drm/i915: Pass pipe_config to fdi_link_train() functions

It is preferred to pass pipe_config to functions instead of accessing
crtc->config directly. Follow suit and pass pipe_config to the fdi link
train functions.

v2: Add const; s/pipe_config/crtc_state/ (Ville)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302125857.14665-5-ander.conselvan.de.oliveira@intel.com
上级 2ce42273
......@@ -669,7 +669,8 @@ struct drm_i915_display_funcs {
struct intel_encoder *encoder,
const struct drm_display_mode *adjusted_mode);
void (*audio_codec_disable)(struct intel_encoder *encoder);
void (*fdi_link_train)(struct intel_crtc *crtc);
void (*fdi_link_train)(struct intel_crtc *crtc,
const struct intel_crtc_state *crtc_state);
void (*init_clock_gating)(struct drm_i915_private *dev_priv);
int (*queue_flip)(struct drm_device *dev, struct drm_crtc *crtc,
struct drm_framebuffer *fb,
......
......@@ -674,7 +674,8 @@ static uint32_t hsw_pll_to_ddi_pll_sel(struct intel_shared_dpll *pll)
* DDI A (which is used for eDP)
*/
void hsw_fdi_link_train(struct intel_crtc *crtc)
void hsw_fdi_link_train(struct intel_crtc *crtc,
const struct intel_crtc_state *crtc_state)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
......@@ -700,7 +701,7 @@ void hsw_fdi_link_train(struct intel_crtc *crtc)
/* Enable the PCH Receiver FDI PLL */
rx_ctl_val = dev_priv->fdi_rx_config | FDI_RX_ENHANCE_FRAME_ENABLE |
FDI_RX_PLL_ENABLE |
FDI_DP_PORT_WIDTH(crtc->config->fdi_lanes);
FDI_DP_PORT_WIDTH(crtc_state->fdi_lanes);
I915_WRITE(FDI_RX_CTL(PIPE_A), rx_ctl_val);
POSTING_READ(FDI_RX_CTL(PIPE_A));
udelay(220);
......@@ -710,7 +711,7 @@ void hsw_fdi_link_train(struct intel_crtc *crtc)
I915_WRITE(FDI_RX_CTL(PIPE_A), rx_ctl_val);
/* Configure Port Clock Select */
ddi_pll_sel = hsw_pll_to_ddi_pll_sel(crtc->config->shared_dpll);
ddi_pll_sel = hsw_pll_to_ddi_pll_sel(crtc_state->shared_dpll);
I915_WRITE(PORT_CLK_SEL(PORT_E), ddi_pll_sel);
WARN_ON(ddi_pll_sel != PORT_CLK_SEL_SPLL);
......@@ -730,7 +731,7 @@ void hsw_fdi_link_train(struct intel_crtc *crtc)
* port reversal bit */
I915_WRITE(DDI_BUF_CTL(PORT_E),
DDI_BUF_CTL_ENABLE |
((crtc->config->fdi_lanes - 1) << 1) |
((crtc_state->fdi_lanes - 1) << 1) |
DDI_BUF_TRANS_SELECT(i / 2));
POSTING_READ(DDI_BUF_CTL(PORT_E));
......
