staging: irda: remove the irda network stack and drivers

No one has publicly stepped up to maintain this broken codebase for
devices that no one uses anymore, so let's just drop the whole thing.

If someone really wants/needs it, we can revert this and they can fix
the code up to work properly.

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/networking/irda.txt

-To use the IrDA protocols within Linux you will need to get a suitable copy
-of the IrDA Utilities. More detailed information about these and associated
-programs can be found on http://irda.sourceforge.net/
-
-For more information about how to use the IrDA protocol stack, see the
-Linux Infrared HOWTO by Werner Heuser <wehe@tuxmobil.org>:
-<http://www.tuxmobil.org/Infrared-HOWTO/Infrared-HOWTO.html>
-
-There is an active mailing list for discussing Linux-IrDA matters called
-    irda-users@lists.sourceforge.net

drivers/staging/Kconfig

@@ -24,8 +24,6 @@ menuconfig STAGING
 
 if STAGING
 
-source "drivers/staging/irda/net/Kconfig"
-
 source "drivers/staging/ipx/Kconfig"
 
 source "drivers/staging/ncpfs/Kconfig"

drivers/staging/Makefile

@@ -5,8 +5,6 @@ obj-y				+= media/
 obj-y				+= typec/
 obj-$(CONFIG_IPX)		+= ipx/
 obj-$(CONFIG_NCP_FS)		+= ncpfs/
-obj-$(CONFIG_IRDA)		+= irda/net/
-obj-$(CONFIG_IRDA)		+= irda/drivers/
 obj-$(CONFIG_PRISM2_USB)	+= wlan-ng/
 obj-$(CONFIG_COMEDI)		+= comedi/
 obj-$(CONFIG_FB_OLPC_DCON)	+= olpc_dcon/

drivers/staging/irda/TODO

-The irda code will be removed soon from the kernel tree as it is old and
-obsolete and broken.
-
-Don't worry about fixing up anything here, it's not needed.

