提交 d81e27cf 编写于 作者: J Joe Perches 提交者: David S. Miller

drivers/net/skfp: Remove pr_<level> uses of KERN_<level>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 70ce679b
......@@ -209,7 +209,7 @@ static int skfp_init_one(struct pci_dev *pdev,
void __iomem *mem;
int err;
pr_debug(KERN_INFO "entering skfp_init_one\n");
pr_debug("entering skfp_init_one\n");
if (num_boards == 0)
printk("%s\n", boot_msg);
......@@ -385,7 +385,7 @@ static int skfp_driver_init(struct net_device *dev)
skfddi_priv *bp = &smc->os;
int err = -EIO;
pr_debug(KERN_INFO "entering skfp_driver_init\n");
pr_debug("entering skfp_driver_init\n");
// set the io address in private structures
bp->base_addr = dev->base_addr;
......@@ -405,7 +405,7 @@ static int skfp_driver_init(struct net_device *dev)
// Determine the required size of the 'shared' memory area.
bp->SharedMemSize = mac_drv_check_space();
pr_debug(KERN_INFO "Memory for HWM: %ld\n", bp->SharedMemSize);
pr_debug("Memory for HWM: %ld\n", bp->SharedMemSize);
if (bp->SharedMemSize > 0) {
bp->SharedMemSize += 16; // for descriptor alignment
......@@ -429,13 +429,13 @@ static int skfp_driver_init(struct net_device *dev)
card_stop(smc); // Reset adapter.
pr_debug(KERN_INFO "mac_drv_init()..\n");
pr_debug("mac_drv_init()..\n");
if (mac_drv_init(smc) != 0) {
pr_debug(KERN_INFO "mac_drv_init() failed.\n");
pr_debug("mac_drv_init() failed\n");
goto fail;
}
read_address(smc, NULL);
pr_debug(KERN_INFO "HW-Addr: %pMF\n", smc->hw.fddi_canon_addr.a);
pr_debug("HW-Addr: %pMF\n", smc->hw.fddi_canon_addr.a);
memcpy(dev->dev_addr, smc->hw.fddi_canon_addr.a, 6);
smt_reset_defaults(smc, 0);
......@@ -485,7 +485,7 @@ static int skfp_open(struct net_device *dev)
struct s_smc *smc = netdev_priv(dev);
int err;
pr_debug(KERN_INFO "entering skfp_open\n");
pr_debug("entering skfp_open\n");
/* Register IRQ - support shared interrupts by passing device ptr */
err = request_irq(dev->irq, skfp_interrupt, IRQF_SHARED,
dev->name, dev);
......@@ -856,12 +856,12 @@ static void skfp_ctl_set_multicast_list_wo_lock(struct net_device *dev)
/* Enable promiscuous mode, if necessary */
if (dev->flags & IFF_PROMISC) {
mac_drv_rx_mode(smc, RX_ENABLE_PROMISC);
pr_debug(KERN_INFO "PROMISCUOUS MODE ENABLED\n");
pr_debug("PROMISCUOUS MODE ENABLED\n");
}
/* Else, update multicast address table */
else {
mac_drv_rx_mode(smc, RX_DISABLE_PROMISC);
pr_debug(KERN_INFO "PROMISCUOUS MODE DISABLED\n");
pr_debug("PROMISCUOUS MODE DISABLED\n");
// Reset all MC addresses
mac_clear_multicast(smc);
......@@ -869,7 +869,7 @@ static void skfp_ctl_set_multicast_list_wo_lock(struct net_device *dev)
if (dev->flags & IFF_ALLMULTI) {
mac_drv_rx_mode(smc, RX_ENABLE_ALLMULTI);
pr_debug(KERN_INFO "ENABLE ALL MC ADDRESSES\n");
pr_debug("ENABLE ALL MC ADDRESSES\n");
} else if (!netdev_mc_empty(dev)) {
if (netdev_mc_count(dev) <= FPMAX_MULTICAST) {
/* use exact filtering */
......@@ -880,18 +880,18 @@ static void skfp_ctl_set_multicast_list_wo_lock(struct net_device *dev)
(struct fddi_addr *)ha->addr,
1);
pr_debug(KERN_INFO "ENABLE MC ADDRESS: %pMF\n",
ha->addr);
pr_debug("ENABLE MC ADDRESS: %pMF\n",
ha->addr);
}
} else { // more MC addresses than HW supports
mac_drv_rx_mode(smc, RX_ENABLE_ALLMULTI);
pr_debug(KERN_INFO "ENABLE ALL MC ADDRESSES\n");
pr_debug("ENABLE ALL MC ADDRESSES\n");
}
} else { // no MC addresses
pr_debug(KERN_INFO "DISABLE ALL MC ADDRESSES\n");
pr_debug("DISABLE ALL MC ADDRESSES\n");
}
/* Update adapter filters */
......@@ -1045,7 +1045,7 @@ static netdev_tx_t skfp_send_pkt(struct sk_buff *skb,
struct s_smc *smc = netdev_priv(dev);
skfddi_priv *bp = &smc->os;
pr_debug(KERN_INFO "skfp_send_pkt\n");
pr_debug("skfp_send_pkt\n");
/*
* Verify that incoming transmit request is OK
......@@ -1114,13 +1114,13 @@ static void send_queued_packets(struct s_smc *smc)
int frame_status; // HWM tx frame status.
