Merge branch 'for-usb-next' of...

Merge branch 'for-usb-next' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-next

* 'for-usb-next' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/sarah/xhci:
  xhci 1.0: Set transfer burst last packet count field.
  xhci 1.0: Set transfer burst count field.
  xhci 1.0: Update TD size field format.
  xhci 1.0: Only interrupt on short packet for IN EPs.
  xhci: Remove sparse warning about cmd_status.
  usbcore: warm reset USB3 port in SS.Inactive state
  usbcore: Refine USB3.0 device suspend and resume
  xHCI: report USB3.0 portstatus comply with USB3.0 specification
  xHCI: Set link state support
  xHCI: Clear link state change support
  xHCI: warm reset support
  usb/ch9: use proper endianess for wBytesPerInterval
  xhci: Remove recursive call to xhci_handle_event
  xhci: Add an assertion to check for virt_dev=0 bug.
  xhci: Add rmb() between reading event validity & event data access.
  xhci: Make xHCI driver endian-safe

drivers/usb/core/config.c

@@ -129,7 +129,7 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
 		max_tx = ep->desc.wMaxPacketSize * (desc->bMaxBurst + 1);
 	else
 		max_tx = 999999;
-	if (desc->wBytesPerInterval > max_tx) {
+	if (le16_to_cpu(desc->wBytesPerInterval) > max_tx) {
 		dev_warn(ddev, "%s endpoint with wBytesPerInterval of %d in "
 				"config %d interface %d altsetting %d ep %d: "
 				"setting to %d\n",

drivers/usb/core/hub.c

@@ -379,15 +379,6 @@ static int hub_port_status(struct usb_hub *hub, int port1,
 		*status = le16_to_cpu(hub->status->port.wPortStatus);
 		*change = le16_to_cpu(hub->status->port.wPortChange);
 
-		if ((hub->hdev->parent != NULL) &&
-				hub_is_superspeed(hub->hdev)) {
-			/* Translate the USB 3 port status */
-			u16 tmp = *status & USB_SS_PORT_STAT_MASK;
-			if (*status & USB_SS_PORT_STAT_POWER)
-				tmp |= USB_PORT_STAT_POWER;
-			*status = tmp;
-		}
-
 		ret = 0;
 	}
 	mutex_unlock(&hub->status_mutex);
@@ -2160,11 +2151,76 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
 	return status;
 }
 
+/* Warm reset a USB3 protocol port */
+static int hub_port_warm_reset(struct usb_hub *hub, int port)
+{
+	int ret;
+	u16 portstatus, portchange;
+
+	if (!hub_is_superspeed(hub->hdev)) {
+		dev_err(hub->intfdev, "only USB3 hub support warm reset\n");
+		return -EINVAL;
+	}
+
+	/* Warm reset the port */
+	ret = set_port_feature(hub->hdev,
+				port, USB_PORT_FEAT_BH_PORT_RESET);
+	if (ret) {
+		dev_err(hub->intfdev, "cannot warm reset port %d\n", port);
+		return ret;
+	}
+
+	msleep(20);
+	ret = hub_port_status(hub, port, &portstatus, &portchange);
+
+	if (portchange & USB_PORT_STAT_C_RESET)
+		clear_port_feature(hub->hdev, port, USB_PORT_FEAT_C_RESET);
+
+	if (portchange & USB_PORT_STAT_C_BH_RESET)
+		clear_port_feature(hub->hdev, port,
+					USB_PORT_FEAT_C_BH_PORT_RESET);
+
+	if (portchange & USB_PORT_STAT_C_LINK_STATE)
+		clear_port_feature(hub->hdev, port,
+					USB_PORT_FEAT_C_PORT_LINK_STATE);
+
+	return ret;
+}
+
+/* Check if a port is power on */
+static int port_is_power_on(struct usb_hub *hub, unsigned portstatus)
+{
+	int ret = 0;
+
+	if (hub_is_superspeed(hub->hdev)) {
+		if (portstatus & USB_SS_PORT_STAT_POWER)
+			ret = 1;
+	} else {
+		if (portstatus & USB_PORT_STAT_POWER)
+			ret = 1;
+	}
+
+	return ret;
+}
+
 #ifdef	CONFIG_PM
 
-#define MASK_BITS	(USB_PORT_STAT_POWER | USB_PORT_STAT_CONNECTION | \
-				USB_PORT_STAT_SUSPEND)
-#define WANT_BITS	(USB_PORT_STAT_POWER | USB_PORT_STAT_CONNECTION)
+/* Check if a port is suspended(USB2.0 port) or in U3 state(USB3.0 port) */
+static int port_is_suspended(struct usb_hub *hub, unsigned portstatus)
+{
+	int ret = 0;
+
+	if (hub_is_superspeed(hub->hdev)) {
+		if ((portstatus & USB_PORT_STAT_LINK_STATE)
+				== USB_SS_PORT_LS_U3)
+			ret = 1;
+	} else {
+		if (portstatus & USB_PORT_STAT_SUSPEND)
+			ret = 1;
+	}
+
+	return ret;
+}
 
 /* Determine whether the device on a port is ready for a normal resume,
  * is ready for a reset-resume, or should be disconnected.
@@ -2174,7 +2230,9 @@ static int check_port_resume_type(struct usb_device *udev,
 		int status, unsigned portchange, unsigned portstatus)
 {
 	/* Is the device still present? */
-	if (status || (portstatus & MASK_BITS) != WANT_BITS) {
+	if (status || port_is_suspended(hub, portstatus) ||
+			!port_is_power_on(hub, portstatus) ||
+			!(portstatus & USB_PORT_STAT_CONNECTION)) {
 		if (status >= 0)
 			status = -ENODEV;
 	}
@@ -2285,14 +2343,10 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
 	}
 
 	/* see 7.1.7.6 */
-	/* Clear PORT_POWER if it's a USB3.0 device connected to USB 3.0
-	 * external hub.
-	 * FIXME: this is a temporary workaround to make the system able
-	 * to suspend/resume.
-	 */
-	if ((hub->hdev->parent != NULL) && hub_is_superspeed(hub->hdev))
-		status = clear_port_feature(hub->hdev, port1,
-						USB_PORT_FEAT_POWER);
+	if (hub_is_superspeed(hub->hdev))
+		status = set_port_feature(hub->hdev,
+				port1 | (USB_SS_PORT_LS_U3 << 3),
+				USB_PORT_FEAT_LINK_STATE);
 	else
 		status = set_port_feature(hub->hdev, port1,
 						USB_PORT_FEAT_SUSPEND);
@@ -2439,7 +2493,7 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 
 	/* Skip the initial Clear-Suspend step for a remote wakeup */
 	status = hub_port_status(hub, port1, &portstatus, &portchange);
-	if (status == 0 && !(portstatus & USB_PORT_STAT_SUSPEND))
+	if (status == 0 && !port_is_suspended(hub, portstatus))
 		goto SuspendCleared;
 
 	// dev_dbg(hub->intfdev, "resume port %d\n", port1);
@@ -2447,8 +2501,13 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 	set_bit(port1, hub->busy_bits);
 
 	/* see 7.1.7.7; affects power usage, but not budgeting */
-	status = clear_port_feature(hub->hdev,
-			port1, USB_PORT_FEAT_SUSPEND);
+	if (hub_is_superspeed(hub->hdev))
+		status = set_port_feature(hub->hdev,
+				port1 | (USB_SS_PORT_LS_U0 << 3),
+				USB_PORT_FEAT_LINK_STATE);
+	else
+		status = clear_port_feature(hub->hdev,
+				port1, USB_PORT_FEAT_SUSPEND);
 	if (status) {
 		dev_dbg(hub->intfdev, "can't resume port %d, status %d\n",
 				port1, status);
@@ -2470,9 +2529,15 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 
  SuspendCleared:
 	if (status == 0) {
-		if (portchange & USB_PORT_STAT_C_SUSPEND)
-			clear_port_feature(hub->hdev, port1,
-					USB_PORT_FEAT_C_SUSPEND);
+		if (hub_is_superspeed(hub->hdev)) {
+			if (portchange & USB_PORT_STAT_C_LINK_STATE)
+				clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_PORT_LINK_STATE);
+		} else {
+			if (portchange & USB_PORT_STAT_C_SUSPEND)
+				clear_port_feature(hub->hdev, port1,
+						USB_PORT_FEAT_C_SUSPEND);
+		}
 	}
 
 	clear_bit(port1, hub->busy_bits);
@@ -3147,7 +3212,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 
 		/* maybe switch power back on (e.g. root hub was reset) */
 		if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2
-				&& !(portstatus & USB_PORT_STAT_POWER))
+				&& !port_is_power_on(hub, portstatus))
 			set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
 
 		if (portstatus & USB_PORT_STAT_ENABLE)
@@ -3490,6 +3555,16 @@ static void hub_events(void)
 						USB_PORT_FEAT_C_PORT_CONFIG_ERROR);
 			}
 
