提交 dbbc5d11 编写于 作者: N Nicholas Bellinger

iser-target: Rename sense_buf_[dma,len] to pdu_[dma,len]

Now that these two variables are used for REJECT payloads as well
as SCSI response sense payloads, rename them to something that
makes more sense.
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
上级 c5a2adbf
......@@ -1286,11 +1286,11 @@ static void
isert_completion_put(struct iser_tx_desc *tx_desc, struct isert_cmd *isert_cmd,
struct ib_device *ib_dev)
{
if (isert_cmd->sense_buf_dma != 0) {
pr_debug("Calling ib_dma_unmap_single for isert_cmd->sense_buf_dma\n");
ib_dma_unmap_single(ib_dev, isert_cmd->sense_buf_dma,
isert_cmd->sense_buf_len, DMA_TO_DEVICE);
isert_cmd->sense_buf_dma = 0;
if (isert_cmd->pdu_buf_dma != 0) {
pr_debug("Calling ib_dma_unmap_single for isert_cmd->pdu_buf_dma\n");
ib_dma_unmap_single(ib_dev, isert_cmd->pdu_buf_dma,
isert_cmd->pdu_buf_len, DMA_TO_DEVICE);
isert_cmd->pdu_buf_dma = 0;
}
isert_unmap_tx_desc(tx_desc, ib_dev);
......@@ -1588,7 +1588,7 @@ isert_put_response(struct iscsi_conn *conn, struct iscsi_cmd *cmd)
(cmd->se_cmd.se_cmd_flags & SCF_EMULATED_TASK_SENSE))) {
struct ib_device *ib_dev = isert_conn->conn_cm_id->device;
struct ib_sge *tx_dsg = &isert_cmd->tx_desc.tx_sg[1];
u32 padding, sense_len;
u32 padding, pdu_len;
put_unaligned_be16(cmd->se_cmd.scsi_sense_length,
cmd->sense_buffer);
......@@ -1596,15 +1596,15 @@ isert_put_response(struct iscsi_conn *conn, struct iscsi_cmd *cmd)
padding = -(cmd->se_cmd.scsi_sense_length) & 3;
hton24(hdr->dlength, (u32)cmd->se_cmd.scsi_sense_length);
sense_len = cmd->se_cmd.scsi_sense_length + padding;
pdu_len = cmd->se_cmd.scsi_sense_length + padding;
isert_cmd->sense_buf_dma = ib_dma_map_single(ib_dev,
(void *)cmd->sense_buffer, sense_len,
isert_cmd->pdu_buf_dma = ib_dma_map_single(ib_dev,
(void *)cmd->sense_buffer, pdu_len,
DMA_TO_DEVICE);
isert_cmd->sense_buf_len = sense_len;
tx_dsg->addr = isert_cmd->sense_buf_dma;
tx_dsg->length = sense_len;
isert_cmd->pdu_buf_len = pdu_len;
tx_dsg->addr = isert_cmd->pdu_buf_dma;
tx_dsg->length = pdu_len;
tx_dsg->lkey = isert_conn->conn_mr->lkey;
isert_cmd->tx_desc.num_sge = 2;
}
......@@ -1692,11 +1692,11 @@ isert_put_reject(struct iscsi_cmd *cmd, struct iscsi_conn *conn)
isert_init_tx_hdrs(isert_conn, &isert_cmd->tx_desc);
hton24(hdr->dlength, ISCSI_HDR_LEN);
isert_cmd->sense_buf_dma = ib_dma_map_single(ib_dev,
isert_cmd->pdu_buf_dma = ib_dma_map_single(ib_dev,
(void *)cmd->buf_ptr, ISCSI_HDR_LEN,
DMA_TO_DEVICE);
isert_cmd->sense_buf_len = ISCSI_HDR_LEN;
tx_dsg->addr = isert_cmd->sense_buf_dma;
isert_cmd->pdu_buf_len = ISCSI_HDR_LEN;
tx_dsg->addr = isert_cmd->pdu_buf_dma;
tx_dsg->length = ISCSI_HDR_LEN;
tx_dsg->lkey = isert_conn->conn_mr->lkey;
isert_cmd->tx_desc.num_sge = 2;
......
......@@ -61,8 +61,8 @@ struct isert_cmd {
uint32_t write_stag;
uint64_t read_va;
uint64_t write_va;
u64 sense_buf_dma;
u32 sense_buf_len;
u64 pdu_buf_dma;
u32 pdu_buf_len;
u32 read_va_off;
u32 write_va_off;
u32 rdma_wr_num;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册