[SCSI] isci: debug, provide state-enum-to-string conversions

Debugging the driver requires tracing the state transtions and tracing
state names is less work than decoding numbers.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

drivers/scsi/isci/phy.c

@@ -59,6 +59,16 @@
 #include "scu_event_codes.h"
 #include "probe_roms.h"
 
+#undef C
+#define C(a) (#a)
+static const char *phy_state_name(enum sci_phy_states state)
+{
+	static const char * const strings[] = PHY_STATES;
+
+	return strings[state];
+}
+#undef C
+
 /* Maximum arbitration wait time in micro-seconds */
 #define SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME  (700)
 
@@ -454,8 +464,8 @@ enum sci_status sci_phy_start(struct isci_phy *iphy)
 	enum sci_phy_states state = iphy->sm.current_state_id;
 
 	if (state != SCI_PHY_STOPPED) {
-		dev_dbg(sciphy_to_dev(iphy),
-			 "%s: in wrong state: %d\n", __func__, state);
+		dev_dbg(sciphy_to_dev(iphy), "%s: in wrong state: %s\n",
+			__func__, phy_state_name(state));
 		return SCI_FAILURE_INVALID_STATE;
 	}
 
@@ -480,8 +490,8 @@ enum sci_status sci_phy_stop(struct isci_phy *iphy)
 	case SCI_PHY_READY:
 		break;
 	default:
-		dev_dbg(sciphy_to_dev(iphy),
-			"%s: in wrong state: %d\n", __func__, state);
+		dev_dbg(sciphy_to_dev(iphy), "%s: in wrong state: %s\n",
+			__func__, phy_state_name(state));
 		return SCI_FAILURE_INVALID_STATE;
 	}
 
@@ -494,8 +504,8 @@ enum sci_status sci_phy_reset(struct isci_phy *iphy)
 	enum sci_phy_states state = iphy->sm.current_state_id;
 
 	if (state != SCI_PHY_READY) {
-		dev_dbg(sciphy_to_dev(iphy),
-			"%s: in wrong state: %d\n", __func__, state);
+		dev_dbg(sciphy_to_dev(iphy), "%s: in wrong state: %s\n",
+			__func__, phy_state_name(state));
 		return SCI_FAILURE_INVALID_STATE;
 	}
 
@@ -544,8 +554,8 @@ enum sci_status sci_phy_consume_power_handler(struct isci_phy *iphy)
 		return SCI_SUCCESS;
 	}
 	default:
-		dev_dbg(sciphy_to_dev(iphy),
-			"%s: in wrong state: %d\n", __func__, state);
+		dev_dbg(sciphy_to_dev(iphy), "%s: in wrong state: %s\n",
+			__func__, phy_state_name(state));
 		return SCI_FAILURE_INVALID_STATE;
 	}
 }
@@ -870,8 +880,8 @@ enum sci_status sci_phy_event_handler(struct isci_phy *iphy, u32 event_code)
 		}
 		return SCI_SUCCESS;
 	default:
-		dev_dbg(sciphy_to_dev(iphy),
-			"%s: in wrong state: %d\n", __func__, state);
+		dev_dbg(sciphy_to_dev(iphy), "%s: in wrong state: %s\n",
+			__func__, phy_state_name(state));
 		return SCI_FAILURE_INVALID_STATE;
 	}
 }
@@ -964,8 +974,8 @@ enum sci_status sci_phy_frame_handler(struct isci_phy *iphy, u32 frame_index)
 		return result;
 	}
 	default:
-		dev_dbg(sciphy_to_dev(iphy),
-			"%s: in wrong state: %d\n", __func__, state);
+		dev_dbg(sciphy_to_dev(iphy), "%s: in wrong state: %s\n",
+			__func__, phy_state_name(state));
 		return SCI_FAILURE_INVALID_STATE;
 	}
 

drivers/scsi/isci/phy.h

@@ -343,101 +343,65 @@ enum sci_phy_counter_id {
 	SCIC_PHY_COUNTER_SN_DWORD_SYNC_ERROR
 };
 
