w1: Add subsystem kernel public interface

Like other subsystems we should be able to define slave devices outside
of the w1 directory. To do this we move public facing interface
definitions to include/linux/w1.h and rename the internal definition
file to w1_internal.h.

As w1_family.h and w1_int.h contained almost entirely public
driver interface definitions we simply removed these files and
moved the remaining definitions into w1_internal.h.

With this we can now start to move slave devices out of w1/slaves and
into the subsystem based on the function they implement, again like
other drivers.
Signed-off-by: NAndrew F. Davis <afd@ti.com>
Reviewed-by: NSebastian Reichel <sre@kernel.org>
Acked-by: NEvgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

MAINTAINERS

@@ -13790,6 +13790,7 @@ M:	Evgeniy Polyakov <zbr@ioremap.net>
 S:	Maintained
 F:	Documentation/w1/
 F:	drivers/w1/
+F:	include/linux/w1.h
 
 W83791D HARDWARE MONITORING DRIVER
 M:	Marc Hulsman <m.hulsman@tudelft.nl>

drivers/power/supply/ds2760_battery.c

@@ -28,7 +28,7 @@
 #include <linux/platform_device.h>
 #include <linux/power_supply.h>
 
-#include "../../w1/w1.h"
+#include <linux/w1.h>
 #include "../../w1/slaves/w1_ds2760.h"
 
 struct ds2760_device_info {

drivers/power/supply/ds2780_battery.c

@@ -21,7 +21,7 @@
 #include <linux/power_supply.h>
 #include <linux/idr.h>
 
-#include "../../w1/w1.h"
+#include <linux/w1.h>
 #include "../../w1/slaves/w1_ds2780.h"
 
 /* Current unit measurement in uA for a 1 milli-ohm sense resistor */

drivers/power/supply/ds2781_battery.c

@@ -19,7 +19,7 @@
 #include <linux/power_supply.h>
 #include <linux/idr.h>
 
-#include "../../w1/w1.h"
+#include <linux/w1.h>
 #include "../../w1/slaves/w1_ds2781.h"
 
 /* Current unit measurement in uA for a 1 milli-ohm sense resistor */

drivers/w1/masters/ds1wm.c

@@ -25,8 +25,7 @@
 
 #include <asm/io.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
+#include <linux/w1.h>
 
 
 #define DS1WM_CMD	0x00	/* R/W 4 bits command */

drivers/w1/masters/ds2482.c

@@ -20,8 +20,7 @@
 #include <linux/delay.h>
 #include <asm/delay.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
+#include <linux/w1.h>
 
 /**
  * Allow the active pullup to be disabled, default is enabled.

drivers/w1/masters/ds2490.c

@@ -25,8 +25,7 @@
 #include <linux/usb.h>
 #include <linux/slab.h>
 
-#include "../w1_int.h"
-#include "../w1.h"
+#include <linux/w1.h>
 
 /* USB Standard */
 /* USB Control request vendor type */

drivers/w1/masters/matrox_w1.c

@@ -34,8 +34,7 @@
 #include <linux/pci_ids.h>
 #include <linux/pci.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
+#include <linux/w1.h>
 
 /*
  * Matrox G400 DDC registers.

drivers/w1/masters/mxc_w1.c

@@ -19,8 +19,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
+#include <linux/w1.h>
 
 /*
  * MXC W1 Register offsets

drivers/w1/masters/omap_hdq.c

@@ -19,8 +19,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/of.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
+#include <linux/w1.h>
 
 #define	MOD_NAME	"OMAP_HDQ:"
 

drivers/w1/masters/w1-gpio.c

@@ -20,8 +20,7 @@
 #include <linux/of.h>
 #include <linux/delay.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
+#include <linux/w1.h>
 
 static u8 w1_gpio_set_pullup(void *data, int delay)
 {

drivers/w1/slaves/w1_bq27000.c

@@ -17,9 +17,9 @@
 #include <linux/mutex.h>
 #include <linux/power/bq27xxx_battery.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_FAMILY_BQ27000	0x01
 