pr_debug(KERN_INFO "send queued packets\n");
pr_debug("send queued packets\n");
for (;;) {
// send first buffer from queue
skb = skb_dequeue(&bp->SendSkbQueue);
if (!skb) {
pr_debug(KERN_INFO "queue empty\n");
pr_debug("queue empty\n");
return;
} // queue empty !
......@@ -1232,7 +1232,7 @@ static void CheckSourceAddress(unsigned char *frame, unsigned char *hw_addr)
static void ResetAdapter(struct s_smc *smc)
{
pr_debug(KERN_INFO "[fddi: ResetAdapter]\n");
pr_debug("[fddi: ResetAdapter]\n");
// Stop the adapter.
......@@ -1278,7 +1278,7 @@ void llc_restart_tx(struct s_smc *smc)
{
skfddi_priv *bp = &smc->os;
pr_debug(KERN_INFO "[llc_restart_tx]\n");
pr_debug("[llc_restart_tx]\n");
// Try to send queued packets
spin_unlock(&bp->DriverLock);
......@@ -1308,7 +1308,7 @@ void *mac_drv_get_space(struct s_smc *smc, unsigned int size)
{
void *virt;
pr_debug(KERN_INFO "mac_drv_get_space (%d bytes), ", size);
pr_debug("mac_drv_get_space (%d bytes), ", size);
virt = (void *) (smc->os.SharedMemAddr + smc->os.SharedMemHeap);
if ((smc->os.SharedMemHeap + size) > smc->os.SharedMemSize) {
......@@ -1317,9 +1317,9 @@ void *mac_drv_get_space(struct s_smc *smc, unsigned int size)
}
smc->os.SharedMemHeap += size; // Move heap pointer.
pr_debug(KERN_INFO "mac_drv_get_space end\n");
pr_debug(KERN_INFO "virt addr: %lx\n", (ulong) virt);
pr_debug(KERN_INFO "bus addr: %lx\n", (ulong)
pr_debug("mac_drv_get_space end\n");
pr_debug("virt addr: %lx\n", (ulong) virt);
pr_debug("bus addr: %lx\n", (ulong)
(smc->os.SharedMemDMA +
((char *) virt - (char *)smc->os.SharedMemAddr)));
return (virt);
......@@ -1349,7 +1349,7 @@ void *mac_drv_get_desc_mem(struct s_smc *smc, unsigned int size)
char *virt;
pr_debug(KERN_INFO "mac_drv_get_desc_mem\n");
pr_debug("mac_drv_get_desc_mem\n");
// Descriptor memory must be aligned on 16-byte boundary.
......@@ -1493,7 +1493,7 @@ void mac_drv_tx_complete(struct s_smc *smc, volatile struct s_smt_fp_txd *txd)
{
struct sk_buff *skb;
pr_debug(KERN_INFO "entering mac_drv_tx_complete\n");
pr_debug("entering mac_drv_tx_complete\n");
// Check if this TxD points to a skb
if (!(skb = txd->txd_os.skb)) {
......@@ -1513,7 +1513,7 @@ void mac_drv_tx_complete(struct s_smc *smc, volatile struct s_smt_fp_txd *txd)
// free the skb
dev_kfree_skb_irq(skb);
pr_debug(KERN_INFO "leaving mac_drv_tx_complete\n");
pr_debug("leaving mac_drv_tx_complete\n");
} // mac_drv_tx_complete
......@@ -1580,7 +1580,7 @@ void mac_drv_rx_complete(struct s_smc *smc, volatile struct s_smt_fp_rxd *rxd,
unsigned short ri;
u_int RifLength;
pr_debug(KERN_INFO "entering mac_drv_rx_complete (len=%d)\n", len);
pr_debug("entering mac_drv_rx_complete (len=%d)\n", len);
if (frag_count != 1) { // This is not allowed to happen.
printk("fddi: Multi-fragment receive!\n");
......@@ -1589,7 +1589,7 @@ void mac_drv_rx_complete(struct s_smc *smc, volatile struct s_smt_fp_rxd *rxd,
}
skb = rxd->rxd_os.skb;
if (!skb) {
pr_debug(KERN_INFO "No skb in rxd\n");
pr_debug("No skb in rxd\n");
smc->os.MacStat.gen.rx_errors++;
goto RequeueRxd;
}
......@@ -1619,7 +1619,7 @@ void mac_drv_rx_complete(struct s_smc *smc, volatile struct s_smt_fp_rxd *rxd,
else {
int n;
// goos: RIF removal has still to be tested
pr_debug(KERN_INFO "RIF found\n");
pr_debug("RIF found\n");
// Get RIF length from Routing Control (RC) field.
cp = virt + FDDI_MAC_HDR_LEN; // Point behind MAC header.