-enum sci_phy_states {
-	/**
-	 * Simply the initial state for the base domain state machine.
-	 */
-	SCI_PHY_INITIAL,
-
-	/**
-	 * This state indicates that the phy has successfully been stopped.
-	 * In this state no new IO operations are permitted on this phy.
-	 * This state is entered from the INITIAL state.
-	 * This state is entered from the STARTING state.
-	 * This state is entered from the READY state.
-	 * This state is entered from the RESETTING state.
-	 */
-	SCI_PHY_STOPPED,
-
-	/**
-	 * This state indicates that the phy is in the process of becomming
-	 * ready.  In this state no new IO operations are permitted on this phy.
-	 * This state is entered from the STOPPED state.
-	 * This state is entered from the READY state.
-	 * This state is entered from the RESETTING state.
-	 */
-	SCI_PHY_STARTING,
-
-	/**
-	 * Initial state
-	 */
-	SCI_PHY_SUB_INITIAL,
-
-	/**
-	 * Wait state for the hardware OSSP event type notification
-	 */
-	SCI_PHY_SUB_AWAIT_OSSP_EN,
-
-	/**
-	 * Wait state for the PHY speed notification
-	 */
-	SCI_PHY_SUB_AWAIT_SAS_SPEED_EN,
-
-	/**
-	 * Wait state for the IAF Unsolicited frame notification
-	 */
-	SCI_PHY_SUB_AWAIT_IAF_UF,
-
-	/**
-	 * Wait state for the request to consume power
-	 */
-	SCI_PHY_SUB_AWAIT_SAS_POWER,
-
-	/**
-	 * Wait state for request to consume power
-	 */
-	SCI_PHY_SUB_AWAIT_SATA_POWER,
-
-	/**
-	 * Wait state for the SATA PHY notification
-	 */
-	SCI_PHY_SUB_AWAIT_SATA_PHY_EN,
-
-	/**
-	 * Wait for the SATA PHY speed notification
-	 */
-	SCI_PHY_SUB_AWAIT_SATA_SPEED_EN,
-
-	/**
-	 * Wait state for the SIGNATURE FIS unsolicited frame notification
-	 */
-	SCI_PHY_SUB_AWAIT_SIG_FIS_UF,
-
-	/**
-	 * Exit state for this state machine
-	 */
-	SCI_PHY_SUB_FINAL,
-
-	/**
-	 * This state indicates the the phy is now ready.  Thus, the user
-	 * is able to perform IO operations utilizing this phy as long as it
-	 * is currently part of a valid port.
-	 * This state is entered from the STARTING state.
-	 */
-	SCI_PHY_READY,
-
-	/**
-	 * This state indicates that the phy is in the process of being reset.
-	 * In this state no new IO operations are permitted on this phy.
-	 * This state is entered from the READY state.
-	 */
-	SCI_PHY_RESETTING,
-
-	/**
-	 * Simply the final state for the base phy state machine.
-	 */
-	SCI_PHY_FINAL,
-};
+/**
+ * enum sci_phy_states - phy state machine states
+ * @SCI_PHY_INITIAL: Simply the initial state for the base domain state
+ *		     machine.
+ * @SCI_PHY_STOPPED: phy has successfully been stopped.  In this state
+ *		     no new IO operations are permitted on this phy.
+ * @SCI_PHY_STARTING: the phy is in the process of becomming ready.  In
+ *		      this state no new IO operations are permitted on
+ *		      this phy.
+ * @SCI_PHY_SUB_INITIAL: Initial state
+ * @SCI_PHY_SUB_AWAIT_OSSP_EN: Wait state for the hardware OSSP event
+ *			       type notification
+ * @SCI_PHY_SUB_AWAIT_SAS_SPEED_EN: Wait state for the PHY speed
+ *				    notification
+ * @SCI_PHY_SUB_AWAIT_IAF_UF: Wait state for the IAF Unsolicited frame
+ *			      notification
+ * @SCI_PHY_SUB_AWAIT_SAS_POWER: Wait state for the request to consume
+ *				 power
+ * @SCI_PHY_SUB_AWAIT_SATA_POWER: Wait state for request to consume
+ *				  power
+ * @SCI_PHY_SUB_AWAIT_SATA_PHY_EN: Wait state for the SATA PHY
+ *				   notification
+ * @SCI_PHY_SUB_AWAIT_SATA_SPEED_EN: Wait for the SATA PHY speed
+ *				     notification
+ * @SCI_PHY_SUB_AWAIT_SIG_FIS_UF: Wait state for the SIGNATURE FIS
+ *				  unsolicited frame notification
+ * @SCI_PHY_SUB_FINAL: Exit state for this state machine
+ * @SCI_PHY_READY: phy is now ready.  Thus, the user is able to perform
+ *		   IO operations utilizing this phy as long as it is
+ *		   currently part of a valid port.  This state is
+ *		   entered from the STARTING state.
+ * @SCI_PHY_RESETTING: phy is in the process of being reset.  In this
+ *		       state no new IO operations are permitted on this
+ *		       phy.  This state is entered from the READY state.
+ * @SCI_PHY_FINAL: Simply the final state for the base phy state
+ *		   machine.
+ */
+#define PHY_STATES {\
+	C(PHY_INITIAL),\
+	C(PHY_STOPPED),\
+	C(PHY_STARTING),\
+	C(PHY_SUB_INITIAL),\
+	C(PHY_SUB_AWAIT_OSSP_EN),\
+	C(PHY_SUB_AWAIT_SAS_SPEED_EN),\
+	C(PHY_SUB_AWAIT_IAF_UF),\
+	C(PHY_SUB_AWAIT_SAS_POWER),\
+	C(PHY_SUB_AWAIT_SATA_POWER),\
+	C(PHY_SUB_AWAIT_SATA_PHY_EN),\
+	C(PHY_SUB_AWAIT_SATA_SPEED_EN),\
+	C(PHY_SUB_AWAIT_SIG_FIS_UF),\
+	C(PHY_SUB_FINAL),\
+	C(PHY_READY),\
+	C(PHY_RESETTING),\
+	C(PHY_FINAL),\
+	}
+#undef C
+#define C(a) SCI_##a
+enum sci_phy_states PHY_STATES;
+#undef C
 
 void sci_phy_construct(
 	struct isci_phy *iphy,

drivers/scsi/isci/port.c

@@ -60,6 +60,16 @@
 #define SCIC_SDS_PORT_HARD_RESET_TIMEOUT  (1000)
 #define SCU_DUMMY_INDEX    (0xFFFF)
 
+#undef C
+#define C(a) (#a)
+const char *port_state_name(enum sci_port_states state)
+{
+	static const char * const strings[] = PORT_STATES;
+
+	return strings[state];
+}
+#undef C
+
 static struct device *sciport_to_dev(struct isci_port *iport)
 {
 	int i = iport->physical_port_index;
@@ -1054,8 +1064,8 @@ enum sci_status sci_port_start(struct isci_port *iport)
 
 	state = iport->sm.current_state_id;
 	if (state != SCI_PORT_STOPPED) {
-		dev_warn(sciport_to_dev(iport),
-			 "%s: in wrong state: %d\n", __func__, state);
+		dev_warn(sciport_to_dev(iport), "%s: in wrong state: %s\n",
+			 __func__, port_state_name(state));
 		return SCI_FAILURE_INVALID_STATE;
 	}
 
@@ -1129,8 +1139,8 @@ enum sci_status sci_port_stop(struct isci_port *iport)
 					  SCI_PORT_STOPPING);
 		return SCI_SUCCESS;
 	default:
-		dev_warn(sciport_to_dev(iport),
-			 "%s: in wrong state: %d\n", __func__, state);
+		dev_warn(sciport_to_dev(iport), "%s: in wrong state: %s\n",
+			 __func__, port_state_name(state));
 		return SCI_FAILURE_INVALID_STATE;
 	}
 }
@@ -1144,8 +1154,8 @@ static enum sci_status sci_port_hard_reset(struct isci_port *iport, u32 timeout)
 
 	state = iport->sm.current_state_id;
 	if (state != SCI_PORT_SUB_OPERATIONAL) {
-		dev_warn(sciport_to_dev(iport),
-			 "%s: in wrong state: %d\n", __func__, state);
+		dev_warn(sciport_to_dev(iport), "%s: in wrong state: %s\n",
+			 __func__, port_state_name(state));
 		return SCI_FAILURE_INVALID_STATE;
 	}
 