drivers/staging/irda/drivers/Kconfig

-menu "Infrared-port device drivers"
-	depends on IRDA!=n
-
-comment "SIR device drivers"
-
-config IRTTY_SIR
-	tristate "IrTTY (uses Linux serial driver)"
-	depends on IRDA && TTY
-	help
-	  Say Y here if you want to build support for the IrTTY line
-	  discipline.  To compile it as a module, choose M here: the module
-	  will be called irtty-sir. IrTTY makes it possible to use Linux's
-	  own serial driver for all IrDA ports that are 16550 compatible.
-	  Most IrDA chips are 16550 compatible so you should probably say Y
-	  to this option.  Using IrTTY will however limit the speed of the
-	  connection to 115200 bps (IrDA SIR mode).
-
-	  If unsure, say Y.
-
-config BFIN_SIR
-	tristate "Blackfin SIR on UART"
-	depends on BLACKFIN && IRDA
-	default n
-	help
-	  Say Y here if your want to enable SIR function on Blackfin UART
-	  devices.
-
-	  To activate this driver you can start irattach like:
-	  "irattach irda0 -s"
-
-	  Saying M, it will be built as a module named bfin_sir.
-
-	  Note that you need to turn off one of the serial drivers for SIR
-	  to use that UART.
-
-config BFIN_SIR0
-	bool "Blackfin SIR on UART0"
-	depends on BFIN_SIR && !SERIAL_BFIN_UART0
-
-config BFIN_SIR1
-	bool "Blackfin SIR on UART1"
-	depends on BFIN_SIR && !SERIAL_BFIN_UART1 && (!BF531 && !BF532 && !BF533 && !BF561)
-
-config BFIN_SIR2
-	bool "Blackfin SIR on UART2"
-	depends on BFIN_SIR && !SERIAL_BFIN_UART2 && (BF54x || BF538 || BF539)
-
-config BFIN_SIR3
-	bool "Blackfin SIR on UART3"
-	depends on BFIN_SIR && !SERIAL_BFIN_UART3 && (BF54x)
-
-choice
-	prompt "SIR Mode"
-	depends on BFIN_SIR
-	default SIR_BFIN_DMA
-
-config SIR_BFIN_DMA
-	bool "DMA mode"
-	depends on !DMA_UNCACHED_NONE
-
-config SIR_BFIN_PIO
-	bool "PIO mode"
-endchoice
-
-config SH_SIR
-	tristate "SuperH SIR on UART"
-	depends on IRDA && SUPERH && \
-		(CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7723 || \
-		 CPU_SUBTYPE_SH7724)
-	default n
-	help
-	  Say Y here if your want to enable SIR function on SuperH UART
-	  devices.
-
-comment "Dongle support"
-
-config DONGLE
-	bool "Serial dongle support"
-	depends on IRTTY_SIR
-	help
-	  Say Y here if you have an infrared device that connects to your
-	  computer's serial port. These devices are called dongles. Then say Y
-	  or M to the driver for your particular dongle below.
-
-	  Note that the answer to this question won't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about serial dongles.
-
-config ESI_DONGLE
-	tristate "ESI JetEye PC dongle"
-	depends on IRTTY_SIR && DONGLE && IRDA
-	help
-	  Say Y here if you want to build support for the Extended Systems
-	  JetEye PC dongle.  To compile it as a module, choose M here. The ESI
-	  dongle attaches to the normal 9-pin serial port connector, and can
-	  currently only be used by IrTTY.  To activate support for ESI
-	  dongles you will have to start irattach like this:
-	  "irattach -d esi".
-
-config ACTISYS_DONGLE
-	tristate "ACTiSYS IR-220L and IR220L+ dongle"
-	depends on IRTTY_SIR && DONGLE && IRDA
-	help
-	  Say Y here if you want to build support for the ACTiSYS IR-220L and
-	  IR220L+ dongles.  To compile it as a module, choose M here. The
-	  ACTiSYS dongles attaches to the normal 9-pin serial port connector,
-	  and can currently only be used by IrTTY.  To activate support for
-	  ACTiSYS dongles you will have to start irattach like this:
-	  "irattach -d actisys" or "irattach -d actisys+".
-
-config TEKRAM_DONGLE
-	tristate "Tekram IrMate 210B dongle"
-	depends on IRTTY_SIR && DONGLE && IRDA
-	help
-	  Say Y here if you want to build support for the Tekram IrMate 210B
-	  dongle.  To compile it as a module, choose M here. The Tekram dongle
-	  attaches to the normal 9-pin serial port connector, and can
-	  currently only be used by IrTTY.  To activate support for Tekram
-	  dongles you will have to start irattach like this:
-	  "irattach -d tekram".
-
-config TOIM3232_DONGLE
-	tristate "TOIM3232 IrDa dongle"
-	depends on IRTTY_SIR && DONGLE && IRDA
-	help
-	  Say Y here if you want to build support for the Vishay/Temic
-	  TOIM3232 and TOIM4232 based dongles.
-	  To compile it as a module, choose M here.
-
-config LITELINK_DONGLE
-	tristate "Parallax LiteLink dongle"
-	depends on IRTTY_SIR && DONGLE && IRDA
-	help
-	  Say Y here if you want to build support for the Parallax Litelink
-	  dongle.  To compile it as a module, choose M here.  The Parallax
-	  dongle attaches to the normal 9-pin serial port connector, and can
-	  currently only be used by IrTTY.  To activate support for Parallax
-	  dongles you will have to start irattach like this:
-	  "irattach -d litelink".
-
-config MA600_DONGLE
-	tristate "Mobile Action MA600 dongle"
-	depends on IRTTY_SIR && DONGLE && IRDA
-	help
-	  Say Y here if you want to build support for the Mobile Action MA600
-	  dongle.  To compile it as a module, choose M here. The MA600 dongle
-	  attaches to the normal 9-pin serial port connector, and can
-	  currently only be used by IrTTY.  The driver should also support
-	  the MA620 USB version of the dongle, if the integrated USB-to-RS232
-	  converter is supported by usbserial. To activate support for
-	  MA600 dongle you will have to start irattach like this:
-	  "irattach -d ma600".
-
-config GIRBIL_DONGLE
-	tristate "Greenwich GIrBIL dongle"
-	depends on IRTTY_SIR && DONGLE && IRDA
-	help
-	  Say Y here if you want to build support for the Greenwich GIrBIL
-	  dongle.  If you want to compile it as a module, choose M here.
-	  The Greenwich dongle attaches to the normal 9-pin serial port
-	  connector, and can currently only be used by IrTTY.  To activate
-	  support for Greenwich dongles you will have to start irattach
-	  like this: "irattach -d girbil".
-
-config MCP2120_DONGLE
-	tristate "Microchip MCP2120"
-	depends on IRTTY_SIR && DONGLE && IRDA
-	help
-	  Say Y here if you want to build support for the Microchip MCP2120
-	  dongle.  If you want to compile it as a module, choose M here.
-	  The MCP2120 dongle attaches to the normal 9-pin serial port
-	  connector, and can currently only be used by IrTTY.  To activate
-	  support for MCP2120 dongles you will have to start irattach
-	  like this: "irattach -d mcp2120".
-
-	  You must build this dongle yourself.  For more information see:
-	  <http://www.eyetap.org/~tangf/irda_sir_linux.html>
-
-config OLD_BELKIN_DONGLE
-	tristate "Old Belkin dongle"
-	depends on IRTTY_SIR && DONGLE && IRDA
-	help
-	  Say Y here if you want to build support for the Adaptec Airport 1000
-	  and 2000 dongles.  If you want to compile it as a module, choose
-	  M here. Some information is contained in the comments
-	  at the top of <file:drivers/net/irda/old_belkin-sir.c>.
-
-config ACT200L_DONGLE
-	tristate "ACTiSYS IR-200L dongle"
-	depends on IRTTY_SIR && DONGLE && IRDA
-	help
-	  Say Y here if you want to build support for the ACTiSYS IR-200L
-	  dongle. If you want to compile it as a module, choose M here.
-	  The ACTiSYS IR-200L dongle attaches to the normal 9-pin serial
-	  port connector, and can currently only be used by IrTTY.
-	  To activate support for ACTiSYS IR-200L dongle you will have to
-	  start irattach like this: "irattach -d act200l".
-
-config KINGSUN_DONGLE
-	tristate "KingSun/DonShine DS-620 IrDA-USB dongle"
-	depends on IRDA && USB
-	help
-	  Say Y or M here if you want to build support for the KingSun/DonShine
-	  DS-620 IrDA-USB bridge device driver.
-
-	  This USB bridge does not conform to the IrDA-USB device class
-	  specification, and therefore needs its own specific driver. This
-	  dongle supports SIR speed only (9600 bps).
-
-	  To compile it as a module, choose M here: the module will be called
-	  kingsun-sir.
-
-config KSDAZZLE_DONGLE
-	tristate "KingSun Dazzle IrDA-USB dongle"
-	depends on IRDA && USB
-	help
-	  Say Y or M here if you want to build support for the KingSun Dazzle
-	  IrDA-USB bridge device driver.
-
-	  This USB bridge does not conform to the IrDA-USB device class
-	  specification, and therefore needs its own specific driver. This
-	  dongle supports SIR speeds only (9600 through 115200 bps).
-
-	  To compile it as a module, choose M here: the module will be called
-	  ksdazzle-sir.
-
-config KS959_DONGLE
-	tristate "KingSun KS-959 IrDA-USB dongle"
-	depends on IRDA && USB
-	help
-	  Say Y or M here if you want to build support for the KingSun KS-959
-	  IrDA-USB bridge device driver.
-
-	  This USB bridge does not conform to the IrDA-USB device class
-	  specification, and therefore needs its own specific driver. This
-	  dongle supports SIR speeds only (9600 through 57600 bps).
-
-	  To compile it as a module, choose M here: the module will be called
-	  ks959-sir.
-
-comment "FIR device drivers"
-
-config USB_IRDA
-	tristate "IrDA USB dongles"
-	depends on IRDA && USB
-	select FW_LOADER
-	---help---
-	  Say Y here if you want to build support for the USB IrDA FIR Dongle
-	  device driver.  To compile it as a module, choose M here: the module
-	  will be called irda-usb.  IrDA-USB support the various IrDA USB
-	  dongles available and most of their peculiarities.  Those dongles
-	  plug in the USB port of your computer, are plug and play, and
-	  support SIR and FIR (4Mbps) speeds.  On the other hand, those
-	  dongles tend to be less efficient than a FIR chipset.
-
-	  Please note that the driver is still experimental.  And of course,
-	  you will need both USB and IrDA support in your kernel...
-
-config SIGMATEL_FIR
-	tristate "SigmaTel STIr4200 bridge"
-	depends on IRDA && USB
-	select CRC32
-	---help---
-	  Say Y here if you want to build support for the SigmaTel STIr4200
-	  USB IrDA FIR bridge device driver.  
-
-	  USB bridge based on the SigmaTel STIr4200 don't conform to the
-	  IrDA-USB device class specification, and therefore need their
-	  own specific driver. Those dongles support SIR and FIR (4Mbps)
-	  speeds. 
-
-	  To compile it as a module, choose M here: the module will be called
-	  stir4200.
-
-config NSC_FIR
-	tristate "NSC PC87108/PC87338"
-	depends on IRDA && ISA_DMA_API
-	help
-	  Say Y here if you want to build support for the NSC PC87108 and
-	  PC87338 IrDA chipsets.  This driver supports SIR,
-	  MIR and FIR (4Mbps) speeds.
-
-	  To compile it as a module, choose M here: the module will be called
-	  nsc-ircc.
-
-config WINBOND_FIR
-	tristate "Winbond W83977AF (IR)"
-	depends on IRDA && ISA_DMA_API
-	help
-	  Say Y here if you want to build IrDA support for the Winbond
-	  W83977AF super-io chipset.  This driver should be used for the IrDA
-	  chipset in the Corel NetWinder.  The driver supports SIR, MIR and
-	  FIR (4Mbps) speeds.
-
-	  To compile it as a module, choose M here: the module will be called
-	  w83977af_ir.
-
-config TOSHIBA_FIR
-	tristate "Toshiba Type-O IR Port"
-	depends on IRDA && PCI && !64BIT && VIRT_TO_BUS
-	help
-	  Say Y here if you want to build support for the Toshiba Type-O IR
-	  and Donau oboe chipsets. These chipsets are used by the Toshiba
-	  Libretto 100/110CT, Tecra 8100, Portege 7020 and many more laptops.
-	  To compile it as a module, choose M here: the module will be called
-	  donauboe.
-
-config AU1000_FIR
-	tristate "Alchemy IrDA SIR/FIR"
-	depends on IRDA && MIPS_ALCHEMY
-	help
-	  Say Y/M here to build support the IrDA peripheral on the
-	  Alchemy Au1000 and Au1100 SoCs.
-	  Say M to build a module; it will be called au1k_ir.ko
-
-config SMC_IRCC_FIR
-	tristate "SMSC IrCC"
-	depends on IRDA && ISA_DMA_API
-	help
-	  Say Y here if you want to build support for the SMC Infrared
-	  Communications Controller.  It is used in a wide variety of
-	  laptops (Fujitsu, Sony, Compaq and some Toshiba).
-	  To compile it as a module, choose M here: the module will be called
-	  smsc-ircc2.o.
-
-config ALI_FIR
-	tristate "ALi M5123 FIR"
-	depends on IRDA && ISA_DMA_API
-	help
-	  Say Y here if you want to build support for the ALi M5123 FIR
-	  Controller.  The ALi M5123 FIR Controller is embedded in ALi M1543C,
-	  M1535, M1535D, M1535+, M1535D South Bridge.  This driver supports
-	  SIR, MIR and FIR (4Mbps) speeds.
-
-	  To compile it as a module, choose M here: the module will be called
-	  ali-ircc.
-
-config VLSI_FIR
-	tristate "VLSI 82C147 SIR/MIR/FIR"
-	depends on IRDA && PCI
-	help
-	  Say Y here if you want to build support for the VLSI 82C147
-	  PCI-IrDA Controller. This controller is used by the HP OmniBook 800
-	  and 5500 notebooks. The driver provides support for SIR, MIR and
-	  FIR (4Mbps) speeds.
-
-	  To compile it as a module, choose M here: the module will be called
-	  vlsi_ir.
-
-config SA1100_FIR
-	tristate "SA1100 Internal IR"
-	depends on ARCH_SA1100 && IRDA && DMA_SA11X0
-
-config VIA_FIR
-	tristate "VIA VT8231/VT1211 SIR/MIR/FIR"
-	depends on IRDA && ISA_DMA_API
-	help
-	  Say Y here if you want to build support for the VIA VT8231
-	  and VIA VT1211 IrDA controllers, found on the motherboards using
-	  those VIA chipsets. To use this controller, you will need
-	  to plug a specific 5 pins FIR IrDA dongle in the specific
-	  motherboard connector. The driver provides support for SIR, MIR
-	  and FIR (4Mbps) speeds.
-
-	  You will need to specify the 'dongle_id' module parameter to
-	  indicate the FIR dongle attached to the controller.
-
-	  To compile it as a module, choose M here: the module will be called
-	  via-ircc.
-
-config PXA_FICP
-	tristate "Intel PXA2xx Internal FICP"
-	depends on ARCH_PXA && IRDA
-	help
-	  Say Y or M here if you want to build support for the PXA2xx
-	  built-in IRDA interface which can support both SIR and FIR.
-	  This driver relies on platform specific helper routines so
-	  available capabilities may vary from one PXA2xx target to
-	  another.
-
-config MCS_FIR
-	tristate "MosChip MCS7780 IrDA-USB dongle"
-	depends on IRDA && USB
-	select CRC32
-	help
-	  Say Y or M here if you want to build support for the MosChip
-	  MCS7780 IrDA-USB bridge device driver.
-
-	  USB bridge based on the MosChip MCS7780 don't conform to the
-	  IrDA-USB device class specification, and therefore need their
-	  own specific driver. Those dongles support SIR and FIR (4Mbps)
-	  speeds.
-
-	  To compile it as a module, choose M here: the module will be called
-	  mcs7780.
-
-endmenu
-