......@@ -1664,7 +1664,7 @@ void mac_drv_rx_complete(struct s_smc *smc, volatile struct s_smt_fp_rxd *rxd,
return;
RequeueRxd:
pr_debug(KERN_INFO "Rx: re-queue RXD.\n");
pr_debug("Rx: re-queue RXD.\n");
mac_drv_requeue_rxd(smc, rxd, frag_count);
smc->os.MacStat.gen.rx_errors++; // Count receive packets
// not indicated.
......@@ -1775,7 +1775,7 @@ void mac_drv_fill_rxd(struct s_smc *smc)
struct sk_buff *skb;
volatile struct s_smt_fp_rxd *rxd;
pr_debug(KERN_INFO "entering mac_drv_fill_rxd\n");
pr_debug("entering mac_drv_fill_rxd\n");
// Walk through the list of free receive buffers, passing receive
// buffers to the HWM as long as RXDs are available.
......@@ -1783,7 +1783,7 @@ void mac_drv_fill_rxd(struct s_smc *smc)
MaxFrameSize = smc->os.MaxFrameSize;
// Check if there is any RXD left.
while (HWM_GET_RX_FREE(smc) > 0) {
pr_debug(KERN_INFO ".\n");
pr_debug(".\n");
rxd = HWM_GET_CURR_RXD(smc);
skb = alloc_skb(MaxFrameSize + 3, GFP_ATOMIC);
......@@ -1814,7 +1814,7 @@ void mac_drv_fill_rxd(struct s_smc *smc)
hwm_rx_frag(smc, v_addr, b_addr, MaxFrameSize,
FIRST_FRAG | LAST_FRAG);
}
pr_debug(KERN_INFO "leaving mac_drv_fill_rxd\n");
pr_debug("leaving mac_drv_fill_rxd\n");
} // mac_drv_fill_rxd
......@@ -2034,17 +2034,17 @@ void smt_stat_counter(struct s_smc *smc, int stat)
{
// BOOLEAN RingIsUp ;
pr_debug(KERN_INFO "smt_stat_counter\n");
pr_debug("smt_stat_counter\n");
switch (stat) {
case 0:
pr_debug(KERN_INFO "Ring operational change.\n");
pr_debug("Ring operational change.\n");
break;
case 1:
pr_debug(KERN_INFO "Receive fifo overflow.\n");
pr_debug("Receive fifo overflow.\n");
smc->os.MacStat.gen.rx_errors++;
break;
default:
pr_debug(KERN_INFO "Unknown status (%d).\n", stat);
pr_debug("Unknown status (%d).\n", stat);
break;
}
} // smt_stat_counter
......@@ -2100,10 +2100,10 @@ void cfm_state_change(struct s_smc *smc, int c_state)
s = "SC11_C_WRAP_S";
break;
default:
pr_debug(KERN_INFO "cfm_state_change: unknown %d\n", c_state);
pr_debug("cfm_state_change: unknown %d\n", c_state);
return;
}
pr_debug(KERN_INFO "cfm_state_change: %s\n", s);
pr_debug("cfm_state_change: %s\n", s);
#endif // DRIVERDEBUG
} // cfm_state_change
......@@ -2158,7 +2158,7 @@ void ecm_state_change(struct s_smc *smc, int e_state)
s = "unknown";
break;
}
pr_debug(KERN_INFO "ecm_state_change: %s\n", s);
pr_debug("ecm_state_change: %s\n", s);
#endif //DRIVERDEBUG
} // ecm_state_change
......@@ -2213,7 +2213,7 @@ void rmt_state_change(struct s_smc *smc, int r_state)
s = "unknown";
break;
}
pr_debug(KERN_INFO "[rmt_state_change: %s]\n", s);
pr_debug("[rmt_state_change: %s]\n", s);
#endif // DRIVERDEBUG
} // rmt_state_change
......@@ -2233,7 +2233,7 @@ void rmt_state_change(struct s_smc *smc, int r_state)
************************/
void drv_reset_indication(struct s_smc *smc)
{
pr_debug(KERN_INFO "entering drv_reset_indication\n");
pr_debug("entering drv_reset_indication\n");
smc->os.ResetRequested = TRUE; // Set flag.
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册