misc/at25, dt: Improve at25 SPI eeprom device tree bindings.

Commit 002176db (misc: at25: Parse dt settings) added device tree
bindings the differ significantly in style from the I2C EEPROM
bindings and don't seem well vetted.  Here I deprecate (but still
support) the "at25,*" properties, and add what I hope is a better
alternative.  These new bindings also happen to be deployed in the
field and were previously submitted for consideration here:

https://lists.ozlabs.org/pipermail/devicetree-discuss/2012-May/015556.html

The advantages of the new bindings are that they are similar to the
I2C EEPROMs and they don't conflate read-only and the address width
modes in a binary encoded blob.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Cc: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Cc: Axel Lin <axel.lin@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/devicetree/bindings/misc/at25.txt

-Atmel AT25 eeprom
+EEPROMs (SPI) compatible with Atmel at25.
 
 Required properties:
 - compatible : "atmel,at25".
 - reg : chip select number
 - spi-max-frequency : max spi frequency to use
+- pagesize : size of the eeprom page
+- size : total eeprom size in bytes
+- address-width : number of address bits (one of 8, 16, or 24)
 
+Optional properties:
+- spi-cpha : SPI shifted clock phase, as per spi-bus bindings.
+- spi-cpol : SPI inverse clock polarity, as per spi-bus bindings.
+- read-only : this parameter-less property disables writes to the eeprom
+
+Obsolete legacy properties are can be used in place of "size", "pagesize",
+"address-width", and "read-only":
 - at25,byte-len : total eeprom size in bytes
 - at25,addr-mode : addr-mode flags, as defined in include/linux/spi/eeprom.h
 - at25,page-size : size of the eeprom page
 
-Examples:
-at25@0 {
-	compatible = "atmel,at25";
-	reg = <0>
-	spi-max-frequency = <5000000>;
+Additional compatible properties are also allowed.
+
+Example:
+	at25@0 {
+		compatible = "atmel,at25", "st,m95256";
+		reg = <0>
+		spi-max-frequency = <5000000>;
+		spi-cpha;
+		spi-cpol;
 
-	at25,byte-len = <0x8000>;
-	at25,addr-mode = <2>;
-	at25,page-size = <64>;
-};
+		pagesize = <64>;
+		size = <32768>;
+		address-width = <16>;
+	};

drivers/misc/eeprom/at25.c

@@ -302,6 +302,61 @@ static ssize_t at25_mem_write(struct memory_accessor *mem, const char *buf,
 
 /*-------------------------------------------------------------------------*/
 
+static int at25_np_to_chip(struct device *dev,
+			   struct device_node *np,
+			   struct spi_eeprom *chip)
+{
+	u32 val;
+
+	memset(chip, 0, sizeof(*chip));
+	strncpy(chip->name, np->name, sizeof(chip->name));
+
+	if (of_property_read_u32(np, "size", &val) == 0 ||
+	    of_property_read_u32(np, "at25,byte-len", &val) == 0) {
+		chip->byte_len = val;
+	} else {
+		dev_err(dev, "Error: missing \"size\" property\n");
+		return -ENODEV;
+	}
+
+	if (of_property_read_u32(np, "pagesize", &val) == 0 ||
+	    of_property_read_u32(np, "at25,page-size", &val) == 0) {
+		chip->page_size = (u16)val;
+	} else {
+		dev_err(dev, "Error: missing \"pagesize\" property\n");
+		return -ENODEV;
+	}
+
+	if (of_property_read_u32(np, "at25,addr-mode", &val) == 0) {
+		chip->flags = (u16)val;
+	} else {
+		if (of_property_read_u32(np, "address-width", &val)) {
+			dev_err(dev,
+				"Error: missing \"address-width\" property\n");
+			return -ENODEV;
+		}
+		switch (val) {
+		case 8:
+			chip->flags |= EE_ADDR1;
+			break;
+		case 16:
+			chip->flags |= EE_ADDR2;
+			break;
+		case 24:
+			chip->flags |= EE_ADDR3;
+			break;
+		default:
+			dev_err(dev,
+				"Error: bad \"address-width\" property: %u\n",
+				val);
+			return -ENODEV;
+		}
+		if (of_find_property(np, "read-only", NULL))
+			chip->flags |= EE_READONLY;
+	}
+	return 0;
+}
+
 static int at25_probe(struct spi_device *spi)
 {
 	struct at25_data	*at25 = NULL;
@@ -314,33 +369,11 @@ static int at25_probe(struct spi_device *spi)
 	/* Chip description */
 	if (!spi->dev.platform_data) {
 		if (np) {
-			u32 val;
-
-			memset(&chip, 0, sizeof(chip));
-			strncpy(chip.name, np->name, 10);
-
-			err = of_property_read_u32(np, "at25,byte-len", &val);
-			if (err) {
-				dev_dbg(&spi->dev, "invalid chip dt description\n");
-				goto fail;
-			}
-			chip.byte_len = val;
-
-			err = of_property_read_u32(np, "at25,addr-mode", &val);
-			if (err) {
-				dev_dbg(&spi->dev, "invalid chip dt description\n");
-				goto fail;
-			}
-			chip.flags = (u16)val;
-
-			err = of_property_read_u32(np, "at25,page-size", &val);
-			if (err) {
-				dev_dbg(&spi->dev, "invalid chip dt description\n");
+			err = at25_np_to_chip(&spi->dev, np, &chip);
+			if (err)
 				goto fail;
-			}
-			chip.page_size = (u16)val;
 		} else {
-			dev_dbg(&spi->dev, "no chip description\n");
+			dev_err(&spi->dev, "Error: no chip description\n");
 			err = -ENODEV;
 			goto fail;
 		}