@@ -1239,8 +1249,8 @@ enum sci_status sci_port_add_phy(struct isci_port *iport,
 					  SCI_PORT_SUB_CONFIGURING);
 		return SCI_SUCCESS;
 	default:
-		dev_warn(sciport_to_dev(iport),
-			 "%s: in wrong state: %d\n", __func__, state);
+		dev_warn(sciport_to_dev(iport), "%s: in wrong state: %s\n",
+			 __func__, port_state_name(state));
 		return SCI_FAILURE_INVALID_STATE;
 	}
 }
@@ -1289,8 +1299,8 @@ enum sci_status sci_port_remove_phy(struct isci_port *iport,
 					  SCI_PORT_SUB_CONFIGURING);
 		return SCI_SUCCESS;
 	default:
-		dev_warn(sciport_to_dev(iport),
-			 "%s: in wrong state: %d\n", __func__, state);
+		dev_warn(sciport_to_dev(iport), "%s: in wrong state: %s\n",
+			 __func__, port_state_name(state));
 		return SCI_FAILURE_INVALID_STATE;
 	}
 }
@@ -1332,8 +1342,8 @@ enum sci_status sci_port_link_up(struct isci_port *iport,
 		sci_port_general_link_up_handler(iport, iphy, PF_RESUME);
 		return SCI_SUCCESS;
 	default:
-		dev_warn(sciport_to_dev(iport),
-			 "%s: in wrong state: %d\n", __func__, state);
+		dev_warn(sciport_to_dev(iport), "%s: in wrong state: %s\n",
+			 __func__, port_state_name(state));
 		return SCI_FAILURE_INVALID_STATE;
 	}
 }
@@ -1362,8 +1372,8 @@ enum sci_status sci_port_link_down(struct isci_port *iport,
 		sci_port_deactivate_phy(iport, iphy, false);
 		return SCI_SUCCESS;
 	default:
-		dev_warn(sciport_to_dev(iport),
-			 "%s: in wrong state: %d\n", __func__, state);
+		dev_warn(sciport_to_dev(iport), "%s: in wrong state: %s\n",
+			 __func__, port_state_name(state));
 		return SCI_FAILURE_INVALID_STATE;
 	}
 }
@@ -1382,8 +1392,8 @@ enum sci_status sci_port_start_io(struct isci_port *iport,
 		iport->started_request_count++;
 		return SCI_SUCCESS;
 	default:
-		dev_warn(sciport_to_dev(iport),
-			 "%s: in wrong state: %d\n", __func__, state);
+		dev_warn(sciport_to_dev(iport), "%s: in wrong state: %s\n",
+			 __func__, port_state_name(state));
 		return SCI_FAILURE_INVALID_STATE;
 	}
 }
@@ -1397,8 +1407,8 @@ enum sci_status sci_port_complete_io(struct isci_port *iport,
 	state = iport->sm.current_state_id;
 	switch (state) {
 	case SCI_PORT_STOPPED:
-		dev_warn(sciport_to_dev(iport),
-			 "%s: in wrong state: %d\n", __func__, state);
+		dev_warn(sciport_to_dev(iport), "%s: in wrong state: %s\n",
+			 __func__, port_state_name(state));
 		return SCI_FAILURE_INVALID_STATE;
 	case SCI_PORT_STOPPING:
 		sci_port_decrement_request_count(iport);

drivers/scsi/isci/port.h

@@ -144,70 +144,47 @@ struct sci_port_properties {
 };
 
 /**
- * enum sci_port_states - This enumeration depicts all the states for the
- *    common port state machine.
- *
- *
+ * enum sci_port_states - port state machine states
+ * @SCI_PORT_STOPPED: port has successfully been stopped.  In this state
+ *		      no new IO operations are permitted.  This state is
+ *		      entered from the STOPPING state.
+ * @SCI_PORT_STOPPING: port is in the process of stopping.  In this
+ *		       state no new IO operations are permitted, but
+ *		       existing IO operations are allowed to complete.
+ *		       This state is entered from the READY state.
+ * @SCI_PORT_READY: port is now ready.  Thus, the user is able to
+ *		    perform IO operations on this port. This state is
+ *		    entered from the STARTING state.
+ * @SCI_PORT_SUB_WAITING: port is started and ready but has no active
+ *			  phys.
+ * @SCI_PORT_SUB_OPERATIONAL: port is started and ready and there is at
+ *			      least one phy operational.
+ * @SCI_PORT_SUB_CONFIGURING: port is started and there was an
+ *			      add/remove phy event.  This state is only
+ *			      used in Automatic Port Configuration Mode
+ *			      (APC)
+ * @SCI_PORT_RESETTING: port is in the process of performing a hard
+ *			reset.  Thus, the user is unable to perform IO
+ *			operations on this port.  This state is entered
+ *			from the READY state.
+ * @SCI_PORT_FAILED: port has failed a reset request.  This state is
+ *		     entered when a port reset request times out. This
+ *		     state is entered from the RESETTING state.
  */
-enum sci_port_states {
-	/**
-	 * This state indicates that the port has successfully been stopped.
-	 * In this state no new IO operations are permitted.
-	 * This state is entered from the STOPPING state.
-	 */
-	SCI_PORT_STOPPED,
-
-	/**
-	 * This state indicates that the port is in the process of stopping.
-	 * In this state no new IO operations are permitted, but existing IO
-	 * operations are allowed to complete.
-	 * This state is entered from the READY state.
-	 */
-	SCI_PORT_STOPPING,
-
-	/**
-	 * This state indicates the port is now ready.  Thus, the user is
-	 * able to perform IO operations on this port.
-	 * This state is entered from the STARTING state.
-	 */
-	SCI_PORT_READY,
-
-	/**
-	 * The substate where the port is started and ready but has no
-	 * active phys.
-	 */
-	SCI_PORT_SUB_WAITING,
-
-	/**
-	 * The substate where the port is started and ready and there is
-	 * at least one phy operational.
-	 */
-	SCI_PORT_SUB_OPERATIONAL,
-
-	/**
-	 * The substate where the port is started and there was an
-	 * add/remove phy event.  This state is only used in Automatic
-	 * Port Configuration Mode (APC)
-	 */
-	SCI_PORT_SUB_CONFIGURING,
-
-	/**
-	 * This state indicates the port is in the process of performing a hard
-	 * reset.  Thus, the user is unable to perform IO operations on this
-	 * port.
-	 * This state is entered from the READY state.
-	 */
-	SCI_PORT_RESETTING,
-
-	/**
-	 * This state indicates the port has failed a reset request.  This state
-	 * is entered when a port reset request times out.
-	 * This state is entered from the RESETTING state.
-	 */
-	SCI_PORT_FAILED,
-
-
-};
+#define PORT_STATES {\
+	C(PORT_STOPPED),\
+	C(PORT_STOPPING),\
+	C(PORT_READY),\
+	C(PORT_SUB_WAITING),\
+	C(PORT_SUB_OPERATIONAL),\
+	C(PORT_SUB_CONFIGURING),\
+	C(PORT_RESETTING),\
+	C(PORT_FAILED),\
+	}
+#undef C
+#define C(a) SCI_##a
+enum sci_port_states PORT_STATES;
+#undef C
 
