSI Discovery Fixes

FC and SCSI Discovery Fixes:

- Clear the virtual fabrics bit (word 1 bit 30) when sending the FLOGI
  and FDISC. (CR 124339)
- Return a MLQUEUE_DEVICE_BUSY if the driver detects that an I/O is being
  retried too quickly (CR 124668)
- Remove NDLP reference put in lpfc_cmpl_els_logo_acc for all but fabric
  nodes (CR 123924)
- Only retry FDISCs every second and stop retrying after devloss number
  of retries (CR 13939)
- Check to see if vports are unloading before adding them to the vport
  work array. (CR 124996)
- Fixed illegal state transition during driver unload (CR 124191)
- Added missing protection on setting/clearing of vport->fc_flag bit (CR 126002)
- Set NPIV flag in lpfc_mbx_process_link_up for all ports sli3 and
  above. (CR 126094)
- Clear FCP command bytes that are not used. (CR 126209)
Signed-off-by: NAlex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: NJames Smart <james.smart@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

drivers/scsi/lpfc/lpfc_els.c

@@ -1075,6 +1075,7 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	/* Setup CSPs accordingly for Fabric */
 	sp->cmn.e_d_tov = 0;
 	sp->cmn.w2.r_a_tov = 0;
+	sp->cmn.virtual_fabric_support = 0;
 	sp->cls1.classValid = 0;
 	sp->cls2.seqDelivery = 1;
 	sp->cls3.seqDelivery = 1;
@@ -3066,17 +3067,22 @@ lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 	if (did == FDMI_DID)
 		retry = 1;
 
-	if (((cmd == ELS_CMD_FLOGI) || (cmd == ELS_CMD_FDISC)) &&
+	if ((cmd == ELS_CMD_FLOGI) &&
 	    (phba->fc_topology != LPFC_TOPOLOGY_LOOP) &&
 	    !lpfc_error_lost_link(irsp)) {
 		/* FLOGI retry policy */
 		retry = 1;
-		/* retry forever */
+		/* retry FLOGI forever */
 		maxretry = 0;
 		if (cmdiocb->retry >= 100)
 			delay = 5000;
 		else if (cmdiocb->retry >= 32)
 			delay = 1000;
+	} else if ((cmd == ELS_CMD_FDISC) && !lpfc_error_lost_link(irsp)) {
+		/* retry FDISCs every second up to devloss */
+		retry = 1;
+		maxretry = vport->cfg_devloss_tmo;
+		delay = 1000;
 	}
 
 	cmdiocb->retry++;
@@ -3389,11 +3395,17 @@ lpfc_cmpl_els_logo_acc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 
 	/*
 	 * The driver received a LOGO from the rport and has ACK'd it.
-	 * At this point, the driver is done so release the IOCB and
-	 * remove the ndlp reference.
+	 * At this point, the driver is done so release the IOCB
 	 */
 	lpfc_els_free_iocb(phba, cmdiocb);
-	lpfc_nlp_put(ndlp);
+
+	/*
+	 * Remove the ndlp reference if it's a fabric node that has
+	 * sent us an unsolicted LOGO.
+	 */
+	if (ndlp->nlp_type & NLP_FABRIC)
+		lpfc_nlp_put(ndlp);
+
 	return;
 }
 
@@ -7231,6 +7243,7 @@ lpfc_issue_els_fdisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	/* Setup CSPs accordingly for Fabric */
 	sp->cmn.e_d_tov = 0;
 	sp->cmn.w2.r_a_tov = 0;
+	sp->cmn.virtual_fabric_support = 0;
 	sp->cls1.classValid = 0;
 	sp->cls2.seqDelivery = 1;
 	sp->cls3.seqDelivery = 1;

drivers/scsi/lpfc/lpfc_hbadisc.c

@@ -2646,9 +2646,14 @@ lpfc_init_vfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 {
 	struct lpfc_vport *vport = mboxq->vport;
 