 #define HDQ_CMD_READ	(0)
 #define HDQ_CMD_WRITE	(1<<7)

drivers/w1/slaves/w1_ds2405.c

@@ -24,8 +24,9 @@
 #include <linux/string.h>
 #include <linux/types.h>
 
-#include "../w1.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_FAMILY_DS2405	0x05
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Maciej S. Szmigiero <mail@maciej.szmigiero.name>");

drivers/w1/slaves/w1_ds2406.c

@@ -17,9 +17,9 @@
 #include <linux/slab.h>
 #include <linux/crc16.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_FAMILY_DS2406	0x12
 
 #define W1_F12_FUNC_READ_STATUS		   0xAA
 #define W1_F12_FUNC_WRITE_STATUS	   0x55

drivers/w1/slaves/w1_ds2408.c

@@ -15,9 +15,9 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_FAMILY_DS2408	0x29
 
 #define W1_F29_RETRIES		3
 

drivers/w1/slaves/w1_ds2413.c

@@ -16,9 +16,9 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_FAMILY_DS2413	0x3A
 
 #define W1_F3A_RETRIES                     3
 #define W1_F3A_FUNC_PIO_ACCESS_READ        0xF5

drivers/w1/slaves/w1_ds2423.c

@@ -30,9 +30,9 @@
 #include <linux/delay.h>
 #include <linux/crc16.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_COUNTER_DS2423	0x1D
 
 #define CRC16_VALID	0xb001
 #define CRC16_INIT	0

drivers/w1/slaves/w1_ds2431.c

@@ -16,9 +16,9 @@
 #include <linux/types.h>
 #include <linux/delay.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_EEPROM_DS2431	0x2D
 
 #define W1_F2D_EEPROM_SIZE		128
 #define W1_F2D_PAGE_COUNT		4

drivers/w1/slaves/w1_ds2433.c

@@ -22,9 +22,9 @@
 
 #endif
 
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_EEPROM_DS2433	0x23
 
 #define W1_EEPROM_SIZE		512
 #define W1_PAGE_COUNT		16

drivers/w1/slaves/w1_ds2438.c

@@ -13,8 +13,9 @@
 #include <linux/types.h>
 #include <linux/delay.h>
 
-#include "../w1.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_FAMILY_DS2438		0x26
 
 #define W1_DS2438_RETRIES		3
 

drivers/w1/slaves/w1_ds2760.c

@@ -18,11 +18,12 @@
 #include <linux/idr.h>
 #include <linux/gfp.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
 #include "w1_ds2760.h"
 
+#define W1_FAMILY_DS2760	0x30
+
 static int w1_ds2760_io(struct device *dev, char *buf, int addr, size_t count,
 			int io)
 {

drivers/w1/slaves/w1_ds2780.c

@@ -21,11 +21,12 @@
 #include <linux/mutex.h>
 #include <linux/idr.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
 #include "w1_ds2780.h"
 
+#define W1_FAMILY_DS2780	0x32
+
 static int w1_ds2780_do_io(struct device *dev, char *buf, int addr,
 			size_t count, int io)
 {

drivers/w1/slaves/w1_ds2781.c

@@ -18,11 +18,12 @@
 #include <linux/platform_device.h>
 #include <linux/mutex.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
 #include "w1_ds2781.h"
 
+#define W1_FAMILY_DS2781	0x3D
+
 static int w1_ds2781_do_io(struct device *dev, char *buf, int addr,
 			size_t count, int io)
 {

drivers/w1/slaves/w1_ds28e04.c

@@ -20,9 +20,9 @@
 #define CRC16_INIT		0
 #define CRC16_VALID		0xb001
 
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_FAMILY_DS28E04	0x1C
 
 /* Allow the strong pullup to be disabled, but default to enabled.
  * If it was disabled a parasite powered device might not get the required

drivers/w1/slaves/w1_smem.c

@@ -27,9 +27,10 @@
 #include <linux/device.h>
 #include <linux/types.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_FAMILY_SMEM_01	0x01
+#define W1_FAMILY_SMEM_81	0x81
 
 static struct w1_family w1_smem_family_01 = {
 	.fid = W1_FAMILY_SMEM_01,

drivers/w1/slaves/w1_therm.c

@@ -30,9 +30,13 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_THERM_DS18S20	0x10
+#define W1_THERM_DS1822		0x22
+#define W1_THERM_DS18B20	0x28
+#define W1_THERM_DS1825		0x3B
+#define W1_THERM_DS28EA00	0x42
 