+			/* Warm reset a USB3 protocol port if it's in
+			 * SS.Inactive state.
+			 */
+			if (hub_is_superspeed(hub->hdev) &&
+				(portstatus & USB_PORT_STAT_LINK_STATE)
+					== USB_SS_PORT_LS_SS_INACTIVE) {
+				dev_dbg(hub_dev, "warm reset port %d\n", i);
+				hub_port_warm_reset(hub, i);
+			}
+
 			if (connect_change)
 				hub_port_connect_change(hub, i,
 						portstatus, portchange);

drivers/usb/host/xhci-dbg.c

@@ -147,7 +147,7 @@ static void xhci_print_op_regs(struct xhci_hcd *xhci)
 
 static void xhci_print_ports(struct xhci_hcd *xhci)
 {
-	u32 __iomem *addr;
+	__le32 __iomem *addr;
 	int i, j;
 	int ports;
 	char *names[NUM_PORT_REGS] = {
@@ -253,27 +253,27 @@ void xhci_print_trb_offsets(struct xhci_hcd *xhci, union xhci_trb *trb)
 void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb)
 {
 	u64	address;
-	u32	type = xhci_readl(xhci, &trb->link.control) & TRB_TYPE_BITMASK;
+	u32	type = le32_to_cpu(trb->link.control) & TRB_TYPE_BITMASK;
 
 	switch (type) {
 	case TRB_TYPE(TRB_LINK):
 		xhci_dbg(xhci, "Link TRB:\n");
 		xhci_print_trb_offsets(xhci, trb);
 
-		address = trb->link.segment_ptr;
+		address = le64_to_cpu(trb->link.segment_ptr);
 		xhci_dbg(xhci, "Next ring segment DMA address = 0x%llx\n", address);
 
 		xhci_dbg(xhci, "Interrupter target = 0x%x\n",
-				GET_INTR_TARGET(trb->link.intr_target));
+			 GET_INTR_TARGET(le32_to_cpu(trb->link.intr_target)));
 		xhci_dbg(xhci, "Cycle bit = %u\n",
-				(unsigned int) (trb->link.control & TRB_CYCLE));
+			 (unsigned int) (le32_to_cpu(trb->link.control) & TRB_CYCLE));
 		xhci_dbg(xhci, "Toggle cycle bit = %u\n",
-				(unsigned int) (trb->link.control & LINK_TOGGLE));
+			 (unsigned int) (le32_to_cpu(trb->link.control) & LINK_TOGGLE));
 		xhci_dbg(xhci, "No Snoop bit = %u\n",
-				(unsigned int) (trb->link.control & TRB_NO_SNOOP));
+			 (unsigned int) (le32_to_cpu(trb->link.control) & TRB_NO_SNOOP));
 		break;
 	case TRB_TYPE(TRB_TRANSFER):
-		address = trb->trans_event.buffer;
+		address = le64_to_cpu(trb->trans_event.buffer);
 		/*
 		 * FIXME: look at flags to figure out if it's an address or if
 		 * the data is directly in the buffer field.
@@ -281,11 +281,12 @@ void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb)
 		xhci_dbg(xhci, "DMA address or buffer contents= %llu\n", address);
 		break;
 	case TRB_TYPE(TRB_COMPLETION):
-		address = trb->event_cmd.cmd_trb;
+		address = le64_to_cpu(trb->event_cmd.cmd_trb);
 		xhci_dbg(xhci, "Command TRB pointer = %llu\n", address);
 		xhci_dbg(xhci, "Completion status = %u\n",
-				(unsigned int) GET_COMP_CODE(trb->event_cmd.status));
-		xhci_dbg(xhci, "Flags = 0x%x\n", (unsigned int) trb->event_cmd.flags);
+			 (unsigned int) GET_COMP_CODE(le32_to_cpu(trb->event_cmd.status)));
+		xhci_dbg(xhci, "Flags = 0x%x\n",
+			 (unsigned int) le32_to_cpu(trb->event_cmd.flags));
 		break;
 	default:
 		xhci_dbg(xhci, "Unknown TRB with TRB type ID %u\n",
@@ -311,16 +312,16 @@ void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb)
 void xhci_debug_segment(struct xhci_hcd *xhci, struct xhci_segment *seg)
 {
 	int i;
-	u32 addr = (u32) seg->dma;
+	u64 addr = seg->dma;
 	union xhci_trb *trb = seg->trbs;
 
 	for (i = 0; i < TRBS_PER_SEGMENT; ++i) {
 		trb = &seg->trbs[i];
-		xhci_dbg(xhci, "@%08x %08x %08x %08x %08x\n", addr,
-				lower_32_bits(trb->link.segment_ptr),
-				upper_32_bits(trb->link.segment_ptr),
-				(unsigned int) trb->link.intr_target,
-				(unsigned int) trb->link.control);
+		xhci_dbg(xhci, "@%016llx %08x %08x %08x %08x\n", addr,
+			 (u32)lower_32_bits(le64_to_cpu(trb->link.segment_ptr)),
+			 (u32)upper_32_bits(le64_to_cpu(trb->link.segment_ptr)),
+			 (unsigned int) le32_to_cpu(trb->link.intr_target),
+			 (unsigned int) le32_to_cpu(trb->link.control));
 		addr += sizeof(*trb);
 	}
 }
@@ -391,18 +392,18 @@ void xhci_dbg_ep_rings(struct xhci_hcd *xhci,
 
 void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst)
 {
-	u32 addr = (u32) erst->erst_dma_addr;
+	u64 addr = erst->erst_dma_addr;
 	int i;
 	struct xhci_erst_entry *entry;
 
 	for (i = 0; i < erst->num_entries; ++i) {
 		entry = &erst->entries[i];
-		xhci_dbg(xhci, "@%08x %08x %08x %08x %08x\n",
-				(unsigned int) addr,
-				lower_32_bits(entry->seg_addr),
-				upper_32_bits(entry->seg_addr),
-				(unsigned int) entry->seg_size,
-				(unsigned int) entry->rsvd);
+		xhci_dbg(xhci, "@%016llx %08x %08x %08x %08x\n",
+			 addr,
+			 lower_32_bits(le64_to_cpu(entry->seg_addr)),
+			 upper_32_bits(le64_to_cpu(entry->seg_addr)),
+			 (unsigned int) le32_to_cpu(entry->seg_size),
+			 (unsigned int) le32_to_cpu(entry->rsvd));
 		addr += sizeof(*entry);
 	}
 }
@@ -436,7 +437,7 @@ char *xhci_get_slot_state(struct xhci_hcd *xhci,
 {
 	struct xhci_slot_ctx *slot_ctx = xhci_get_slot_ctx(xhci, ctx);
 
-	switch (GET_SLOT_STATE(slot_ctx->dev_state)) {
+	switch (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state))) {
 	case 0:
 		return "enabled/disabled";
 	case 1:

drivers/usb/host/xhci-hub.c

@@ -50,7 +50,7 @@ static void xhci_common_hub_descriptor(struct xhci_hcd *xhci,
 	temp |= 0x0008;
 	/* Bits 6:5 - no TTs in root ports */
 	/* Bit  7 - no port indicators */
-	desc->wHubCharacteristics = (__force __u16) cpu_to_le16(temp);
+	desc->wHubCharacteristics = cpu_to_le16(temp);
 }
 
 /* Fill in the USB 2.0 roothub descriptor */
@@ -314,7 +314,7 @@ void xhci_ring_device(struct xhci_hcd *xhci, int slot_id)
 }
 
 static void xhci_disable_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
-		u16 wIndex, u32 __iomem *addr, u32 port_status)
+		u16 wIndex, __le32 __iomem *addr, u32 port_status)
 {
 	/* Don't allow the USB core to disable SuperSpeed ports. */
 	if (hcd->speed == HCD_USB3) {
@@ -331,7 +331,7 @@ static void xhci_disable_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
 }
 
 static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue,
-		u16 wIndex, u32 __iomem *addr, u32 port_status)
+		u16 wIndex, __le32 __iomem *addr, u32 port_status)
 {
 	char *port_change_bit;
 	u32 status;
@@ -341,6 +341,10 @@ static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue,
 		status = PORT_RC;
 		port_change_bit = "reset";
 		break;
+	case USB_PORT_FEAT_C_BH_PORT_RESET:
+		status = PORT_WRC;
+		port_change_bit = "warm(BH) reset";
+		break;
 	case USB_PORT_FEAT_C_CONNECTION:
 		status = PORT_CSC;
 		port_change_bit = "connect";
@@ -357,6 +361,10 @@ static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue,
 		status = PORT_PLC;
 		port_change_bit = "suspend/resume";
 		break;
+	case USB_PORT_FEAT_C_PORT_LINK_STATE:
+		status = PORT_PLC;
+		port_change_bit = "link state";
+		break;
 	default:
 		/* Should never happen */
 		return;
@@ -376,9 +384,10 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 	unsigned long flags;
 	u32 temp, temp1, status;
 	int retval = 0;
-	u32 __iomem **port_array;
+	__le32 __iomem **port_array;
 	int slot_id;
 	struct xhci_bus_state *bus_state;
+	u16 link_state = 0;
 
 	if (hcd->speed == HCD_USB3) {
 		ports = xhci->num_usb3_ports;
@@ -422,9 +431,6 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		}
 		xhci_dbg(xhci, "get port status, actual port %d status  = 0x%x\n", wIndex, temp);
 
