提交 d8471ad3 编写于 作者: R Robert Richter

oprofile: Introduce op_x86_phys_to_virt()

This new function translates physical to virtual counter numbers.
Signed-off-by: NRobert Richter <robert.richter@amd.com>
上级 a5659d17
......@@ -27,12 +27,6 @@
#include "op_counter.h"
#include "op_x86_model.h"
#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
DEFINE_PER_CPU(int, switch_index);
#endif
static struct op_x86_model_spec const *model;
static DEFINE_PER_CPU(struct op_msrs, cpu_msrs);
static DEFINE_PER_CPU(unsigned long, saved_lvtpc);
......@@ -103,6 +97,21 @@ static void nmi_cpu_save_registers(struct op_msrs *msrs)
}
}
#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
static DEFINE_PER_CPU(int, switch_index);
inline int op_x86_phys_to_virt(int phys)
{
return __get_cpu_var(switch_index) + phys;
}
#else
inline int op_x86_phys_to_virt(int phys) { return phys; }
#endif
static void free_msrs(void)
{
int i;
......@@ -248,31 +257,25 @@ static int nmi_setup(void)
static void nmi_cpu_save_mpx_registers(struct op_msrs *msrs)
{
unsigned int si = __get_cpu_var(switch_index);
struct op_msr *multiplex = msrs->multiplex;
unsigned int i;
int i;
for (i = 0; i < model->num_counters; ++i) {
int offset = i + si;
if (multiplex[offset].addr) {
rdmsrl(multiplex[offset].addr,
multiplex[offset].saved);
}
int virt = op_x86_phys_to_virt(i);
if (multiplex[virt].addr)
rdmsrl(multiplex[virt].addr, multiplex[virt].saved);
}
}
static void nmi_cpu_restore_mpx_registers(struct op_msrs *msrs)
{
unsigned int si = __get_cpu_var(switch_index);
struct op_msr *multiplex = msrs->multiplex;
unsigned int i;
int i;
for (i = 0; i < model->num_counters; ++i) {
int offset = i + si;
if (multiplex[offset].addr) {
wrmsrl(multiplex[offset].addr,
multiplex[offset].saved);
}
int virt = op_x86_phys_to_virt(i);
if (multiplex[virt].addr)
wrmsrl(multiplex[virt].addr, multiplex[virt].saved);
}
}
......
......@@ -42,9 +42,6 @@
#define MSR_AMD_EVENTSEL_RESERVED ((0xFFFFFCF0ULL<<32)|(1ULL<<21))
static unsigned long reset_value[NUM_VIRT_COUNTERS];
#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
DECLARE_PER_CPU(int, switch_index);
#endif
#ifdef CONFIG_OPROFILE_IBS
......@@ -141,21 +138,20 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
/* enable active counters */
for (i = 0; i < NUM_COUNTERS; ++i) {
#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
int offset = i + __get_cpu_var(switch_index);
#else
int offset = i;
#endif
if (counter_config[offset].enabled && msrs->counters[i].addr) {
/* setup counter registers */
wrmsrl(msrs->counters[i].addr, -(u64)reset_value[offset]);
/* setup control registers */
rdmsrl(msrs->controls[i].addr, val);
val &= model->reserved;
val |= op_x86_get_ctrl(model, &counter_config[offset]);
wrmsrl(msrs->controls[i].addr, val);
}
int virt = op_x86_phys_to_virt(i);
if (!counter_config[virt].enabled)
continue;
if (!msrs->counters[i].addr)
continue;
/* setup counter registers */
wrmsrl(msrs->counters[i].addr, -(u64)reset_value[virt]);
/* setup control registers */
rdmsrl(msrs->controls[i].addr, val);
val &= model->reserved;
val |= op_x86_get_ctrl(model, &counter_config[virt]);
wrmsrl(msrs->controls[i].addr, val);
}
}
......@@ -170,14 +166,13 @@ static void op_amd_switch_ctrl(struct op_x86_model_spec const *model,
/* enable active counters */
for (i = 0; i < NUM_COUNTERS; ++i) {
int offset = i + __get_cpu_var(switch_index);
if (counter_config[offset].enabled) {
/* setup control registers */
rdmsrl(msrs->controls[i].addr, val);
val &= model->reserved;
val |= op_x86_get_ctrl(model, &counter_config[offset]);
wrmsrl(msrs->controls[i].addr, val);
}
int virt = op_x86_phys_to_virt(i);
if (!counter_config[virt].enabled)
continue;
rdmsrl(msrs->controls[i].addr, val);
val &= model->reserved;
val |= op_x86_get_ctrl(model, &counter_config[virt]);
wrmsrl(msrs->controls[i].addr, val);
}
}
......@@ -292,19 +287,15 @@ static int op_amd_check_ctrs(struct pt_regs * const regs,
int i;
for (i = 0; i < NUM_COUNTERS; ++i) {
#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
int offset = i + __get_cpu_var(switch_index);
#else
int offset = i;
#endif
if (!reset_value[offset])
int virt = op_x86_phys_to_virt(i);
if (!reset_value[virt])
continue;
rdmsrl(msrs->counters[i].addr, val);
/* bit is clear if overflowed: */
if (val & OP_CTR_OVERFLOW)
continue;
oprofile_add_sample(regs, offset);
wrmsrl(msrs->counters[i].addr, -(u64)reset_value[offset]);
oprofile_add_sample(regs, virt);
wrmsrl(msrs->counters[i].addr, -(u64)reset_value[virt]);
}
op_amd_handle_ibs(regs, msrs);
......@@ -319,16 +310,11 @@ static void op_amd_start(struct op_msrs const * const msrs)
int i;
for (i = 0; i < NUM_COUNTERS; ++i) {
#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
int offset = i + __get_cpu_var(switch_index);
#else
int offset = i;
#endif
if (reset_value[offset]) {
rdmsrl(msrs->controls[i].addr, val);
val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
wrmsrl(msrs->controls[i].addr, val);
}
if (!reset_value[op_x86_phys_to_virt(i)])
continue;
rdmsrl(msrs->controls[i].addr, val);
val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
wrmsrl(msrs->controls[i].addr, val);
}
op_amd_start_ibs();
......@@ -344,11 +330,7 @@ static void op_amd_stop(struct op_msrs const * const msrs)
* pm callback
*/
for (i = 0; i < NUM_COUNTERS; ++i) {
#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
if (!reset_value[i + per_cpu(switch_index, smp_processor_id())])
#else
if (!reset_value[i])
#endif
if (!reset_value[op_x86_phys_to_virt(i)])
continue;
rdmsrl(msrs->controls[i].addr, val);
val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
......
......@@ -60,6 +60,7 @@ struct op_counter_config;
extern u64 op_x86_get_ctrl(struct op_x86_model_spec const *model,
struct op_counter_config *counter_config);
extern int op_x86_phys_to_virt(int phys);
extern struct op_x86_model_spec const op_ppro_spec;
extern struct op_x86_model_spec const op_p4_spec;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册