iwlwifi: mvm: Remove overriding calibrations for the 7000 family

This fix removes the override of calibration request values sent
to the FW.
Due to that, the sending of default values to now implemented
calibrations is removed.
Signed-off-by: NDor Shaish <dor.shaish@intel.com>
Reviewed-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

drivers/net/wireless/iwlwifi/mvm/fw.c

@@ -79,17 +79,8 @@
 #define UCODE_VALID_OK	cpu_to_le32(0x1)
 
 /* Default calibration values for WkP - set to INIT image w/o running */
-static const u8 wkp_calib_values_bb_filter[] = { 0xbf, 0x00, 0x5f, 0x00, 0x2f,
-						 0x00, 0x18, 0x00 };
-static const u8 wkp_calib_values_rx_dc[] = { 0x7f, 0x7f, 0x7f, 0x7f, 0x7f,
-					     0x7f, 0x7f, 0x7f };
-static const u8 wkp_calib_values_tx_lo[] = { 0x00, 0x00, 0x00, 0x00 };
-static const u8 wkp_calib_values_tx_iq[] = { 0xff, 0x00, 0xff, 0x00, 0x00,
-					     0x00 };
-static const u8 wkp_calib_values_rx_iq[] = { 0xff, 0x00, 0x00, 0x00 };
 static const u8 wkp_calib_values_rx_iq_skew[] = { 0x00, 0x00, 0x01, 0x00 };
 static const u8 wkp_calib_values_tx_iq_skew[] = { 0x01, 0x00, 0x00, 0x00 };
-static const u8 wkp_calib_values_xtal[] = { 0xd2, 0xd2 };
 
 struct iwl_calib_default_data {
 	u16 size;
@@ -99,12 +90,7 @@ struct iwl_calib_default_data {
 #define CALIB_SIZE_N_DATA(_buf) {.size = sizeof(_buf), .data = &_buf}
 
 static const struct iwl_calib_default_data wkp_calib_default_data[12] = {
-	[5] = CALIB_SIZE_N_DATA(wkp_calib_values_rx_dc),
-	[6] = CALIB_SIZE_N_DATA(wkp_calib_values_bb_filter),
-	[7] = CALIB_SIZE_N_DATA(wkp_calib_values_tx_lo),
-	[8] = CALIB_SIZE_N_DATA(wkp_calib_values_tx_iq),
 	[9] = CALIB_SIZE_N_DATA(wkp_calib_values_tx_iq_skew),
-	[10] = CALIB_SIZE_N_DATA(wkp_calib_values_rx_iq),
 	[11] = CALIB_SIZE_N_DATA(wkp_calib_values_rx_iq_skew),
 };
 
@@ -261,103 +247,6 @@ static int iwl_send_phy_cfg_cmd(struct iwl_mvm *mvm)
 				    sizeof(phy_cfg_cmd), &phy_cfg_cmd);
 }
 