 static inline void sci_port_decrement_request_count(struct isci_port *iport)
 {

drivers/scsi/isci/remote_device.c

@@ -62,6 +62,16 @@
 #include "scu_event_codes.h"
 #include "task.h"
 
+#undef C
+#define C(a) (#a)
+const char *dev_state_name(enum sci_remote_device_states state)
+{
+	static const char * const strings[] = REMOTE_DEV_STATES;
+
+	return strings[state];
+}
+#undef C
+
 /**
  * isci_remote_device_not_ready() - This function is called by the ihost when
  *    the remote device is not ready. We mark the isci device as ready (not
@@ -167,8 +177,8 @@ enum sci_status sci_remote_device_stop(struct isci_remote_device *idev,
 	case SCI_DEV_FAILED:
 	case SCI_DEV_FINAL:
 	default:
-		dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n",
-			 __func__, state);
+		dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %s\n",
+			 __func__, dev_state_name(state));
 		return SCI_FAILURE_INVALID_STATE;
 	case SCI_DEV_STOPPED:
 		return SCI_SUCCESS;
@@ -226,8 +236,8 @@ enum sci_status sci_remote_device_reset(struct isci_remote_device *idev)
 	case SCI_DEV_RESETTING:
 	case SCI_DEV_FINAL:
 	default:
-		dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n",
-			 __func__, state);
+		dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %s\n",
+			 __func__, dev_state_name(state));
 		return SCI_FAILURE_INVALID_STATE;
 	case SCI_DEV_READY:
 	case SCI_STP_DEV_IDLE:
@@ -246,8 +256,8 @@ enum sci_status sci_remote_device_reset_complete(struct isci_remote_device *idev
 	enum sci_remote_device_states state = sm->current_state_id;
 
 	if (state != SCI_DEV_RESETTING) {
-		dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n",
-			 __func__, state);
+		dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %s\n",
+			 __func__, dev_state_name(state));
 		return SCI_FAILURE_INVALID_STATE;
 	}
 
@@ -262,8 +272,8 @@ enum sci_status sci_remote_device_suspend(struct isci_remote_device *idev,
 	enum sci_remote_device_states state = sm->current_state_id;
 
 	if (state != SCI_STP_DEV_CMD) {
-		dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n",
-			 __func__, state);
+		dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %s\n",
+			 __func__, dev_state_name(state));
 		return SCI_FAILURE_INVALID_STATE;
 	}
 
@@ -287,8 +297,8 @@ enum sci_status sci_remote_device_frame_handler(struct isci_remote_device *idev,
 	case SCI_SMP_DEV_IDLE:
 	case SCI_DEV_FINAL:
 	default:
-		dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n",
-			 __func__, state);
+		dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %s\n",
+			 __func__, dev_state_name(state));
 		/* Return the frame back to the controller */
 		sci_controller_release_frame(ihost, frame_index);
 		return SCI_FAILURE_INVALID_STATE;
@@ -502,8 +512,8 @@ enum sci_status sci_remote_device_start_io(struct isci_host *ihost,
 	case SCI_DEV_RESETTING:
 	case SCI_DEV_FINAL:
 	default:
-		dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n",
-			 __func__, state);
+		dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %s\n",
+			 __func__, dev_state_name(state));
 		return SCI_FAILURE_INVALID_STATE;
 	case SCI_DEV_READY:
 		/* attempt to start an io request for this device object. The remote
@@ -637,8 +647,8 @@ enum sci_status sci_remote_device_complete_io(struct isci_host *ihost,
 	case SCI_DEV_FAILED:
 	case SCI_DEV_FINAL:
 	default:
-		dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n",
-			 __func__, state);
+		dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %s\n",
+			 __func__, dev_state_name(state));
 		return SCI_FAILURE_INVALID_STATE;
 	case SCI_DEV_READY:
 	case SCI_STP_DEV_AWAIT_RESET:
@@ -721,8 +731,8 @@ enum sci_status sci_remote_device_start_task(struct isci_host *ihost,
 	case SCI_DEV_RESETTING:
 	case SCI_DEV_FINAL:
 	default:
-		dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n",
-			 __func__, state);
+		dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %s\n",
+			 __func__, dev_state_name(state));
 		return SCI_FAILURE_INVALID_STATE;
 	case SCI_STP_DEV_IDLE:
 	case SCI_STP_DEV_CMD:
@@ -853,8 +863,8 @@ static enum sci_status sci_remote_device_destruct(struct isci_remote_device *ide
 	struct isci_host *ihost;
 
 	if (state != SCI_DEV_STOPPED) {
-		dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n",
-			 __func__, state);
+		dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %s\n",
+			 __func__, dev_state_name(state));
 		return SCI_FAILURE_INVALID_STATE;
 	}
 