drivers/staging/irda/drivers/Makefile

-#
-# Makefile for the Linux IrDA infrared port device drivers.
-#
-# 9 Aug 2000, Christoph Hellwig <hch@infradead.org>
-# Rewritten to use lists instead of if-statements.
-#
-
-subdir-ccflags-y += -I$(srctree)/drivers/staging/irda/include
-
-# FIR drivers
-obj-$(CONFIG_USB_IRDA)		+= irda-usb.o
-obj-$(CONFIG_SIGMATEL_FIR)	+= stir4200.o
-obj-$(CONFIG_NSC_FIR)		+= nsc-ircc.o
-obj-$(CONFIG_WINBOND_FIR)	+= w83977af_ir.o
-obj-$(CONFIG_SA1100_FIR)	+= sa1100_ir.o
-obj-$(CONFIG_TOSHIBA_FIR)	+= donauboe.o
-obj-$(CONFIG_SMC_IRCC_FIR)	+= smsc-ircc2.o
-obj-$(CONFIG_ALI_FIR)		+= ali-ircc.o
-obj-$(CONFIG_VLSI_FIR)		+= vlsi_ir.o
-obj-$(CONFIG_VIA_FIR)		+= via-ircc.o
-obj-$(CONFIG_PXA_FICP)	        += pxaficp_ir.o
-obj-$(CONFIG_MCS_FIR)	        += mcs7780.o
-obj-$(CONFIG_AU1000_FIR)	+= au1k_ir.o
-# SIR drivers
-obj-$(CONFIG_IRTTY_SIR)		+= irtty-sir.o	sir-dev.o
-obj-$(CONFIG_BFIN_SIR)		+= bfin_sir.o
-obj-$(CONFIG_SH_SIR)		+= sh_sir.o
-# dongle drivers for SIR drivers
-obj-$(CONFIG_ESI_DONGLE)	+= esi-sir.o
-obj-$(CONFIG_TEKRAM_DONGLE)	+= tekram-sir.o
-obj-$(CONFIG_ACTISYS_DONGLE)	+= actisys-sir.o
-obj-$(CONFIG_LITELINK_DONGLE)	+= litelink-sir.o
-obj-$(CONFIG_GIRBIL_DONGLE)	+= girbil-sir.o
-obj-$(CONFIG_OLD_BELKIN_DONGLE)	+= old_belkin-sir.o
-obj-$(CONFIG_MCP2120_DONGLE)	+= mcp2120-sir.o
-obj-$(CONFIG_ACT200L_DONGLE)	+= act200l-sir.o
-obj-$(CONFIG_MA600_DONGLE)	+= ma600-sir.o
-obj-$(CONFIG_TOIM3232_DONGLE)	+= toim3232-sir.o
-obj-$(CONFIG_KINGSUN_DONGLE)	+= kingsun-sir.o
-obj-$(CONFIG_KSDAZZLE_DONGLE)	+= ksdazzle-sir.o
-obj-$(CONFIG_KS959_DONGLE)    	+= ks959-sir.o
-
-# The SIR helper module
-sir-dev-objs := sir_dev.o sir_dongle.o

drivers/staging/irda/drivers/act200l-sir.c

-/*********************************************************************
- *
- * Filename:      act200l.c
- * Version:       0.8
- * Description:   Implementation for the ACTiSYS ACT-IR200L dongle
- * Status:        Experimental.
- * Author:        SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>
- * Created at:    Fri Aug  3 17:35:42 2001
- * Modified at:   Fri Aug 17 10:22:40 2001
- * Modified by:   SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>
- *
- *     Copyright (c) 2001 SHIMIZU Takuya, All Rights Reserved.
- *
- *     This program is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- ********************************************************************/
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-
-#include "sir-dev.h"
-
-static int act200l_reset(struct sir_dev *dev);
-static int act200l_open(struct sir_dev *dev);
-static int act200l_close(struct sir_dev *dev);
-static int act200l_change_speed(struct sir_dev *dev, unsigned speed);
-
-/* Regsiter 0: Control register #1 */
-#define ACT200L_REG0    0x00
-#define ACT200L_TXEN    0x01 /* Enable transmitter */
-#define ACT200L_RXEN    0x02 /* Enable receiver */
-
-/* Register 1: Control register #2 */
-#define ACT200L_REG1    0x10
-#define ACT200L_LODB    0x01 /* Load new baud rate count value */
-#define ACT200L_WIDE    0x04 /* Expand the maximum allowable pulse */
-
-/* Register 4: Output Power register */
-#define ACT200L_REG4    0x40
-#define ACT200L_OP0     0x01 /* Enable LED1C output */
-#define ACT200L_OP1     0x02 /* Enable LED2C output */
-#define ACT200L_BLKR    0x04
-
-/* Register 5: Receive Mode register */
-#define ACT200L_REG5    0x50
-#define ACT200L_RWIDL   0x01 /* fixed 1.6us pulse mode */
-
-/* Register 6: Receive Sensitivity register #1 */
-#define ACT200L_REG6    0x60
-#define ACT200L_RS0     0x01 /* receive threshold bit 0 */
-#define ACT200L_RS1     0x02 /* receive threshold bit 1 */
-
-/* Register 7: Receive Sensitivity register #2 */
-#define ACT200L_REG7    0x70
-#define ACT200L_ENPOS   0x04 /* Ignore the falling edge */
-
-/* Register 8,9: Baud Rate Dvider register #1,#2 */
-#define ACT200L_REG8    0x80
-#define ACT200L_REG9    0x90
-
-#define ACT200L_2400    0x5f
-#define ACT200L_9600    0x17
-#define ACT200L_19200   0x0b
-#define ACT200L_38400   0x05
-#define ACT200L_57600   0x03
-#define ACT200L_115200  0x01
-
-/* Register 13: Control register #3 */
-#define ACT200L_REG13   0xd0
-#define ACT200L_SHDW    0x01 /* Enable access to shadow registers */
-
-/* Register 15: Status register */
-#define ACT200L_REG15   0xf0
-
-/* Register 21: Control register #4 */
-#define ACT200L_REG21   0x50
-#define ACT200L_EXCK    0x02 /* Disable clock output driver */
-#define ACT200L_OSCL    0x04 /* oscillator in low power, medium accuracy mode */
-
-static struct dongle_driver act200l = {
-	.owner		= THIS_MODULE,
-	.driver_name	= "ACTiSYS ACT-IR200L",
-	.type		= IRDA_ACT200L_DONGLE,
-	.open		= act200l_open,
-	.close		= act200l_close,
-	.reset		= act200l_reset,
-	.set_speed	= act200l_change_speed,
-};
-
-static int __init act200l_sir_init(void)
-{
-	return irda_register_dongle(&act200l);
-}
-
-static void __exit act200l_sir_cleanup(void)
-{
-	irda_unregister_dongle(&act200l);
-}
-
-static int act200l_open(struct sir_dev *dev)
-{
-	struct qos_info *qos = &dev->qos;
-
-	/* Power on the dongle */
-	sirdev_set_dtr_rts(dev, TRUE, TRUE);
-
-	/* Set the speeds we can accept */
-	qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
-	qos->min_turn_time.bits = 0x03;
-	irda_qos_bits_to_value(qos);
-
-	/* irda thread waits 50 msec for power settling */
-
-	return 0;
-}
-
-static int act200l_close(struct sir_dev *dev)
-{
-	/* Power off the dongle */
-	sirdev_set_dtr_rts(dev, FALSE, FALSE);
-
-	return 0;
-}
-
-/*
- * Function act200l_change_speed (dev, speed)
- *
- *    Set the speed for the ACTiSYS ACT-IR200L type dongle.
- *
- */
-static int act200l_change_speed(struct sir_dev *dev, unsigned speed)
-{
-	u8 control[3];
-	int ret = 0;
-
-	/* Clear DTR and set RTS to enter command mode */
-	sirdev_set_dtr_rts(dev, FALSE, TRUE);
-
-	switch (speed) {
-	default:
-		ret = -EINVAL;
-		/* fall through */
-	case 9600:
-		control[0] = ACT200L_REG8 |  (ACT200L_9600       & 0x0f);
-		control[1] = ACT200L_REG9 | ((ACT200L_9600 >> 4) & 0x0f);
-		break;
-	case 19200:
-		control[0] = ACT200L_REG8 |  (ACT200L_19200       & 0x0f);
-		control[1] = ACT200L_REG9 | ((ACT200L_19200 >> 4) & 0x0f);
-		break;
-	case 38400:
-		control[0] = ACT200L_REG8 |  (ACT200L_38400       & 0x0f);
-		control[1] = ACT200L_REG9 | ((ACT200L_38400 >> 4) & 0x0f);
-		break;
-	case 57600:
-		control[0] = ACT200L_REG8 |  (ACT200L_57600       & 0x0f);
-		control[1] = ACT200L_REG9 | ((ACT200L_57600 >> 4) & 0x0f);
-		break;
-	case 115200:
-		control[0] = ACT200L_REG8 |  (ACT200L_115200       & 0x0f);
-		control[1] = ACT200L_REG9 | ((ACT200L_115200 >> 4) & 0x0f);
-		break;
-	}
-	control[2] = ACT200L_REG1 | ACT200L_LODB | ACT200L_WIDE;
-
-	/* Write control bytes */
-	sirdev_raw_write(dev, control, 3);
-	msleep(5);
-
-	/* Go back to normal mode */
-	sirdev_set_dtr_rts(dev, TRUE, TRUE);
-
-	dev->speed = speed;
-	return ret;
-}
-
-/*
- * Function act200l_reset (driver)
- *
- *    Reset the ACTiSYS ACT-IR200L type dongle.
- */
-
-#define ACT200L_STATE_WAIT1_RESET	(SIRDEV_STATE_DONGLE_RESET+1)
-#define ACT200L_STATE_WAIT2_RESET	(SIRDEV_STATE_DONGLE_RESET+2)
-
-static int act200l_reset(struct sir_dev *dev)
-{
-	unsigned state = dev->fsm.substate;
-	unsigned delay = 0;
-	static const u8 control[9] = {
-		ACT200L_REG15,
-		ACT200L_REG13 | ACT200L_SHDW,
-		ACT200L_REG21 | ACT200L_EXCK | ACT200L_OSCL,
-		ACT200L_REG13,
-		ACT200L_REG7  | ACT200L_ENPOS,
-		ACT200L_REG6  | ACT200L_RS0  | ACT200L_RS1,
-		ACT200L_REG5  | ACT200L_RWIDL,
-		ACT200L_REG4  | ACT200L_OP0  | ACT200L_OP1 | ACT200L_BLKR,
-		ACT200L_REG0  | ACT200L_TXEN | ACT200L_RXEN
-	};
-	int ret = 0;
-
-	switch (state) {
-	case SIRDEV_STATE_DONGLE_RESET:
-		/* Reset the dongle : set RTS low for 25 ms */
-		sirdev_set_dtr_rts(dev, TRUE, FALSE);
-		state = ACT200L_STATE_WAIT1_RESET;
-		delay = 50;
-		break;
-
-	case ACT200L_STATE_WAIT1_RESET:
-		/* Clear DTR and set RTS to enter command mode */
-		sirdev_set_dtr_rts(dev, FALSE, TRUE);
-
-		udelay(25);			/* better wait for some short while */
-
-		/* Write control bytes */
-		sirdev_raw_write(dev, control, sizeof(control));
-		state = ACT200L_STATE_WAIT2_RESET;
-		delay = 15;
-		break;
-
-	case ACT200L_STATE_WAIT2_RESET:
-		/* Go back to normal mode */
-		sirdev_set_dtr_rts(dev, TRUE, TRUE);
-		dev->speed = 9600;
-		break;
-	default:
-		net_err_ratelimited("%s(), unknown state %d\n",
-				    __func__, state);
-		ret = -1;
-		break;
-	}
-	dev->fsm.substate = state;
-	return (delay > 0) ? delay : ret;
-}
-
-MODULE_AUTHOR("SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>");
-MODULE_DESCRIPTION("ACTiSYS ACT-IR200L dongle driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-10"); /* IRDA_ACT200L_DONGLE */
-
-module_init(act200l_sir_init);
-module_exit(act200l_sir_cleanup);