 /* Allow the strong pullup to be disabled, but default to enabled.
  * If it was disabled a parasite powered device might not get the require

drivers/w1/w1.c

@@ -28,11 +28,11 @@
 
 #include <linux/atomic.h>
 
-#include "w1.h"
-#include "w1_int.h"
-#include "w1_family.h"
+#include "w1_internal.h"
 #include "w1_netlink.h"
 
+#define W1_FAMILY_DEFAULT	0
+
 static int w1_timeout = 10;
 module_param_named(timeout, w1_timeout, int, 0);
 MODULE_PARM_DESC(timeout, "time in seconds between automatic slave searches");

drivers/w1/w1_family.c

@@ -18,8 +18,7 @@
 #include <linux/delay.h>
 #include <linux/export.h>
 
-#include "w1_family.h"
-#include "w1.h"
+#include "w1_internal.h"
 
 DEFINE_SPINLOCK(w1_flock);
 static LIST_HEAD(w1_families);

drivers/w1/w1_family.h

-/*
- * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __W1_FAMILY_H
-#define __W1_FAMILY_H
-
-#include <linux/types.h>
-#include <linux/device.h>
-#include <linux/atomic.h>
-
-#define W1_FAMILY_DEFAULT	0
-#define W1_FAMILY_BQ27000	0x01
-#define W1_FAMILY_SMEM_01	0x01
-#define W1_FAMILY_SMEM_81	0x81
-#define W1_FAMILY_DS2405	0x05
-#define W1_THERM_DS18S20 	0x10
-#define W1_FAMILY_DS28E04	0x1C
-#define W1_COUNTER_DS2423	0x1D
-#define W1_THERM_DS1822  	0x22
-#define W1_EEPROM_DS2433  	0x23
-#define W1_FAMILY_DS2438	0x26
-#define W1_THERM_DS18B20 	0x28
-#define W1_FAMILY_DS2408	0x29
-#define W1_EEPROM_DS2431	0x2D
-#define W1_FAMILY_DS2760	0x30
-#define W1_FAMILY_DS2780	0x32
-#define W1_FAMILY_DS2413	0x3A
-#define W1_FAMILY_DS2406	0x12
-#define W1_THERM_DS1825		0x3B
-#define W1_FAMILY_DS2781	0x3D
-#define W1_THERM_DS28EA00	0x42
-
-#define MAXNAMELEN		32
-
-struct w1_slave;
-
-/**
- * struct w1_family_ops - operations for a family type
- * @add_slave: add_slave
- * @remove_slave: remove_slave
- * @groups: sysfs group
- */
-struct w1_family_ops
-{
-	int  (* add_slave)(struct w1_slave *);
-	void (* remove_slave)(struct w1_slave *);
-	const struct attribute_group **groups;
-};
-
-/**
- * struct w1_family - reference counted family structure.
- * @family_entry:	family linked list
- * @fid:		8 bit family identifier
- * @fops:		operations for this family
- * @refcnt:		reference counter
- */
-struct w1_family
-{
-	struct list_head	family_entry;
-	u8			fid;
-
-	struct w1_family_ops	*fops;
-
-	atomic_t		refcnt;
-};
-
-extern spinlock_t w1_flock;
-
-void w1_family_put(struct w1_family *);
-void __w1_family_get(struct w1_family *);
-struct w1_family * w1_family_registered(u8);
-void w1_unregister_family(struct w1_family *);
-int w1_register_family(struct w1_family *);
-
-/**
- * module_w1_driver() - Helper macro for registering a 1-Wire families
- * @__w1_family: w1_family struct
- *
- * Helper macro for 1-Wire families which do not do anything special in module
- * init/exit. This eliminates a lot of boilerplate. Each module may only
- * use this macro once, and calling it replaces module_init() and module_exit()
- */
-#define module_w1_family(__w1_family) \
-	module_driver(__w1_family, w1_register_family, \
-			w1_unregister_family)
-
-#endif /* __W1_FAMILY_H */