@@ -1204,8 +1214,8 @@ static enum sci_status sci_remote_device_start(struct isci_remote_device *idev,
 	enum sci_status status;
 
 	if (state != SCI_DEV_STOPPED) {
-		dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n",
-			 __func__, state);
+		dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %s\n",
+			 __func__, dev_state_name(state));
 		return SCI_FAILURE_INVALID_STATE;
 	}
 

drivers/scsi/isci/remote_device.h

@@ -179,122 +179,101 @@ enum sci_status sci_remote_device_reset_complete(
 /**
  * enum sci_remote_device_states - This enumeration depicts all the states
  *    for the common remote device state machine.
+ * @SCI_DEV_INITIAL: Simply the initial state for the base remote device
+ * state machine.
  *
+ * @SCI_DEV_STOPPED: This state indicates that the remote device has
+ * successfully been stopped.  In this state no new IO operations are
+ * permitted.  This state is entered from the INITIAL state.  This state
+ * is entered from the STOPPING state.
  *
+ * @SCI_DEV_STARTING: This state indicates the the remote device is in
+ * the process of becoming ready (i.e. starting).  In this state no new
+ * IO operations are permitted.  This state is entered from the STOPPED
+ * state.
+ *
+ * @SCI_DEV_READY: This state indicates the remote device is now ready.
+ * Thus, the user is able to perform IO operations on the remote device.
+ * This state is entered from the STARTING state.
+ *
+ * @SCI_STP_DEV_IDLE: This is the idle substate for the stp remote
+ * device.  When there are no active IO for the device it is is in this
+ * state.
+ *
+ * @SCI_STP_DEV_CMD: This is the command state for for the STP remote
+ * device.  This state is entered when the device is processing a
+ * non-NCQ command.  The device object will fail any new start IO
+ * requests until this command is complete.
+ *
+ * @SCI_STP_DEV_NCQ: This is the NCQ state for the STP remote device.
+ * This state is entered when the device is processing an NCQ reuqest.
+ * It will remain in this state so long as there is one or more NCQ
+ * requests being processed.
+ *
+ * @SCI_STP_DEV_NCQ_ERROR: This is the NCQ error state for the STP
+ * remote device.  This state is entered when an SDB error FIS is
+ * received by the device object while in the NCQ state.  The device
+ * object will only accept a READ LOG command while in this state.
+ *
+ * @SCI_STP_DEV_ATAPI_ERROR: This is the ATAPI error state for the STP
+ * ATAPI remote device.  This state is entered when ATAPI device sends
+ * error status FIS without data while the device object is in CMD
+ * state.  A suspension event is expected in this state.  The device
+ * object will resume right away.
+ *
+ * @SCI_STP_DEV_AWAIT_RESET: This is the READY substate indicates the
+ * device is waiting for the RESET task coming to be recovered from
+ * certain hardware specific error.
+ *
+ * @SCI_SMP_DEV_IDLE: This is the ready operational substate for the
+ * remote device.  This is the normal operational state for a remote
+ * device.
+ *
+ * @SCI_SMP_DEV_CMD: This is the suspended state for the remote device.
+ * This is the state that the device is placed in when a RNC suspend is
+ * received by the SCU hardware.
+ *
+ * @SCI_DEV_STOPPING: This state indicates that the remote device is in
+ * the process of stopping.  In this state no new IO operations are
+ * permitted, but existing IO operations are allowed to complete.  This
+ * state is entered from the READY state.  This state is entered from
+ * the FAILED state.
+ *
+ * @SCI_DEV_FAILED: This state indicates that the remote device has
+ * failed.  In this state no new IO operations are permitted.  This
+ * state is entered from the INITIALIZING state.  This state is entered
+ * from the READY state.
+ *
+ * @SCI_DEV_RESETTING: This state indicates the device is being reset.
+ * In this state no new IO operations are permitted.  This state is
+ * entered from the READY state.
+ *
+ * @SCI_DEV_FINAL: Simply the final state for the base remote device
+ * state machine.
  */
-enum sci_remote_device_states {
-	/**
-	 * Simply the initial state for the base remote device state machine.
-	 */
-	SCI_DEV_INITIAL,
-
-	/**
-	 * This state indicates that the remote device has successfully been
-	 * stopped.  In this state no new IO operations are permitted.
-	 * This state is entered from the INITIAL state.
-	 * This state is entered from the STOPPING state.
-	 */
-	SCI_DEV_STOPPED,
-
-	/**
-	 * This state indicates the the remote device is in the process of
-	 * becoming ready (i.e. starting).  In this state no new IO operations
-	 * are permitted.
-	 * This state is entered from the STOPPED state.
-	 */
-	SCI_DEV_STARTING,
-
-	/**
-	 * This state indicates the remote device is now ready.  Thus, the user
-	 * is able to perform IO operations on the remote device.
-	 * This state is entered from the STARTING state.
-	 */
-	SCI_DEV_READY,
-
-	/**
-	 * This is the idle substate for the stp remote device.  When there are no
-	 * active IO for the device it is is in this state.
-	 */
-	SCI_STP_DEV_IDLE,
-
-	/**
-	 * This is the command state for for the STP remote device.  This state is
-	 * entered when the device is processing a non-NCQ command.  The device object
-	 * will fail any new start IO requests until this command is complete.
-	 */
-	SCI_STP_DEV_CMD,
-
-	/**
-	 * This is the NCQ state for the STP remote device.  This state is entered
-	 * when the device is processing an NCQ reuqest.  It will remain in this state
-	 * so long as there is one or more NCQ requests being processed.
-	 */
-	SCI_STP_DEV_NCQ,
-
-	/**
-	 * This is the NCQ error state for the STP remote device.  This state is
-	 * entered when an SDB error FIS is received by the device object while in the
-	 * NCQ state.  The device object will only accept a READ LOG command while in
-	 * this state.
-	 */
-	SCI_STP_DEV_NCQ_ERROR,
-
-	/**
-	 * This is the ATAPI error state for the STP ATAPI remote device.
-	 * This state is entered when ATAPI device sends error status FIS
-	 * without data while the device object is in CMD state.
-	 * A suspension event is expected in this state.
-	 * The device object will resume right away.
-	 */
-	SCI_STP_DEV_ATAPI_ERROR,
-
-	/**
-	 * This is the READY substate indicates the device is waiting for the RESET task
-	 * coming to be recovered from certain hardware specific error.
-	 */
-	SCI_STP_DEV_AWAIT_RESET,
-
-	/**
-	 * This is the ready operational substate for the remote device.  This is the
-	 * normal operational state for a remote device.
-	 */
-	SCI_SMP_DEV_IDLE,
-
-	/**
-	 * This is the suspended state for the remote device.  This is the state that
-	 * the device is placed in when a RNC suspend is received by the SCU hardware.
-	 */
-	SCI_SMP_DEV_CMD,
-
-	/**
-	 * This state indicates that the remote device is in the process of
-	 * stopping.  In this state no new IO operations are permitted, but
-	 * existing IO operations are allowed to complete.
-	 * This state is entered from the READY state.
-	 * This state is entered from the FAILED state.
-	 */
-	SCI_DEV_STOPPING,
-
-	/**
-	 * This state indicates that the remote device has failed.
-	 * In this state no new IO operations are permitted.
-	 * This state is entered from the INITIALIZING state.
-	 * This state is entered from the READY state.
-	 */
-	SCI_DEV_FAILED,
-
-	/**
-	 * This state indicates the device is being reset.
-	 * In this state no new IO operations are permitted.
-	 * This state is entered from the READY state.
-	 */
-	SCI_DEV_RESETTING,
-
-	/**
-	 * Simply the final state for the base remote device state machine.
-	 */
-	SCI_DEV_FINAL,
-};
+#define REMOTE_DEV_STATES {\
+	C(DEV_INITIAL),\
+	C(DEV_STOPPED),\
+	C(DEV_STARTING),\
+	C(DEV_READY),\
+	C(STP_DEV_IDLE),\
+	C(STP_DEV_CMD),\
+	C(STP_DEV_NCQ),\
+	C(STP_DEV_NCQ_ERROR),\
+	C(STP_DEV_ATAPI_ERROR),\
+	C(STP_DEV_AWAIT_RESET),\
+	C(SMP_DEV_IDLE),\
+	C(SMP_DEV_CMD),\
+	C(DEV_STOPPING),\
+	C(DEV_FAILED),\
+	C(DEV_RESETTING),\
+	C(DEV_FINAL),\
+	}
+#undef C
+#define C(a) SCI_##a
+enum sci_remote_device_states REMOTE_DEV_STATES;
+#undef C
+const char *dev_state_name(enum sci_remote_device_states state);
 