-		/* FIXME - should we return a port status value like the USB
-		 * 3.0 external hubs do?
-		 */
 		/* wPortChange bits */
 		if (temp & PORT_CSC)
 			status |= USB_PORT_STAT_C_CONNECTION << 16;
@@ -432,13 +438,21 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			status |= USB_PORT_STAT_C_ENABLE << 16;
 		if ((temp & PORT_OCC))
 			status |= USB_PORT_STAT_C_OVERCURRENT << 16;
-		/*
-		 * FIXME ignoring reset and USB 2.1/3.0 specific
-		 * changes
-		 */
-		if ((temp & PORT_PLS_MASK) == XDEV_U3
-			&& (temp & PORT_POWER))
-			status |= 1 << USB_PORT_FEAT_SUSPEND;
+		if ((temp & PORT_RC))
+			status |= USB_PORT_STAT_C_RESET << 16;
+		/* USB3.0 only */
+		if (hcd->speed == HCD_USB3) {
+			if ((temp & PORT_PLC))
+				status |= USB_PORT_STAT_C_LINK_STATE << 16;
+			if ((temp & PORT_WRC))
+				status |= USB_PORT_STAT_C_BH_RESET << 16;
+		}
+
+		if (hcd->speed != HCD_USB3) {
+			if ((temp & PORT_PLS_MASK) == XDEV_U3
+					&& (temp & PORT_POWER))
+				status |= USB_PORT_STAT_SUSPEND;
+		}
 		if ((temp & PORT_PLS_MASK) == XDEV_RESUME) {
 			if ((temp & PORT_RESET) || !(temp & PORT_PE))
 				goto error;
@@ -469,7 +483,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			&& (temp & PORT_POWER)
 			&& (bus_state->suspended_ports & (1 << wIndex))) {
 			bus_state->suspended_ports &= ~(1 << wIndex);
-			bus_state->port_c_suspend |= 1 << wIndex;
+			if (hcd->speed != HCD_USB3)
+				bus_state->port_c_suspend |= 1 << wIndex;
 		}
 		if (temp & PORT_CONNECT) {
 			status |= USB_PORT_STAT_CONNECTION;
@@ -481,14 +496,28 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			status |= USB_PORT_STAT_OVERCURRENT;
 		if (temp & PORT_RESET)
 			status |= USB_PORT_STAT_RESET;
-		if (temp & PORT_POWER)
-			status |= USB_PORT_STAT_POWER;
+		if (temp & PORT_POWER) {
+			if (hcd->speed == HCD_USB3)
+				status |= USB_SS_PORT_STAT_POWER;
+			else
+				status |= USB_PORT_STAT_POWER;
+		}
+		/* Port Link State */
+		if (hcd->speed == HCD_USB3) {
+			/* resume state is a xHCI internal state.
+			 * Do not report it to usb core.
+			 */
+			if ((temp & PORT_PLS_MASK) != XDEV_RESUME)
+				status |= (temp & PORT_PLS_MASK);
+		}
 		if (bus_state->port_c_suspend & (1 << wIndex))
 			status |= 1 << USB_PORT_FEAT_C_SUSPEND;
 		xhci_dbg(xhci, "Get port status returned 0x%x\n", status);
 		put_unaligned(cpu_to_le32(status), (__le32 *) buf);
 		break;
 	case SetPortFeature:
+		if (wValue == USB_PORT_FEAT_LINK_STATE)
+			link_state = (wIndex & 0xff00) >> 3;
 		wIndex &= 0xff;
 		if (!wIndex || wIndex > ports)
 			goto error;
@@ -537,6 +566,44 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			temp = xhci_readl(xhci, port_array[wIndex]);
 			bus_state->suspended_ports |= 1 << wIndex;
 			break;
+		case USB_PORT_FEAT_LINK_STATE:
+			temp = xhci_readl(xhci, port_array[wIndex]);
+			/* Software should not attempt to set
+			 * port link state above '5' (Rx.Detect) and the port
+			 * must be enabled.
+			 */
+			if ((temp & PORT_PE) == 0 ||
+				(link_state > USB_SS_PORT_LS_RX_DETECT)) {
+				xhci_warn(xhci, "Cannot set link state.\n");
+				goto error;
+			}
+
+			if (link_state == USB_SS_PORT_LS_U3) {
+				slot_id = xhci_find_slot_id_by_port(hcd, xhci,
+						wIndex + 1);
+				if (slot_id) {
+					/* unlock to execute stop endpoint
+					 * commands */
+					spin_unlock_irqrestore(&xhci->lock,
+								flags);
+					xhci_stop_device(xhci, slot_id, 1);
+					spin_lock_irqsave(&xhci->lock, flags);
+				}
+			}
+
+			temp = xhci_port_state_to_neutral(temp);
+			temp &= ~PORT_PLS_MASK;
+			temp |= PORT_LINK_STROBE | link_state;
+			xhci_writel(xhci, temp, port_array[wIndex]);
+
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			msleep(20); /* wait device to enter */
+			spin_lock_irqsave(&xhci->lock, flags);
+
+			temp = xhci_readl(xhci, port_array[wIndex]);
+			if (link_state == USB_SS_PORT_LS_U3)
+				bus_state->suspended_ports |= 1 << wIndex;
+			break;
 		case USB_PORT_FEAT_POWER:
 			/*
 			 * Turn on ports, even if there isn't per-port switching.
@@ -557,6 +624,12 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			temp = xhci_readl(xhci, port_array[wIndex]);
 			xhci_dbg(xhci, "set port reset, actual port %d status  = 0x%x\n", wIndex, temp);
 			break;
+		case USB_PORT_FEAT_BH_PORT_RESET:
+			temp |= PORT_WR;
+			xhci_writel(xhci, temp, port_array[wIndex]);
+
+			temp = xhci_readl(xhci, port_array[wIndex]);
+			break;
 		default:
 			goto error;
 		}
@@ -584,35 +657,27 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			if (temp & XDEV_U3) {
 				if ((temp & PORT_PE) == 0)
 					goto error;
-				if (DEV_SUPERSPEED(temp)) {
-					temp = xhci_port_state_to_neutral(temp);
-					temp &= ~PORT_PLS_MASK;
-					temp |= PORT_LINK_STROBE | XDEV_U0;
-					xhci_writel(xhci, temp,
-							port_array[wIndex]);
-					xhci_readl(xhci, port_array[wIndex]);
-				} else {
-					temp = xhci_port_state_to_neutral(temp);
-					temp &= ~PORT_PLS_MASK;
-					temp |= PORT_LINK_STROBE | XDEV_RESUME;
-					xhci_writel(xhci, temp,
-							port_array[wIndex]);
 
-					spin_unlock_irqrestore(&xhci->lock,
-							       flags);
-					msleep(20);
-					spin_lock_irqsave(&xhci->lock, flags);
+				temp = xhci_port_state_to_neutral(temp);
+				temp &= ~PORT_PLS_MASK;
+				temp |= PORT_LINK_STROBE | XDEV_RESUME;
+				xhci_writel(xhci, temp,
+						port_array[wIndex]);
 
-					temp = xhci_readl(xhci,
-							port_array[wIndex]);
-					temp = xhci_port_state_to_neutral(temp);
-					temp &= ~PORT_PLS_MASK;
-					temp |= PORT_LINK_STROBE | XDEV_U0;
-					xhci_writel(xhci, temp,
-							port_array[wIndex]);
-				}
-				bus_state->port_c_suspend |= 1 << wIndex;
+				spin_unlock_irqrestore(&xhci->lock,
+						       flags);
+				msleep(20);
+				spin_lock_irqsave(&xhci->lock, flags);
+
+				temp = xhci_readl(xhci,
+						port_array[wIndex]);
+				temp = xhci_port_state_to_neutral(temp);
+				temp &= ~PORT_PLS_MASK;
+				temp |= PORT_LINK_STROBE | XDEV_U0;
+				xhci_writel(xhci, temp,
+						port_array[wIndex]);
 			}
+			bus_state->port_c_suspend |= 1 << wIndex;
 
 			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
 					wIndex + 1);
@@ -625,9 +690,11 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		case USB_PORT_FEAT_C_SUSPEND:
 			bus_state->port_c_suspend &= ~(1 << wIndex);
 		case USB_PORT_FEAT_C_RESET:
+		case USB_PORT_FEAT_C_BH_PORT_RESET:
 		case USB_PORT_FEAT_C_CONNECTION:
 		case USB_PORT_FEAT_C_OVER_CURRENT:
 		case USB_PORT_FEAT_C_ENABLE:
+		case USB_PORT_FEAT_C_PORT_LINK_STATE:
 			xhci_clear_port_change_bit(xhci, wValue, wIndex,
 					port_array[wIndex], temp);
 			break;
@@ -664,7 +731,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
 	int i, retval;
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
 	int ports;
-	u32 __iomem **port_array;
+	__le32 __iomem **port_array;
 	struct xhci_bus_state *bus_state;
 
 	if (hcd->speed == HCD_USB3) {
@@ -681,7 +748,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
 	memset(buf, 0, retval);
 	status = 0;
 