drivers/w1/w1_int.c

@@ -21,9 +21,8 @@
 #include <linux/export.h>
 #include <linux/moduleparam.h>
 
-#include "w1.h"
+#include "w1_internal.h"
 #include "w1_netlink.h"
-#include "w1_int.h"
 
 static int w1_search_count = -1; /* Default is continual scan */
 module_param_named(search_count, w1_search_count, int, 0);

drivers/w1/w1_int.h

-/*
- * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __W1_INT_H
-#define __W1_INT_H
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-
-#include "w1.h"
-
-int w1_add_master_device(struct w1_bus_master *);
-void w1_remove_master_device(struct w1_bus_master *);
-void __w1_remove_master_device(struct w1_master *);
-
-#endif /* __W1_INT_H */

drivers/w1/w1_internal.h

+/*
+ * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __W1_H
+#define __W1_H
+
+#include <linux/w1.h>
+
+#include <linux/completion.h>
+#include <linux/mutex.h>
+
+#define W1_SLAVE_ACTIVE		0
+#define W1_SLAVE_DETACH		1
+
+/**
+ * struct w1_async_cmd - execute callback from the w1_process kthread
+ * @async_entry: link entry
+ * @cb: callback function, must list_del and destroy this list before
+ * returning
+ *
+ * When inserted into the w1_master async_list, w1_process will execute
+ * the callback.  Embed this into the structure with the command details.
+ */
+struct w1_async_cmd {
+	struct list_head	async_entry;
+	void (*cb)(struct w1_master *dev, struct w1_async_cmd *async_cmd);
+};
+
+int w1_create_master_attributes(struct w1_master *master);
+void w1_destroy_master_attributes(struct w1_master *master);
+void w1_search(struct w1_master *dev, u8 search_type,
+	       w1_slave_found_callback cb);
+void w1_search_devices(struct w1_master *dev, u8 search_type,
+		       w1_slave_found_callback cb);
+/* call w1_unref_slave to release the reference counts w1_search_slave added */
+struct w1_slave *w1_search_slave(struct w1_reg_num *id);
+/*
+ * decrements the reference on sl->master and sl, and cleans up if zero
+ * returns the reference count after it has been decremented
+ */
+int w1_unref_slave(struct w1_slave *sl);
+void w1_slave_found(struct w1_master *dev, u64 rn);
+void w1_search_process_cb(struct w1_master *dev, u8 search_type,
+			  w1_slave_found_callback cb);
+struct w1_slave *w1_slave_search_device(struct w1_master *dev,
+					struct w1_reg_num *rn);
+struct w1_master *w1_search_master_id(u32 id);
+
+/* Disconnect and reconnect devices in the given family.  Used for finding
+ * unclaimed devices after a family has been registered or releasing devices
+ * after a family has been unregistered.  Set attach to 1 when a new family
+ * has just been registered, to 0 when it has been unregistered.
+ */
+void w1_reconnect_slaves(struct w1_family *f, int attach);
+int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn);
+/* 0 success, otherwise EBUSY */
+int w1_slave_detach(struct w1_slave *sl);
+
+void __w1_remove_master_device(struct w1_master *dev);
+
+void w1_family_put(struct w1_family *f);
+void __w1_family_get(struct w1_family *f);
+struct w1_family *w1_family_registered(u8 fid);
+
+extern struct device_driver w1_master_driver;
+extern struct device w1_master_device;
+extern int w1_max_slave_count;
+extern int w1_max_slave_ttl;
+extern struct list_head w1_masters;
+extern struct mutex w1_mlock;
+extern spinlock_t w1_flock;
+
+int w1_process_callbacks(struct w1_master *dev);
+int w1_process(void *data);
+
+#endif /* __W1_H */