 static inline struct isci_remote_device *rnc_to_dev(struct sci_remote_node_context *rnc)
 {

drivers/scsi/isci/remote_node_context.c

@@ -60,18 +60,15 @@
 #include "scu_event_codes.h"
 #include "scu_task_context.h"
 
+#undef C
+#define C(a) (#a)
+const char *rnc_state_name(enum scis_sds_remote_node_context_states state)
+{
+	static const char * const strings[] = RNC_STATES;
 
-/**
- *
- * @sci_rnc: The RNC for which the is posted request is being made.
- *
- * This method will return true if the RNC is not in the initial state.  In all
- * other states the RNC is considered active and this will return true. The
- * destroy request of the state machine drives the RNC back to the initial
- * state.  If the state machine changes then this routine will also have to be
- * changed. bool true if the state machine is not in the initial state false if
- * the state machine is in the initial state
- */
+	return strings[state];
+}
+#undef C
 
 /**
  *

drivers/scsi/isci/remote_node_context.h

@@ -85,61 +85,50 @@ struct sci_remote_node_context;
 typedef void (*scics_sds_remote_node_context_callback)(void *);
 
 /**
- * This is the enumeration of the remote node context states.
+ * enum sci_remote_node_context_states
+ * @SCI_RNC_INITIAL initial state for a remote node context.  On a resume
+ * request the remote node context will transition to the posting state.
+ *
+ * @SCI_RNC_POSTING: transition state that posts the RNi to the hardware. Once
+ * the RNC is posted the remote node context will be made ready.
+ *
+ * @SCI_RNC_INVALIDATING: transition state that will post an RNC invalidate to
+ * the hardware.  Once the invalidate is complete the remote node context will
+ * transition to the posting state.
+ *
+ * @SCI_RNC_RESUMING: transition state that will post an RNC resume to the
+ * hardare.  Once the event notification of resume complete is received the
+ * remote node context will transition to the ready state.
+ *
+ * @SCI_RNC_READY: state that the remote node context must be in to accept io
+ * request operations.
+ *
+ * @SCI_RNC_TX_SUSPENDED: state that the remote node context transitions to when
+ * it gets a TX suspend notification from the hardware.
+ *
+ * @SCI_RNC_TX_RX_SUSPENDED: state that the remote node context transitions to
+ * when it gets a TX RX suspend notification from the hardware.
+ *
+ * @SCI_RNC_AWAIT_SUSPENSION: wait state for the remote node context that waits
+ * for a suspend notification from the hardware.  This state is entered when
+ * either there is a request to supend the remote node context or when there is
+ * a TC completion where the remote node will be suspended by the hardware.
  */
-enum scis_sds_remote_node_context_states {
-	/**
-	 * This state is the initial state for a remote node context.  On a resume
-	 * request the remote node context will transition to the posting state.
-	 */
-	SCI_RNC_INITIAL,
-
-	/**
-	 * This is a transition state that posts the RNi to the hardware. Once the RNC
-	 * is posted the remote node context will be made ready.
-	 */
-	SCI_RNC_POSTING,
-
-	/**
-	 * This is a transition state that will post an RNC invalidate to the
-	 * hardware.  Once the invalidate is complete the remote node context will
-	 * transition to the posting state.
-	 */
-	SCI_RNC_INVALIDATING,
-
-	/**
-	 * This is a transition state that will post an RNC resume to the hardare.
-	 * Once the event notification of resume complete is received the remote node
-	 * context will transition to the ready state.
-	 */
-	SCI_RNC_RESUMING,
-
-	/**
-	 * This is the state that the remote node context must be in to accept io
-	 * request operations.
-	 */
-	SCI_RNC_READY,
-
-	/**
-	 * This is the state that the remote node context transitions to when it gets
-	 * a TX suspend notification from the hardware.
-	 */
-	SCI_RNC_TX_SUSPENDED,
-
-	/**
-	 * This is the state that the remote node context transitions to when it gets
-	 * a TX RX suspend notification from the hardware.
-	 */
-	SCI_RNC_TX_RX_SUSPENDED,
-
-	/**
-	 * This state is a wait state for the remote node context that waits for a
-	 * suspend notification from the hardware.  This state is entered when either
-	 * there is a request to supend the remote node context or when there is a TC
-	 * completion where the remote node will be suspended by the hardware.
-	 */
-	SCI_RNC_AWAIT_SUSPENSION
-};
+#define RNC_STATES {\
+	C(RNC_INITIAL),\
+	C(RNC_POSTING),\
+	C(RNC_INVALIDATING),\
+	C(RNC_RESUMING),\
+	C(RNC_READY),\
+	C(RNC_TX_SUSPENDED),\
+	C(RNC_TX_RX_SUSPENDED),\
+	C(RNC_AWAIT_SUSPENSION),\
+	}
+#undef C
+#define C(a) SCI_##a
+enum scis_sds_remote_node_context_states RNC_STATES;
+#undef C
+const char *rnc_state_name(enum scis_sds_remote_node_context_states state);
 