-	/* VFI not supported on interface type 0, just do the flogi */
-	if (mboxq->u.mb.mbxStatus && (bf_get(lpfc_sli_intf_if_type,
-	    &phba->sli4_hba.sli_intf) != LPFC_SLI_INTF_IF_TYPE_0)) {
+	/*
+	 * VFI not supported on interface type 0, just do the flogi
+	 * Also continue if the VFI is in use - just use the same one.
+	 */
+	if (mboxq->u.mb.mbxStatus &&
+	    (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+			LPFC_SLI_INTF_IF_TYPE_0) &&
+	    mboxq->u.mb.mbxStatus != MBX_VFI_IN_USE) {
 		lpfc_printf_vlog(vport, KERN_ERR,
 				LOG_MBOX,
 				"2891 Init VFI mailbox failed 0x%x\n",
@@ -2922,6 +2927,7 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la)
 {
 	struct lpfc_vport *vport = phba->pport;
 	LPFC_MBOXQ_t *sparam_mbox, *cfglink_mbox = NULL;
+	struct Scsi_Host *shost;
 	int i;
 	struct lpfc_dmabuf *mp;
 	int rc;
@@ -2945,6 +2951,7 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la)
 	phba->fc_topology = bf_get(lpfc_mbx_read_top_topology, la);
 	phba->link_flag &= ~LS_NPIV_FAB_SUPPORTED;
 
+	shost = lpfc_shost_from_vport(vport);
 	if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
 		phba->sli3_options &= ~LPFC_SLI3_NPIV_ENABLED;
 
@@ -2956,8 +2963,11 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la)
 				"1309 Link Up Event npiv not supported in loop "
 				"topology\n");
 				/* Get Loop Map information */
-		if (bf_get(lpfc_mbx_read_top_il, la))
+		if (bf_get(lpfc_mbx_read_top_il, la)) {
+			spin_lock_irq(shost->host_lock);
 			vport->fc_flag |= FC_LBIT;
+			spin_unlock_irq(shost->host_lock);
+		}
 
 		vport->fc_myDID = bf_get(lpfc_mbx_read_top_alpa_granted, la);
 		i = la->lilpBde64.tus.f.bdeSize;
@@ -3002,11 +3012,13 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la)
 	} else {
 		if (!(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)) {
 			if (phba->max_vpi && phba->cfg_enable_npiv &&
-			   (phba->sli_rev == 3))
+			   (phba->sli_rev >= LPFC_SLI_REV3))
 				phba->sli3_options |= LPFC_SLI3_NPIV_ENABLED;
 		}
 		vport->fc_myDID = phba->fc_pref_DID;
+		spin_lock_irq(shost->host_lock);
 		vport->fc_flag |= FC_LBIT;
+		spin_unlock_irq(shost->host_lock);
 	}
 	spin_unlock_irq(&phba->hbalock);
 
@@ -3593,6 +3605,7 @@ lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	MAILBOX_t *mb = &pmb->u.mb;
 	struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
 	struct lpfc_nodelist *ndlp;
+	struct Scsi_Host *shost;
 
 	ndlp = (struct lpfc_nodelist *) pmb->context2;
 	pmb->context1 = NULL;
@@ -3638,8 +3651,12 @@ lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 		 * vport discovery */
 		if (!(vport->fc_flag & FC_LOGO_RCVD_DID_CHNG))
 			lpfc_start_fdiscs(phba);
-		else
+		else {
+			shost = lpfc_shost_from_vport(vport);
+			spin_lock_irq(shost->host_lock);
 			vport->fc_flag &= ~FC_LOGO_RCVD_DID_CHNG ;
+			spin_unlock_irq(shost->host_lock);
+		}
 		lpfc_do_scr_ns_plogi(phba, vport);
 	}
 

drivers/scsi/lpfc/lpfc_hw.h

@@ -349,6 +349,12 @@ struct csp {
  * Word 1 Bit 31 in FLOGI response is clean address bit
  */
 #define clean_address_bit request_multiple_Nport /* Word 1, bit 31 */
+/*
+ * Word 1 Bit 30 in common service parameter is overloaded.
+ * Word 1 Bit 30 in FLOGI request is Virtual Fabrics
+ * Word 1 Bit 30 in PLOGI request is random offset
+ */
+#define virtual_fabric_support randomOffset /* Word 1, bit 30 */
 #ifdef __BIG_ENDIAN_BITFIELD
 	uint16_t request_multiple_Nport:1;	/* FC Word 1, bit 31 */
 	uint16_t randomOffset:1;	/* FC Word 1, bit 30 */

drivers/scsi/lpfc/lpfc_hw4.h

@@ -1830,6 +1830,8 @@ struct lpfc_mbx_init_vfi {
 #define lpfc_init_vfi_hop_count_MASK	0x000000FF
 #define lpfc_init_vfi_hop_count_WORD	word4
 };
+#define MBX_VFI_IN_USE			0x9F02
+
 
 struct lpfc_mbx_reg_vfi {
 	uint32_t word1;

drivers/scsi/lpfc/lpfc_nportdisc.c

@@ -782,6 +782,14 @@ lpfc_device_rm_unused_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	return NLP_STE_FREED_NODE;
 }
 
