ARM: at91: use __iomem pointers for MMIO

ARM is moving to stricter checks on readl/write functions,
so we need to use the correct types everywhere.
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

arch/arm/mach-at91/at91x40.c

@@ -47,7 +47,7 @@ static void at91x40_idle(void)
 	 * Disable the processor clock.  The processor will be automatically
 	 * re-enabled by an interrupt or by a reset.
 	 */
-	__raw_writel(AT91_PS_CR_CPU, AT91_PS_CR);
+	__raw_writel(AT91_PS_CR_CPU, AT91_IO_P2V(AT91_PS_CR));
 	cpu_do_idle();
 }
 

arch/arm/mach-at91/at91x40_time.c

@@ -29,10 +29,10 @@
 #include <mach/at91_tc.h>
 
 #define at91_tc_read(field) \
-	__raw_readl(AT91_TC + field)
+	__raw_readl(AT91_IO_P2V(AT91_TC) + field)
 
 #define at91_tc_write(field, value) \
-	__raw_writel(value, AT91_TC + field);
+	__raw_writel(value, AT91_IO_P2V(AT91_TC) + field);
 
 /*
  *	3 counter/timer units present.

arch/arm/mach-at91/include/mach/hardware.h

@@ -67,13 +67,13 @@
  * to 0xFEF78000 .. 0xFF000000.  (544Kb)
  */
 #define AT91_IO_PHYS_BASE	0xFFF78000
-#define AT91_IO_VIRT_BASE	(0xFF000000 - AT91_IO_SIZE)
+#define AT91_IO_VIRT_BASE	IOMEM(0xFF000000 - AT91_IO_SIZE)
 #else
 /*
  * Identity mapping for the non MMU case.
  */
 #define AT91_IO_PHYS_BASE	AT91_BASE_SYS
-#define AT91_IO_VIRT_BASE	AT91_IO_PHYS_BASE
+#define AT91_IO_VIRT_BASE	IOMEM(AT91_IO_PHYS_BASE)
 #endif
 
 #define AT91_IO_SIZE		(0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)

arch/arm/mach-at91/include/mach/uncompress.h

@@ -94,7 +94,7 @@ static const u32 uarts_sam9x5[] = {
 	0,
 };
 
-static inline const u32* decomp_soc_detect(u32 dbgu_base)
+static inline const u32* decomp_soc_detect(void __iomem *dbgu_base)
 {
 	u32 cidr, socid;
 
@@ -142,10 +142,10 @@ static inline void arch_decomp_setup(void)
 	int i = 0;
 	const u32* usarts;
 
-	usarts = decomp_soc_detect(AT91_BASE_DBGU0);
+	usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU0);
 
 	if (!usarts)
-		usarts = decomp_soc_detect(AT91_BASE_DBGU1);
+		usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU1);
 	if (!usarts) {
 		at91_uart = NULL;
 		return;

arch/arm/mach-at91/setup.c

@@ -73,7 +73,7 @@ void __init at91_init_sram(int bank, unsigned long base, unsigned int length)
 {
 	struct map_desc *desc = &sram_desc[bank];
 
-	desc->virtual = AT91_IO_VIRT_BASE - length;
+	desc->virtual = (unsigned long)AT91_IO_VIRT_BASE - length;
 	if (bank > 0)
 		desc->virtual -= sram_desc[bank - 1].length;
 
@@ -88,7 +88,7 @@ void __init at91_init_sram(int bank, unsigned long base, unsigned int length)
 }
 
 static struct map_desc at91_io_desc __initdata = {
-	.virtual	= AT91_VA_BASE_SYS,
+	.virtual	= (unsigned long)AT91_VA_BASE_SYS,
 	.pfn		= __phys_to_pfn(AT91_BASE_SYS),
 	.length		= SZ_16K,
 	.type		= MT_DEVICE,