Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 d8cacaa3 编写于 作者: M Maxime Ripard
浏览文件
操作

ARM: sunxi: DT: Fix lines over 80 characters 

A few lines in our DTSIs are over the 80 characters limit, making
checkpatch complain about that.

If possible (and relevant), wrap these lines to 80 characters.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
上级 c0c2eb24
隐藏空白更改
内联 并排
Showing with 91 addition and 51 deletion
arch/arm/boot/dts/sun4i-a10.dtsi
浏览文件 @ d8cacaa3
......@@ -61,7 +61,8 @@
ranges;
framebuffer@0 {
compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
<&ahb_gates 44>;
......@@ -69,7 +70,8 @@
};
framebuffer@1 {
compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
<&ahb_gates 44>, <&ahb_gates 46>;
......@@ -433,7 +435,8 @@
compatible = "allwinner,sun4i-a10-usb-clk";
reg = <0x01c200cc 0x4>;
clocks = <&pll6 1>;
clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
clock-output-names = "usb_ohci0", "usb_ohci1",
"usb_phy";
};
spi3_clk: clk@01c200d4 {
......@@ -779,7 +782,8 @@
};
mmc0_pins_a: mmc0@0 {
allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
allwinner,pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
allwinner,function = "mmc0";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
......
arch/arm/boot/dts/sun5i-a10s.dtsi
浏览文件 @ d8cacaa3
......@@ -62,7 +62,8 @@
ranges;
framebuffer@0 {
compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
<&ahb_gates 44>;
......@@ -84,13 +85,17 @@
compatible = "allwinner,sun5i-a10s-ahb-gates-clk";
reg = <0x01c20060 0x8>;
clocks = <&ahb>;
clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci",
"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
"ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram",
"ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
"ahb_spi2", "ahb_gps", "ahb_stimer", "ahb_ve",
"ahb_tve", "ahb_lcd", "ahb_csi", "ahb_hdmi",
"ahb_de_be", "ahb_de_fe", "ahb_iep", "ahb_mali400";
clock-output-names = "ahb_usbotg", "ahb_ehci",
"ahb_ohci", "ahb_ss", "ahb_dma",
"ahb_bist", "ahb_mmc0", "ahb_mmc1",
"ahb_mmc2", "ahb_nand",
"ahb_sdram", "ahb_emac", "ahb_ts",
"ahb_spi0", "ahb_spi1", "ahb_spi2",
"ahb_gps", "ahb_stimer", "ahb_ve",
"ahb_tve", "ahb_lcd", "ahb_csi",
"ahb_hdmi", "ahb_de_be",
"ahb_de_fe", "ahb_iep",
"ahb_mali400";
};
apb0_gates: clk@01c20068 {
......@@ -98,8 +103,9 @@
compatible = "allwinner,sun5i-a10s-apb0-gates-clk";
reg = <0x01c20068 0x4>;
clocks = <&apb0>;
clock-output-names = "apb0_codec", "apb0_iis", "apb0_pio",
"apb0_ir", "apb0_keypad";
clock-output-names = "apb0_codec", "apb0_iis",
"apb0_pio", "apb0_ir",
"apb0_keypad";
};
apb1_gates: clk@01c2006c {
......@@ -188,7 +194,8 @@
};
mmc1_pins_a: mmc1@0 {
allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8";
allwinner,pins = "PG3", "PG4", "PG5",
"PG6", "PG7", "PG8";
allwinner,function = "mmc1";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
......
