提交 d670bd4f 编写于 作者: S Sam Ravnborg 提交者: David S. Miller

sparc: prepare kernel/ for unification

o sparc32 files with identical names to sparc64 renamed to <name>_32.S
o introduced a few Kconfig helpers to simplify Makefile logic
o refactored Makefile to prepare for unification
  - use obj-$(CONFIG_SPARC32) for sparc32 specific files
  - use <name>_$(BITS) for files where sparc64 has a _64 variant
  - sparc64 directly include a few files where sparc32 builds them,
    refer to these files directly (no BITS)
  - sneaked in -Werror as used by sparc64
o modified sparc/Makefile to use the new names for head/init_task
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 478b8fec
......@@ -198,6 +198,17 @@ config EMULATED_CMPXCHG
Sparc32 does not have a CAS instruction like sparc64. cmpxchg()
is emulated, and therefore it is not completely atomic.
# Makefile helpers
config SPARC32_SMP
bool
default y
depends on SPARC32 && SMP
config SPARC64_SMP
bool
default y
depends on SPARC64 && SMP
choice
prompt "Kernel page size" if SPARC64
default SPARC64_PAGE_SIZE_8KB
......@@ -505,6 +516,16 @@ config SUN_OPENPROMFS
Only choose N if you know in advance that you will not need to modify
OpenPROM settings on the running system.
# Makefile helpers
config SPARC32_PCI
bool
default y
depends on SPARC32 && PCI
config SPARC64_PCI
bool
default y
depends on SPARC64 && PCI
endmenu
......
......@@ -67,8 +67,8 @@ endif
endif
head-$(CONFIG_SPARC32) := arch/sparc/kernel/head.o
head-$(CONFIG_SPARC32) += arch/sparc/kernel/init_task.o
head-$(CONFIG_SPARC32) := arch/sparc/kernel/head_$(BITS).o
head-$(CONFIG_SPARC32) += arch/sparc/kernel/init_task_$(BITS).o
head-$(CONFIG_SPARC64) := arch/sparc64/kernel/head.o
head-$(CONFIG_SPARC64) += arch/sparc64/kernel/init_task.o
......
......@@ -2,25 +2,57 @@
# Makefile for the linux kernel.
#
extra-y := head.o init_task.o vmlinux.lds
EXTRA_AFLAGS := -ansi
IRQ_OBJS := irq.o sun4m_irq.o sun4c_irq.o sun4d_irq.o
obj-y := entry.o wof.o wuf.o etrap.o rtrap.o traps.o $(IRQ_OBJS) \
process.o signal.o ioport.o setup.o idprom.o \
sys_sparc.o systbls.o \
time.o windows.o cpu.o devices.o \
tadpole.o tick14.o ptrace.o \
unaligned.o una_asm.o muldiv.o \
prom.o of_device.o devres.o dma.o
devres-y = ../../../kernel/irq/devres.o
obj-$(CONFIG_PCI) += pcic.o
obj-$(CONFIG_SMP) += trampoline.o smp.o sun4m_smp.o sun4d_smp.o
obj-$(CONFIG_SUN_AUXIO) += auxio.o
obj-$(CONFIG_SUN_PM) += apc.o pmc.o
obj-$(CONFIG_MODULES) += module.o sparc_ksyms.o
obj-$(CONFIG_SPARC_LED) += led.o
obj-$(CONFIG_KGDB) += kgdb.o
asflags-y := -ansi
ccflags-y := -Werror
extra-y := head_$(BITS).o
extra-y += init_task_$(BITS).o
extra-y += vmlinux.lds
obj-$(CONFIG_SPARC32) += entry.o wof.o wuf.o
obj-$(CONFIG_SPARC32) += etrap_32.o
obj-$(CONFIG_SPARC32) += rtrap_32.o
obj-y += traps_$(BITS).o
# IRQ
obj-y += irq_$(BITS).o
obj-$(CONFIG_SPARC32) += sun4m_irq.o sun4c_irq.o sun4d_irq.o
obj-y += process_$(BITS).o
obj-y += signal_$(BITS).o
obj-$(CONFIG_SPARC32) += ioport.o
obj-y += setup_$(BITS).o
obj-y += idprom_$(BITS).o
obj-y += sys_sparc_$(BITS).o
obj-$(CONFIG_SPARC32) += systbls_32.o
obj-y += time_$(BITS).o
obj-$(CONFIG_SPARC32) += windows.o
obj-y += cpu_$(BITS).o
obj-$(CONFIG_SPARC32) += devices.o
obj-$(CONFIG_SPARC32) += tadpole.o
obj-$(CONFIG_SPARC32) += tick14.o
obj-y += ptrace_$(BITS).o
obj-y += unaligned_$(BITS).o
obj-y += una_asm_$(BITS).o
obj-$(CONFIG_SPARC32) += muldiv.o
obj-y += prom_$(BITS).o
obj-y += of_device_$(BITS).o
# sparc32 do not use GENERIC_HARDIRQS but uses the generic devres implementation
obj-$(CONFIG_SPARC32) += devres.o
devres-y := ../../../kernel/irq/devres.o
obj-$(CONFIG_SPARC32) += dma.o
obj-$(CONFIG_SPARC32_PCI) += pcic.o
obj-$(CONFIG_SMP) += trampoline_$(BITS).o smp_$(BITS).o
obj-$(CONFIG_SPARC32_SMP) += sun4m_smp.o sun4d_smp.o
obj-y += auxio_$(BITS).o
obj-$(CONFIG_SUN_PM) += apc.o pmc.o
obj-$(CONFIG_MODULES) += module_$(BITS).o
obj-$(CONFIG_MODULES) += sparc_ksyms_$(BITS).o
obj-$(CONFIG_SPARC_LED) += led.o
obj-$(CONFIG_KGDB) += kgdb_$(BITS).o
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册