......@@ -3688,7 +3688,8 @@ static void intel_fdi_normal_train(struct intel_crtc *crtc)
}
/* The FDI link training functions for ILK/Ibexpeak. */
static void ironlake_fdi_link_train(struct intel_crtc *crtc)
static void ironlake_fdi_link_train(struct intel_crtc *crtc,
const struct intel_crtc_state *crtc_state)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
......@@ -3713,7 +3714,7 @@ static void ironlake_fdi_link_train(struct intel_crtc *crtc)
reg = FDI_TX_CTL(pipe);
temp = I915_READ(reg);
temp &= ~FDI_DP_PORT_WIDTH_MASK;
temp |= FDI_DP_PORT_WIDTH(crtc->config->fdi_lanes);
temp |= FDI_DP_PORT_WIDTH(crtc_state->fdi_lanes);
temp &= ~FDI_LINK_TRAIN_NONE;
temp |= FDI_LINK_TRAIN_PATTERN_1;
I915_WRITE(reg, temp | FDI_TX_ENABLE);
......@@ -3788,7 +3789,8 @@ static const int snb_b_fdi_train_param[] = {
};
/* The FDI link training functions for SNB/Cougarpoint. */
static void gen6_fdi_link_train(struct intel_crtc *crtc)
static void gen6_fdi_link_train(struct intel_crtc *crtc,
const struct intel_crtc_state *crtc_state)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
......@@ -3811,7 +3813,7 @@ static void gen6_fdi_link_train(struct intel_crtc *crtc)
reg = FDI_TX_CTL(pipe);
temp = I915_READ(reg);
temp &= ~FDI_DP_PORT_WIDTH_MASK;
temp |= FDI_DP_PORT_WIDTH(crtc->config->fdi_lanes);
temp |= FDI_DP_PORT_WIDTH(crtc_state->fdi_lanes);
temp &= ~FDI_LINK_TRAIN_NONE;
temp |= FDI_LINK_TRAIN_PATTERN_1;
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
......@@ -3920,7 +3922,8 @@ static void gen6_fdi_link_train(struct intel_crtc *crtc)
}
/* Manual link training for Ivy Bridge A0 parts */
static void ivb_manual_fdi_link_train(struct intel_crtc *crtc)
static void ivb_manual_fdi_link_train(struct intel_crtc *crtc,
const struct intel_crtc_state *crtc_state)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
......@@ -3962,7 +3965,7 @@ static void ivb_manual_fdi_link_train(struct intel_crtc *crtc)
reg = FDI_TX_CTL(pipe);
temp = I915_READ(reg);
temp &= ~FDI_DP_PORT_WIDTH_MASK;
temp |= FDI_DP_PORT_WIDTH(crtc->config->fdi_lanes);
temp |= FDI_DP_PORT_WIDTH(crtc_state->fdi_lanes);
temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
temp |= snb_b_fdi_train_param[j/2];
......@@ -4474,7 +4477,7 @@ static void ironlake_pch_enable(const struct intel_crtc_state *crtc_state)
I915_READ(PIPE_DATA_M1(pipe)) & TU_SIZE_MASK);
/* For PCH output, training FDI link */
dev_priv->display.fdi_link_train(crtc);
dev_priv->display.fdi_link_train(crtc, crtc_state);
/* We need to program the right clock selection before writing the pixel
* mutliplier into the DPLL. */
......@@ -5366,7 +5369,7 @@ static void haswell_crtc_enable(struct intel_crtc_state *pipe_config,
intel_encoders_pre_enable(crtc, pipe_config, old_state);
if (intel_crtc->config->has_pch_encoder)
dev_priv->display.fdi_link_train(intel_crtc);
dev_priv->display.fdi_link_train(intel_crtc, pipe_config);
if (!transcoder_is_dsi(cpu_transcoder))
intel_ddi_enable_pipe_clock(intel_crtc);
......
......@@ -1225,7 +1225,8 @@ void intel_ddi_fdi_post_disable(struct intel_encoder *intel_encoder,
struct intel_crtc_state *old_crtc_state,
struct drm_connector_state *old_conn_state);
void intel_prepare_dp_ddi_buffers(struct intel_encoder *encoder);
void hsw_fdi_link_train(struct intel_crtc *crtc);
void hsw_fdi_link_train(struct intel_crtc *crtc,
const struct intel_crtc_state *crtc_state);
void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port);
enum port intel_ddi_get_encoder_port(struct intel_encoder *intel_encoder);
bool intel_ddi_get_hw_state(struct intel_encoder *encoder, enum pipe *pipe);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册