drivers/staging/irda/drivers/actisys-sir.c

-/*********************************************************************
- *                
- * Filename:      actisys.c
- * Version:       1.1
- * Description:   Implementation for the ACTiSYS IR-220L and IR-220L+ 
- *                dongles
- * Status:        Beta.
- * Authors:       Dag Brattli <dagb@cs.uit.no> (initially)
- *		  Jean Tourrilhes <jt@hpl.hp.com> (new version)
- *		  Martin Diehl <mad@mdiehl.de> (new version for sir_dev)
- * Created at:    Wed Oct 21 20:02:35 1998
- * Modified at:   Sun Oct 27 22:02:13 2002
- * Modified by:   Martin Diehl <mad@mdiehl.de>
- * 
- *     Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved.
- *     Copyright (c) 1999 Jean Tourrilhes
- *     Copyright (c) 2002 Martin Diehl
- *      
- *     This program is free software; you can redistribute it and/or 
- *     modify it under the terms of the GNU General Public License as 
- *     published by the Free Software Foundation; either version 2 of 
- *     the License, or (at your option) any later version.
- *  
- *     Neither Dag Brattli nor University of Tromsø admit liability nor
- *     provide warranty for any of this software. This material is 
- *     provided "AS-IS" and at no charge.
- *     
- ********************************************************************/
-
-/*
- * Changelog
- *
- * 0.8 -> 0.9999 - Jean
- *	o New initialisation procedure : much safer and correct
- *	o New procedure the change speed : much faster and simpler
- *	o Other cleanups & comments
- *	Thanks to Lichen Wang @ Actisys for his excellent help...
- *
- * 1.0 -> 1.1 - Martin Diehl
- *	modified for new sir infrastructure
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-
-#include "sir-dev.h"
-
-/* 
- * Define the timing of the pulses we send to the dongle (to reset it, and
- * to toggle speeds). Basically, the limit here is the propagation speed of
- * the signals through the serial port, the dongle being much faster.  Any
- * serial port support 115 kb/s, so we are sure that pulses 8.5 us wide can
- * go through cleanly . If you are on the wild side, you can try to lower
- * this value (Actisys recommended me 2 us, and 0 us work for me on a P233!)
- */
-#define MIN_DELAY 10	/* 10 us to be on the conservative side */
-
-static int actisys_open(struct sir_dev *);
-static int actisys_close(struct sir_dev *);
-static int actisys_change_speed(struct sir_dev *, unsigned);
-static int actisys_reset(struct sir_dev *);
-
-/* These are the baudrates supported, in the order available */
-/* Note : the 220L doesn't support 38400, but we will fix that below */
-static unsigned baud_rates[] = { 9600, 19200, 57600, 115200, 38400 };
-
-#define MAX_SPEEDS ARRAY_SIZE(baud_rates)
-
-static struct dongle_driver act220l = {
-	.owner		= THIS_MODULE,
-	.driver_name	= "Actisys ACT-220L",
-	.type		= IRDA_ACTISYS_DONGLE,
-	.open		= actisys_open,
-	.close		= actisys_close,
-	.reset		= actisys_reset,
-	.set_speed	= actisys_change_speed,
-};
-
-static struct dongle_driver act220l_plus = {
-	.owner		= THIS_MODULE,
-	.driver_name	= "Actisys ACT-220L+",
-	.type		= IRDA_ACTISYS_PLUS_DONGLE,
-	.open		= actisys_open,
-	.close		= actisys_close,
-	.reset		= actisys_reset,
-	.set_speed	= actisys_change_speed,
-};
-
-static int __init actisys_sir_init(void)
-{
-	int ret;
-
-	/* First, register an Actisys 220L dongle */
-	ret = irda_register_dongle(&act220l);
-	if (ret < 0)
-		return ret;
-
-	/* Now, register an Actisys 220L+ dongle */
-	ret = irda_register_dongle(&act220l_plus);
-	if (ret < 0) {
-		irda_unregister_dongle(&act220l);
-		return ret;
-	}
-	return 0;
-}
-
-static void __exit actisys_sir_cleanup(void)
-{
-	/* We have to remove both dongles */
-	irda_unregister_dongle(&act220l_plus);
-	irda_unregister_dongle(&act220l);
-}
-
-static int actisys_open(struct sir_dev *dev)
-{
-	struct qos_info *qos = &dev->qos;
-
-	sirdev_set_dtr_rts(dev, TRUE, TRUE);
-
-	/* Set the speeds we can accept */
-	qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
-
-	/* Remove support for 38400 if this is not a 220L+ dongle */
-	if (dev->dongle_drv->type == IRDA_ACTISYS_DONGLE)
-		qos->baud_rate.bits &= ~IR_38400;
-
-	qos->min_turn_time.bits = 0x7f; /* Needs 0.01 ms */
-	irda_qos_bits_to_value(qos);
-
-	/* irda thread waits 50 msec for power settling */
-
-	return 0;
-}
-
-static int actisys_close(struct sir_dev *dev)
-{
-	/* Power off the dongle */
-	sirdev_set_dtr_rts(dev, FALSE, FALSE);
-
-	return 0;
-}
-
-/*
- * Function actisys_change_speed (task)
- *
- *    Change speed of the ACTiSYS IR-220L and IR-220L+ type IrDA dongles.
- *    To cycle through the available baud rates, pulse RTS low for a few us.
- *
- *	First, we reset the dongle to always start from a known state.
- *	Then, we cycle through the speeds by pulsing RTS low and then up.
- *	The dongle allow us to pulse quite fast, se we can set speed in one go,
- * which is must faster ( < 100 us) and less complex than what is found
- * in some other dongle drivers...
- *	Note that even if the new speed is the same as the current speed,
- * we reassert the speed. This make sure that things are all right,
- * and it's fast anyway...
- *	By the way, this function will work for both type of dongles,
- * because the additional speed is at the end of the sequence...
- */
-static int actisys_change_speed(struct sir_dev *dev, unsigned speed)
-{
-	int ret = 0;
-	int i = 0;
-
-	pr_debug("%s(), speed=%d (was %d)\n", __func__, speed, dev->speed);
-
-	/* dongle was already resetted from irda_request state machine,
-	 * we are in known state (dongle default)
-	 */
-
-	/* 
-	 * Now, we can set the speed requested. Send RTS pulses until we
-         * reach the target speed 
-	 */
-	for (i = 0; i < MAX_SPEEDS; i++) {
-		if (speed == baud_rates[i]) {
-			dev->speed = speed;
-			break;
-		}
-		/* Set RTS low for 10 us */
-		sirdev_set_dtr_rts(dev, TRUE, FALSE);
-		udelay(MIN_DELAY);
-
-		/* Set RTS high for 10 us */
-		sirdev_set_dtr_rts(dev, TRUE, TRUE);
-		udelay(MIN_DELAY);
-	}
-
-	/* Check if life is sweet... */
-	if (i >= MAX_SPEEDS) {
-		actisys_reset(dev);
-		ret = -EINVAL;  /* This should not happen */
-	}
-
-	/* Basta lavoro, on se casse d'ici... */
-	return ret;
-}
-
-/*
- * Function actisys_reset (task)
- *
- *      Reset the Actisys type dongle. Warning, this function must only be
- *      called with a process context!
- *
- * We need to do two things in this function :
- *	o first make sure that the dongle is in a state where it can operate
- *	o second put the dongle in a know state
- *
- *	The dongle is powered of the RTS and DTR lines. In the dongle, there
- * is a big capacitor to accommodate the current spikes. This capacitor
- * takes a least 50 ms to be charged. In theory, the Bios set those lines
- * up, so by the time we arrive here we should be set. It doesn't hurt
- * to be on the conservative side, so we will wait...
- * <Martin : move above comment to irda_config_fsm>
- *	Then, we set the speed to 9600 b/s to get in a known state (see in
- * change_speed for details). It is needed because the IrDA stack
- * has tried to set the speed immediately after our first return,
- * so before we can be sure the dongle is up and running.
- */
-
-static int actisys_reset(struct sir_dev *dev)
-{
-	/* Reset the dongle : set DTR low for 10 us */
-	sirdev_set_dtr_rts(dev, FALSE, TRUE);
-	udelay(MIN_DELAY);
-
-	/* Go back to normal mode */
-	sirdev_set_dtr_rts(dev, TRUE, TRUE);
-	
-	dev->speed = 9600;	/* That's the default */
-
-	return 0;
-}
-
-MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no> - Jean Tourrilhes <jt@hpl.hp.com>");
-MODULE_DESCRIPTION("ACTiSYS IR-220L and IR-220L+ dongle driver");	
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-2"); /* IRDA_ACTISYS_DONGLE */
-MODULE_ALIAS("irda-dongle-3"); /* IRDA_ACTISYS_PLUS_DONGLE */
-
-module_init(actisys_sir_init);
-module_exit(actisys_sir_cleanup);