-	mask = PORT_CSC | PORT_PEC | PORT_OCC;
+	mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC;
 
 	spin_lock_irqsave(&xhci->lock, flags);
 	/* For each port, did anything change?  If so, set that bit in buf. */
@@ -709,7 +776,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 {
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
 	int max_ports, port_index;
-	u32 __iomem **port_array;
+	__le32 __iomem **port_array;
 	struct xhci_bus_state *bus_state;
 	unsigned long flags;
 
@@ -779,7 +846,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 
 		if (DEV_HIGHSPEED(t1)) {
 			/* enable remote wake up for USB 2.0 */
-			u32 __iomem *addr;
+			__le32 __iomem *addr;
 			u32 tmp;
 
 			/* Add one to the port status register address to get
@@ -801,7 +868,7 @@ int xhci_bus_resume(struct usb_hcd *hcd)
 {
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
 	int max_ports, port_index;
-	u32 __iomem **port_array;
+	__le32 __iomem **port_array;
 	struct xhci_bus_state *bus_state;
 	u32 temp;
 	unsigned long flags;
@@ -875,7 +942,7 @@ int xhci_bus_resume(struct usb_hcd *hcd)
 
 		if (DEV_HIGHSPEED(temp)) {
 			/* disable remote wake up for USB 2.0 */
-			u32 __iomem *addr;
+			__le32 __iomem *addr;
 			u32 tmp;
 
 			/* Add one to the port status register address to get

drivers/usb/host/xhci-mem.c

@@ -89,16 +89,17 @@ static void xhci_link_segments(struct xhci_hcd *xhci, struct xhci_segment *prev,
 		return;
 	prev->next = next;
 	if (link_trbs) {
-		prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr = next->dma;
+		prev->trbs[TRBS_PER_SEGMENT-1].link.
+			segment_ptr = cpu_to_le64(next->dma);
 
 		/* Set the last TRB in the segment to have a TRB type ID of Link TRB */
-		val = prev->trbs[TRBS_PER_SEGMENT-1].link.control;
+		val = le32_to_cpu(prev->trbs[TRBS_PER_SEGMENT-1].link.control);
 		val &= ~TRB_TYPE_BITMASK;
 		val |= TRB_TYPE(TRB_LINK);
 		/* Always set the chain bit with 0.95 hardware */
 		if (xhci_link_trb_quirk(xhci))
 			val |= TRB_CHAIN;
-		prev->trbs[TRBS_PER_SEGMENT-1].link.control = val;
+		prev->trbs[TRBS_PER_SEGMENT-1].link.control = cpu_to_le32(val);
 	}
 	xhci_dbg(xhci, "Linking segment 0x%llx to segment 0x%llx (DMA)\n",
 			(unsigned long long)prev->dma,
@@ -186,7 +187,8 @@ static struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci,
 
 	if (link_trbs) {
 		/* See section 4.9.2.1 and 6.4.4.1 */
-		prev->trbs[TRBS_PER_SEGMENT-1].link.control |= (LINK_TOGGLE);
+		prev->trbs[TRBS_PER_SEGMENT-1].link.
+			control |= cpu_to_le32(LINK_TOGGLE);
 		xhci_dbg(xhci, "Wrote link toggle flag to"
 				" segment %p (virtual), 0x%llx (DMA)\n",
 				prev, (unsigned long long)prev->dma);
@@ -548,7 +550,8 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
 		addr = cur_ring->first_seg->dma |
 			SCT_FOR_CTX(SCT_PRI_TR) |
 			cur_ring->cycle_state;
-		stream_info->stream_ctx_array[cur_stream].stream_ring = addr;
+		stream_info->stream_ctx_array[cur_stream].
+			stream_ring = cpu_to_le64(addr);
 		xhci_dbg(xhci, "Setting stream %d ring ptr to 0x%08llx\n",
 				cur_stream, (unsigned long long) addr);
 
@@ -614,10 +617,10 @@ void xhci_setup_streams_ep_input_ctx(struct xhci_hcd *xhci,
 	max_primary_streams = fls(stream_info->num_stream_ctxs) - 2;
 	xhci_dbg(xhci, "Setting number of stream ctx array entries to %u\n",
 			1 << (max_primary_streams + 1));
-	ep_ctx->ep_info &= ~EP_MAXPSTREAMS_MASK;
-	ep_ctx->ep_info |= EP_MAXPSTREAMS(max_primary_streams);
-	ep_ctx->ep_info |= EP_HAS_LSA;
-	ep_ctx->deq  = stream_info->ctx_array_dma;
+	ep_ctx->ep_info &= cpu_to_le32(~EP_MAXPSTREAMS_MASK);
+	ep_ctx->ep_info |= cpu_to_le32(EP_MAXPSTREAMS(max_primary_streams)
+				       | EP_HAS_LSA);
+	ep_ctx->deq  = cpu_to_le64(stream_info->ctx_array_dma);
 }
 
 /*
@@ -630,10 +633,9 @@ void xhci_setup_no_streams_ep_input_ctx(struct xhci_hcd *xhci,
 		struct xhci_virt_ep *ep)
 {
 	dma_addr_t addr;
-	ep_ctx->ep_info &= ~EP_MAXPSTREAMS_MASK;
-	ep_ctx->ep_info &= ~EP_HAS_LSA;
+	ep_ctx->ep_info &= cpu_to_le32(~(EP_MAXPSTREAMS_MASK | EP_HAS_LSA));
 	addr = xhci_trb_virt_to_dma(ep->ring->deq_seg, ep->ring->dequeue);
-	ep_ctx->deq  = addr | ep->ring->cycle_state;
+	ep_ctx->deq  = cpu_to_le64(addr | ep->ring->cycle_state);
 }
 
 /* Frees all stream contexts associated with the endpoint,
@@ -781,11 +783,11 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
 	dev->udev = udev;
 
 	/* Point to output device context in dcbaa. */
-	xhci->dcbaa->dev_context_ptrs[slot_id] = dev->out_ctx->dma;
+	xhci->dcbaa->dev_context_ptrs[slot_id] = cpu_to_le64(dev->out_ctx->dma);
 	xhci_dbg(xhci, "Set slot id %d dcbaa entry %p to 0x%llx\n",
-			slot_id,
-			&xhci->dcbaa->dev_context_ptrs[slot_id],
-			(unsigned long long) xhci->dcbaa->dev_context_ptrs[slot_id]);
+		 slot_id,
+		 &xhci->dcbaa->dev_context_ptrs[slot_id],
+		 (unsigned long long) le64_to_cpu(xhci->dcbaa->dev_context_ptrs[slot_id]));
 
 	return 1;
 fail:
@@ -810,8 +812,9 @@ void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
 	 * configured device has reset, so all control transfers should have
 	 * been completed or cancelled before the reset.
 	 */
-	ep0_ctx->deq = xhci_trb_virt_to_dma(ep_ring->enq_seg, ep_ring->enqueue);
-	ep0_ctx->deq |= ep_ring->cycle_state;
+	ep0_ctx->deq = cpu_to_le64(xhci_trb_virt_to_dma(ep_ring->enq_seg,
+							ep_ring->enqueue)
+				   | ep_ring->cycle_state);
 }
 
 /*
@@ -885,24 +888,22 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 	slot_ctx = xhci_get_slot_ctx(xhci, dev->in_ctx);
 
 	/* 2) New slot context and endpoint 0 context are valid*/
-	ctrl_ctx->add_flags = SLOT_FLAG | EP0_FLAG;
+	ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG);
 
 	/* 3) Only the control endpoint is valid - one endpoint context */
-	slot_ctx->dev_info |= LAST_CTX(1);
-
-	slot_ctx->dev_info |= (u32) udev->route;
+	slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1) | (u32) udev->route);
 	switch (udev->speed) {
 	case USB_SPEED_SUPER:
-		slot_ctx->dev_info |= (u32) SLOT_SPEED_SS;
+		slot_ctx->dev_info |= cpu_to_le32((u32) SLOT_SPEED_SS);
 		break;
 	case USB_SPEED_HIGH:
-		slot_ctx->dev_info |= (u32) SLOT_SPEED_HS;
+		slot_ctx->dev_info |= cpu_to_le32((u32) SLOT_SPEED_HS);
 		break;
 	case USB_SPEED_FULL:
-		slot_ctx->dev_info |= (u32) SLOT_SPEED_FS;
+		slot_ctx->dev_info |= cpu_to_le32((u32) SLOT_SPEED_FS);
 		break;
 	case USB_SPEED_LOW:
-		slot_ctx->dev_info |= (u32) SLOT_SPEED_LS;
+		slot_ctx->dev_info |= cpu_to_le32((u32) SLOT_SPEED_LS);
 		break;
 	case USB_SPEED_WIRELESS:
 		xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n");
@@ -916,7 +917,7 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 	port_num = xhci_find_real_port_number(xhci, udev);
 	if (!port_num)
 		return -EINVAL;
-	slot_ctx->dev_info2 |= (u32) ROOT_HUB_PORT(port_num);
+	slot_ctx->dev_info2 |= cpu_to_le32((u32) ROOT_HUB_PORT(port_num));
 	/* Set the port number in the virtual_device to the faked port number */
 	for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
 			top_dev = top_dev->parent)
@@ -927,31 +928,31 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 
 	/* Is this a LS/FS device under an external HS hub? */
 	if (udev->tt && udev->tt->hub->parent) {
-		slot_ctx->tt_info = udev->tt->hub->slot_id;
-		slot_ctx->tt_info |= udev->ttport << 8;
+		slot_ctx->tt_info = cpu_to_le32(udev->tt->hub->slot_id |
+						(udev->ttport << 8));
 		if (udev->tt->multi)
-			slot_ctx->dev_info |= DEV_MTT;
+			slot_ctx->dev_info |= cpu_to_le32(DEV_MTT);
 	}
 	xhci_dbg(xhci, "udev->tt = %p\n", udev->tt);
 	xhci_dbg(xhci, "udev->ttport = 0x%x\n", udev->ttport);
 
