提交 d67f5489 编写于 作者: R Ron Rindjunsky 提交者: John W. Linville

iwlwifi: handle shared memory Rx index access

This patch splits ucode's and driver's shared memory Rx index access to
match 4965 and 5000 offsets.
Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 5ec03976
......@@ -2006,7 +2006,7 @@ void iwl4965_hw_build_tx_cmd_rate(struct iwl_priv *priv,
tx->rate_n_flags = iwl4965_hw_set_rate_n_flags(rate_plcp, rate_flags);
}
int iwl4965_hw_get_rx_read(struct iwl_priv *priv)
static int iwl4965_shared_mem_rx_idx(struct iwl_priv *priv)
{
struct iwl4965_shared *s = priv->shared_virt;
return le32_to_cpu(s->rb_closed) & 0xFFF;
......@@ -2093,6 +2093,8 @@ static int iwl4965_alloc_shared_mem(struct iwl_priv *priv)
memset(priv->shared_virt, 0, sizeof(struct iwl4965_shared));
priv->rb_closed_offset = offsetof(struct iwl4965_shared, rb_closed);
return 0;
}
......@@ -3824,6 +3826,7 @@ static struct iwl_lib_ops iwl4965_lib = {
.set_hw_params = iwl4965_hw_set_hw_params,
.alloc_shared_mem = iwl4965_alloc_shared_mem,
.free_shared_mem = iwl4965_free_shared_mem,
.shared_mem_rx_idx = iwl4965_shared_mem_rx_idx,
.txq_update_byte_cnt_tbl = iwl4965_txq_update_byte_cnt_tbl,
.disable_tx_fifo = iwl4965_disable_tx_fifo,
.rx_handler_setup = iwl4965_rx_handler_setup,
......
......@@ -362,6 +362,8 @@ static int iwl5000_alloc_shared_mem(struct iwl_priv *priv)
memset(priv->shared_virt, 0, sizeof(struct iwl5000_shared));
priv->rb_closed_offset = offsetof(struct iwl5000_shared, rb_closed);
return 0;
}
......@@ -374,6 +376,12 @@ static void iwl5000_free_shared_mem(struct iwl_priv *priv)
priv->shared_phys);
}
static int iwl5000_shared_mem_rx_idx(struct iwl_priv *priv)
{
struct iwl5000_shared *s = priv->shared_virt;
return le32_to_cpu(s->rb_closed) & 0xFFF;
}
/**
* iwl5000_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array
*/
......@@ -466,6 +474,7 @@ static struct iwl_lib_ops iwl5000_lib = {
.set_hw_params = iwl5000_hw_set_hw_params,
.alloc_shared_mem = iwl5000_alloc_shared_mem,
.free_shared_mem = iwl5000_free_shared_mem,
.shared_mem_rx_idx = iwl5000_shared_mem_rx_idx,
.txq_update_byte_cnt_tbl = iwl5000_txq_update_byte_cnt_tbl,
.disable_tx_fifo = iwl5000_disable_tx_fifo,
.apm_ops = {
......
......@@ -103,6 +103,7 @@ struct iwl_lib_ops {
/* ucode shared memory */
int (*alloc_shared_mem)(struct iwl_priv *priv);
void (*free_shared_mem)(struct iwl_priv *priv);
int (*shared_mem_rx_idx)(struct iwl_priv *priv);
void (*txq_update_byte_cnt_tbl)(struct iwl_priv *priv,
struct iwl4965_tx_queue *txq,
u16 byte_cnt);
......
......@@ -697,7 +697,6 @@ extern int iwl4965_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv, void *tfd,
extern int iwl4965_hw_get_temperature(struct iwl_priv *priv);
extern unsigned int iwl4965_hw_get_beacon_cmd(struct iwl_priv *priv,
struct iwl4965_frame *frame, u8 rate);
extern int iwl4965_hw_get_rx_read(struct iwl_priv *priv);
extern void iwl4965_hw_build_tx_cmd_rate(struct iwl_priv *priv,
struct iwl_cmd *cmd,
struct ieee80211_tx_control *ctrl,
......@@ -1138,6 +1137,7 @@ struct iwl_priv {
struct iwl_hw_params hw_params;
/* driver/uCode shared Tx Byte Counts and Rx status */
void *shared_virt;
int rb_closed_offset;
/* Physical Pointer to Tx Byte Counts and Rx status */
dma_addr_t shared_phys;
......
......@@ -399,8 +399,7 @@ int iwl_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
/* Tell device where in DRAM to update its Rx status */
iwl_write_direct32(priv, FH_RSCSR_CHNL0_STTS_WPTR_REG,
(priv->shared_phys +
offsetof(struct iwl4965_shared, rb_closed)) >> 4);
(priv->shared_phys + priv->rb_closed_offset) >> 4);
/* Enable Rx DMA, enable host interrupt, Rx buffer size 4k, 256 RBDs */
iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG,
......
......@@ -3095,7 +3095,7 @@ void iwl_rx_handle(struct iwl_priv *priv)
/* uCode's read index (stored in shared DRAM) indicates the last Rx
* buffer that the driver may process (last buffer filled by ucode). */
r = iwl4965_hw_get_rx_read(priv);
r = priv->cfg->ops->lib->shared_mem_rx_idx(priv);
i = rxq->read;
/* Rx interrupt, but nothing sent from uCode */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册