drivers/staging/irda/drivers/ali-ircc.h

-/*********************************************************************
- *                
- * Filename:      ali-ircc.h
- * Version:       0.5
- * Description:   Driver for the ALI M1535D and M1543C FIR Controller
- * Status:        Experimental.
- * Author:        Benjamin Kong <benjamin_kong@ali.com.tw>
- * Created at:    2000/10/16 03:46PM
- * Modified at:   2001/1/3 02:56PM
- * Modified by:   Benjamin Kong <benjamin_kong@ali.com.tw>
- * 
- *     Copyright (c) 2000 Benjamin Kong <benjamin_kong@ali.com.tw>
- *     All Rights Reserved
- *      
- *     This program is free software; you can redistribute it and/or 
- *     modify it under the terms of the GNU General Public License as 
- *     published by the Free Software Foundation; either version 2 of 
- *     the License, or (at your option) any later version.
- *  
- ********************************************************************/
-
-#ifndef ALI_IRCC_H
-#define ALI_IRCC_H
-
-#include <linux/ktime.h>
-
-#include <linux/spinlock.h>
-#include <linux/pm.h>
-#include <linux/types.h>
-#include <asm/io.h>
-
-/* SIR Register */
-/* Usr definition of linux/serial_reg.h */
-
-/* FIR Register */
-#define BANK0		0x20
-#define BANK1		0x21
-#define BANK2		0x22
-#define BANK3		0x23
-
-#define FIR_MCR		0x07	/* Master Control Register */
-
-/* Bank 0 */
-#define FIR_DR		0x00	/* Alias 0, FIR Data Register (R/W) */ 
-#define FIR_IER		0x01	/* Alias 1, FIR Interrupt Enable Register (R/W) */
-#define FIR_IIR		0x02	/* Alias 2, FIR Interrupt Identification Register (Read only) */
-#define FIR_LCR_A	0x03	/* Alias 3, FIR Line Control Register A (R/W) */
-#define FIR_LCR_B	0x04	/* Alias 4, FIR Line Control Register B (R/W) */
-#define FIR_LSR		0x05	/* Alias 5, FIR Line Status Register (R/W) */
-#define FIR_BSR		0x06	/* Alias 6, FIR Bus Status Register (Read only) */
-
-
-	/* Alias 1 */
-	#define	IER_FIFO	0x10	/* FIR FIFO Interrupt Enable */	
-	#define	IER_TIMER	0x20 	/* Timer Interrupt Enable */ 
-	#define	IER_EOM		0x40	/* End of Message Interrupt Enable */
-	#define IER_ACT		0x80	/* Active Frame Interrupt Enable */
-	
-	/* Alias 2 */
-	#define IIR_FIFO	0x10	/* FIR FIFO Interrupt */
-	#define IIR_TIMER	0x20	/* Timer Interrupt */
-	#define IIR_EOM		0x40	/* End of Message Interrupt */
-	#define IIR_ACT		0x80	/* Active Frame Interrupt */	
-	
-	/* Alias 3 */
-	#define LCR_A_FIFO_RESET 0x80	/* FIFO Reset */
-
-	/* Alias 4 */
-	#define	LCR_B_BW	0x10	/* Brick Wall */
-	#define LCR_B_SIP	0x20	/* SIP Enable */
-	#define	LCR_B_TX_MODE 	0x40	/* Transmit Mode */
-	#define LCR_B_RX_MODE	0x80	/* Receive Mode */
-	
-	/* Alias 5 */	
-	#define LSR_FIR_LSA	0x00	/* FIR Line Status Address */
-	#define LSR_FRAME_ABORT	0x08	/* Frame Abort */
-	#define LSR_CRC_ERROR	0x10	/* CRC Error */
-	#define LSR_SIZE_ERROR	0x20	/* Size Error */
-	#define LSR_FRAME_ERROR	0x40	/* Frame Error */
-	#define LSR_FIFO_UR	0x80	/* FIFO Underrun */
-	#define LSR_FIFO_OR	0x80	/* FIFO Overrun */
-		
-	/* Alias 6 */
-	#define BSR_FIFO_NOT_EMPTY	0x80	/* FIFO Not Empty */
-	
-/* Bank 1 */
-#define	FIR_CR		0x00 	/* Alias 0, FIR Configuration Register (R/W) */
-#define FIR_FIFO_TR	0x01   	/* Alias 1, FIR FIFO Threshold Register (R/W) */
-#define FIR_DMA_TR	0x02	/* Alias 2, FIR DMA Threshold Register (R/W) */
-#define FIR_TIMER_IIR	0x03	/* Alias 3, FIR Timer interrupt interval register (W/O) */
-#define FIR_FIFO_FR	0x03	/* Alias 3, FIR FIFO Flag register (R/O) */
-#define FIR_FIFO_RAR	0x04 	/* Alias 4, FIR FIFO Read Address register (R/O) */
-#define FIR_FIFO_WAR	0x05	/* Alias 5, FIR FIFO Write Address register (R/O) */
-#define FIR_TR		0x06	/* Alias 6, Test REgister (W/O) */
-
-	/* Alias 0 */
-	#define CR_DMA_EN	0x01	/* DMA Enable */
-	#define CR_DMA_BURST	0x02	/* DMA Burst Mode */
-	#define CR_TIMER_EN 	0x08	/* Timer Enable */
-	
-	/* Alias 3 */
-	#define TIMER_IIR_500	0x00	/* 500 us */
-	#define TIMER_IIR_1ms	0x01	/* 1   ms */
-	#define TIMER_IIR_2ms	0x02	/* 2   ms */
-	#define TIMER_IIR_4ms	0x03	/* 4   ms */
-	
-/* Bank 2 */
-#define FIR_IRDA_CR	0x00	/* Alias 0, IrDA Control Register (R/W) */
-#define FIR_BOF_CR	0x01	/* Alias 1, BOF Count Register (R/W) */
-#define FIR_BW_CR	0x02	/* Alias 2, Brick Wall Count Register (R/W) */
-#define FIR_TX_DSR_HI	0x03	/* Alias 3, TX Data Size Register (high) (R/W) */
-#define FIR_TX_DSR_LO	0x04	/* Alias 4, TX Data Size Register (low) (R/W) */
-#define FIR_RX_DSR_HI	0x05	/* Alias 5, RX Data Size Register (high) (R/W) */
-#define FIR_RX_DSR_LO	0x06	/* Alias 6, RX Data Size Register (low) (R/W) */
-	
-	/* Alias 0 */
-	#define IRDA_CR_HDLC1152 0x80	/* 1.152Mbps HDLC Select */
-	#define IRDA_CR_CRC	0X40	/* CRC Select. */
-	#define IRDA_CR_HDLC	0x20	/* HDLC select. */
-	#define IRDA_CR_HP_MODE 0x10	/* HP mode (read only) */
-	#define IRDA_CR_SD_ST	0x08	/* SD/MODE State.  */
-	#define IRDA_CR_FIR_SIN 0x04	/* FIR SIN Select. */
-	#define IRDA_CR_ITTX_0	0x02	/* SOUT State. IRTX force to 0 */
-	#define IRDA_CR_ITTX_1	0x03	/* SOUT State. IRTX force to 1 */
-	
-/* Bank 3 */
-#define FIR_ID_VR	0x00	/* Alias 0, FIR ID Version Register (R/O) */
-#define FIR_MODULE_CR	0x01	/* Alias 1, FIR Module Control Register (R/W) */
-#define FIR_IO_BASE_HI	0x02	/* Alias 2, FIR Higher I/O Base Address Register (R/O) */
-#define FIR_IO_BASE_LO	0x03	/* Alias 3, FIR Lower I/O Base Address Register (R/O) */
-#define FIR_IRQ_CR	0x04	/* Alias 4, FIR IRQ Channel Register (R/O) */
-#define FIR_DMA_CR	0x05	/* Alias 5, FIR DMA Channel Register (R/O) */
-
-struct ali_chip {
-	char *name;
-	int cfg[2];
-	unsigned char entr1;
-	unsigned char entr2;
-	unsigned char cid_index;
-	unsigned char cid_value;
-	int (*probe)(struct ali_chip *chip, chipio_t *info);
-	int (*init)(struct ali_chip *chip, chipio_t *info); 
-};
-typedef struct ali_chip ali_chip_t;
-
-
-/* DMA modes needed */
-#define DMA_TX_MODE     0x08    /* Mem to I/O, ++, demand. */
-#define DMA_RX_MODE     0x04    /* I/O to mem, ++, demand. */
-
-#define MAX_TX_WINDOW 	7
-#define MAX_RX_WINDOW 	7
-
-#define TX_FIFO_Threshold	8
-#define RX_FIFO_Threshold	1
-#define TX_DMA_Threshold	1
-#define RX_DMA_Threshold	1
-
-/* For storing entries in the status FIFO */
-
-struct st_fifo_entry {
-	int status;
-	int len;
-};
-
-struct st_fifo {
-	struct st_fifo_entry entries[MAX_RX_WINDOW];
-	int pending_bytes;
-	int head;
-	int tail;
-	int len;
-};
-
-struct frame_cb {
-	void *start; /* Start of frame in DMA mem */
-	int len;     /* Length of frame in DMA mem */
-};
-
-struct tx_fifo {
-	struct frame_cb queue[MAX_TX_WINDOW]; /* Info about frames in queue */
-	int             ptr;                  /* Currently being sent */
-	int             len;                  /* Length of queue */
-	int             free;                 /* Next free slot */
-	void           *tail;                 /* Next free start in DMA mem */
-};
-
-/* Private data for each instance */
-struct ali_ircc_cb {
-
-	struct st_fifo st_fifo;    /* Info about received frames */
-	struct tx_fifo tx_fifo;    /* Info about frames to be transmitted */
-
-	struct net_device *netdev;     /* Yes! we are some kind of netdevice */
-	
-	struct irlap_cb *irlap;    /* The link layer we are binded to */
-	struct qos_info qos;       /* QoS capabilities for this device */
-	
-	chipio_t io;               /* IrDA controller information */
-	iobuff_t tx_buff;          /* Transmit buffer */
-	iobuff_t rx_buff;          /* Receive buffer */
-	dma_addr_t tx_buff_dma;
-	dma_addr_t rx_buff_dma;
-
-	__u8 ier;                  /* Interrupt enable register */
-	
-	__u8 InterruptID;	   /* Interrupt ID */	
-	__u8 BusStatus;		   /* Bus Status */	
-	__u8 LineStatus;	   /* Line Status */	
-	
-	unsigned char rcvFramesOverflow;
-		
-	ktime_t stamp;
-
-	spinlock_t lock;           /* For serializing operations */
-	
-	__u32 new_speed;
-	int index;                 /* Instance index */
-	
-	unsigned char fifo_opti_buf;
-};
-
-static inline void switch_bank(int iobase, int bank)
-{
-		outb(bank, iobase+FIR_MCR);
-}
-
-#endif /* ALI_IRCC_H */