drivers/w1/w1_io.c

@@ -18,7 +18,7 @@
 #include <linux/moduleparam.h>
 #include <linux/module.h>
 
-#include "w1.h"
+#include "w1_internal.h"
 
 static int w1_delay_parm = 1;
 module_param_named(delay_coef, w1_delay_parm, int, 0);

drivers/w1/w1_netlink.c

@@ -17,7 +17,7 @@
 #include <linux/netlink.h>
 #include <linux/connector.h>
 
-#include "w1.h"
+#include "w1_internal.h"
 #include "w1_netlink.h"
 
 #if defined(CONFIG_W1_CON) && (defined(CONFIG_CONNECTOR) || (defined(CONFIG_CONNECTOR_MODULE) && defined(CONFIG_W1_MODULE)))

drivers/w1/w1_netlink.h

@@ -18,7 +18,7 @@
 #include <asm/types.h>
 #include <linux/connector.h>
 
-#include "w1.h"
+#include "w1_internal.h"
 
 /**
  * enum w1_cn_msg_flags - bitfield flags for struct cn_msg.flags

drivers/w1/w1.h → include/linux/w1.h

@@ -12,8 +12,10 @@
  * GNU General Public License for more details.
  */
 
-#ifndef __W1_H
-#define __W1_H
+#ifndef __LINUX_W1_H
+#define __LINUX_W1_H
+
+#include <linux/device.h>
 
 /**
  * struct w1_reg_num - broken out slave device id
@@ -22,8 +24,7 @@
  * @id: along with family is the unique device id
  * @crc: checksum of the other bytes
  */
-struct w1_reg_num
-{
+struct w1_reg_num {
 #if defined(__LITTLE_ENDIAN_BITFIELD)
 	__u64	family:8,
 		id:48,
@@ -39,12 +40,6 @@ struct w1_reg_num
 
 #ifdef __KERNEL__
 
-#include <linux/completion.h>
-#include <linux/device.h>
-#include <linux/mutex.h>
-
-#include "w1_family.h"
-
 #define W1_MAXNAMELEN		32
 
 #define W1_SEARCH		0xF0
@@ -59,9 +54,6 @@ struct w1_reg_num
 #define W1_MATCH_ROM		0x55
 #define W1_RESUME_CMD		0xA5
 
-#define W1_SLAVE_ACTIVE		0
-#define W1_SLAVE_DETACH		1
-
 /**
  * struct w1_slave - holds a single slave device on the bus
  *
@@ -78,8 +70,7 @@ struct w1_reg_num
  * @dev: kernel device identifier
  *
  */
-struct w1_slave
-{
+struct w1_slave {
 	struct module		*owner;
 	unsigned char		name[W1_MAXNAMELEN];
 	struct list_head	w1_slave_entry;
@@ -96,7 +87,6 @@ struct w1_slave
 
 typedef void (*w1_slave_found_callback)(struct w1_master *, u64);
 
-
 /**
  * struct w1_bus_master - operations available on a bus master
  *
@@ -142,8 +132,7 @@ typedef void (*w1_slave_found_callback)(struct w1_master *, u64);
  * reset_bus.
  *
  */
-struct w1_bus_master
-{
+struct w1_bus_master {
 	void		*data;
 
 	u8		(*read_bit)(void *);
@@ -209,8 +198,7 @@ enum w1_master_flags {
  * @bus_master:		io operations available
  * @seq:		sequence number used for netlink broadcasts
  */
-struct w1_master
-{
+struct w1_master {
 	struct list_head	w1_master_entry;
 	struct module		*owner;
 	unsigned char		name[W1_MAXNAMELEN];
@@ -254,45 +242,51 @@ struct w1_master
 	u32			seq;
 };
 
