wl12xx: use split scan for normal scan

Split scan allows the FW to schedule other activities
during a scan which may be a long operation. This is
achieved by setting a trigger TID to ANY_TID and a scan
trigger timeout other than 0. The default one is set to 50ms.
Signed-off-by: NEyal Shapira <eyal@wizey.com>
Signed-off-by: NIgal Chernobelsky <igalc@ti.com>
Signed-off-by: NEliad Peller <eliad@wizery.com>
Signed-off-by: NLuciano Coelho <coelho@ti.com>

drivers/net/wireless/wl12xx/conf.h

@@ -1082,6 +1082,14 @@ struct conf_scan_settings {
 	 */
 	u16 num_probe_reqs;
 
+	/*
+	 * Scan trigger (split scan) timeout. The FW will split the scan
+	 * operation into slices of the given time and allow the FW to schedule
+	 * other tasks in between.
+	 *
+	 * Range: u32 Microsecs
+	 */
+	u32 split_scan_timeout;
 };
 
 struct conf_sched_scan_settings {

drivers/net/wireless/wl12xx/main.c

@@ -272,6 +272,7 @@ static struct conf_drv_settings default_conf = {
 		.min_dwell_time_passive       = 100000,
 		.max_dwell_time_passive       = 100000,
 		.num_probe_reqs               = 2,
+		.split_scan_timeout           = 50000,
 	},
 	.sched_scan = {
 		/* sched_scan requires dwell times in TU instead of TU/1000 */

drivers/net/wireless/wl12xx/scan.c

@@ -172,6 +172,9 @@ static int wl1271_scan_send(struct wl1271 *wl, struct ieee80211_vif *vif,
 		goto out;
 	}
 
+	if (wl->conf.scan.split_scan_timeout)
+		scan_options |= WL1271_SCAN_OPT_SPLIT_SCAN;
+
 	if (passive)
 		scan_options |= WL1271_SCAN_OPT_PASSIVE;
 
@@ -198,7 +201,7 @@ static int wl1271_scan_send(struct wl1271 *wl, struct ieee80211_vif *vif,
 
 	cmd->params.tx_rate = cpu_to_le32(basic_rate);
 	cmd->params.n_probe_reqs = wl->conf.scan.num_probe_reqs;
-	cmd->params.tid_trigger = 0;
+	cmd->params.tid_trigger = CONF_TX_AC_ANY_TID;
 	cmd->params.scan_tag = WL1271_SCAN_DEFAULT_TAG;
 
 	if (band == IEEE80211_BAND_2GHZ)
@@ -223,8 +226,7 @@ static int wl1271_scan_send(struct wl1271 *wl, struct ieee80211_vif *vif,
 		goto out;
 	}
 
-	/* disable the timeout */
-	trigger->timeout = 0;
+	trigger->timeout = cpu_to_le32(wl->conf.scan.split_scan_timeout);
 	ret = wl1271_cmd_send(wl, CMD_TRIGGER_SCAN_TO, trigger,
 			      sizeof(*trigger), 0);
 	if (ret < 0) {

drivers/net/wireless/wl12xx/scan.h

@@ -48,7 +48,7 @@ void wl1271_scan_sched_scan_results(struct wl1271 *wl);
 #define WL1271_SCAN_CURRENT_TX_PWR     0
 #define WL1271_SCAN_OPT_ACTIVE         0
 #define WL1271_SCAN_OPT_PASSIVE	       1
-#define WL1271_SCAN_OPT_TRIGGERED_SCAN 2
+#define WL1271_SCAN_OPT_SPLIT_SCAN     2
 #define WL1271_SCAN_OPT_PRIORITY_HIGH  4
 /* scan even if we fail to enter psm */
 #define WL1271_SCAN_OPT_FORCE          8