drivers/staging/irda/drivers/bfin_sir.h

-/*
- * Blackfin Infra-red Driver
- *
- * Copyright 2006-2009 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
- *
- */
-
-#include <linux/serial.h>
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/slab.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/wrapper.h>
-#include <net/irda/irda_device.h>
-
-#include <asm/irq.h>
-#include <asm/cacheflush.h>
-#include <asm/dma.h>
-#include <asm/portmux.h>
-#undef DRIVER_NAME
-
-#ifdef CONFIG_SIR_BFIN_DMA
-struct dma_rx_buf {
-	char *buf;
-	int head;
-	int tail;
-};
-#endif
-
-struct bfin_sir_port {
-	unsigned char __iomem   *membase;
-	unsigned int            irq;
-	unsigned int            lsr;
-	unsigned long           clk;
-	struct net_device       *dev;
-#ifdef CONFIG_SIR_BFIN_DMA
-	int                     tx_done;
-	struct dma_rx_buf       rx_dma_buf;
-	struct timer_list       rx_dma_timer;
-	int                     rx_dma_nrows;
-#endif
-	unsigned int            tx_dma_channel;
-	unsigned int            rx_dma_channel;
-};
-
-struct bfin_sir_port_res {
-	unsigned long   base_addr;
-	int             irq;
-	unsigned int    rx_dma_channel;
-	unsigned int    tx_dma_channel;
-};
-
-struct bfin_sir_self {
-	struct bfin_sir_port    *sir_port;
-	spinlock_t              lock;
-	unsigned int            open;
-	int                     speed;
-	int                     newspeed;
-
-	struct sk_buff          *txskb;
-	struct sk_buff          *rxskb;
-	struct net_device_stats stats;
-	struct device           *dev;
-	struct irlap_cb         *irlap;
-	struct qos_info         qos;
-
-	iobuff_t                tx_buff;
-	iobuff_t                rx_buff;
-
-	struct work_struct      work;
-	int                     mtt;
-};
-
-#define DRIVER_NAME "bfin_sir"
-
-#include <asm/bfin_serial.h>
-
-static const unsigned short per[][4] = {
-	/* rx pin      tx pin     NULL  uart_number */
-	{P_UART0_RX, P_UART0_TX,    0,    0},
-	{P_UART1_RX, P_UART1_TX,    0,    1},
-	{P_UART2_RX, P_UART2_TX,    0,    2},
-	{P_UART3_RX, P_UART3_TX,    0,    3},
-};