-/* Starting with the new PHY DB implementation - New calibs are enabled */
-/* Value - 0x405e7 */
-#define IWL_CALIB_DEFAULT_FLOW_INIT	(IWL_CALIB_CFG_XTAL_IDX		|\
-					 IWL_CALIB_CFG_TEMPERATURE_IDX	|\
-					 IWL_CALIB_CFG_VOLTAGE_READ_IDX	|\
-					 IWL_CALIB_CFG_DC_IDX		|\
-					 IWL_CALIB_CFG_BB_FILTER_IDX	|\
-					 IWL_CALIB_CFG_LO_LEAKAGE_IDX	|\
-					 IWL_CALIB_CFG_TX_IQ_IDX	|\
-					 IWL_CALIB_CFG_RX_IQ_IDX	|\
-					 IWL_CALIB_CFG_AGC_IDX)
-
-#define IWL_CALIB_DEFAULT_EVENT_INIT	0x0
-
-/* Value 0x41567 */
-#define IWL_CALIB_DEFAULT_FLOW_RUN	(IWL_CALIB_CFG_XTAL_IDX		|\
-					 IWL_CALIB_CFG_TEMPERATURE_IDX	|\
-					 IWL_CALIB_CFG_VOLTAGE_READ_IDX	|\
-					 IWL_CALIB_CFG_BB_FILTER_IDX	|\
-					 IWL_CALIB_CFG_DC_IDX		|\
-					 IWL_CALIB_CFG_TX_IQ_IDX	|\
-					 IWL_CALIB_CFG_RX_IQ_IDX	|\
-					 IWL_CALIB_CFG_SENSITIVITY_IDX	|\
-					 IWL_CALIB_CFG_AGC_IDX)
-
-#define IWL_CALIB_DEFAULT_EVENT_RUN	(IWL_CALIB_CFG_XTAL_IDX		|\
-					 IWL_CALIB_CFG_TEMPERATURE_IDX	|\
-					 IWL_CALIB_CFG_VOLTAGE_READ_IDX	|\
-					 IWL_CALIB_CFG_TX_PWR_IDX	|\
-					 IWL_CALIB_CFG_DC_IDX		|\
-					 IWL_CALIB_CFG_TX_IQ_IDX	|\
-					 IWL_CALIB_CFG_SENSITIVITY_IDX)
-
-/*
- * Sets the calibrations trigger values that will be sent to the FW for runtime
- * and init calibrations.
- * The ones given in the FW TLV are not correct.
- */
-static void iwl_set_default_calib_trigger(struct iwl_mvm *mvm)
-{
-	struct iwl_tlv_calib_ctrl default_calib;
-
-	/*
-	 * WkP FW TLV calib bits are wrong, overwrite them.
-	 * This defines the dynamic calibrations which are implemented in the
-	 * uCode both for init(flow) calculation and event driven calibs.
-	 */
-
-	/* Init Image */
-	default_calib.event_trigger = cpu_to_le32(IWL_CALIB_DEFAULT_EVENT_INIT);
-	default_calib.flow_trigger = cpu_to_le32(IWL_CALIB_DEFAULT_FLOW_INIT);
-
-	if (default_calib.event_trigger !=
-	    mvm->fw->default_calib[IWL_UCODE_INIT].event_trigger)
-		IWL_ERR(mvm,
-			"Updating the event calib for INIT image: 0x%x -> 0x%x\n",
-			mvm->fw->default_calib[IWL_UCODE_INIT].event_trigger,
-			default_calib.event_trigger);
-	if (default_calib.flow_trigger !=
-	    mvm->fw->default_calib[IWL_UCODE_INIT].flow_trigger)
-		IWL_ERR(mvm,
-			"Updating the flow calib for INIT image: 0x%x -> 0x%x\n",
-			mvm->fw->default_calib[IWL_UCODE_INIT].flow_trigger,
-			default_calib.flow_trigger);
-
-	memcpy((void *)&mvm->fw->default_calib[IWL_UCODE_INIT],
-	       &default_calib, sizeof(struct iwl_tlv_calib_ctrl));
-	IWL_ERR(mvm,
-		"Setting uCode init calibrations event 0x%x, trigger 0x%x\n",
-		default_calib.event_trigger,
-		default_calib.flow_trigger);
-
-	/* Run time image */
-	default_calib.event_trigger = cpu_to_le32(IWL_CALIB_DEFAULT_EVENT_RUN);
-	default_calib.flow_trigger = cpu_to_le32(IWL_CALIB_DEFAULT_FLOW_RUN);
-
-	if (default_calib.event_trigger !=
-	    mvm->fw->default_calib[IWL_UCODE_REGULAR].event_trigger)
-		IWL_ERR(mvm,
-			"Updating the event calib for RT image: 0x%x -> 0x%x\n",
-			mvm->fw->default_calib[IWL_UCODE_REGULAR].event_trigger,
-			default_calib.event_trigger);
-	if (default_calib.flow_trigger !=
-	    mvm->fw->default_calib[IWL_UCODE_REGULAR].flow_trigger)
-		IWL_ERR(mvm,
-			"Updating the flow calib for RT image: 0x%x -> 0x%x\n",
-			mvm->fw->default_calib[IWL_UCODE_REGULAR].flow_trigger,
-			default_calib.flow_trigger);
-
-	memcpy((void *)&mvm->fw->default_calib[IWL_UCODE_REGULAR],
-	       &default_calib, sizeof(struct iwl_tlv_calib_ctrl));
-	IWL_ERR(mvm,
-		"Setting uCode runtime calibs event 0x%x, trigger 0x%x\n",
-		default_calib.event_trigger,
-		default_calib.flow_trigger);
-}
-
 static int iwl_set_default_calibrations(struct iwl_mvm *mvm)
 {
 	u8 cmd_raw[16]; /* holds the variable size commands */
@@ -437,9 +326,6 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm)
 	if (ret)
 		goto error;
 
-	/* Override the calibrations from TLV and the const of fw */
-	iwl_set_default_calib_trigger(mvm);
-
 	/* WkP doesn't have all calibrations, need to set default values */
 	if (mvm->cfg->device_family == IWL_DEVICE_FAMILY_7000) {
 		ret = iwl_set_default_calibrations(mvm);