usb: dwc3: gadget: rename phy_power() to phy_suspend()

those two functions don't power PHYs, they simply
put them in suspend state. Rename to reflect better
what functions actually do.
Signed-off-by: NPaul Zimmerman <paulz@synopsys.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

drivers/usb/dwc3/gadget.c

@@ -1894,30 +1894,30 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
 	dwc->setup_packet_pending = false;
 }
 
-static void dwc3_gadget_usb3_phy_power(struct dwc3 *dwc, int on)
+static void dwc3_gadget_usb3_phy_suspend(struct dwc3 *dwc, int suspend)
 {
 	u32			reg;
 
 	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
 
-	if (on)
-		reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
-	else
+	if (suspend)
 		reg |= DWC3_GUSB3PIPECTL_SUSPHY;
+	else
+		reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
 
 	dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
 }
 
-static void dwc3_gadget_usb2_phy_power(struct dwc3 *dwc, int on)
+static void dwc3_gadget_usb2_phy_suspend(struct dwc3 *dwc, int suspend)
 {
 	u32			reg;
 
 	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
 
-	if (on)
-		reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
-	else
+	if (suspend)
 		reg |= DWC3_GUSB2PHYCFG_SUSPHY;
+	else
+		reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
 
 	dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
 }
@@ -1962,9 +1962,9 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
 	/* after reset -> Default State */
 	dwc->dev_state = DWC3_DEFAULT_STATE;
 
-	/* Enable PHYs */
-	dwc3_gadget_usb2_phy_power(dwc, true);
-	dwc3_gadget_usb3_phy_power(dwc, true);
+	/* Resume PHYs */
+	dwc3_gadget_usb2_phy_suspend(dwc, false);
+	dwc3_gadget_usb3_phy_suspend(dwc, false);
 
 	if (dwc->gadget.speed != USB_SPEED_UNKNOWN)
 		dwc3_disconnect_gadget(dwc);
@@ -2010,16 +2010,16 @@ static void dwc3_update_ram_clk_sel(struct dwc3 *dwc, u32 speed)
 	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
 }
 
-static void dwc3_gadget_disable_phy(struct dwc3 *dwc, u8 speed)
+static void dwc3_gadget_phy_suspend(struct dwc3 *dwc, u8 speed)
 {
 	switch (speed) {
 	case USB_SPEED_SUPER:
-		dwc3_gadget_usb2_phy_power(dwc, false);
+		dwc3_gadget_usb2_phy_suspend(dwc, true);
 		break;
 	case USB_SPEED_HIGH:
 	case USB_SPEED_FULL:
 	case USB_SPEED_LOW:
-		dwc3_gadget_usb3_phy_power(dwc, false);
+		dwc3_gadget_usb3_phy_suspend(dwc, true);
 		break;
 	}
 }
@@ -2082,8 +2082,8 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
 		break;
 	}
 
-	/* Disable unneded PHY */
-	dwc3_gadget_disable_phy(dwc, dwc->gadget.speed);
+	/* Suspend unneded PHY */
+	dwc3_gadget_phy_suspend(dwc, dwc->gadget.speed);
 
 	dep = dwc->eps[0];
 	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL);