[ARM] 4509/1: S3C: Create initial arch/arm/plat-s3c

Create the initial arch/arm/plat-s3c directory and start
linking it into the arch/arm build heirarchy ready to
receive the generic parts of the S3C24XX support to be
used when adding S3C6400 devices.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/arm/Kconfig

@@ -432,6 +432,7 @@ source "arch/arm/mach-omap1/Kconfig"
 source "arch/arm/mach-omap2/Kconfig"
 
 source "arch/arm/plat-s3c24xx/Kconfig"
+source "arch/arm/plat-s3c/Kconfig"
 
 if ARCH_S3C2410
 source "arch/arm/mach-s3c2400/Kconfig"

arch/arm/plat-s3c/Kconfig

+# arch/arm/plat-s3c/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+config PLAT_S3C
+	bool
+	depends on ARCH_S3C2410
+	default y if ARCH_S3C2410
+	select NO_IOPORT
+	help
+	  Base platform code for any Samsung S3C device
+
+comment "Boot options"
+
+config S3C2410_BOOT_WATCHDOG
+	bool "S3C2410 Initialisation watchdog"
+	depends on PLAT_S3C && S3C2410_WATCHDOG
+	help
+	  Say y to enable the watchdog during the kernel decompression
+	  stage. If the kernel fails to uncompress, then the watchdog
+	  will trigger a reset and the system should restart.
+
+config S3C2410_BOOT_ERROR_RESET
+	bool "S3C2410 Reboot on decompression error"
+	depends on PLAT_S3C
+	help
+	  Say y here to use the watchdog to reset the system if the
+	  kernel decompressor detects an error during decompression.
+
+comment "Power management"
+
+config S3C2410_PM_DEBUG
+	bool "S3C2410 PM Suspend debug"
+	depends on PLAT_S3C && PM
+	help
+	  Say Y here if you want verbose debugging from the PM Suspend and
+	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+	  for more information.
+
+config S3C2410_PM_CHECK
+	bool "S3C2410 PM Suspend Memory CRC"
+	depends on PLAT_S3C && PM && CRC32
+	help
+ 	  Enable the PM code's memory area checksum over sleep. This option
+	  will generate CRCs of all blocks of memory, and store them before
+	  going to sleep. The blocks are then checked on resume for any
+	  errors.
+
+	  Note, this can take several seconds depending on memory size
+	  and CPU speed.
+
+	  See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+
+config S3C2410_PM_CHECK_CHUNKSIZE
+	int "S3C2410 PM Suspend CRC Chunksize (KiB)"
+	depends on PLAT_S3C && PM && S3C2410_PM_CHECK
+	default 64
+	help
+	  Set the chunksize in Kilobytes of the CRC for checking memory
+	  corruption over suspend and resume. A smaller value will mean that
+	  the CRC data block will take more memory, but wil identify any
+	  faults with better precision.
+
+	  See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+
+config S3C2410_LOWLEVEL_UART_PORT
+	int "S3C2410 UART to use for low-level messages"
+	depends on PLAT_S3C
+	default 0
+	help
+	  Choice of which UART port to use for the low-level messages,
+	  such as the `Uncompressing...` at start time. The value of
+	  this configuration should be between zero and two. The port
+	  must have been initialised by the boot-loader before use.

arch/arm/plat-s3c24xx/Kconfig

@@ -10,7 +10,7 @@ config PLAT_S3C24XX
 	default y if ARCH_S3C2410
 	select NO_IOPORT
 	help
-	  Base platform code for any Samsung S3C device
+	  Base platform code for any Samsung S3C24XX device
 
 if PLAT_S3C24XX
 
@@ -26,64 +26,6 @@ config PM_SIMTEC
 	  Common power management code for systems that are
 	  compatible with the Simtec style of power management
 
-config S3C2410_BOOT_WATCHDOG
-	bool "S3C2410 Initialisation watchdog"
-	depends on ARCH_S3C2410 && S3C2410_WATCHDOG
-	help
-	  Say y to enable the watchdog during the kernel decompression
-	  stage. If the kernel fails to uncompress, then the watchdog
-	  will trigger a reset and the system should restart.
-
-config S3C2410_BOOT_ERROR_RESET
-	bool "S3C2410 Reboot on decompression error"
-	depends on ARCH_S3C2410
-	help
-	  Say y here to use the watchdog to reset the system if the
-	  kernel decompressor detects an error during decompression.
-
-config S3C2410_PM_DEBUG
-	bool "S3C2410 PM Suspend debug"
-	depends on ARCH_S3C2410 && PM
-	help
-	  Say Y here if you want verbose debugging from the PM Suspend and
-	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
-	  for more information.
-
-config S3C2410_PM_CHECK
-	bool "S3C2410 PM Suspend Memory CRC"
-	depends on ARCH_S3C2410 && PM && CRC32
-	help
- 	  Enable the PM code's memory area checksum over sleep. This option
-	  will generate CRCs of all blocks of memory, and store them before
-	  going to sleep. The blocks are then checked on resume for any
-	  errors.
-
-	  Note, this can take several seconds depending on memory size
-	  and CPU speed.
-
-	  See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
-
-config S3C2410_PM_CHECK_CHUNKSIZE
-	int "S3C2410 PM Suspend CRC Chunksize (KiB)"
-	depends on ARCH_S3C2410 && PM && S3C2410_PM_CHECK
-	default 64
-	help
-	  Set the chunksize in Kilobytes of the CRC for checking memory
-	  corruption over suspend and resume. A smaller value will mean that
-	  the CRC data block will take more memory, but wil identify any
-	  faults with better precision.
-
-	  See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
-
-config S3C2410_LOWLEVEL_UART_PORT
-	int "S3C2410 UART to use for low-level messages"
-	default 0
-	help
-	  Choice of which UART port to use for the low-level messages,
-	  such as the `Uncompressing...` at start time. The value of
-	  this configuration should be between zero and two. The port
-	  must have been initialised by the boot-loader before use.
-
 config S3C2410_DMA
 	bool "S3C2410 DMA support"
 	depends on ARCH_S3C2410