drivers/staging/irda/drivers/donauboe.h

-/*********************************************************************
- *                
- * Filename:      toshoboe.h
- * Version:       2.16
- * Description:   Driver for the Toshiba OBOE (or type-O or 701)
- *                FIR Chipset, also supports the DONAUOBOE (type-DO
- *                or d01) FIR chipset which as far as I know is
- *                register compatible.
- * Status:        Experimental.
- * Author:        James McKenzie <james@fishsoup.dhs.org>
- * Created at:    Sat May 8  12:35:27 1999
- * Modified: 2.16 Martin Lucina <mato@kotelna.sk>
- * Modified: 2.16 Sat Jun 22 18:54:29 2002 (sync headers)
- * Modified: 2.17 Christian Gennerat <christian.gennerat@polytechnique.org>
- * Modified: 2.17 jeu sep 12 08:50:20 2002 (add lock to be used by spinlocks)
- * 
- *     Copyright (c) 1999 James McKenzie, All Rights Reserved.
- *      
- *     This program is free software; you can redistribute it and/or 
- *     modify it under the terms of the GNU General Public License as 
- *     published by the Free Software Foundation; either version 2 of 
- *     the License, or (at your option) any later version.
- *  
- *     Neither James McKenzie nor Cambridge University admit liability nor
- *     provide warranty for any of this software. This material is 
- *     provided "AS-IS" and at no charge.
- * 
- *     Applicable Models : Libretto 100/110CT and many more.
- *     Toshiba refers to this chip as the type-O IR port,
- *     or the type-DO IR port.
- *
- * IrDA chip set list from Toshiba Computer Engineering Corp.
- * model			method	maker	controller		Version 
- * Portege 320CT	FIR,SIR Toshiba Oboe(Triangle) 
- * Portege 3010CT	FIR,SIR Toshiba Oboe(Sydney) 
- * Portege 3015CT	FIR,SIR Toshiba Oboe(Sydney) 
- * Portege 3020CT	FIR,SIR Toshiba Oboe(Sydney) 
- * Portege 7020CT	FIR,SIR ?		?
- * 
- * Satell. 4090XCDT	FIR,SIR ?		?
- * 
- * Libretto 100CT	FIR,SIR Toshiba Oboe 
- * Libretto 1000CT	FIR,SIR Toshiba Oboe 
- * 
- * TECRA750DVD		FIR,SIR Toshiba Oboe(Triangle)	REV ID=14h 
- * TECRA780			FIR,SIR Toshiba Oboe(Sandlot)	REV ID=32h,33h 
- * TECRA750CDT		FIR,SIR Toshiba Oboe(Triangle)	REV ID=13h,14h 
- * TECRA8000		FIR,SIR Toshiba Oboe(ISKUR)		REV ID=23h 
- * 
- ********************************************************************/
-
-/* The documentation for this chip is allegedly released         */
-/* However I have not seen it, not have I managed to contact     */
-/* anyone who has. HOWEVER the chip bears a striking resemblance */
-/* to the IrDA controller in the Toshiba RISC TMPR3922 chip      */
-/* the documentation for this is freely available at             */
-/* http://www.madingley.org/james/resources/toshoboe/TMPR3922.pdf */
-/* The mapping between the registers in that document and the    */
-/* Registers in the 701 oboe chip are as follows    */
-
-
-/* 3922 reg     701 regs, by bit numbers                        */
-/*               7- 0  15- 8  24-16  31-25                      */
-/* $28            0x0    0x1                                    */
-/* $2c                                     SEE NOTE 1           */
-/* $30            0x6    0x7                                    */
-/* $34            0x8    0x9               SEE NOTE 2           */
-/* $38           0x10   0x11                                    */
-/* $3C                   0xe               SEE NOTE 3           */
-/* $40           0x12   0x13                                    */
-/* $44           0x14   0x15                                    */
-/* $48           0x16   0x17                                    */
-/* $4c           0x18   0x19                                    */
-/* $50           0x1a   0x1b                                    */
-
-/* FIXME: could be 0x1b 0x1a here */
-
-/* $54           0x1d   0x1c                                    */
-/* $5C           0xf                       SEE NOTE 4           */
-/* $130                                    SEE NOTE 5           */
-/* $134                                    SEE NOTE 6           */
-/*                                                              */
-/* NOTES:                                                       */
-/* 1. The pointer to ring is packed in most unceremoniusly      */
-/*    701 Register      Address bits    (A9-A0 must be zero)    */
-/*            0x4:      A17 A16 A15 A14 A13 A12 A11 A10         */
-/*            0x5:      A25 A24 A23 A22 A21 A20 A19 A18         */
-/*            0x2:        0   0 A31 A30 A29 A28 A27 A26         */
-/*                                                              */
-/* 2. The M$ drivers do a write 0x1 to 0x9, however the 3922    */
-/*    documentation would suggest that a write of 0x1 to 0x8    */
-/*    would be more appropriate.                                */
-/*                                                              */
-/* 3. This assignment is tenuous at best, register 0xe seems to */
-/*    have bits arranged 0 0 0 R/W R/W R/W R/W R/W              */
-/*    if either of the lower two bits are set the chip seems to */
-/*    switch off                                                */
-/*                                                              */
-/* 4. Bits 7-4 seem to be different 4 seems just to be generic  */
-/*    receiver busy flag                                        */
-/*                                                              */
-/* 5. and 6. The IER and ISR have a different bit assignment    */
-/*    The lower three bits of both read back as ones            */
-/* ISR is register 0xc, IER is register 0xd                     */
-/*           7      6      5      4      3      2      1      0 */
-/* 0xc: TxDone RxDone TxUndr RxOver SipRcv      1      1      1 */
-/* 0xd: TxDone RxDone TxUndr RxOver SipRcv      1      1      1 */
-/* TxDone xmitt done (generated only if generate interrupt bit  */
-/*   is set in the ring)                                        */
-/* RxDone recv completed (or other recv condition if you set it */
-/*   up                                                         */
-/* TxUnder underflow in Transmit FIFO                           */
-/* RxOver  overflow in Recv FIFO                                */
-/* SipRcv  received serial gap  (or other condition you set)    */
-/* Interrupts are enabled by writing a one to the IER register  */
-/* Interrupts are cleared by writing a one to the ISR register */
-/*                                                              */
-/* 6. The remaining registers: 0x6 and 0x3 appear to be         */
-/*    reserved parts of 16 or 32 bit registersthe remainder     */
-/*    0xa 0xb 0x1e 0x1f could possibly be (by their behaviour)  */
-/*    the Unicast Filter register at $58.                       */
-/*                                                              */
-/* 7. While the core obviously expects 32 bit accesses all the  */
-/*    M$ drivers do 8 bit accesses, infact the Miniport ones    */
-/*    write and read back the byte serveral times (why?)        */
-
-
-#ifndef TOSHOBOE_H
-#define TOSHOBOE_H
-
-/* Registers */
-
-#define OBOE_IO_EXTENT	0x1f
-
-/*Receive and transmit slot pointers */
-#define OBOE_REG(i)	(i+(self->base))
-#define OBOE_RXSLOT	OBOE_REG(0x0)
-#define OBOE_TXSLOT	OBOE_REG(0x1)
-#define OBOE_SLOT_MASK	0x3f
-
-#define OBOE_TXRING_OFFSET		0x200
-#define OBOE_TXRING_OFFSET_IN_SLOTS	0x40
-
-/*pointer to the ring */
-#define OBOE_RING_BASE0	OBOE_REG(0x4)
-#define OBOE_RING_BASE1	OBOE_REG(0x5)
-#define OBOE_RING_BASE2	OBOE_REG(0x2)
-#define OBOE_RING_BASE3	OBOE_REG(0x3)
-
-/*Number of slots in the ring */
-#define OBOE_RING_SIZE  OBOE_REG(0x7)
-#define OBOE_RING_SIZE_RX4	0x00
-#define OBOE_RING_SIZE_RX8	0x01
-#define OBOE_RING_SIZE_RX16	0x03
-#define OBOE_RING_SIZE_RX32	0x07
-#define OBOE_RING_SIZE_RX64	0x0f
-#define OBOE_RING_SIZE_TX4	0x00
-#define OBOE_RING_SIZE_TX8	0x10
-#define OBOE_RING_SIZE_TX16	0x30
-#define OBOE_RING_SIZE_TX32	0x70
-#define OBOE_RING_SIZE_TX64	0xf0
-
-#define OBOE_RING_MAX_SIZE	64
-
-/*Causes the gubbins to re-examine the ring */
-#define OBOE_PROMPT	OBOE_REG(0x9)
-#define OBOE_PROMPT_BIT		0x1
-
-/* Interrupt Status Register */
-#define OBOE_ISR	OBOE_REG(0xc)
-/* Interrupt Enable Register */
-#define OBOE_IER	OBOE_REG(0xd)
-/* Interrupt bits for IER and ISR */
-#define OBOE_INT_TXDONE		0x80
-#define OBOE_INT_RXDONE		0x40
-#define OBOE_INT_TXUNDER	0x20
-#define OBOE_INT_RXOVER		0x10
-#define OBOE_INT_SIP		0x08
-#define OBOE_INT_MASK		0xf8
-
-/*Reset Register */
-#define OBOE_CONFIG1	OBOE_REG(0xe)
-#define OBOE_CONFIG1_RST	0x01
-#define OBOE_CONFIG1_DISABLE	0x02
-#define OBOE_CONFIG1_4		0x08
-#define OBOE_CONFIG1_8		0x08
-
-#define OBOE_CONFIG1_ON		0x8
-#define OBOE_CONFIG1_RESET	0xf
-#define OBOE_CONFIG1_OFF	0xe
-
-#define OBOE_STATUS	OBOE_REG(0xf)
-#define OBOE_STATUS_RXBUSY	0x10
-#define OBOE_STATUS_FIRRX	0x04
-#define OBOE_STATUS_MIRRX	0x02
-#define OBOE_STATUS_SIRRX	0x01
-
-
-/*Speed control registers */
-#define OBOE_CONFIG0L	OBOE_REG(0x10)
-#define OBOE_CONFIG0H	OBOE_REG(0x11)
-
-#define OBOE_CONFIG0H_TXONLOOP  0x80 /*Transmit when looping (dangerous) */
-#define OBOE_CONFIG0H_LOOP	0x40 /*Loopback Tx->Rx */
-#define OBOE_CONFIG0H_ENTX	0x10 /*Enable Tx */
-#define OBOE_CONFIG0H_ENRX	0x08 /*Enable Rx */
-#define OBOE_CONFIG0H_ENDMAC	0x04 /*Enable/reset* the DMA controller */
-#define OBOE_CONFIG0H_RCVANY	0x02 /*DMA mode 1=bytes, 0=dwords */
-
-#define OBOE_CONFIG0L_CRC16	0x80 /*CRC 1=16 bit 0=32 bit */
-#define OBOE_CONFIG0L_ENFIR	0x40 /*Enable FIR */
-#define OBOE_CONFIG0L_ENMIR	0x20 /*Enable MIR */
-#define OBOE_CONFIG0L_ENSIR	0x10 /*Enable SIR */
-#define OBOE_CONFIG0L_ENSIRF	0x08 /*Enable SIR framer */
-#define OBOE_CONFIG0L_SIRTEST	0x04 /*Enable SIR framer in MIR and FIR */
-#define OBOE_CONFIG0L_INVERTTX  0x02 /*Invert Tx Line */
-#define OBOE_CONFIG0L_INVERTRX  0x01 /*Invert Rx Line */
-
-#define OBOE_BOF	OBOE_REG(0x12)
-#define OBOE_EOF	OBOE_REG(0x13)
-
-#define OBOE_ENABLEL	OBOE_REG(0x14)
-#define OBOE_ENABLEH	OBOE_REG(0x15)
-
-#define OBOE_ENABLEH_PHYANDCLOCK	0x80 /*Toggle low to copy config in */
-#define OBOE_ENABLEH_CONFIGERR		0x40
-#define OBOE_ENABLEH_FIRON		0x20
-#define OBOE_ENABLEH_MIRON		0x10
-#define OBOE_ENABLEH_SIRON		0x08
-#define OBOE_ENABLEH_ENTX		0x04
-#define OBOE_ENABLEH_ENRX		0x02
-#define OBOE_ENABLEH_CRC16		0x01
-
-#define OBOE_ENABLEL_BROADCAST		0x01
-
-#define OBOE_CURR_PCONFIGL		OBOE_REG(0x16) /*Current config */
-#define OBOE_CURR_PCONFIGH		OBOE_REG(0x17)
-
-#define OBOE_NEW_PCONFIGL		OBOE_REG(0x18)
-#define OBOE_NEW_PCONFIGH		OBOE_REG(0x19)
-
-#define OBOE_PCONFIGH_BAUDMASK		0xfc
-#define OBOE_PCONFIGH_WIDTHMASK		0x04
-#define OBOE_PCONFIGL_WIDTHMASK		0xe0
-#define OBOE_PCONFIGL_PREAMBLEMASK	0x1f
-
-#define OBOE_PCONFIG_BAUDMASK		0xfc00
-#define OBOE_PCONFIG_BAUDSHIFT		10
-#define OBOE_PCONFIG_WIDTHMASK		0x04e0
-#define OBOE_PCONFIG_WIDTHSHIFT		5
-#define OBOE_PCONFIG_PREAMBLEMASK	0x001f
-#define OBOE_PCONFIG_PREAMBLESHIFT	0
-
-#define OBOE_MAXLENL			OBOE_REG(0x1a)
-#define OBOE_MAXLENH			OBOE_REG(0x1b)
-
-#define OBOE_RXCOUNTH			OBOE_REG(0x1c) /*Reset on recipt */
-#define OBOE_RXCOUNTL			OBOE_REG(0x1d) /*of whole packet */
-
-/* The PCI ID of the OBOE chip */
-#ifndef PCI_DEVICE_ID_FIR701
-#define PCI_DEVICE_ID_FIR701 	0x0701
-#endif
-
-#ifndef PCI_DEVICE_ID_FIRD01
-#define PCI_DEVICE_ID_FIRD01 	0x0d01
-#endif
-
-struct OboeSlot
-{
-  __u16 len;                    /*Tweleve bits of packet length */
-  __u8 unused;
-  __u8 control;                 /*Slot control/status see below */
-  __u32 address;                /*Slot buffer address */
-}
-__packed;
-
-#define OBOE_NTASKS OBOE_TXRING_OFFSET_IN_SLOTS
-
-struct OboeRing
-{
-  struct OboeSlot rx[OBOE_NTASKS];
-  struct OboeSlot tx[OBOE_NTASKS];
-};
-
-#define OBOE_RING_LEN (sizeof(struct OboeRing))
-
-
-#define OBOE_CTL_TX_HW_OWNS	0x80 /*W/R This slot owned by the hardware */
-#define OBOE_CTL_TX_DISTX_CRC	0x40 /*W Disable CRC generation for [FM]IR */
-#define OBOE_CTL_TX_BAD_CRC     0x20 /*W Generate bad CRC */
-#define OBOE_CTL_TX_SIP		0x10   /*W Generate an SIP after xmittion */
-#define OBOE_CTL_TX_MKUNDER	0x08 /*W Generate an underrun error */
-#define OBOE_CTL_TX_RTCENTX	0x04 /*W Enable receiver and generate TXdone */
-     /*  After this slot is processed        */
-#define OBOE_CTL_TX_UNDER	0x01  /*R Set by hardware to indicate underrun */
-
-
-#define OBOE_CTL_RX_HW_OWNS	0x80 /*W/R This slot owned by hardware */
-#define OBOE_CTL_RX_PHYERR	0x40 /*R Decoder error on receiption */
-#define OBOE_CTL_RX_CRCERR	0x20 /*R CRC error only set for [FM]IR */
-#define OBOE_CTL_RX_LENGTH	0x10 /*R Packet > max Rx length  */
-#define OBOE_CTL_RX_OVER	0x08   /*R set to indicate an overflow */
-#define OBOE_CTL_RX_SIRBAD	0x04 /*R SIR had BOF in packet or ABORT sequence */
-#define OBOE_CTL_RX_RXEOF	0x02  /*R Finished receiving on this slot */
-
-
-struct toshoboe_cb
-{
-  struct net_device *netdev;    /* Yes! we are some kind of netdevice */
-  struct tty_driver ttydev;
-
-  struct irlap_cb *irlap;       /* The link layer we are binded to */
-
-  chipio_t io;                  /* IrDA controller information */
-  struct qos_info qos;          /* QoS capabilities for this device */
-
-  __u32 flags;                  /* Interface flags */
-
-  struct pci_dev *pdev;         /*PCI device */
-  int base;                     /*IO base */
-
-
-  int txpending;                /*how many tx's are pending */
-  int txs, rxs;                 /*Which slots are we at  */
-
-  int irdad;                    /*Driver under control of netdev end  */
-  int async;                    /*Driver under control of async end   */
-
-
-  int stopped;                  /*Stopped by some or other APM stuff */
-
-  int filter;                   /*In SIR mode do we want to receive
-                                   frames or byte ranges */
-
-  void *ringbuf;                /*The ring buffer */
-  struct OboeRing *ring;        /*The ring */
-
-  void *tx_bufs[OBOE_RING_MAX_SIZE]; /*The buffers   */
-  void *rx_bufs[OBOE_RING_MAX_SIZE];
-
-
-  int speed;                    /*Current setting of the speed */
-  int new_speed;                /*Set to request a speed change */
-
-/* The spinlock protect critical parts of the driver.
- *	Locking is done like this :
- *		spin_lock_irqsave(&self->spinlock, flags);
- *	Releasing the lock :
- *		spin_unlock_irqrestore(&self->spinlock, flags);
- */
-  spinlock_t spinlock;		
-  /* Used for the probe and diagnostics code */
-  int int_rx;
-  int int_tx;
-  int int_txunder;
-  int int_rxover;
-  int int_sip;
-};
-
-
-#endif