 	/* Step 4 - ring already allocated */
 	/* Step 5 */
-	ep0_ctx->ep_info2 = EP_TYPE(CTRL_EP);
+	ep0_ctx->ep_info2 = cpu_to_le32(EP_TYPE(CTRL_EP));
 	/*
 	 * XXX: Not sure about wireless USB devices.
 	 */
 	switch (udev->speed) {
 	case USB_SPEED_SUPER:
-		ep0_ctx->ep_info2 |= MAX_PACKET(512);
+		ep0_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(512));
 		break;
 	case USB_SPEED_HIGH:
 	/* USB core guesses at a 64-byte max packet first for FS devices */
 	case USB_SPEED_FULL:
-		ep0_ctx->ep_info2 |= MAX_PACKET(64);
+		ep0_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(64));
 		break;
 	case USB_SPEED_LOW:
-		ep0_ctx->ep_info2 |= MAX_PACKET(8);
+		ep0_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(8));
 		break;
 	case USB_SPEED_WIRELESS:
 		xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n");
@@ -962,12 +963,10 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 		BUG();
 	}
 	/* EP 0 can handle "burst" sizes of 1, so Max Burst Size field is 0 */
-	ep0_ctx->ep_info2 |= MAX_BURST(0);
-	ep0_ctx->ep_info2 |= ERROR_COUNT(3);
+	ep0_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(0) | ERROR_COUNT(3));
 
-	ep0_ctx->deq =
-		dev->eps[0].ring->first_seg->dma;
-	ep0_ctx->deq |= dev->eps[0].ring->cycle_state;
+	ep0_ctx->deq = cpu_to_le64(dev->eps[0].ring->first_seg->dma |
+				   dev->eps[0].ring->cycle_state);
 
 	/* Steps 7 and 8 were done in xhci_alloc_virt_device() */
 
@@ -1131,10 +1130,10 @@ static u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci,
 		return 0;
 
 	if (udev->speed == USB_SPEED_SUPER)
-		return ep->ss_ep_comp.wBytesPerInterval;
+		return le16_to_cpu(ep->ss_ep_comp.wBytesPerInterval);
 
-	max_packet = GET_MAX_PACKET(ep->desc.wMaxPacketSize);
-	max_burst = (ep->desc.wMaxPacketSize & 0x1800) >> 11;
+	max_packet = GET_MAX_PACKET(le16_to_cpu(ep->desc.wMaxPacketSize));
+	max_burst = (le16_to_cpu(ep->desc.wMaxPacketSize) & 0x1800) >> 11;
 	/* A 0 in max burst means 1 transfer per ESIT */
 	return max_packet * (max_burst + 1);
 }
@@ -1183,10 +1182,10 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 	}
 	virt_dev->eps[ep_index].skip = false;
 	ep_ring = virt_dev->eps[ep_index].new_ring;
-	ep_ctx->deq = ep_ring->first_seg->dma | ep_ring->cycle_state;
+	ep_ctx->deq = cpu_to_le64(ep_ring->first_seg->dma | ep_ring->cycle_state);
 
-	ep_ctx->ep_info = xhci_get_endpoint_interval(udev, ep);
-	ep_ctx->ep_info |= EP_MULT(xhci_get_endpoint_mult(udev, ep));
+	ep_ctx->ep_info = cpu_to_le32(xhci_get_endpoint_interval(udev, ep)
+				      | EP_MULT(xhci_get_endpoint_mult(udev, ep)));
 
 	/* FIXME dig Mult and streams info out of ep companion desc */
 
@@ -1194,22 +1193,22 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 	 * error count = 0 means infinite retries.
 	 */
 	if (!usb_endpoint_xfer_isoc(&ep->desc))
-		ep_ctx->ep_info2 = ERROR_COUNT(3);
+		ep_ctx->ep_info2 = cpu_to_le32(ERROR_COUNT(3));
 	else
-		ep_ctx->ep_info2 = ERROR_COUNT(1);
+		ep_ctx->ep_info2 = cpu_to_le32(ERROR_COUNT(1));
 
-	ep_ctx->ep_info2 |= xhci_get_endpoint_type(udev, ep);
+	ep_ctx->ep_info2 |= cpu_to_le32(xhci_get_endpoint_type(udev, ep));
 
 	/* Set the max packet size and max burst */
 	switch (udev->speed) {
 	case USB_SPEED_SUPER:
-		max_packet = ep->desc.wMaxPacketSize;
-		ep_ctx->ep_info2 |= MAX_PACKET(max_packet);
+		max_packet = le16_to_cpu(ep->desc.wMaxPacketSize);
+		ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet));
 		/* dig out max burst from ep companion desc */
 		max_packet = ep->ss_ep_comp.bMaxBurst;
 		if (!max_packet)
 			xhci_warn(xhci, "WARN no SS endpoint bMaxBurst\n");
-		ep_ctx->ep_info2 |= MAX_BURST(max_packet);
+		ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_packet));
 		break;
 	case USB_SPEED_HIGH:
 		/* bits 11:12 specify the number of additional transaction
@@ -1217,20 +1216,21 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 		 */
 		if (usb_endpoint_xfer_isoc(&ep->desc) ||
 				usb_endpoint_xfer_int(&ep->desc)) {
-			max_burst = (ep->desc.wMaxPacketSize & 0x1800) >> 11;
-			ep_ctx->ep_info2 |= MAX_BURST(max_burst);
+			max_burst = (le16_to_cpu(ep->desc.wMaxPacketSize)
+				     & 0x1800) >> 11;
+			ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_burst));
 		}
 		/* Fall through */
 	case USB_SPEED_FULL:
 	case USB_SPEED_LOW:
-		max_packet = GET_MAX_PACKET(ep->desc.wMaxPacketSize);
-		ep_ctx->ep_info2 |= MAX_PACKET(max_packet);
+		max_packet = GET_MAX_PACKET(le16_to_cpu(ep->desc.wMaxPacketSize));
+		ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet));
 		break;
 	default:
 		BUG();
 	}
 	max_esit_payload = xhci_get_max_esit_payload(xhci, udev, ep);
-	ep_ctx->tx_info = MAX_ESIT_PAYLOAD_FOR_EP(max_esit_payload);
+	ep_ctx->tx_info = cpu_to_le32(MAX_ESIT_PAYLOAD_FOR_EP(max_esit_payload));
 
 	/*
 	 * XXX no idea how to calculate the average TRB buffer length for bulk
@@ -1247,7 +1247,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 	 * use Event Data TRBs, and we don't chain in a link TRB on short
 	 * transfers, we're basically dividing by 1.
 	 */
-	ep_ctx->tx_info |= AVG_TRB_LENGTH_FOR_EP(max_esit_payload);
+	ep_ctx->tx_info |= cpu_to_le32(AVG_TRB_LENGTH_FOR_EP(max_esit_payload));
 
 	/* FIXME Debug endpoint context */
 	return 0;
@@ -1347,7 +1347,7 @@ static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags)
 	if (!xhci->scratchpad->sp_dma_buffers)
 		goto fail_sp4;
 