 /**
  *

drivers/scsi/isci/request.c

@@ -61,6 +61,16 @@
 #include "scu_event_codes.h"
 #include "sas.h"
 
+#undef C
+#define C(a) (#a)
+const char *req_state_name(enum sci_base_request_states state)
+{
+	static const char * const strings[] = REQUEST_STATES;
+
+	return strings[state];
+}
+#undef C
+
 static struct scu_sgl_element_pair *to_sgl_element_pair(struct isci_request *ireq,
 							int idx)
 {
@@ -910,7 +920,8 @@ enum sci_status sci_request_complete(struct isci_request *ireq)
 
 	state = ireq->sm.current_state_id;
 	if (WARN_ONCE(state != SCI_REQ_COMPLETED,
-		      "isci: request completion from wrong state (%d)\n", state))
+		      "isci: request completion from wrong state (%s)\n",
+		      req_state_name(state)))
 		return SCI_FAILURE_INVALID_STATE;
 
 	if (ireq->saved_rx_frame_index != SCU_INVALID_FRAME_INDEX)
@@ -931,8 +942,8 @@ enum sci_status sci_io_request_event_handler(struct isci_request *ireq,
 	state = ireq->sm.current_state_id;
 
 	if (state != SCI_REQ_STP_PIO_DATA_IN) {
-		dev_warn(&ihost->pdev->dev, "%s: (%x) in wrong state %d\n",
-			 __func__, event_code, state);
+		dev_warn(&ihost->pdev->dev, "%s: (%x) in wrong state %s\n",
+			 __func__, event_code, req_state_name(state));
 
 		return SCI_FAILURE_INVALID_STATE;
 	}
@@ -2306,12 +2317,8 @@ sci_io_request_tc_completion(struct isci_request *ireq,
 		return atapi_data_tc_completion_handler(ireq, completion_code);
 
 	default:
-		dev_warn(&ihost->pdev->dev,
-			 "%s: SCIC IO Request given task completion "
-			 "notification %x while in wrong state %d\n",
-			 __func__,
-			 completion_code,
-			 state);
+		dev_warn(&ihost->pdev->dev, "%s: %x in wrong state %s\n",
+			 __func__, completion_code, req_state_name(state));
 		return SCI_FAILURE_INVALID_STATE;
 	}
 }

drivers/scsi/isci/request.h

@@ -182,134 +182,103 @@ static inline struct isci_request *to_ireq(struct isci_stp_request *stp_req)
 }
 