+static uint32_t
+lpfc_device_recov_unused_node(struct lpfc_vport *vport,
+			struct lpfc_nodelist *ndlp,
+			   void *arg, uint32_t evt)
+{
+	return ndlp->nlp_state;
+}
+
 static uint32_t
 lpfc_rcv_plogi_plogi_issue(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 			   void *arg, uint32_t evt)
@@ -2147,7 +2155,7 @@ static uint32_t (*lpfc_disc_action[NLP_STE_MAX_STATE * NLP_EVT_MAX_EVENT])
 	lpfc_disc_illegal,		/* CMPL_ADISC      */
 	lpfc_disc_illegal,		/* CMPL_REG_LOGIN  */
 	lpfc_device_rm_unused_node,	/* DEVICE_RM       */
-	lpfc_disc_illegal,		/* DEVICE_RECOVERY */
+	lpfc_device_recov_unused_node,	/* DEVICE_RECOVERY */
 
 	lpfc_rcv_plogi_plogi_issue,	/* RCV_PLOGI   PLOGI_ISSUE    */
 	lpfc_rcv_prli_plogi_issue,	/* RCV_PRLI        */

drivers/scsi/lpfc/lpfc_scsi.c

@@ -2913,8 +2913,8 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
 	int_to_scsilun(lpfc_cmd->pCmd->device->lun,
 			&lpfc_cmd->fcp_cmnd->fcp_lun);
 
-	memcpy(&fcp_cmnd->fcpCdb[0], scsi_cmnd->cmnd, 16);
-
+	memset(&fcp_cmnd->fcpCdb[0], 0, LPFC_FCP_CDB_LEN);
+	memcpy(&fcp_cmnd->fcpCdb[0], scsi_cmnd->cmnd, scsi_cmnd->cmd_len);
 	if (scsi_populate_tag_msg(scsi_cmnd, tag)) {
 		switch (tag[0]) {
 		case HEAD_OF_QUEUE_TAG:
@@ -3238,6 +3238,15 @@ lpfc_queuecommand_lck(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
 		cmnd->result = err;
 		goto out_fail_command;
 	}
+	/*
+	 * Do not let the mid-layer retry I/O too fast. If an I/O is retried
+	 * without waiting a bit then indicate that the device is busy.
+	 */
+	if (cmnd->retries &&
+	    time_before(jiffies, (cmnd->jiffies_at_alloc +
+				  msecs_to_jiffies(LPFC_RETRY_PAUSE *
+						   cmnd->retries))))
+		return SCSI_MLQUEUE_DEVICE_BUSY;
 	ndlp = rdata->pnode;
 
 	if ((scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) &&

drivers/scsi/lpfc/lpfc_scsi.h

@@ -21,6 +21,7 @@
 #include <asm/byteorder.h>
 
 struct lpfc_hba;
+#define LPFC_FCP_CDB_LEN 16
 
 #define list_remove_head(list, entry, type, member)		\
 	do {							\
@@ -102,7 +103,7 @@ struct fcp_cmnd {
 #define  WRITE_DATA      0x01	/* Bit 0 */
 #define  READ_DATA       0x02	/* Bit 1 */
 
-	uint8_t fcpCdb[16];	/* SRB cdb field is copied here */
+	uint8_t fcpCdb[LPFC_FCP_CDB_LEN]; /* SRB cdb field is copied here */
 	uint32_t fcpDl;		/* Total transfer length */
 
 };
@@ -153,5 +154,5 @@ struct lpfc_scsi_buf {
 
 #define LPFC_SCSI_DMA_EXT_SIZE 264
 #define LPFC_BPL_SIZE          1024
-
+#define LPFC_RETRY_PAUSE       300
 #define MDAC_DIRECT_CMD                  0x22

drivers/scsi/lpfc/lpfc_vport.c

@@ -774,10 +774,10 @@ lpfc_create_vport_work_array(struct lpfc_hba *phba)
 		return NULL;
 	spin_lock_irq(&phba->hbalock);
 	list_for_each_entry(port_iterator, &phba->port_list, listentry) {
+		if (port_iterator->load_flag & FC_UNLOADING)
+			continue;
 		if (!scsi_host_get(lpfc_shost_from_vport(port_iterator))) {
-			if (!(port_iterator->load_flag & FC_UNLOADING))
-				lpfc_printf_vlog(port_iterator, KERN_ERR,
-					 LOG_VPORT,
+			lpfc_printf_vlog(port_iterator, KERN_ERR, LOG_VPORT,
 					 "1801 Create vport work array FAILED: "
 					 "cannot do scsi_host_get\n");
 			continue;