-	xhci->dcbaa->dev_context_ptrs[0] = xhci->scratchpad->sp_dma;
+	xhci->dcbaa->dev_context_ptrs[0] = cpu_to_le64(xhci->scratchpad->sp_dma);
 	for (i = 0; i < num_sp; i++) {
 		dma_addr_t dma;
 		void *buf = pci_alloc_consistent(to_pci_dev(dev),
@@ -1724,7 +1724,7 @@ static void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
 }
 
 static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
-		u32 __iomem *addr, u8 major_revision)
+		__le32 __iomem *addr, u8 major_revision)
 {
 	u32 temp, port_offset, port_count;
 	int i;
@@ -1789,7 +1789,7 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
  */
 static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
 {
-	u32 __iomem *addr;
+	__le32 __iomem *addr;
 	u32 offset;
 	unsigned int num_ports;
 	int i, port_index;
@@ -2042,8 +2042,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	/* set ring base address and size for each segment table entry */
 	for (val = 0, seg = xhci->event_ring->first_seg; val < ERST_NUM_SEGS; val++) {
 		struct xhci_erst_entry *entry = &xhci->erst.entries[val];
-		entry->seg_addr = seg->dma;
-		entry->seg_size = TRBS_PER_SEGMENT;
+		entry->seg_addr = cpu_to_le64(seg->dma);
+		entry->seg_size = cpu_to_le32(TRBS_PER_SEGMENT);
 		entry->rsvd = 0;
 		seg = seg->next;
 	}

drivers/usb/host/xhci.c

@@ -973,8 +973,8 @@ static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id,
 
 	out_ctx = xhci->devs[slot_id]->out_ctx;
 	ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
-	hw_max_packet_size = MAX_PACKET_DECODED(ep_ctx->ep_info2);
-	max_packet_size = urb->dev->ep0.desc.wMaxPacketSize;
+	hw_max_packet_size = MAX_PACKET_DECODED(le32_to_cpu(ep_ctx->ep_info2));
+	max_packet_size = le16_to_cpu(urb->dev->ep0.desc.wMaxPacketSize);
 	if (hw_max_packet_size != max_packet_size) {
 		xhci_dbg(xhci, "Max Packet Size for ep 0 changed.\n");
 		xhci_dbg(xhci, "Max packet size in usb_device = %d\n",
@@ -988,15 +988,15 @@ static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id,
 				xhci->devs[slot_id]->out_ctx, ep_index);
 		in_ctx = xhci->devs[slot_id]->in_ctx;
 		ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index);
-		ep_ctx->ep_info2 &= ~MAX_PACKET_MASK;
-		ep_ctx->ep_info2 |= MAX_PACKET(max_packet_size);
+		ep_ctx->ep_info2 &= cpu_to_le32(~MAX_PACKET_MASK);
+		ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet_size));
 
 		/* Set up the input context flags for the command */
 		/* FIXME: This won't work if a non-default control endpoint
 		 * changes max packet sizes.
 		 */
 		ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
-		ctrl_ctx->add_flags = EP0_FLAG;
+		ctrl_ctx->add_flags = cpu_to_le32(EP0_FLAG);
 		ctrl_ctx->drop_flags = 0;
 
 		xhci_dbg(xhci, "Slot %d input context\n", slot_id);
@@ -1010,7 +1010,7 @@ static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id,
 		/* Clean up the input context for later use by bandwidth
 		 * functions.
 		 */
-		ctrl_ctx->add_flags = SLOT_FLAG;
+		ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG);
 	}
 	return ret;
 }
@@ -1331,27 +1331,30 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 	/* If the HC already knows the endpoint is disabled,
 	 * or the HCD has noted it is disabled, ignore this request
 	 */
-	if ((ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED ||
-			ctrl_ctx->drop_flags & xhci_get_endpoint_flag(&ep->desc)) {
+	if ((le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK) ==
+	    EP_STATE_DISABLED ||
+	    le32_to_cpu(ctrl_ctx->drop_flags) &
+	    xhci_get_endpoint_flag(&ep->desc)) {
 		xhci_warn(xhci, "xHCI %s called with disabled ep %p\n",
 				__func__, ep);
 		return 0;
 	}
 
-	ctrl_ctx->drop_flags |= drop_flag;
-	new_drop_flags = ctrl_ctx->drop_flags;
+	ctrl_ctx->drop_flags |= cpu_to_le32(drop_flag);
+	new_drop_flags = le32_to_cpu(ctrl_ctx->drop_flags);
 
-	ctrl_ctx->add_flags &= ~drop_flag;
-	new_add_flags = ctrl_ctx->add_flags;
+	ctrl_ctx->add_flags &= cpu_to_le32(~drop_flag);
+	new_add_flags = le32_to_cpu(ctrl_ctx->add_flags);
 
-	last_ctx = xhci_last_valid_endpoint(ctrl_ctx->add_flags);
+	last_ctx = xhci_last_valid_endpoint(le32_to_cpu(ctrl_ctx->add_flags));
 	slot_ctx = xhci_get_slot_ctx(xhci, in_ctx);
 	/* Update the last valid endpoint context, if we deleted the last one */
-	if ((slot_ctx->dev_info & LAST_CTX_MASK) > LAST_CTX(last_ctx)) {
-		slot_ctx->dev_info &= ~LAST_CTX_MASK;
-		slot_ctx->dev_info |= LAST_CTX(last_ctx);
+	if ((le32_to_cpu(slot_ctx->dev_info) & LAST_CTX_MASK) >
+	    LAST_CTX(last_ctx)) {
+		slot_ctx->dev_info &= cpu_to_le32(~LAST_CTX_MASK);
+		slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(last_ctx));
 	}
-	new_slot_info = slot_ctx->dev_info;
+	new_slot_info = le32_to_cpu(slot_ctx->dev_info);
 
 	xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
 
@@ -1419,7 +1422,8 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 	/* If the HCD has already noted the endpoint is enabled,
 	 * ignore this request.
 	 */
-	if (ctrl_ctx->add_flags & xhci_get_endpoint_flag(&ep->desc)) {
+	if (le32_to_cpu(ctrl_ctx->add_flags) &
+	    xhci_get_endpoint_flag(&ep->desc)) {
 		xhci_warn(xhci, "xHCI %s called with enabled ep %p\n",
 				__func__, ep);
 		return 0;
@@ -1437,8 +1441,8 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 		return -ENOMEM;
 	}
 
-	ctrl_ctx->add_flags |= added_ctxs;
-	new_add_flags = ctrl_ctx->add_flags;
+	ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs);
+	new_add_flags = le32_to_cpu(ctrl_ctx->add_flags);
 
 	/* If xhci_endpoint_disable() was called for this endpoint, but the
 	 * xHC hasn't been notified yet through the check_bandwidth() call,
@@ -1446,15 +1450,16 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 	 * descriptors.  We must drop and re-add this endpoint, so we leave the
 	 * drop flags alone.
 	 */
-	new_drop_flags = ctrl_ctx->drop_flags;
+	new_drop_flags = le32_to_cpu(ctrl_ctx->drop_flags);
 
 	slot_ctx = xhci_get_slot_ctx(xhci, in_ctx);
 	/* Update the last valid endpoint context, if we just added one past */
-	if ((slot_ctx->dev_info & LAST_CTX_MASK) < LAST_CTX(last_ctx)) {
-		slot_ctx->dev_info &= ~LAST_CTX_MASK;
-		slot_ctx->dev_info |= LAST_CTX(last_ctx);
+	if ((le32_to_cpu(slot_ctx->dev_info) & LAST_CTX_MASK) <
+	    LAST_CTX(last_ctx)) {
+		slot_ctx->dev_info &= cpu_to_le32(~LAST_CTX_MASK);
+		slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(last_ctx));
 	}
-	new_slot_info = slot_ctx->dev_info;
+	new_slot_info = le32_to_cpu(slot_ctx->dev_info);
 
 	/* Store the usb_device pointer for later use */
 	ep->hcpriv = udev;
@@ -1484,9 +1489,9 @@ static void xhci_zero_in_ctx(struct xhci_hcd *xhci, struct xhci_virt_device *vir
 	ctrl_ctx->drop_flags = 0;
 	ctrl_ctx->add_flags = 0;
 	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
-	slot_ctx->dev_info &= ~LAST_CTX_MASK;
+	slot_ctx->dev_info &= cpu_to_le32(~LAST_CTX_MASK);
 	/* Endpoint 0 is always valid */
-	slot_ctx->dev_info |= LAST_CTX(1);
+	slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1));
 	for (i = 1; i < 31; ++i) {
 		ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, i);
 		ep_ctx->ep_info = 0;
@@ -1497,7 +1502,7 @@ static void xhci_zero_in_ctx(struct xhci_hcd *xhci, struct xhci_virt_device *vir
 }
 
 static int xhci_configure_endpoint_result(struct xhci_hcd *xhci,
-		struct usb_device *udev, int *cmd_status)
+		struct usb_device *udev, u32 *cmd_status)
 {
 	int ret;
 
@@ -1535,7 +1540,7 @@ static int xhci_configure_endpoint_result(struct xhci_hcd *xhci,
 }
 
 static int xhci_evaluate_context_result(struct xhci_hcd *xhci,
-		struct usb_device *udev, int *cmd_status)
+		struct usb_device *udev, u32 *cmd_status)
 {
 	int ret;
 	struct xhci_virt_device *virt_dev = xhci->devs[udev->slot_id];
@@ -1581,7 +1586,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
 	unsigned long flags;
 	struct xhci_container_ctx *in_ctx;
 	struct completion *cmd_completion;
-	int *cmd_status;
+	u32 *cmd_status;
 	struct xhci_virt_device *virt_dev;
 
 	spin_lock_irqsave(&xhci->lock, flags);
@@ -1595,8 +1600,8 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
 		/* Enqueue pointer can be left pointing to the link TRB,
 		 * we must handle that
 		 */
-		if ((command->command_trb->link.control & TRB_TYPE_BITMASK)
-				== TRB_TYPE(TRB_LINK))
+		if ((le32_to_cpu(command->command_trb->link.control)
+		     & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK))
 			command->command_trb =
 				xhci->cmd_ring->enq_seg->next->trbs;
 