+int w1_add_master_device(struct w1_bus_master *master);
+void w1_remove_master_device(struct w1_bus_master *master);
+
 /**
- * struct w1_async_cmd - execute callback from the w1_process kthread
- * @async_entry: link entry
- * @cb: callback function, must list_del and destroy this list before
- * returning
- *
- * When inserted into the w1_master async_list, w1_process will execute
- * the callback.  Embed this into the structure with the command details.
+ * struct w1_family_ops - operations for a family type
+ * @add_slave: add_slave
+ * @remove_slave: remove_slave
+ * @groups: sysfs group
  */
-struct w1_async_cmd {
-	struct list_head	async_entry;
-	void (*cb)(struct w1_master *dev, struct w1_async_cmd *async_cmd);
+struct w1_family_ops {
+	int  (*add_slave)(struct w1_slave *sl);
+	void (*remove_slave)(struct w1_slave *sl);
+	const struct attribute_group **groups;
 };
 
-int w1_create_master_attributes(struct w1_master *);
-void w1_destroy_master_attributes(struct w1_master *master);
-void w1_search(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb);
-void w1_search_devices(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb);
-/* call w1_unref_slave to release the reference counts w1_search_slave added */
-struct w1_slave *w1_search_slave(struct w1_reg_num *id);
-/* decrements the reference on sl->master and sl, and cleans up if zero
- * returns the reference count after it has been decremented */
-int w1_unref_slave(struct w1_slave *sl);
-void w1_slave_found(struct w1_master *dev, u64 rn);
-void w1_search_process_cb(struct w1_master *dev, u8 search_type,
-	w1_slave_found_callback cb);
-struct w1_slave *w1_slave_search_device(struct w1_master *dev,
-	struct w1_reg_num *rn);
-struct w1_master *w1_search_master_id(u32 id);
-
-/* Disconnect and reconnect devices in the given family.  Used for finding
- * unclaimed devices after a family has been registered or releasing devices
- * after a family has been unregistered.  Set attach to 1 when a new family
- * has just been registered, to 0 when it has been unregistered.
+/**
+ * struct w1_family - reference counted family structure.
+ * @family_entry:	family linked list
+ * @fid:		8 bit family identifier
+ * @fops:		operations for this family
+ * @refcnt:		reference counter
+ */
+struct w1_family {
+	struct list_head	family_entry;
+	u8			fid;
+
+	struct w1_family_ops	*fops;
+
+	atomic_t		refcnt;
+};
+
+int w1_register_family(struct w1_family *family);
+void w1_unregister_family(struct w1_family *family);
+
+/**
+ * module_w1_driver() - Helper macro for registering a 1-Wire families
+ * @__w1_family: w1_family struct
+ *
+ * Helper macro for 1-Wire families which do not do anything special in module
+ * init/exit. This eliminates a lot of boilerplate. Each module may only
+ * use this macro once, and calling it replaces module_init() and module_exit()
  */
-void w1_reconnect_slaves(struct w1_family *f, int attach);
-int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn);
-/* 0 success, otherwise EBUSY */
-int w1_slave_detach(struct w1_slave *sl);
+#define module_w1_family(__w1_family) \
+	module_driver(__w1_family, w1_register_family, \
+			w1_unregister_family)
 
 u8 w1_triplet(struct w1_master *dev, int bdir);
 void w1_write_8(struct w1_master *, u8);
@@ -321,16 +315,6 @@ static inline struct w1_master* dev_to_w1_master(struct device *dev)
 	return container_of(dev, struct w1_master, dev);
 }
 
-extern struct device_driver w1_master_driver;
-extern struct device w1_master_device;
-extern int w1_max_slave_count;
-extern int w1_max_slave_ttl;
-extern struct list_head w1_masters;
-extern struct mutex w1_mlock;
-
-extern int w1_process_callbacks(struct w1_master *dev);
-extern int w1_process(void *);
-
 #endif /* __KERNEL__ */
 
-#endif /* __W1_H */
+#endif /* __LINUX_W1_H */