dma: fix comments

Correct spelling typo in drivers/dma.
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

drivers/dma/at_hdmac.c

@@ -169,9 +169,9 @@ static void atc_desc_put(struct at_dma_chan *atchan, struct at_desc *desc)
 }
 
 /**
- * atc_desc_chain - build chain adding a descripor
- * @first: address of first descripor of the chain
- * @prev: address of previous descripor of the chain
+ * atc_desc_chain - build chain adding a descriptor
+ * @first: address of first descriptor of the chain
+ * @prev: address of previous descriptor of the chain
  * @desc: descriptor to queue
  *
  * Called from prep_* functions
@@ -786,7 +786,7 @@ atc_dma_cyclic_check_values(unsigned int reg_width, dma_addr_t buf_addr,
 }
 
 /**
- * atc_dma_cyclic_fill_desc - Fill one period decriptor
+ * atc_dma_cyclic_fill_desc - Fill one period descriptor
  */
 static int
 atc_dma_cyclic_fill_desc(struct dma_chan *chan, struct at_desc *desc,

drivers/dma/ep93xx_dma.c

@@ -1118,7 +1118,7 @@ ep93xx_dma_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
  * @chan: channel
  * @dma_addr: DMA mapped address of the buffer
  * @buf_len: length of the buffer (in bytes)
- * @period_len: lenght of a single period
+ * @period_len: length of a single period
  * @dir: direction of the operation
  * @context: operation context (ignored)
  *

drivers/dma/fsldma.c

@@ -1015,7 +1015,7 @@ static irqreturn_t fsldma_chan_irq(int irq, void *data)
 	/*
 	 * Programming Error
 	 * The DMA_INTERRUPT async_tx is a NULL transfer, which will
-	 * triger a PE interrupt.
+	 * trigger a PE interrupt.
 	 */
 	if (stat & FSL_DMA_SR_PE) {
 		chan_dbg(chan, "irq: Programming Error INT\n");

drivers/dma/imx-dma.c

@@ -571,8 +571,8 @@ static void imxdma_tasklet(unsigned long data)
 	if (desc->desc.callback)
 		desc->desc.callback(desc->desc.callback_param);
 
-	/* If we are dealing with a cyclic descriptor keep it on ld_active
-	 * and dont mark the descripor as complete.
+	/* If we are dealing with a cyclic descriptor, keep it on ld_active
+	 * and dont mark the descriptor as complete.
 	 * Only in non-cyclic cases it would be marked as complete
 	 */
 	if (imxdma_chan_is_doing_cyclic(imxdmac))

drivers/dma/intel_mid_dma_regs.h

@@ -168,9 +168,9 @@ union intel_mid_dma_cfg_hi {
  * @active_list: current active descriptors
  * @queue: current queued up descriptors
  * @free_list: current free descriptors
- * @slave: dma slave struture
- * @descs_allocated: total number of decsiptors allocated
- * @dma: dma device struture pointer
+ * @slave: dma slave structure
+ * @descs_allocated: total number of descriptors allocated
+ * @dma: dma device structure pointer
  * @busy: bool representing if ch is busy (active txn) or not
  * @in_use: bool representing if ch is in use or not
  * @raw_tfr: raw trf interrupt received

drivers/dma/pl330.c

@@ -522,7 +522,7 @@ enum desc_status {
 	/* In the DMAC pool */
 	FREE,
 	/*
-	 * Allocted to some channel during prep_xxx
+	 * Allocated to some channel during prep_xxx
 	 * Also may be sitting on the work_list.
 	 */
 	PREP,

drivers/dma/ppc4xx/adma.c

@@ -4446,7 +4446,7 @@ static int __devinit ppc440spe_adma_probe(struct platform_device *ofdev)
 		ret = -ENOMEM;
 		goto err_dma_alloc;
 	}
-	dev_dbg(&ofdev->dev, "allocted descriptor pool virt 0x%p phys 0x%llx\n",
+	dev_dbg(&ofdev->dev, "allocated descriptor pool virt 0x%p phys 0x%llx\n",
 		adev->dma_desc_pool_virt, (u64)adev->dma_desc_pool);
 
 	regs = ioremap(res.start, resource_size(&res));

drivers/dma/ste_dma40_ll.h

@@ -202,7 +202,7 @@
 /* LLI related structures */
 
 /**
- * struct d40_phy_lli - The basic configration register for each physical
+ * struct d40_phy_lli - The basic configuration register for each physical
  * channel.
  *
  * @reg_cfg: The configuration register.