@@ -1672,14 +1677,13 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
 
 	/* See section 4.6.6 - A0 = 1; A1 = D0 = D1 = 0 */
 	ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
-	ctrl_ctx->add_flags |= SLOT_FLAG;
-	ctrl_ctx->add_flags &= ~EP0_FLAG;
-	ctrl_ctx->drop_flags &= ~SLOT_FLAG;
-	ctrl_ctx->drop_flags &= ~EP0_FLAG;
+	ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
+	ctrl_ctx->add_flags &= cpu_to_le32(~EP0_FLAG);
+	ctrl_ctx->drop_flags &= cpu_to_le32(~(SLOT_FLAG | EP0_FLAG));
 	xhci_dbg(xhci, "New Input Control Context:\n");
 	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
 	xhci_dbg_ctx(xhci, virt_dev->in_ctx,
-			LAST_CTX_TO_EP_NUM(slot_ctx->dev_info));
+		     LAST_CTX_TO_EP_NUM(le32_to_cpu(slot_ctx->dev_info)));
 
 	ret = xhci_configure_endpoint(xhci, udev, NULL,
 			false, false);
@@ -1690,7 +1694,7 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
 
 	xhci_dbg(xhci, "Output context after successful config ep cmd:\n");
 	xhci_dbg_ctx(xhci, virt_dev->out_ctx,
-			LAST_CTX_TO_EP_NUM(slot_ctx->dev_info));
+		     LAST_CTX_TO_EP_NUM(le32_to_cpu(slot_ctx->dev_info)));
 
 	xhci_zero_in_ctx(xhci, virt_dev);
 	/* Install new rings and free or cache any old rings */
@@ -1740,10 +1744,10 @@ static void xhci_setup_input_ctx_for_config_ep(struct xhci_hcd *xhci,
 {
 	struct xhci_input_control_ctx *ctrl_ctx;
 	ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
-	ctrl_ctx->add_flags = add_flags;
-	ctrl_ctx->drop_flags = drop_flags;
+	ctrl_ctx->add_flags = cpu_to_le32(add_flags);
+	ctrl_ctx->drop_flags = cpu_to_le32(drop_flags);
 	xhci_slot_copy(xhci, in_ctx, out_ctx);
-	ctrl_ctx->add_flags |= SLOT_FLAG;
+	ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
 
 	xhci_dbg(xhci, "Input Context:\n");
 	xhci_dbg_ctx(xhci, in_ctx, xhci_last_valid_endpoint(add_flags));
@@ -1772,7 +1776,7 @@ static void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci,
 				deq_state->new_deq_ptr);
 		return;
 	}
-	ep_ctx->deq = addr | deq_state->new_cycle_state;
+	ep_ctx->deq = cpu_to_le64(addr | deq_state->new_cycle_state);
 
 	added_ctxs = xhci_get_endpoint_flag_from_index(ep_index);
 	xhci_setup_input_ctx_for_config_ep(xhci, xhci->devs[slot_id]->in_ctx,
@@ -2327,8 +2331,8 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
 	/* Enqueue pointer can be left pointing to the link TRB,
 	 * we must handle that
 	 */
-	if ((reset_device_cmd->command_trb->link.control & TRB_TYPE_BITMASK)
-			== TRB_TYPE(TRB_LINK))
+	if ((le32_to_cpu(reset_device_cmd->command_trb->link.control)
+	     & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK))
 		reset_device_cmd->command_trb =
 			xhci->cmd_ring->enq_seg->next->trbs;
 
@@ -2542,6 +2546,17 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 
 	virt_dev = xhci->devs[udev->slot_id];
 
+	if (WARN_ON(!virt_dev)) {
+		/*
+		 * In plug/unplug torture test with an NEC controller,
+		 * a zero-dereference was observed once due to virt_dev = 0.
+		 * Print useful debug rather than crash if it is observed again!
+		 */
+		xhci_warn(xhci, "Virt dev invalid for slot_id 0x%x!\n",
+			udev->slot_id);
+		return -EINVAL;
+	}
+
 	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
 	/*
 	 * If this is the first Set Address since device plug-in or
@@ -2609,10 +2624,10 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 	temp_64 = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
 	xhci_dbg(xhci, "Op regs DCBAA ptr = %#016llx\n", temp_64);
 	xhci_dbg(xhci, "Slot ID %d dcbaa entry @%p = %#016llx\n",
-			udev->slot_id,
-			&xhci->dcbaa->dev_context_ptrs[udev->slot_id],
-			(unsigned long long)
-				xhci->dcbaa->dev_context_ptrs[udev->slot_id]);
+		 udev->slot_id,
+		 &xhci->dcbaa->dev_context_ptrs[udev->slot_id],
+		 (unsigned long long)
+		 le64_to_cpu(xhci->dcbaa->dev_context_ptrs[udev->slot_id]));
 	xhci_dbg(xhci, "Output Context DMA address = %#08llx\n",
 			(unsigned long long)virt_dev->out_ctx->dma);
 	xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
@@ -2626,7 +2641,8 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
 	/* Use kernel assigned address for devices; store xHC assigned
 	 * address locally. */
-	virt_dev->address = (slot_ctx->dev_state & DEV_ADDR_MASK) + 1;
+	virt_dev->address = (le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK)
+		+ 1;
 	/* Zero the input context control for later use */
 	ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
 	ctrl_ctx->add_flags = 0;
@@ -2670,16 +2686,16 @@ int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
 	spin_lock_irqsave(&xhci->lock, flags);
 	xhci_slot_copy(xhci, config_cmd->in_ctx, vdev->out_ctx);
 	ctrl_ctx = xhci_get_input_control_ctx(xhci, config_cmd->in_ctx);
-	ctrl_ctx->add_flags |= SLOT_FLAG;
+	ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
 	slot_ctx = xhci_get_slot_ctx(xhci, config_cmd->in_ctx);
-	slot_ctx->dev_info |= DEV_HUB;
+	slot_ctx->dev_info |= cpu_to_le32(DEV_HUB);
 	if (tt->multi)
-		slot_ctx->dev_info |= DEV_MTT;
+		slot_ctx->dev_info |= cpu_to_le32(DEV_MTT);
 	if (xhci->hci_version > 0x95) {
 		xhci_dbg(xhci, "xHCI version %x needs hub "
 				"TT think time and number of ports\n",
 				(unsigned int) xhci->hci_version);
-		slot_ctx->dev_info2 |= XHCI_MAX_PORTS(hdev->maxchild);
+		slot_ctx->dev_info2 |= cpu_to_le32(XHCI_MAX_PORTS(hdev->maxchild));
 		/* Set TT think time - convert from ns to FS bit times.
 		 * 0 = 8 FS bit times, 1 = 16 FS bit times,
 		 * 2 = 24 FS bit times, 3 = 32 FS bit times.
@@ -2687,7 +2703,7 @@ int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
 		think_time = tt->think_time;
 		if (think_time != 0)
 			think_time = (think_time / 666) - 1;
-		slot_ctx->tt_info |= TT_THINK_TIME(think_time);
+		slot_ctx->tt_info |= cpu_to_le32(TT_THINK_TIME(think_time));
 	} else {
 		xhci_dbg(xhci, "xHCI version %x doesn't need hub "
 				"TT think time or number of ports\n",

drivers/usb/host/xhci.h

@@ -57,13 +57,13 @@
  * @run_regs_off:	RTSOFF - Runtime register space offset
  */
 struct xhci_cap_regs {
-	u32	hc_capbase;
-	u32	hcs_params1;
-	u32	hcs_params2;
-	u32	hcs_params3;
-	u32	hcc_params;
-	u32	db_off;
-	u32	run_regs_off;
+	__le32	hc_capbase;
+	__le32	hcs_params1;
+	__le32	hcs_params2;
+	__le32	hcs_params3;
+	__le32	hcc_params;
+	__le32	db_off;
+	__le32	run_regs_off;
 	/* Reserved up to (CAPLENGTH - 0x1C) */
 };
 
@@ -155,26 +155,26 @@ struct xhci_cap_regs {
  * 			devices.
  */
 struct xhci_op_regs {
-	u32	command;
-	u32	status;
-	u32	page_size;
-	u32	reserved1;
-	u32	reserved2;
-	u32	dev_notification;
-	u64	cmd_ring;
+	__le32	command;
+	__le32	status;
+	__le32	page_size;
+	__le32	reserved1;
+	__le32	reserved2;
+	__le32	dev_notification;
+	__le64	cmd_ring;
 	/* rsvd: offset 0x20-2F */
-	u32	reserved3[4];
-	u64	dcbaa_ptr;
-	u32	config_reg;
+	__le32	reserved3[4];
+	__le64	dcbaa_ptr;
+	__le32	config_reg;
 	/* rsvd: offset 0x3C-3FF */
-	u32	reserved4[241];
+	__le32	reserved4[241];
 	/* port 1 registers, which serve as a base address for other ports */
-	u32	port_status_base;
-	u32	port_power_base;
-	u32	port_link_base;
-	u32	reserved5;
+	__le32	port_status_base;
+	__le32	port_power_base;
+	__le32	port_link_base;
+	__le32	reserved5;
 	/* registers for ports 2-255 */
-	u32	reserved6[NUM_PORT_REGS*254];
+	__le32	reserved6[NUM_PORT_REGS*254];
 };
 