drivers/staging/irda/drivers/irtty-sir.h

-/*********************************************************************
- *
- *	sir_tty.h:	definitions for the irtty_sir client driver (former irtty)
- *
- *	Copyright (c) 2002 Martin Diehl
- *
- *	This program is free software; you can redistribute it and/or 
- *	modify it under the terms of the GNU General Public License as 
- *	published by the Free Software Foundation; either version 2 of 
- *	the License, or (at your option) any later version.
- *
- ********************************************************************/
-
-#ifndef IRTTYSIR_H
-#define IRTTYSIR_H
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>		// chipio_t
-
-#define IRTTY_IOC_MAGIC 'e'
-#define IRTTY_IOCTDONGLE  _IO(IRTTY_IOC_MAGIC, 1)
-#define IRTTY_IOCGET     _IOR(IRTTY_IOC_MAGIC, 2, struct irtty_info)
-#define IRTTY_IOC_MAXNR   2
-
-struct sirtty_cb {
-	magic_t magic;
-
-	struct sir_dev *dev;
-	struct tty_struct  *tty;
-
-	chipio_t io;               /* IrDA controller information */
-};
-
-#endif

drivers/staging/irda/drivers/smsc-sio.h

-#ifndef SMSC_SIO_H
-#define SMSC_SIO_H
-
-/******************************************
- Keys. They should work with every SMsC SIO
- ******************************************/
-
-#define SMSCSIO_CFGACCESSKEY		0x55
-#define SMSCSIO_CFGEXITKEY			0xaa
-
-/*****************************
- * Generic SIO Flat (!?)     *
- *****************************/
- 
-/* Register 0x0d */
-#define SMSCSIOFLAT_DEVICEID_REG				0x0d
-
-/* Register 0x0c */
-#define SMSCSIOFLAT_UARTMODE0C_REG				0x0c
-#define 	SMSCSIOFLAT_UART2MODE_MASK			0x38
-#define 	SMSCSIOFLAT_UART2MODE_VAL_COM		0x00
-#define 	SMSCSIOFLAT_UART2MODE_VAL_IRDA		0x08
-#define 	SMSCSIOFLAT_UART2MODE_VAL_ASKIR		0x10
-
-/* Register 0x25 */
-#define SMSCSIOFLAT_UART2BASEADDR_REG			0x25
-
-/* Register 0x2b */
-#define SMSCSIOFLAT_FIRBASEADDR_REG				0x2b
-
-/* Register 0x2c */
-#define SMSCSIOFLAT_FIRDMASELECT_REG			0x2c
-#define 	SMSCSIOFLAT_FIRDMASELECT_MASK		0x0f
-
-/* Register 0x28 */
-#define SMSCSIOFLAT_UARTIRQSELECT_REG			0x28
-#define 	SMSCSIOFLAT_UART2IRQSELECT_MASK		0x0f
-#define 	SMSCSIOFLAT_UART1IRQSELECT_MASK		0xf0
-#define 	SMSCSIOFLAT_UARTIRQSELECT_VAL_NONE	0x00
-
-
-/*********************
- * LPC47N227         *
- *********************/
-
-#define LPC47N227_CFGACCESSKEY		0x55
-#define LPC47N227_CFGEXITKEY		0xaa
-
-/* Register 0x00 */
-#define LPC47N227_FDCPOWERVALIDCONF_REG		0x00
-#define 	LPC47N227_FDCPOWER_MASK			0x08
-#define 	LPC47N227_VALID_MASK				0x80
-
-/* Register 0x02 */
-#define LPC47N227_UART12POWER_REG				0x02
-#define 	LPC47N227_UART1POWERDOWN_MASK		0x08
-#define 	LPC47N227_UART2POWERDOWN_MASK		0x80
-
-/* Register 0x07 */
-#define LPC47N227_APMBOOTDRIVE_REG				0x07
-#define 	LPC47N227_PARPORT2AUTOPWRDOWN_MASK	0x10 /* auto power down on if set */
-#define 	LPC47N227_UART2AUTOPWRDOWN_MASK	0x20 /* auto power down on if set */
-#define 	LPC47N227_UART1AUTOPWRDOWN_MASK	0x40 /* auto power down on if set */
-
-/* Register 0x0c */
-#define LPC47N227_UARTMODE0C_REG				0x0c
-#define 	LPC47N227_UART2MODE_MASK			0x38
-#define 	LPC47N227_UART2MODE_VAL_COM		0x00
-#define 	LPC47N227_UART2MODE_VAL_IRDA		0x08
-#define 	LPC47N227_UART2MODE_VAL_ASKIR		0x10
-
-/* Register 0x0d */
-#define LPC47N227_DEVICEID_REG					0x0d
-#define 	LPC47N227_DEVICEID_DEFVAL			0x5a
-
-/* Register 0x0e */
-#define LPC47N227_REVISIONID_REG				0x0e
-
-/* Register 0x25 */
-#define LPC47N227_UART2BASEADDR_REG			0x25
-
-/* Register 0x28 */
-#define LPC47N227_UARTIRQSELECT_REG			0x28
-#define 	LPC47N227_UART2IRQSELECT_MASK		0x0f
-#define 	LPC47N227_UART1IRQSELECT_MASK		0xf0
-#define 	LPC47N227_UARTIRQSELECT_VAL_NONE	0x00
-
-/* Register 0x2b */
-#define LPC47N227_FIRBASEADDR_REG				0x2b
-
-/* Register 0x2c */
-#define LPC47N227_FIRDMASELECT_REG				0x2c
-#define 	LPC47N227_FIRDMASELECT_MASK		0x0f
-#define 	LPC47N227_FIRDMASELECT_VAL_DMA1	0x01 /* 47n227 has three dma channels */
-#define 	LPC47N227_FIRDMASELECT_VAL_DMA2	0x02
-#define 	LPC47N227_FIRDMASELECT_VAL_DMA3	0x03
-#define 	LPC47N227_FIRDMASELECT_VAL_NONE	0x0f
-
-
-#endif

drivers/staging/irda/net/ircomm/Kconfig

-config IRCOMM
-	tristate "IrCOMM protocol"
-	depends on IRDA && TTY
-	help
-	  Say Y here if you want to build support for the IrCOMM protocol.
-	  To compile it as modules, choose M here: the modules will be
-	  called ircomm and ircomm_tty.
-	  IrCOMM implements serial port emulation, and makes it possible to
-	  use all existing applications that understands TTY's with an
-	  infrared link.  Thus you should be able to use application like PPP,
-	  minicom and others.
-