 /**
- * enum sci_base_request_states - This enumeration depicts all the states for
- *    the common request state machine.
+ * enum sci_base_request_states - request state machine states
  *
+ * @SCI_REQ_INIT: Simply the initial state for the base request state machine.
  *
+ * @SCI_REQ_CONSTRUCTED: This state indicates that the request has been
+ * constructed.  This state is entered from the INITIAL state.
+ *
+ * @SCI_REQ_STARTED: This state indicates that the request has been started.
+ * This state is entered from the CONSTRUCTED state.
+ *
+ * @SCI_REQ_STP_UDMA_WAIT_TC_COMP:
+ * @SCI_REQ_STP_UDMA_WAIT_D2H:
+ * @SCI_REQ_STP_NON_DATA_WAIT_H2D:
+ * @SCI_REQ_STP_NON_DATA_WAIT_D2H:
+ *
+ * @SCI_REQ_STP_PIO_WAIT_H2D: While in this state the IO request object is
+ * waiting for the TC completion notification for the H2D Register FIS
+ *
+ * @SCI_REQ_STP_PIO_WAIT_FRAME: While in this state the IO request object is
+ * waiting for either a PIO Setup FIS or a D2H register FIS.  The type of frame
+ * received is based on the result of the prior frame and line conditions.
+ *
+ * @SCI_REQ_STP_PIO_DATA_IN: While in this state the IO request object is
+ * waiting for a DATA frame from the device.
+ *
+ * @SCI_REQ_STP_PIO_DATA_OUT: While in this state the IO request object is
+ * waiting to transmit the next data frame to the device.
+ *
+ * @SCI_REQ_ATAPI_WAIT_H2D: While in this state the IO request object is
+ * waiting for the TC completion notification for the H2D Register FIS
+ *
+ * @SCI_REQ_ATAPI_WAIT_PIO_SETUP: While in this state the IO request object is
+ * waiting for either a PIO Setup.
+ *
+ * @SCI_REQ_ATAPI_WAIT_D2H: The non-data IO transit to this state in this state
+ * after receiving TC completion. While in this state IO request object is
+ * waiting for D2H status frame as UF.
+ *
+ * @SCI_REQ_ATAPI_WAIT_TC_COMP: When transmitting raw frames hardware reports
+ * task context completion after every frame submission, so in the
+ * non-accelerated case we need to expect the completion for the "cdb" frame.
+ *
+ * @SCI_REQ_TASK_WAIT_TC_COMP: The AWAIT_TC_COMPLETION sub-state indicates that
+ * the started raw task management request is waiting for the transmission of
+ * the initial frame (i.e. command, task, etc.).
+ *
+ * @SCI_REQ_TASK_WAIT_TC_RESP: This sub-state indicates that the started task
+ * management request is waiting for the reception of an unsolicited frame
+ * (i.e.  response IU).
+ *
+ * @SCI_REQ_SMP_WAIT_RESP: This sub-state indicates that the started task
+ * management request is waiting for the reception of an unsolicited frame
+ * (i.e.  response IU).
+ *
+ * @SCI_REQ_SMP_WAIT_TC_COMP: The AWAIT_TC_COMPLETION sub-state indicates that
+ * the started SMP request is waiting for the transmission of the initial frame
+ * (i.e.  command, task, etc.).
+ *
+ * @SCI_REQ_COMPLETED: This state indicates that the request has completed.
+ * This state is entered from the STARTED state. This state is entered from the
+ * ABORTING state.
+ *
+ * @SCI_REQ_ABORTING: This state indicates that the request is in the process
+ * of being terminated/aborted.  This state is entered from the CONSTRUCTED
+ * state.  This state is entered from the STARTED state.
+ *
+ * @SCI_REQ_FINAL: Simply the final state for the base request state machine.
  */
-enum sci_base_request_states {
-	/*
-	 * Simply the initial state for the base request state machine.
-	 */
-	SCI_REQ_INIT,
-
-	/*
-	 * This state indicates that the request has been constructed.
-	 * This state is entered from the INITIAL state.
-	 */
-	SCI_REQ_CONSTRUCTED,
-
-	/*
-	 * This state indicates that the request has been started. This state
-	 * is entered from the CONSTRUCTED state.
-	 */
-	SCI_REQ_STARTED,
-
-	SCI_REQ_STP_UDMA_WAIT_TC_COMP,
-	SCI_REQ_STP_UDMA_WAIT_D2H,
-
-	SCI_REQ_STP_NON_DATA_WAIT_H2D,
-	SCI_REQ_STP_NON_DATA_WAIT_D2H,
-
-	/*
-	 * While in this state the IO request object is waiting for the TC
-	 * completion notification for the H2D Register FIS
-	 */
-	SCI_REQ_STP_PIO_WAIT_H2D,
-
-	/*
-	 * While in this state the IO request object is waiting for either a
-	 * PIO Setup FIS or a D2H register FIS.  The type of frame received is
-	 * based on the result of the prior frame and line conditions.
-	 */
-	SCI_REQ_STP_PIO_WAIT_FRAME,
-
-	/*
-	 * While in this state the IO request object is waiting for a DATA
-	 * frame from the device.
-	 */
-	SCI_REQ_STP_PIO_DATA_IN,
-
-	/*
-	 * While in this state the IO request object is waiting to transmit
-	 * the next data frame to the device.
-	 */
-	SCI_REQ_STP_PIO_DATA_OUT,
-
-	/*
-	 * While in this state the IO request object is waiting for the TC
-	 * completion notification for the H2D Register FIS
-	 */
-	SCI_REQ_ATAPI_WAIT_H2D,
-
-	/*
-	 * While in this state the IO request object is waiting for either a
-	 * PIO Setup.
-	 */
-	SCI_REQ_ATAPI_WAIT_PIO_SETUP,
-
-	/*
-	 * The non-data IO transit to this state in this state after receiving
-	 * TC completion. While in this state IO request object is waiting for
-	 * D2H status frame as UF.
-	 */
-	SCI_REQ_ATAPI_WAIT_D2H,
-
-	/*
-	 * When transmitting raw frames hardware reports task context completion
-	 * after every frame submission, so in the non-accelerated case we need
-	 * to expect the completion for the "cdb" frame.
-	 */
-	SCI_REQ_ATAPI_WAIT_TC_COMP,
-
-	/*
-	 * The AWAIT_TC_COMPLETION sub-state indicates that the started raw
-	 * task management request is waiting for the transmission of the
-	 * initial frame (i.e. command, task, etc.).
-	 */
-	SCI_REQ_TASK_WAIT_TC_COMP,
-
-	/*
-	 * This sub-state indicates that the started task management request
-	 * is waiting for the reception of an unsolicited frame
-	 * (i.e. response IU).
-	 */
-	SCI_REQ_TASK_WAIT_TC_RESP,
-
-	/*
-	 * This sub-state indicates that the started task management request
-	 * is waiting for the reception of an unsolicited frame
-	 * (i.e. response IU).
-	 */
-	SCI_REQ_SMP_WAIT_RESP,
-
-	/*
-	 * The AWAIT_TC_COMPLETION sub-state indicates that the started SMP
-	 * request is waiting for the transmission of the initial frame
-	 * (i.e. command, task, etc.).
-	 */
-	SCI_REQ_SMP_WAIT_TC_COMP,
-
-	/*
-	 * This state indicates that the request has completed.
-	 * This state is entered from the STARTED state. This state is entered
-	 * from the ABORTING state.
-	 */
-	SCI_REQ_COMPLETED,
-
-	/*
-	 * This state indicates that the request is in the process of being
-	 * terminated/aborted.
-	 * This state is entered from the CONSTRUCTED state.
-	 * This state is entered from the STARTED state.
-	 */
-	SCI_REQ_ABORTING,
-
-	/*
-	 * Simply the final state for the base request state machine.
-	 */
-	SCI_REQ_FINAL,
-};
+#define REQUEST_STATES {\
+	C(REQ_INIT),\
+	C(REQ_CONSTRUCTED),\
+	C(REQ_STARTED),\
+	C(REQ_STP_UDMA_WAIT_TC_COMP),\
+	C(REQ_STP_UDMA_WAIT_D2H),\
+	C(REQ_STP_NON_DATA_WAIT_H2D),\
+	C(REQ_STP_NON_DATA_WAIT_D2H),\
+	C(REQ_STP_PIO_WAIT_H2D),\
+	C(REQ_STP_PIO_WAIT_FRAME),\
+	C(REQ_STP_PIO_DATA_IN),\
+	C(REQ_STP_PIO_DATA_OUT),\
+	C(REQ_ATAPI_WAIT_H2D),\
+	C(REQ_ATAPI_WAIT_PIO_SETUP),\
+	C(REQ_ATAPI_WAIT_D2H),\
+	C(REQ_ATAPI_WAIT_TC_COMP),\
+	C(REQ_TASK_WAIT_TC_COMP),\
+	C(REQ_TASK_WAIT_TC_RESP),\
+	C(REQ_SMP_WAIT_RESP),\
+	C(REQ_SMP_WAIT_TC_COMP),\
+	C(REQ_COMPLETED),\
+	C(REQ_ABORTING),\
+	C(REQ_FINAL),\
+	}
+#undef C
+#define C(a) SCI_##a
+enum sci_base_request_states REQUEST_STATES;
+#undef C
+const char *req_state_name(enum sci_base_request_states state);
 
 enum sci_status sci_request_start(struct isci_request *ireq);
 enum sci_status sci_io_request_terminate(struct isci_request *ireq);