arch/arm/boot/dts/sun5i-a13.dtsi
浏览文件 @ d8cacaa3
......@@ -104,12 +104,16 @@
compatible = "allwinner,sun5i-a13-ahb-gates-clk";
reg = <0x01c20060 0x8>;
clocks = <&ahb>;
clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci",
"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
"ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram",
"ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_stimer",
"ahb_ve", "ahb_lcd", "ahb_csi", "ahb_de_be",
"ahb_de_fe", "ahb_iep", "ahb_mali400";
clock-output-names = "ahb_usbotg", "ahb_ehci",
"ahb_ohci", "ahb_ss", "ahb_dma",
"ahb_bist", "ahb_mmc0", "ahb_mmc1",
"ahb_mmc2", "ahb_nand",
"ahb_sdram", "ahb_spi0",
"ahb_spi1", "ahb_spi2",
"ahb_stimer", "ahb_ve", "ahb_lcd",
"ahb_csi", "ahb_de_be",
"ahb_de_fe", "ahb_iep",
"ahb_mali400";
};
apb0_gates: clk@01c20068 {
......@@ -117,7 +121,8 @@
compatible = "allwinner,sun5i-a13-apb0-gates-clk";
reg = <0x01c20068 0x4>;
clocks = <&apb0>;
clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir";
clock-output-names = "apb0_codec", "apb0_pio",
"apb0_ir";
};
apb1_gates: clk@01c2006c {
......
arch/arm/boot/dts/sun5i.dtsi
浏览文件 @ d8cacaa3
......@@ -505,7 +505,8 @@
};
mmc0_pins_a: mmc0@0 {
allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
allwinner,pins = "PF0", "PF1", "PF2", "PF3",
"PF4", "PF5";
allwinner,function = "mmc0";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
......
arch/arm/boot/dts/sun6i-a31.dtsi
浏览文件 @ d8cacaa3
......@@ -62,7 +62,8 @@
ranges;
framebuffer@0 {
compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
clocks = <&pll6 0>;
status = "disabled";
......@@ -299,9 +300,10 @@
reg = <0x01c2006c 0x4>;
clocks = <&apb2>;
clock-output-names = "apb2_i2c0", "apb2_i2c1",
"apb2_i2c2", "apb2_i2c3", "apb2_uart0",
"apb2_uart1", "apb2_uart2", "apb2_uart3",
"apb2_uart4", "apb2_uart5";
"apb2_i2c2", "apb2_i2c3",
"apb2_uart0", "apb2_uart1",
"apb2_uart2", "apb2_uart3",
"apb2_uart4", "apb2_uart5";
};
mmc0_clk: clk@01c20088 {
......@@ -388,10 +390,13 @@
};
/*
* The following two are dummy clocks, placeholders used in the gmac_tx
* clock. The gmac driver will choose one parent depending on the PHY
* interface mode, using clk_set_rate auto-reparenting.
* The actual TX clock rate is not controlled by the gmac_tx clock.
* The following two are dummy clocks, placeholders
* used in the gmac_tx clock. The gmac driver will
* choose one parent depending on the PHY interface
* mode, using clk_set_rate auto-reparenting.
*
* The actual TX clock rate is not controlled by the
* gmac_tx clock.
*/
mii_phy_tx_clk: clk@1 {
#clock-cells = <0>;
......@@ -627,7 +632,8 @@
};
mmc0_pins_a: mmc0@0 {
allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
allwinner,pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
allwinner,function = "mmc0";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
......@@ -865,7 +871,8 @@
};
timer@01c60000 {
compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer";
compatible = "allwinner,sun6i-a31-hstimer",
"allwinner,sun7i-a20-hstimer";
reg = <0x01c60000 0x1000>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
......@@ -956,7 +963,8 @@
ar100: ar100_clk {
compatible = "allwinner,sun6i-a31-ar100-clk";
#clock-cells = <0>;
clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
clocks = <&osc32k>, <&osc24M>, <&pll6 0>,
<&pll6 0>;
clock-output-names = "ar100";
};
......
arch/arm/boot/dts/sun7i-a20.dtsi
浏览文件 @ d8cacaa3
......@@ -63,7 +63,8 @@
ranges;
framebuffer@0 {
compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
<&ahb_gates 44>;
......@@ -447,7 +448,8 @@
compatible = "allwinner,sun4i-a10-usb-clk";
reg = <0x01c200cc 0x4>;
clocks = <&pll6 1>;
clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
clock-output-names = "usb_ohci0", "usb_ohci1",
"usb_phy";
};
spi3_clk: clk@01c200d4 {
......@@ -467,10 +469,13 @@
};
/*
* The following two are dummy clocks, placeholders used in the gmac_tx
* clock. The gmac driver will choose one parent depending on the PHY
* interface mode, using clk_set_rate auto-reparenting.