 /* USBCMD - USB command - command bitmasks */
@@ -382,12 +382,12 @@ struct xhci_op_regs {
  * updates the dequeue pointer.
  */
 struct xhci_intr_reg {
-	u32	irq_pending;
-	u32	irq_control;
-	u32	erst_size;
-	u32	rsvd;
-	u64	erst_base;
-	u64	erst_dequeue;
+	__le32	irq_pending;
+	__le32	irq_control;
+	__le32	erst_size;
+	__le32	rsvd;
+	__le64	erst_base;
+	__le64	erst_dequeue;
 };
 
 /* irq_pending bitmasks */
@@ -432,8 +432,8 @@ struct xhci_intr_reg {
  * or larger accesses"
  */
 struct xhci_run_regs {
-	u32			microframe_index;
-	u32			rsvd[7];
+	__le32			microframe_index;
+	__le32			rsvd[7];
 	struct xhci_intr_reg	ir_set[128];
 };
 
@@ -447,7 +447,7 @@ struct xhci_run_regs {
  * Section 5.6
  */
 struct xhci_doorbell_array {
-	u32	doorbell[256];
+	__le32	doorbell[256];
 };
 
 #define DB_VALUE(ep, stream)	((((ep) + 1) & 0xff) | ((stream) << 16))
@@ -504,12 +504,12 @@ struct xhci_container_ctx {
  * reserved at the end of the slot context for HC internal use.
  */
 struct xhci_slot_ctx {
-	u32	dev_info;
-	u32	dev_info2;
-	u32	tt_info;
-	u32	dev_state;
+	__le32	dev_info;
+	__le32	dev_info2;
+	__le32	tt_info;
+	__le32	dev_state;
 	/* offset 0x10 to 0x1f reserved for HC internal use */
-	u32	reserved[4];
+	__le32	reserved[4];
 };
 
 /* dev_info bitmasks */
@@ -580,12 +580,12 @@ struct xhci_slot_ctx {
  * reserved at the end of the endpoint context for HC internal use.
  */
 struct xhci_ep_ctx {
-	u32	ep_info;
-	u32	ep_info2;
-	u64	deq;
-	u32	tx_info;
+	__le32	ep_info;
+	__le32	ep_info2;
+	__le64	deq;
+	__le32	tx_info;
 	/* offset 0x14 - 0x1f reserved for HC internal use */
-	u32	reserved[3];
+	__le32	reserved[3];
 };
 
 /* ep_info bitmasks */
@@ -660,9 +660,9 @@ struct xhci_ep_ctx {
  * @add_context:	set the bit of the endpoint context you want to enable
  */
 struct xhci_input_control_ctx {
-	u32	drop_flags;
-	u32	add_flags;
-	u32	rsvd2[6];
+	__le32	drop_flags;
+	__le32	add_flags;
+	__le32	rsvd2[6];
 };
 
 /* Represents everything that is needed to issue a command on the command ring.
@@ -688,9 +688,9 @@ struct xhci_command {
 
 struct xhci_stream_ctx {
 	/* 64-bit stream ring address, cycle state, and stream type */
-	u64	stream_ring;
+	__le64	stream_ring;
 	/* offset 0x14 - 0x1f reserved for HC internal use */
-	u32	reserved[2];
+	__le32	reserved[2];
 };
 
 /* Stream Context Types (section 6.4.1) - bits 3:1 of stream ctx deq ptr */
@@ -803,7 +803,7 @@ struct xhci_virt_device {
  */
 struct xhci_device_context_array {
 	/* 64-bit device addresses; we only write 32-bit addresses */
-	u64			dev_context_ptrs[MAX_HC_SLOTS];
+	__le64			dev_context_ptrs[MAX_HC_SLOTS];
 	/* private xHCD pointers */
 	dma_addr_t	dma;
 };
@@ -816,10 +816,10 @@ struct xhci_device_context_array {
 
 struct xhci_transfer_event {
 	/* 64-bit buffer address, or immediate data */
-	u64	buffer;
-	u32	transfer_len;
+	__le64	buffer;
+	__le32	transfer_len;
 	/* This field is interpreted differently based on the type of TRB */
-	u32	flags;
+	__le32	flags;
 };
 
 /** Transfer Event bit fields **/
@@ -898,9 +898,9 @@ struct xhci_transfer_event {
 
 struct xhci_link_trb {
 	/* 64-bit segment pointer*/
-	u64 segment_ptr;
-	u32 intr_target;
-	u32 control;
+	__le64 segment_ptr;
+	__le32 intr_target;
+	__le32 control;
 };
 
 /* control bitfields */
@@ -909,9 +909,9 @@ struct xhci_link_trb {
 /* Command completion event TRB */
 struct xhci_event_cmd {
 	/* Pointer to command TRB, or the value passed by the event data trb */
-	u64 cmd_trb;
-	u32 status;
-	u32 flags;
+	__le64 cmd_trb;
+	__le32 status;
+	__le32 flags;
 };
 
 /* flags bitmasks */
@@ -943,6 +943,8 @@ struct xhci_event_cmd {
 /* Interrupter Target - which MSI-X vector to target the completion event at */
 #define TRB_INTR_TARGET(p)	(((p) & 0x3ff) << 22)
 #define GET_INTR_TARGET(p)	(((p) >> 22) & 0x3ff)
+#define TRB_TBC(p)		(((p) & 0x3) << 7)
+#define TRB_TLBPC(p)		(((p) & 0xf) << 16)
 
 /* Cycle bit - indicates TRB ownership by HC or HCD */
 #define TRB_CYCLE		(1<<0)
@@ -970,7 +972,7 @@ struct xhci_event_cmd {
 #define TRB_SIA			(1<<31)
 
 struct xhci_generic_trb {
-	u32 field[4];
+	__le32 field[4];
 };
 
 union xhci_trb {
@@ -1118,10 +1120,10 @@ struct xhci_ring {
 
 struct xhci_erst_entry {
 	/* 64-bit event ring segment address */
-	u64	seg_addr;
-	u32	seg_size;
+	__le64	seg_addr;
+	__le32	seg_size;
 	/* Set to zero */
-	u32	rsvd;
+	__le32	rsvd;
 };
 
 struct xhci_erst {
@@ -1286,10 +1288,10 @@ struct xhci_hcd {
 	/* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */
 	u8			*port_array;
 	/* Array of pointers to USB 3.0 PORTSC registers */
-	u32 __iomem		**usb3_ports;
+	__le32 __iomem		**usb3_ports;
 	unsigned int		num_usb3_ports;
 	/* Array of pointers to USB 2.0 PORTSC registers */
-	u32 __iomem		**usb2_ports;
+	__le32 __iomem		**usb2_ports;
 	unsigned int		num_usb2_ports;
 };
 
@@ -1322,12 +1324,12 @@ static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci)
 /* TODO: copied from ehci.h - can be refactored? */
 /* xHCI spec says all registers are little endian */
 static inline unsigned int xhci_readl(const struct xhci_hcd *xhci,
-		__u32 __iomem *regs)
+		__le32 __iomem *regs)
 {
 	return readl(regs);
 }
 static inline void xhci_writel(struct xhci_hcd *xhci,
-		const unsigned int val, __u32 __iomem *regs)
+		const unsigned int val, __le32 __iomem *regs)
 {
 	xhci_dbg(xhci,
 			"`MEM_WRITE_DWORD(3'b000, 32'h%p, 32'h%0x, 4'hf);\n",
@@ -1345,7 +1347,7 @@ static inline void xhci_writel(struct xhci_hcd *xhci,
  * the high dword, and write order is irrelevant.
  */
 static inline u64 xhci_read_64(const struct xhci_hcd *xhci,
-		__u64 __iomem *regs)
+		__le64 __iomem *regs)
 {
 	__u32 __iomem *ptr = (__u32 __iomem *) regs;
 	u64 val_lo = readl(ptr);
@@ -1353,7 +1355,7 @@ static inline u64 xhci_read_64(const struct xhci_hcd *xhci,
 	return val_lo + (val_hi << 32);
 }
 static inline void xhci_write_64(struct xhci_hcd *xhci,
-		const u64 val, __u64 __iomem *regs)
+				 const u64 val, __le64 __iomem *regs)
 {
 	__u32 __iomem *ptr = (__u32 __iomem *) regs;
 	u32 val_lo = lower_32_bits(val);

include/linux/usb/ch9.h

@@ -579,7 +579,7 @@ struct usb_ss_ep_comp_descriptor {
 
 	__u8  bMaxBurst;
 	__u8  bmAttributes;
-	__u16 wBytesPerInterval;
+	__le16 wBytesPerInterval;
 } __attribute__ ((packed));
 
 #define USB_DT_SS_EP_COMP_SIZE		6