* The actual TX clock rate is not controlled by the gmac_tx clock.
* The following two are dummy clocks, placeholders
* used in the gmac_tx clock. The gmac driver will
* choose one parent depending on the PHY interface
* mode, using clk_set_rate auto-reparenting.
*
* The actual TX clock rate is not controlled by the
* gmac_tx clock.
*/
mii_phy_tx_clk: clk@2 {
#clock-cells = <0>;
......@@ -968,7 +973,8 @@
};
mmc0_pins_a: mmc0@0 {
allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
allwinner,pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
allwinner,function = "mmc0";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
......@@ -982,14 +988,16 @@
};
mmc2_pins_a: mmc2@0 {
allwinner,pins = "PC6","PC7","PC8","PC9","PC10","PC11";
allwinner,pins = "PC6", "PC7", "PC8",
"PC9", "PC10", "PC11";
allwinner,function = "mmc2";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
mmc3_pins_a: mmc3@0 {
allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9";
allwinner,pins = "PI4", "PI5", "PI6",
"PI7", "PI8", "PI9";
allwinner,function = "mmc3";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
......@@ -1187,7 +1195,8 @@
};
i2c0: i2c@01c2ac00 {
compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
compatible = "allwinner,sun7i-a20-i2c",
"allwinner,sun4i-a10-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 0>;
......@@ -1197,7 +1206,8 @@
};
i2c1: i2c@01c2b000 {
compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
compatible = "allwinner,sun7i-a20-i2c",
"allwinner,sun4i-a10-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 1>;
......@@ -1207,7 +1217,8 @@
};
i2c2: i2c@01c2b400 {
compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
compatible = "allwinner,sun7i-a20-i2c",
"allwinner,sun4i-a10-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 2>;
......@@ -1217,7 +1228,8 @@
};
i2c3: i2c@01c2b800 {
compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
compatible = "allwinner,sun7i-a20-i2c",
"allwinner,sun4i-a10-i2c";
reg = <0x01c2b800 0x400>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 3>;
......@@ -1227,7 +1239,8 @@
};
i2c4: i2c@01c2c000 {
compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
compatible = "allwinner,sun7i-a20-i2c",
"allwinner,sun4i-a10-i2c";
reg = <0x01c2c000 0x400>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 15>;
......
arch/arm/boot/dts/sun8i-a23.dtsi
浏览文件 @ d8cacaa3
......@@ -355,14 +355,16 @@
};
mmc0_pins_a: mmc0@0 {
allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
allwinner,pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
allwinner,function = "mmc0";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc1_pins_a: mmc1@0 {
allwinner,pins = "PG0","PG1","PG2","PG3","PG4","PG5";
allwinner,pins = "PG0", "PG1", "PG2",
"PG3", "PG4", "PG5";
allwinner,function = "mmc1";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
......
arch/arm/boot/dts/sun9i-a80.dtsi
浏览文件 @ d8cacaa3
......@@ -284,7 +284,7 @@
"ahb0_ss", "ahb0_sd", "ahb0_nand1",
"ahb0_nand0", "ahb0_sdram",
"ahb0_mipi_hsi", "ahb0_sata", "ahb0_ts",
"ahb0_spi0","ahb0_spi1", "ahb0_spi2",
"ahb0_spi0", "ahb0_spi1", "ahb0_spi2",
"ahb0_spi3";
};
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或